summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-12-29Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (42 commits) r8169: extraneous Cmd{Tx/Rx}Enb write forcedeth: modified comment header NetXen: Reducing ring sizes for IOMMU issue. NetXen: Fix for PPC machines. NetXen: work queue fixes. NetXen: Link status message correction for quad port cards. NetXen: Multiple adapter fix. NetXen: Using correct CHECKSUM flag. NetXen: driver reload fix for newer firmware. NetXen: Adding new device ids. PHY probe not working properly for ibm_emac (PPC4xx) ep93xx: some minor cleanups to the ep93xx eth driver sky2: phy power down needs PCI config write enabled sky2: power management/MSI workaround sky2: dual port NAPI problem via-velocity uses INET interfaces e1000: Do not truncate TSO TCP header with 82544 workaround myri10ge: handle failures in suspend and resume myri10ge: no need to save MSI and PCIe state in the driver myri10ge: make msi configurable at runtime through sysfs ...
2006-12-26r8169: extraneous Cmd{Tx/Rx}Enb writeFrancois Romieu
Checked in Realtek's driver, this one has no business being there. The driver still works but there is a noticeable performance drop. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-12-26forcedeth: modified comment headerAyaz Abdulla
This patch removes comment that forcedeth is not supported by NVIDIA. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Reducing ring sizes for IOMMU issue.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Fix for PPC machines.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 2 +- netxen_nic_init.c | 12 ++++++------ netxen_nic_main.c | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: work queue fixes.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 3 +-- netxen_nic_init.c | 2 +- netxen_nic_main.c | 15 +++++++-------- 3 files changed, 9 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Link status message correction for quad port cards.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_isr.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Multiple adapter fix.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 3 +-- netxen_nic_main.c | 12 ------------ 2 files changed, 1 insertion(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Using correct CHECKSUM flag.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_hw.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: driver reload fix for newer firmware.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_main.c | 7 +++++++ 1 files changed, 7 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26NetXen: Adding new device ids.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_main.c | 2 ++ 1 files changed, 2 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26PHY probe not working properly for ibm_emac (PPC4xx)Hynek Petrak
I have a system with AMCC PowerPC 405EP and PHY Intel LXT971A. Linux 2.6.18.3 is not able to detect the PHY ID correctly. The PHY ID detected is 0, but should be 0x1d. This is because phy_read() (__emac_mdio_read() resp.) from drivers/net/ibm_emac/ibm_emac_core.c might return -ETIMEDOUT or -EREMOTEIO on error. This is ignored inside the int mii_phy_probe(struct mii_phy *phy, int address) from drivers/net/ibm_emac/ibm_emac_phy.c as the return value is assigned to an u32 variable. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26ep93xx: some minor cleanups to the ep93xx eth driverYan Burman
Small cleanup in the Cirrus Logic EP93xx ethernet driver: Check for NULL pointer before dereferencing it instead of after. Remove unreferenced variable. Signed-off-by: Yan Burman <burman.yan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-12-26sky2: phy power down needs PCI config write enabledStephen Hemminger
In order to change PCI registers (via the iomap'd window), it needs to be enabled; this wasn't being done in sky2_phy_power the function that turns on/off power to the PHY. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26sky2: power management/MSI workaroundStephen Hemminger
MSI doesn't work properly on resume on many platforms because the BIOS goes and changes it back to INTx mode after the sky2 driver has restored in resume. It is really a bug in the base power management resume code, and this workaround is temporary until the change to PM code works it's way through the release process. The PM fix is non-trivial since it needs to change when non-boot CPU's are enabled. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26sky2: dual port NAPI problemStephen Hemminger
Shutting down port 0 disables the NAPI poll used by both ports. The long term fix will be to separate NAPI object from net device until then just reenable if needed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26via-velocity uses INET interfacesRandy Dunlap
via-velocity doesn't build when CONFIG_INET=n: drivers/built-in.o: In function `velocity_unregister_notifier': via-velocity.c:(.text+0xe9b46): undefined reference to `unregister_inetaddr_notifier' drivers/built-in.o: In function `velocity_init_module': via-velocity.c:(.init.text+0xa027): undefined reference to `register_inetaddr_notifier' I wanted to make this change in drivers/net/Kconfig, but this isn't legal kconfig language: config VIA_VELOCITY tristate "VIA Velocity support" depends on NET_PCI && PCI + depends on INET if PM select CRC32 select CRC_CCITT select MII so fix it in via-velocity.c instead. Builds with all 4 combinations of CONFIG_NET & CONFIG_PM. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: Do not truncate TSO TCP header with 82544 workaroundHerbert Xu
The e1000 driver has a workaround for 82544 on PCI-X where if the terminating byte of a buffer is at addresses 0-3 mod 8, then 4 bytes are shaved off it and defered to a new segment. This is due to an erratum that could otherwise cause TX hangs. Unfortunately this breaks TSO because it may cause the TCP header to be split over two segments which itself causes TX hangs. The solution is to pull 4 bytes of data up from the next segment rather than pushing 4 bytes off. This ensures the TCP header remains in one piece and works around the PCI-X hang. This patch is based on one from Jesse Brandeburg. This bug has been trigered by both CONFIG_DEBUG_SLAB as well as Xen. Note that the only reason we don't see this normally is because the TCP stack starts writing from the end, i.e., it writes the TCP header first then slaps on the IP header, etc. So the end of the TCP header (skb->tail - 1 here) is always aligned correctly. Had we made the start of the IP header (e.g., IPv6) 8-byte aligned instead, this would happen for normal TCP traffic as well. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> -- Visit Openswan at http://www.openswan.org/ Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26myri10ge: handle failures in suspend and resumeBrice Goglin
On suspend, handle pci_set_power_state errors, and on resume handle failures in pci_resume_state(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26myri10ge: no need to save MSI and PCIe state in the driverBrice Goglin
The PCI MSI and express state are already saved and restored by the current versions of pci_save_state/pci_restore_state. Therefore it is no longer necessary for the driver to do it. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26myri10ge: make msi configurable at runtime through sysfsBrice Goglin
Now that IRQ are requested is called on open() and freed on close(), we can safely switch from/to MSI without unloading the module. We are guaranteed to correctly free IRQ even if the sysfs file got written in the meantime since the MSI initialization is stored in mgp->msi_enabled. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26myri10ge: move request_irq to myri10ge_openBrice Goglin
Request IRQ in myri10ge_open() and free in close() instead of probe() and remove() to eliminate potential race between the watchdog and the interrupt handler. Additionaly, the interrupt handler won't get called on shared irq anymore when the interface is down. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26myri10ge: match number of save_state and restoreBrice Goglin
Since pci_save_state() pushes MSI and PCIe states on a kind of stack, myri10ge saving the state in advance for parity recovery will push the state again on the stack on suspend. This leads to some memory leak. We add a couple additional calls to save_state and restore_state so that we don't leak anymore. For the future, we are thinking of a better way to recover from parity error without using pci_save_state(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26r8169: use the broken_parity_status field in pci_devFrancois Romieu
The former option is removed and platform code can now specify the expected behavior. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26netpoll: drivers must not enable IRQ unconditionally in their NAPI handlerFrancois Romieu
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of a driver which supports netpoll. b57bd06655a028aba7b92e1c19c2093e7fcfb341 fixed the issue for the 8139too.c driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26netxen: remove private ioctlStephen Hemminger
The netxen driver includes a private ioctl that provides access to functionality that is already available in other ways. The PCI layer has application access hooks (see setpci), and the statistics are available in ethtool/netstats. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: No-delay link detection at interface upJesse Brandeburg
Currently after an interface up, the link state is detected 2 seconds later when the first watchdog timer runs. This patch changes that by triggering the hardware to generate a link-change interrupt from the up() function instead. This has the result that the link state gets detected immediately and without races. This has the potential to speed up booting since a normal distribution boot process waits for a link before DHCP is attempted. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: 3 new driver stats for managability testingJeff Garzik
Add 3 extra packet redirect counters for tracking purposes to make sure we can test that all packets arrive properly. Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten to use feature flags by me. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: Make the copybreak value a module parameterJesse Brandeburg
Allow the user to vary the size that copybreak works. Currently cb is enabled for packets < 256 bytes, but various tests indicate that this should be configurable for specific use cases. In addition, this parameter allows us to force never/always during testing to get full and predictable coverage of both code paths. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: Fix PBA allocation calculationsBruce Allan
Assign the PBA to be large enough to contain at least 2 jumbo frames on all adapters. This dramatically increases performance on several adapters and fixes TX performance degradation issues where the PBA was misallocated in the old algorithm. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: narrow down the scope of the tipg timer tweakJesse Brandeburg
the driver has (ancient) code for messing with TIPG from the 82542 days. Unfortunately this code was running on our current adapters and setting TIPG for fiber to be +1 over the copper value. This caused 1.45Mpps to be sent instead of 1.487Mpps. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: fix ethtool reported bus type for older adaptersJeff Kirsher
For older adapters we know that they are of the PCI bus type, so we can just set this. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: fix to set the new max frame size before resetting the adapterBruce Allan
This bugfix makes sure that the driver data reflects the full new situation before the adapter is reinitialized. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: workaround for the ESB2 NIC RX unit issueJeff Garzik
In rare occasions, ESB2 systems would end up started without the RX unit being turned on. Add a check that runs post-init to work around this issue. Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten to use feature flags by me. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: disable TSO on the 82544 with slab debuggingJesse Brandeburg
CONFIG_DEBUG_SLAB changes alignments of the data structures the slab allocators return. These break certain workarounds for TSO on the 82544. Since DEBUG_SLAB is relatively rare and not used for performance sensitive cases, the simplest fix is to disable TSO in this special situation. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: Fix Wake-on-Lan with forced gigabit speedJesse Brandeburg
If the user has forced gigabit speed, phy power management must be disabled; otherwise the NIC would try to negotiate to a linkspeed of 10/100 mbit on shutdown, which would lead to a total loss of link. This loss of link breaks Wake-on-Lan and IPMI. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: consolidate managability enabling/disablingJeff Garzik
Several bugs existed in how we handle manageability issues all over the driver. This patch consolidates all the managability release and init code in two single functions and call them from appropriate locations. This fixes several BMC packet redirect issues and powerup/down hiccups. Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten to use feature flags by me. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: omit stats for broken counter in 82543Jeff Garzik
The 82543 chip does not count tx_carrier_errors properly in FD mode; report zeros instead of garbage. Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten to use feature flags by me. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26e1000: For sanity, reformat e1000_set_mac_type(), struct e1000_hw[_stats]Jeff Garzik
Makes future changes a bit more readable. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: dynamic itr: take TSO and jumbo into accountJesse Brandeburg
The dynamic interrupt rate control patches omitted proper counting for jumbo's and TSO resulting in suboptimal interrupt mitigation strategies. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26[PATCH] e1000: The user-supplied itr setting needs the lower 2 bits masked offJesse Brandeburg
The lower 2 bits of a user-supplied itr setting (via ethtool) need to be masked off: These lower two bits are used as control bits. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-22[PATCH] smc911 workqueue fixesAndrew Morton
Teach this driver about the workqueue changes. Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22[PATCH] smc911x: fix netpoll compilation faliureVitaly Wool
Fix the compilation failure for smc911x.c when NET_POLL_CONTROLLER is set. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-20Merge branch 'merge' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix register save area alignment for swapcontext syscall [POWERPC] Fix PCI device channel state initialization [POWERPC] Update MTD OF documentation [POWERPC] Probe Efika platform before CHRP. [POWERPC] Fix build of cell zImage.initrd [POWERPC] iSeries: fix CONFIG_VIOPATH dependency [POWERPC] iSeries: fix viocons init [POWERPC] iSeries: fix viocd init [POWERPC] iSeries: fix iseries_veth init [POWERPC] iSeries: fix viotape init [POWERPC] iSeries: fix viodasd init [POWERPC] Workaround oldworld OF bug with IRQs & P2P bridges [POWERPC] powerpc: add scanning of ebc bus to of_platform [POWERPC] spufs: fix assignment of node numbers [POWERPC] cell: Fix spufs with "new style" device-tree [POWERPC] cell: Enable spider workarounds on all PCI buses [POWERPC] cell: add forward struct declarations to spu.h [POWERPC] cell: update cell_defconfig
2006-12-20[POWERPC] iSeries: fix iseries_veth initStephen Rothwell
Only initialise iseries_veth on legacy iSeries. Make the init and exit routines static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-19[PATCH] zd1211rw: Call ieee80211_rx in taskletUlrich Kunitz
The driver called ieee80211_rx in hardware interrupt context. This has been against the intention of the ieee80211_rx function. It caused a bug in the crypto routines used by WPA. This patch calls ieee80211_rx in a tasklet. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-17[TG3]: Update version and reldate.Michael Chan
Update version to 3.71. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Power down/up 5906 PHY correctly.Michael Chan
The 5906 PHY requires a special register bit to power down and up the PHY. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Fix race condition when calling register_netdev().Michael Chan
Hot-plug scripts can call tg3_open() as soon as register_netdev() is called in tg3_init_one(). We need to call pci_set_drvdata() before register_netdev(), and netif_carrier_off() needs to be moved to tg3_open() to avoid race conditions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 22:03:35 +0000