summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2015-01-27ath9k and ath9k_htc: rename variable "led_blink"Hong Xu
ath9k and ath9k_htc use the variable name "led_blink" to indicate whether the module parameter "blink" is on. This name is easy to conflict with other variables, and has caused a compiler error found by kbuild test bot. The compiler error is as following: drivers/net/wireless/ath/ath9k/ath9k_htc.o:(.data+0x47c): multiple definition of `led_blink' drivers/net/wireless/ath/ath9k/ath9k.o:(.bss+0x20): first defined here Fixes: 3a939a671225 ("ath9k_htc: Add a module parameter to disable blink") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtl8192cu: fix the mesh beaconingChun-Yeow Yeoh
Patch "rtlwifi: add support to send beacon frame" allows the beaconing of rtl8192cu. But mesh beaconing is not working. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtlwifi: add support to send beacon frame.Taehee Yoo
In AP mode, beacon frame is necessary to keep connection. this patch adds a sending beacon frame routine in initialization routine. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: set netif carrier off in ndo_openJohannes Berg
This patch adds fix to set carrier state off during ndo_open. Carrier should be set to ON when device is ready to send data. In case of station/adhoc interface device is able to transfer data after successful association/join operation. For AP this would be after bss_active event. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27ath10k: fix pmf for wmi-tlv on qca6174Marek Kwaczynski
New wmi-tlv firmware uses HTT 3.0 protocol which uses TX_FRM command for management frames (instead of a dedicated command). To support PMF it is necessary to provide explicit tailroom. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: remove sw encryption for pmfMarek Kwaczynski
Software encryption was never necessary. Tested with fw 636 and fw 10.x. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: disable irqs after fw crashMichal Kazior
It makes little sense to keep handling irqs if fw is dead. This prevents multiple fw register dumps upon crash on some devices (seen on QCA6174). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: disable uapsd autotriggerMichal Kazior
Only userspace can make an educated decision when a trigger frame is required so make sure the autotrigger service is disabled. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: implement uapsd autotrigger commandJanusz Dziedzic
New wmi-tlv firmware for qca6174 has u-UAPSD autotrigger service. If it is enabled firmware generates trigger frames automatically as configured. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: fix nullfunc workaroundMichal Kazior
The workaround couldn't work correctly because the 802.11 header wasn't properly stripped of QoS Data bit so it wasn't recognized in the later parts of tx path as NullFunc frame and ended up in HTT Tx instead of HTT Mgmt Tx. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: fix dtim period with beacon templatesMichal Kazior
Firmware supporting beacon templates (i.e. wmi-tlv for qca6174) doesn't implicitly take dtim period from the template. Instead it requires vdev param to be set accordingly. This fixes dtim period being stuck at 3. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: use idr api for msdu_idsMichal Kazior
HTT Tx protocol uses arbitrary host assigned ids too associate with MSDUs when delivering completions. Instead of rolling out own id generation scheme use the tools provided in kernel. This should have little to no effect on performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: fix 10.2 fw stats parsingMichal Kazior
Both 10.2 firmware binaries 10.2-00082-4 and 10.2.4.20 have introduced ABI changes to fw_stats each. This caused fw_stats to output wrong data. Define new structures and use them to parse the statistics correctly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: split fw pdev stats parsingMichal Kazior
This will make it easier to implement fw stats parsing for firmware 10.2. This also renames a few structures for consistency. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: add support for qca6174Michal Kazior
The QCA6174 in combination with new wmi-tlv firmware is capable of multi-channel, beamforming, tdls and other features. This patch just makes it possible to boot these devices and do some basic stuff like connect to an AP without encryption. Some things may not work or may be unreliable. New features will be implemented later. This will be addressed eventually with future patches. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: add support for qca6174 Rx descriptorsMichal Kazior
The QCA6174 chip has an extra 4 bytes in rx_ppdu_end structure which is used in htt_rx_desc and HTT Rx ring offset setup. This is necessary for correct Rx for QCA6174 (otherwise Rx descriptors are overwritten and corrupted). This means QCA988X will have an extra 4 byte padding in Rx descriptor layout which is harmless. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: reset chip before reading chip_id in probeMichal Kazior
There are some very rare cases with some hardware configuration that the device doesn't init quickly enough in which case reading chip_id yielded 0. This caused driver to subsequently fail to setup the device. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: implement rx reorder supportMichal Kazior
New firmware and firmware (qca6174 hw3.0+ and fw 266+) are capable of full aggregation rx reordering. If it's enabled then Rx is handled via a new, separate htt event. The rx ring behaviour is changed a little to support the new rx scheme. These changes shouldn't affect qca988x performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: introduce struct ath10k_skb_rxcbMichal Kazior
It doesn't make much sense to share the ath10k_skb_cb with Rx path. The Rx path doesn't need to keep any mac80211's data. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: implement diag eventMichal Kazior
Some firmware revisions may report this event as part of their diagnostics. This avoids `unknown event` warnings and adds tracing for the event. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: implement diag data container eventMichal Kazior
Some firmware revisions may report this event as part of their diagnostics. This avoids `unknown event` warnings and adds tracing for the event. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-27ath10k: use IEEE80211_HW_SW_CRYPTO_CONTROLJohannes Berg
The ath10k driver only supports HW crypto (except for management frames or so - CMAC needs to be done in software). Make it use the new IEEE80211_HW_SW_CRYPTO_CONTROL flag to ensure mac80211 doesn't erroneously attempt to use software crypto. Taking through my tree after Kalle's ACK to avoid breaking the ath10k driver with the next crypto patches. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2015-01-22 now a bigger pull request for net-next. Rafal found a UTF-8 bug in patchwork[1] and because of that two commits (d0c102f70aec and d0f66df5392a) have his name corrupted: Acked-by: Rafa? Mi?ecki <zajec5@gmail.com> Somehow I failed to spot that when I commited the patches. As rebasing public git trees is bad, I thought we can live with these and decided not to rebase. But I'll pay close attention to this in the future to make sure that it won't happen again. Also we requested an update to patchwork.kernel.org, the latest patchwork doesn't seem to have this bug. Also please note this pull request also adds one DT binding doc, but this was reviewed in the device tree list: .../bindings/net/wireless/qcom,ath10k.txt | 30 + Please let me know if you have any issues. [1] https://lists.ozlabs.org/pipermail/patchwork/2015-January/001261.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25iwlwifi: mvm: check IWL_UCODE_TLV_API_SCD_CFG in API and not in capaEmmanuel Grumbach
IWL_UCODE_TLV_API_SCD_CFG is a new API and hence, check if enabled in the correct field. Fixes: 0294d9eece86 ("iwlwifi: mvm: let the firmware configure the scheduler") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-23atmel: Remove open-coded and wrong strcasecmpRasmus Villemoes
The kernel's string library does in fact have strcasecmp, at least since ded220bd8f08 ("[STRING]: Move strcasecmp/strncasecmp to lib/string.c"). Moreover, this open-coded version is in fact wrong: If the strings only differ in their last character, a and b have already been incremented to point to the terminating NUL bytes, so they would wrongly be treated as equal. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54pci: add handling of signal caseNicholas Mc Guire
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54: add handling of the signal caseNicholas Mc Guire
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath5k: document a fall-through case in ath5k_hw_set_opmodeJohn Linville
Coverity: CID 114932 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cbJohn Linville
This clause is conditioned on htc_hdr != NULL, but it will only be NULL when that check is reached. Coverity: CID 114318 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23brcmfmac: Use put_unaligned_le32Vaishali Thakkar
This patch introduces the use of function put_unaligned_le32. This is done using Coccinelle and semantic patch used is as follows: @a@ typedef u32, __le32, uint32_t; {u32,__le32,uint32_t} e32; identifier tmp; expression ptr; expression y,e; type T; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp ( - memcpy(ptr, (T)&tmp, \(4\|sizeof(u32)\|sizeof(__le32)\|sizeof(uint32_t)\|sizeof(e32)\)); + put_unaligned_le32(y,ptr); | - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ) ...+> ? tmp = e @@ type T; identifier a.tmp; @@ - T tmp; ...when != tmp Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23b43: stop leds during suspendSabrina Dubroca
Call b43_leds_stop during suspend to avoid this WARN: WARNING: CPU: 1 PID: 0 at net/mac80211/util.c:755 ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211]() queueing ieee80211 work while going to suspend [...] Call Trace: [<c165fb2a>] dump_stack+0x48/0x69 [<c1052f7b>] warn_slowpath_common+0x8b/0xc0 [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<c1052fe3>] warn_slowpath_fmt+0x33/0x40 [<f9c30225>] ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30260>] ieee80211_queue_work+0x20/0x40 [mac80211] [<f9f25d78>] b43_led_brightness_set+0x28/0x30 [b43] [<c14f3835>] led_timer_function+0xd5/0xe0 [<c10cb534>] call_timer_fn+0xa4/0x4a0 Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: unlock on error in wl1271_op_suspend()Dan Carpenter
We recently introduced a new error path which needs an unlock. Fixes: 6d5a748d4836 ('wlcore: add ability to reduce FW interrupts during suspend') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23rtlwifi/rtl8192de: remove redundant else if checkColin Ian King
The else if check condition checks for the opposite of the if check, hence the else if check is redundant and can be replaced with a simple else: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { .. } replaced with: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else { .. } Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: Add a module parameter to disable blinkHong Xu
Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes. Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initiate TX BA sessionsBob Copeland
Currently, wcn36xx only asks for a TX BA session if it has already established one for RX. Thus, two wcn36xx devices cannot do a-mpdu between themselves since they both wait for the other to go first. Fix this by starting a BA session after a few QoS data frames have been sent to a STA. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: move set_tx_pdu inside set_tx_data/mgmtBob Copeland
The pdu is part of the buffer descriptor, so it makes sense that one function would fill both. Also, passing the whole skb instead of just the header pointer to the set_tx_data function paves the way for using its fields for ampdu setup inside set_tx_data(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize dxe lockBob Copeland
The dxe lock is missing its initialization, so add it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize skb_lockBob Copeland
ctl->skb_lock is never initialized, a fact caught by lockdep. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: don't process 'valid' descriptorsBob Copeland
The DMA engine will reset the valid bit after a descriptor is complete; any with the valid bit still set may still be in use by the hardware, so check that before freeing the descriptor. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: let device generate qos seq numbersBob Copeland
wcn36xx currently sends an incorrect sequence number into the BA session setup firmware command: it should be saving or updating the ssn in the TX_START ampdu_action callback instead of waiting until TX_OPERATIONAL. However, we can sidestep the issue by letting the hardware generate the sequence numbers for QoS frames, as is done in prima, so do that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: use !! when assigning int as a booleanBob Copeland
bd->tx_comp is a single bit in a bitfield, so assigning "info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS" only happens to work because TX_STATUS is defined to BIT(0); if it were any other bit this assignment would fail. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize device defaults on startBob Copeland
Set up default configuration for the device when we call start. The defaults come from dumps from the prima driver for the same hardware. This fixes transmit A-MPDU; previously only one MPDU would be sent per A-MPDU due to missing MAX_MPDUS_IN_AMPDU setting. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: fix copy-paste bug: assign from src struct not destGiel van Schijndel
Signed-off-by: Giel van Schijndel <me@mortis.eu> Reported-at: http://www.viva64.com/en/b/0299/ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: do not emit messages while holding spinlockAvinash Patil
Avoid printing dev_{warn/dbg} messages while holding spinlock. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: check driver status in connect and scan handlersAmitkumar Karwar
Ignore scan and connection requests from cfg80211 when driver unload is in process or previous command has timed out due to a firmware bug. This patch fixes corner case system crash issues. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k: Fix no-ack frame statusSujith Manoharan
Check if the frame has been completed without any error and use IEEE80211_TX_STAT_NOACK_TRANSMITTED to indicate successful transmission of no-ack frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23Merge tag 'iwlwifi-next-for-kalle-2015-01-22' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * more work for new devices (4165 / 8260) * cleanups / improvemnts in rate control * fixes for TDLS * major statistics work from Johannes - more to come * improvements for the fw error dump infrastructure * usual amount of small fixes here and there (scan, D0i3 etc...)
2015-01-22iwlwifi: mvm: fix rx chains configuration in phy ctxt cmdLiad Kaufman
In the PHY_CTXT command sent to the FW the TX chains were indeed configured by the values of both FW TLVs and of NVM, but the RX chains were left out and configured only by FW TLV. This causes problems in 4165 HW, where there are 1x1 antennas, and the wrong configuration denies the driver from connecting to the AP. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: pcie: support secured boot flow for family 8000 B stepEran Harary
The driver loads the 2 CPU sections, then it needs to let the firmware know to start the authentication of the sections. This is done by writing the relevants bits to FH_UCODE_LOAD_STATUS. For CPU1, the driver sets the lower 16 bits. For both CPUs, the driver sets all the 32 bits. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: remove stats argument from functionsJohannes Berg
The stats argument is always only passed as &mvm->drv_rx_stats, so there's no point in passing it when the mvm pointer is passed. Remove the argument entirely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 03:40:27 +0000