summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2009-03-27ath5k: Support LED's on Acer Extensa 5620zTulio Magno Quites Machado Filho
Add vendor ID for Quanta Microsystems and update the led table with the reported device. Reported-by: Scott Barnes <nekoreeve@gmail.com> Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: update Makefile, Kconfig and MAINTAINERSChristian Lamparter
This patch update all necessary Makefile and Kconfig files. Now you can then enable ar9170 in the kernel configuration under: Device Drivers ---> [*] Network device support ---> Wireless LAN ---> [*] Wireless LAN (IEEE 802.11) <M> Atheros AR9170 support <M> Atheros AR9170 USB support Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: ar9170: USB frontend driverChristian Lamparter
USB frontend driver code for Atheros' AR9170 modules. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: mac/bbp and phy codeChristian Lamparter
MAC/BBP and PHY programming code Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: ar9170: mac80211 interaction codeChristian Lamparter
This patch contains almost all mac80211 interaction code of AR9170. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ar9170: hardware and eeprom header filesChristian Lamparter
hardware / firmware interface definitions for Atheros' AR9170 based devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211_hwsim: let the reg workqueue breathe when regtest is setLuis R. Rodriguez
Without this the regulatory domain isn't seen and we end up intersecting for each request (each radio). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27Add mesh point functionality to ath9kPat Erley
This patch enables mesh point operation for ath9k. Tested with b43, ath9k, rt2500usb, and ath5k as peers. Signed-off-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27p54: fix SoftLED compile dependenciesChristian Lamparter
This patch fixes a compile problem when the MAC80211_LEDS triggers are enabled but not LED class itself. (which is sort of pointless, but anyway...) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Nuke struct ath_xmit_statusVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in reporting status of tx rateVasanthakumar Thiagarajan
This patch updates count of every hw tried rate with appropriate tries before reporting tx status of a frame. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27b43: Mask PHY TX error interrupt, if not debuggingMichael Buesch
This masks the PHY TX error interrupt, if debugging is disabled. Currently we have a bug somewhere which triggers this interrupt once in a while. (Depends on the network noise/quality). While this is nonfatal, it scares the hell out of users and we frequently receive bugreports that incorrectly identify this error message as the reason. There's another problem with this. The PHY TX error interrupt is protected with a watchdog that will restart the device if it keeps triggering very often. This is used to fix interrupt storms from completely broken devices. However, this watchdog might trigger in completely normal operation. If the TX capacity of the card is saturated, the likeliness of the watchdog triggering increases, as more TX errors occur. The current threshold for the watchdog is 1000 errors in 15 seconds. This patch adds a workaround for the issue by just enabling the interrupt if debugging is disabled (by Kconfig or by modparam). This has the downside that real fatal PHY TX errors are not caught anymore. But this is nonfatal due to the following reasons: * If the card is not able to transmit anymore, MLME will notice anyway. * I did _never_ see a real fatal PHY TX error in a mainline b43 driver. * It does _not_ result in interrupt storms or something like that. It will simply result in a stalled card. It can be debugged by enabling the debugging module parameter. Signed-off-by: Michael Buesch <mb@bu3sch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless/p54: P54_SPI should depend on GENERIC_HARDIRQSGeert Uytterhoeven
m68k allmodconfig: | drivers/net/wireless/p54/p54spi.c: In function 'p54spi_probe': | drivers/net/wireless/p54/p54spi.c:675: error: implicit declaration of function | 'set_irq_type' | make[4]: *** [drivers/net/wireless/p54/p54spi.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix rate control update for aggregated framesVasanthakumar Thiagarajan
We will miss rate control update if first A-MPDU of an aggregation is not Block Acked as we always tell if the rate control needs to updated through update_rc of first A-MPDU. This patch does rate control update for the first A-MPDU which notifies it's tx status (which is not necessarily the first A-MPDU of an aggregation) to mac80211. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: replace stations with stations_39Abhijeet Kolekar
A *leftover* stations is replaced with stations_39. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlwifi: report error when detect failure during stop agg queueWey-Yi Guy
This fix related to bug 1921 at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1921 when detect error during stopping tx aggregation queue, report the error to help identify the problem. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: control rate decreaseAbhijeet Kolekar
Control the rate decrease. Do not decrease the rate fast. Use success_ratio for rate scaling :) Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: fix checkpatch.pl errorsAbhijeet Kolekar
Patch fixes two checkpatch.pl errors. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: use iwl_cmd_queue_freeAbhijeet Kolekar
iwl_cmd_queue_free needs to be used to free up the cmd_queue, as TFD slots for cmd_queue and tx_queue are different. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: set TFD_QUEUE_MAX to correct valueAbhijeet Kolekar
Total number of queues is 8 but only 7 of them are TX queues. 4 AC(Data) queue ,1 CMD and 2 HCCA. The HCCA queues are not used. max_txq_num is set to maximum usable TX queues. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlwifi: support 11hMohamed Abbas
Set IEEE80211_HW_SPECTRUM_MGMT bit in hw->flags, this tell mac80211 we support spectrum mgmt. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlcore: dont commit power command if interface is not upMohamed Abbas
If user set new power level, accept the new power level and only send command to host if the interface is up and radio on. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlagn: allow power level setting all the timesMohamed Abbas
allow user to set power level at all times Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlwifi: return 0 for AMPDU_TX/RX_STOP request if NIC is going downWey-Yi Guy
When receive IEEE80211_AMPDU_RX_STOP or IEEE80211_AMPDU_TX_STOP request in iwl_mac_ampdu_action() from mac80211; check STATUS_EXIT_PENDING bit, if NIC is on the way out, then return 0 back to mac80211, this can prevent mac80211 report HW error incorrectly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwl3945: use changed in iwl3945_mac_configMohamed Abbas
In function iwl3945_mac_config use changed flag to call only the affected functions. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27iwlagn: use changed in mac_configMohamed Abbas
In function iwl_mac_config use changed flag to call only the affected functions. This patch also allow user to cache channel, txpower and power value when the interface is not ready and apply the changes once the interface ready. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Add tx power calibration supportNick Kossifidis
* Add tx power calibration support * Add a few tx power limits * Hardcode default power to 12.5dB * Disable TPC for now v2: Address Jiri's comments Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: remove dummy PCI "retry timeout" fixBob Copeland
Remove the PCI retry timeout code, for all the same reasons that Luis Rodriguez removed it for ath9k. Changes-licensed-under: 3-Clause-BSD Cc: Luis Rodriguez <lrodriguez@atheros.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: disable MIB interruptsBob Copeland
The MIB interrupt fires whenever counters overflow; however without support for automatic noise immunity, we can sometimes get an interrupt storm. The get_stats() callback reads the counters anyway so we can disable the interrupt for now until ANI is implemented. This fixes the issue reported in http://bugzilla.kernel.org/show_bug.cgi?id=12647. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Convert chip specific calibration data to a generic formatNick Kossifidis
* Convert chip specific calibration data to a generic format common for all chips Note: We scale up power to be in 0.25dB units for all chips for compatibility with RF5112 v2: Address Bob's and Jiri's comments Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Choose the right initvals for RF2425Nick Kossifidis
* Fix a typo in initvals.c so that we use the RF2425 array for RF2425 and not RF2413 Note: This also fixes incorect pd gain overlap since RF2425 has different pd gain overlap from RF2413 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Keep LED on in idle state after associationVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless: radiotap updatesJohannes Berg
Radiotap was updated to include a "bad PLCP" flag and standardise the "bad FCS" flag in the "flags" rather than "RX flags" field, this patch updates Linux to that standard. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Update copyright in all the filesSujith
How time flies. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in handling single stream stationsSujith
AP mode currently sets up the dual stream capability for all stations. This patch fixes it by checking if the associated station supports dual stream MCS rates (8-15). We would disregard any MCS rates above 15, since Atheros HW supports only 0..15 rates currently, and can't receive at rates > 15 anyway. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fill in ack signal in TX statusSujith
This patch fills the ack_signal field in TX status with an appropriate value from the TX descriptor. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in 4K EEPROM size calculationSujith
We should be checking with the 4K header and not the non-4K header size. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Change return type for set_board_values()Sujith
We always return true, checking for 'false' return value is bogus anyway, so fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Introduce a helper function for setting board gain valuesSujith
This improves readability. Handle both 4K/non-4K EEPROM in this patch. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Move AR5416_VER_MASK to a common locationSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Miscellaneous EEPROM handling cleanupSujith
Print the EEPROM version/revision on init. Choose appropriate debug masks on error conditions, and remove useless print messages. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: remove dummy PCI "retry timeout" fixLuis R. Rodriguez
Remove the PCI retry timeout code as that was just taken from ipw2100 due to historical reasons but in reality its a no-op, additionally its simply incorrect as each PCI devices has its own custom PCI configuration space on PCI config space >= 0x40. Not to mention we were trying to write 0 to a place that already has 0 on it. Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ben Cahill <ben.m.cahill@intel.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Tested-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Add support for multiple virtual AP interfacesJouni Malinen
This patch fixes the TSF offset calculation for staggered Beacon frames and sets ATH_BCBUF back to the earlier value 4 to enable multi-BSS configurations of up to four BSSes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Set IEEE80211_TX_CTL_RATE_CTRL_PROBE in rate control for probe rateVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless: convert wavelan to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27wireless: convert arlan to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25rndis_wlan: Fix build with netdev_ops compat disabled.David S. Miller
Instead of storing a private ->set_multicast_list, just have a private netdev ops. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21hostap: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21hostap: convert to internal net_device_statsStephen Hemminger
Use pre-existing net_device_stats in network_device struct. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21ipw2200: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 08:06:47 +0000