summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2009-01-29rt2x00: Add mesh supportAndrey Yurovsky
This adds initial support for Mesh Point mode. For this we tell mac80211 that we support NL80211_IFTYPE_MESH_POINT. We also need to send beacons. mac80211 will configure our RX filter accordingly. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Restrict interface between rt2x00link and driversIvo van Doorn
Restrict drivers to only access link_qual structure during link tuning. The contents of these fields are for the drivers and all fields are allowed to be changed to values the driver considers correct. This means that some fields need to be moved outside of this structure to restrict access only to rt2x00link itself. This allows some code to be moved outside of the rt2x00.h header and into rt2x00link.c. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Reduce calls to bbp_read()Ivo van Doorn
The link_tuner() function will always call bbp_read() at the start of the function. Because this is an indirect register access has some costs attached to it (especially for USB hardware). We already store the value read from the register into the vgc_level value inside the link structure. Instead of reading from the register we can read that field directly and base the tuner on that value. This reduces the time the registers are locked with the csr_mutex and speeds up the link_tuner processing. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Move link tuning into seperate fileIvo van Doorn
Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Implement PowersavingIvo van Doorn
Listen to IEEE80211_CONF_PS to determine if the device should drop into powersaving mode. This feature depends on the dynamic power save functionality in mac80211. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Use 64bit atomic register access for TSFMichael Buesch
On modern b43 devices with core rev >=3, the hardware guarantees us an atomic 64bit read/write of the TSF, if we access the lower 32bits first. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Fixup set_key handlingMichael Buesch
This fixes the key handling for mac80211's new key->flags. It also adds TX locking to the set_key handler and adds a comment why this is required. This doesn't fix any known bugs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-01-23rtl8187: Add termination packet to prevent stallLarry Finger
The RTL8187 and RTL8187B devices can stall unless an explicit termination packet is sent. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-23iwlwifi: fix rs_get_rate WARN_ON()Abbas, Mohamed
In ieee80211_sta structure there is u64 supp_rates[IEEE80211_NUM_BANDS] this is filled with all support rate from assoc_resp. If we associate with G-band AP only supp_rates of G-band will be set the other band supp_rates will be set to 0. If the user type this command this will cause mac80211 to set to new channel, mac80211 does not disassociate in setting new channel, so the active band is now A-band. then in handling the new essid mac80211 will kick in the assoc steps which involve sending disassociation frame. in this mac80211 will WARN_ON sta->supp_rates[A_BAND] == 0. This fixes: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1822 http://www.kerneloops.org/searchweek.php?search=rs_get_rate Signed-off-by: mohamed abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-23p54usb: fix packet loss with first generation devicesChristian Lamparter
Artur Skawina confirmed that the first generation devices needs the same URB_ZERO_PACKET flag, in oder to finish the pending transfer properly. The second generation has been successfully fixed by "p54usb: fix random traffic stalls (LM87)" (43af18f06d5) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22iwlwifi: return NETDEV_TX_OK from _tx opsReinette Chatre
be consistent with mac80211 drivers and return correct return code. NETDEV_TX_OK is 0, but we need to be consistent wrt formatting amongst implementations re: http://marc.info/?l=linux-wireless&m=123119327419865&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22zd1211rw: adding Sitecom WL-603 (0df6:0036) to the USB id listHin-Tak Leung
Giuseppe Cala <jiveaxe@gmail.com> (The second "a" in "Cala" should be a grave, U+00E0) reported success on zd1211-devs@lists.sourceforge.net. The chip info is: zd1211b chip 0df6:0036 v4810 high 00-0c-f6 AL2230_RF pa0 g--N- The Sitecom WL-603 is detected as a zd1211b with a AL2230 RF transceiver chip. Signed-off-by: Giuseppe Cala <jiveaxe@gmail.com> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54usb: fix nasty use after freeChristian Lamparter
In theory, the firmware acks the received a data frame, before signaling the driver to free it again. However Artur Skawina <art.08.09@gmail.com> has shown that it can happen in reverse order as well. This is very bad and could lead to memory corruptions, oopses and panics. Thanks to Artur Skawina <art.08.09@gmail.com> for reporting and debugging this issue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Artur Skawina <art.08.09@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54: more cryptographic accelerator fixesChristian Lamparter
If we let the firmware do the data encryption, we have to remove the ICV and (M)MIC at the end of the frame before we can give it back to mac80211. Or, these data frames have a few trailing bytes on cooked monitor interfaces. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54: add missing break in eeprom parserChr
This patch fixes a obvious memory leak in the eeprom parser. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22orinoco: use KERN_DEBUG for link status messagesPavel Roskin
KERN_INFO is too "loud" for messages that are generated by the ordinary events, such as accociation. Use of KERN_DEBUG is consistent with mac80211. Suggested by Michael Gilbert <michael.s.gilbert@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22rt2x00: Fix TX rate short preamble detectionIvo van Doorn
Mac80211 provides 2 structures to handle bitrates, namely ieee80211_rate and ieee80211_tx_rate. To determine the short preamble mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did). This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-By: Chris Clayton <chris2553@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22orinoco: move kmalloc(..., GFP_KERNEL) outside spinlock in ↵Andrey Borzenkov
orinoco_ioctl_set_genie [ 56.923623] BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slub.c:1599 [ 56.923644] in_atomic(): 0, irqs_disabled(): 1, pid: 3031, name: wpa_supplicant [ 56.923656] 2 locks held by wpa_supplicant/3031: [ 56.923662] #0: (rtnl_mutex){--..}, at: [<c02abd1f>] rtnl_lock+0xf/0x20 [ 56.923703] #1: (&priv->lock){++..}, at: [<dfc840c2>] orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.923782] irq event stamp: 910 [ 56.923788] hardirqs last enabled at (909): [<c01957db>] __kmalloc+0x7b/0x140 [ 56.923820] hardirqs last disabled at (910): [<c0309419>] _spin_lock_irqsave+0x19/0x80 [ 56.923847] softirqs last enabled at (880): [<c0124f54>] __do_softirq+0xc4/0x110 [ 56.923865] softirqs last disabled at (871): [<c01049ae>] do_softirq+0x8e/0xe0 [ 56.923895] Pid: 3031, comm: wpa_supplicant Not tainted 2.6.29-rc2-1avb #1 [ 56.923905] Call Trace: [ 56.923919] [<c01049ae>] ? do_softirq+0x8e/0xe0 [ 56.923941] [<c011ad12>] __might_sleep+0xd2/0x100 [ 56.923952] [<c0195837>] __kmalloc+0xd7/0x140 [ 56.923963] [<c030946a>] ? _spin_lock_irqsave+0x6a/0x80 [ 56.923981] [<dfc840e9>] ? orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.923999] [<dfc840c2>] ? orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.924017] [<dfc840e9>] orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.924036] [<c0209325>] ? copy_from_user+0x35/0x130 [ 56.924061] [<c02ffd96>] ioctl_standard_call+0x196/0x380 [ 56.924085] [<c029f945>] ? __dev_get_by_name+0x85/0xb0 [ 56.924096] [<c02ff88f>] wext_handle_ioctl+0x14f/0x230 [ 56.924113] [<dfc84070>] ? orinoco_ioctl_set_genie+0x0/0x130 [orinoco] [ 56.924132] [<c02a3da5>] dev_ioctl+0x495/0x570 [ 56.924155] [<c0293e05>] ? sys_sendto+0xa5/0xd0 [ 56.924171] [<c0142fe8>] ? mark_held_locks+0x48/0x90 [ 56.924183] [<c0292880>] ? sock_ioctl+0x0/0x280 [ 56.924193] [<c029297d>] sock_ioctl+0xfd/0x280 [ 56.924203] [<c0292880>] ? sock_ioctl+0x0/0x280 [ 56.924235] [<c01a51d0>] vfs_ioctl+0x20/0x80 [ 56.924246] [<c01a53e2>] do_vfs_ioctl+0x72/0x570 [ 56.924257] [<c0293e62>] ? sys_send+0x32/0x40 [ 56.924268] [<c02947c0>] ? sys_socketcall+0x1d0/0x2a0 [ 56.924280] [<c010339f>] ? sysenter_exit+0xf/0x16 [ 56.924292] [<c01a5919>] sys_ioctl+0x39/0x70 [ 56.924302] [<c0103371>] sysenter_do_call+0x12/0x31 Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-21net: constify VFTsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21usbnet: allow type check of devdbg arguments in non-debug buildSteve Glendinning
Improve usbnet's devdbg to always type-check diagnostic arguments, like dev_dbg (device.h). This makes no change to the resulting size of usbnet modules. This patch also removes an #ifdef DEBUG directive from rndis_wlan so it's devdbg statements are always type-checked at compile time. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-16p54: fix p54_set_key's return codeChristian Lamparter
p54 doesn't support AES-128-CMAC offload. This patch will fix the noisy mac80211 warnings, when 802.11w is enabled: mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22) mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16p54: set_tim must be atomic.Artur Skawina
Fix for: BUG: scheduling while atomic: named/2004/0x10000200 Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45 Call Trace: [<c04d4ef7>] schedule+0x2a7/0x320 [<c03aed74>] __alloc_skb+0x34/0x110 [<c011f5b3>] __cond_resched+0x13/0x30 [<c04d501d>] _cond_resched+0x2d/0x40 [<c016d8c5>] kmem_cache_alloc+0x95/0xc0 [<c016b8d4>] check_object+0xc4/0x230 [<c03aed74>] __alloc_skb+0x34/0x110 [<c02ede91>] p54_alloc_skb+0x71/0xf0 [<c02ee36f>] p54_set_tim+0x3f/0xa0 [<c04ae064>] sta_info_set_tim_bit+0x64/0x80 [<c04c1017>] invoke_tx_handlers+0xd57/0xd80 [<c016c397>] free_debug_processing+0x197/0x210 [<c03ae215>] pskb_expand_head+0xf5/0x170 [<c04bfd94>] __ieee80211_tx_prepare+0x164/0x2f0 [<c04c1a8d>] ieee80211_skb_resize+0x6d/0xe0 [<c04c250f>] ieee80211_master_start_xmit+0x23f/0x550 [<c016d188>] __slab_alloc+0x2b8/0x4f0 [<c013a711>] getnstimeofday+0x51/0x120 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240 [<c03c6a4b>] __qdisc_run+0x1ab/0x200 [<c0136aa1>] __run_hrtimer+0x31/0xf0 [<c03b6247>] dev_queue_xmit+0x247/0x500 [<c04c1e56>] ieee80211_subif_start_xmit+0x356/0x7d0 [<c0466ff7>] packet_rcv_spkt+0x37/0x150 [<c0466ff7>] packet_rcv_spkt+0x37/0x150 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240 [<c03c6a4b>] __qdisc_run+0x1ab/0x200 [<c03b6247>] dev_queue_xmit+0x247/0x500 [<c03bc1e2>] neigh_resolve_output+0xe2/0x200 [<c0410080>] ip_finish_output+0x0/0x290 [<c0410267>] ip_finish_output+0x1e7/0x290 [<c040f355>] ip_local_out+0x15/0x20 [<c040f5d2>] ip_push_pending_frames+0x272/0x380 [<c042bbc6>] udp_push_pending_frames+0x146/0x3a0 [<c042d52a>] udp_sendmsg+0x2fa/0x6b0 [<c0433bc7>] inet_sendmsg+0x37/0x70 [<c03a7b7e>] sock_sendmsg+0xbe/0x100 [<c0133cd0>] autoremove_wake_function+0x0/0x50 [<c011c043>] __wake_up_common+0x43/0x70 [<c024a892>] copy_from_user+0x32/0x130 [<c024a892>] copy_from_user+0x32/0x130 [<c03b001e>] verify_iovec+0x2e/0xb0 [<c03a7d3f>] sys_sendmsg+0x17f/0x290 [<c017730a>] pipe_write+0x29a/0x570 [<c013a172>] update_wall_time+0x492/0x8e0 [<c013a711>] getnstimeofday+0x51/0x120 [<c011b05d>] sched_slice+0x3d/0x80 [<c013a711>] getnstimeofday+0x51/0x120 [<c0136657>] hrtimer_forward+0x147/0x1a0 [<c01101b0>] lapic_next_event+0x10/0x20 [<c013ccb3>] clockevents_program_event+0xa3/0x170 [<c03a9054>] sys_socketcall+0xa4/0x290 [<c0110920>] smp_apic_timer_interrupt+0x40/0x70 [<c0103165>] sysenter_do_call+0x12/0x25 Signed-off-by: Artur Skawina <art.08.09@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16rt2x00: fix a wrong parameter for __test_and_clear_bit() in rt2x00rfkill_free().Rami Rosen
When running modprobe rt73usb, and then rmmod rt73usb, and then iwconfig, the wlan0 device does not disappear. When repeating this process again, we get a kernel Oops errors and "BUG: unable to handle kernel paging request..." message in the kernel log. The reason for this is that there is an error in rt2x00rfkill_free(), which is called in the process of removing the device (rt2x00lib_remove_dev() in rt2x00dev.c). rt2x00rfkill_free() clears the RFKILL_STATE_ALLOCATED bit , which is bit number 1 () in rt2x00dev->flags instead of in rt2x00dev->rfkill_state. As a result, when checking the DEVICE_STATE_REGISTERED_HW bit (bit number 1 in rt2x00dev->flags) in rt2x00lib_remove_hw() it is **unset**, and we wrongly **don't** call ieee80211_unregister_hw(). This patch corrects this: the parameter for __test_and_clear_bit() in rt2x00rfkill_free() should be &rt2x00dev->rfkill_state and not &rt2x00dev->flags. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16iwlwifi: remove CMD_WANT_SKB flag if send_cmd_sync failureZhu Yi
In function iwl_send_cmd_sync(), if the flag CMD_WANT_SKB is set but we are not provided with a valid SKB (cmd->meta.u.skb == NULL), we need to remove the CMD_WANT_SKB flag from the TX cmd queue. Otherwise in case the cmd comes in later, it will possibly set an invalid address. Thus it causes an invalid memory access. This fixed the bug http://bugzilla.kernel.org/show_bug.cgi?id=11326. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16ath9k: Fix an operator typo in REG_DOMAIN_2GHZ_MASKJouni Malinen
Incorrect operator causes the REG_DOMAIN_2GHZ_MASK to be zero which surely was not the goal of this definition. Mask out the 11a flags correctly. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16ath9k: Fix an operator typo in phy rate validationJouni Malinen
This was not supposed to be a bitwise AND operation, but a check of two separate conditions. Anyway, the old code happened to result in the same behavior, so this is just changing the code to be easier to understand and also to keep sparse from warning about dubious operators. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16libertas: Fix alignment issues in libertas coreAndrey Yurovsky
Data structures that come over the wire from the WLAN firmware must be packed. This fixes alignment problems on the blackfin architecture and, reportedly, on the AVR32. This is a replacement for the previous version of this patch which had also explicitly used get_unaligned_ macros. As Johannes Berg pointed out, these macros were unnecessary. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16p54: fix oops caused by bad eepromsChristian Lamparter
This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted. BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: p54_assign_address+0x108/0x15d [p54common] Oops: 0002 [#1] SMP Pid: 12988, comm: phy1 Tainted: P W 2.6.28-rc6-wl #3 RIP: 0010: p54_assign_address+0x108/0x15d [p54common] [...] Call Trace: p54_alloc_skb+0xa3/0xc0 [p54common] p54_scan+0x37/0x204 [p54common] [...] Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13p54: fix "‘ret’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13iwl3945: fix "‘power_idx’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’: drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13b43legacy: fix "‘up_dev’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13b43: fix "‘gmode’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/b43/main.c: In function ‘b43_op_config’: drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12libertas_tf: return NETDEV_TX_OK in TX opAndrey Yurovsky
The TX op should return NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix rt2500usb HW crypto: WEP 128 & AESIvo van Doorn
The TXD_W0_CIPHER field is a 1-bit field. It only acts as boolean value to indicate if the frame must be encrypted or not. The way rt2x00_set_field32() worked it would grab the least signifcant bit from txdesc->cipher and use that as value. Because of that WEP 64 and TKIP worked since they had odd-numbered values, while WEP 128 and AES were even numbers and didn't work. Correctly booleanize the txdecs->cipher value to allow the hardware to encrypt the outgoing data. After this we can enable HW crypto by default again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath5k: fix return values from ath5k_txBob Copeland
Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change any current functionality). Changes-licensed-under: 3-Clause-BSD Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rtl8187: Fix module so that rmmod/insmod does not errorJohannes Berg
Due to misunderstanding of the returned values allowed for the tx callback of mac80211, rtl8187 was using skb's that had been freed. This problem was triggered when the module was sujected to a rmmod/insmod cycle. After that was fixed, the modules would not work after the rmmod/insmod cycle until the USB device was reset. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54: fix WARN_ON at line 2247 of net/mac80211/rx.cChristian Lamparter
This patch hopefully fixes a mac80211<->p54 interaction problem, which was described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 ) I guess the warning was triggered by pending frames in the receive queue, while we're doing a band change 5GHz. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath5k: Correct usage of AR5K_CFG_ADHOCSteve Brown
This corrects usage of AR5K_CFG_ADHOC introduced in "ath5k: Update PCU code". Also, the name of the indicator is changed to AR5K_CFG_IBSS to more accurately reflect its function. This change restores beaconing in AP and mesh modes. Signed-off-by: Steve Brown <sbrown@cortland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Revert fix to TX status reporting for retries and MCS indexJouni Malinen
This patch reverts "ath9k: Fix TX status reporting for retries and MCS index" because that change ended up breaking ath9k rate control. While the MCS index reporting to mac80211 was indeed fixed by the patch, it did not take into account that the ath9k rate control algorithm was updating private tables based on this index and the index comes through the rate control API call, i.e., based on mac80211 TX status call. In addition, it looks like the "fix" to remove +1 from TX status 'count' field was not correct based on ieee80211_tx_status() implementation that counts the total of count values, but starting from -1, not 0. The TX status reporting for frames using MCS needs to be fixed somehow, but it does not look like there is any easy fix for the ath9k rate control algorithm, so the best option now seems to be to revert the change and bring it back once the rate control code is cleaned up to handle this better. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Fix incorrect sequence numbering for unaggregated QoS Frame.Senthil Balasubramanian
This patch fixes an issue with the sequence numbers of unaggregated QoS frames, because of which the frames are handled in a different order at the AP and resulted in MLME REPLAYFAILURE. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12Fix rt2500usb HW crypto: TKIPIvo van Doorn
rt2500usb doesn't strip the IV/ICV data from received frames, so we don't need to set the RX_FLAG_IV_STRIPPED flag. We do need to set the RX_FLAG_MMIC_STRIPPED flag for all encryption types since the MMIC has been removed from the frame. After this patch TKIP Hardware crypto works for rt2500usb. WEP and AES are still failing. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rtl8180: Fix to add STA modeLarry Finger
To be compatible with mac80211 following "mac80211: only create default STA interface if supported", rtl8180 needs to set NL80211_IFTYPE_STATION in interface_modes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Piter PUNK <piterpunk@unitednerds.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12iwlwifi: Fix typo in iwl-commands.h for CCK rate bit range.Daniel Wu
My first (minor) patch, hopefully this is correct. Fix a typo in iwl-commands.h for CCK rates which needs 7 bits and not 4. Signed-off-by: Daniel Wu <dyqith@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix segementation faultIvo van Doorn
The queue_end() macro points to 1 position after the queue, which means that if we want to know if queue is at the end of the queue we should first increment the position and then check if it is a valid entry. This fixes a segmentation fault which only occurs when the device has enough endpoints to provide a dedicated endpoint for all TX queues (which likely won't happen for rt2500usb and rt73usb, but will happen for rt2800usb). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54usb: fix random traffic stalls (LM87)Christian Lamparter
All LM87 firmwares need a explicit termination "packet", in oder to finish the pending transfer properly. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54: crypto offload fixesChristian Lamparter
This patch fixes two small flaws: - restore the original TKIP IV if we altered it. - reserve & initialize ICV with zeros. This is actually only necessary for some obsolete p54usb firmwares. But we don't know yet, if all devices are compatible with the new revisions. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12orinoco_cs: add ID for ARtem Onair Comcard 11Pavel Roskin
Reported by Michael Jarosch <mitsch@riotmusic.de> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12iwlwifi: Fix get_cmd_string() for REPLY_3945_RXSamuel Ortiz
0x1b is a 3945 specific command, we should print it too when debugging. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Fix chainmask handling bugSujith
The chainmasks have to be updated before setting the channel, since the HW reset routine uses them to set the appropriate registers. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 14:41:49 +0000