summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: bnx2: Fix the behavior of ethtool when ONBOOT=no qla3xxx: Don't sleep while holding lock. qla3xxx: Give the PHY time to come out of reset. ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off net: Move rx skb_orphan call to where needed ipv6: Use correct data types for ICMPv6 type and code net: let KS8842 driver depend on HAS_IOMEM can: let SJA1000 driver depend on HAS_IOMEM netxen: fix firmware init handshake netxen: fix build with without CONFIG_PM netfilter: xt_rateest: fix comparison with self netfilter: xt_quota: fix incomplete initialization netfilter: nf_log: fix direct userspace memory access in proc handler netfilter: fix some sparse endianess warnings netfilter: nf_conntrack: fix conntrack lookup race netfilter: nf_conntrack: fix confirmation race condition netfilter: nf_conntrack: death_by_timeout() fix
2009-06-24bnx2: Fix the behavior of ethtool when ONBOOT=noOoiwa Naohiro
I found a little bug. When configure in ifcfg-eth* is ONBOOT=no, the behavior of ethtool command is wrong. # grep ONBOOT /etc/sysconfig/network-scripts/ifcfg-eth2 ONBOOT=no # ethtool eth2 | tail -n1 Link detected: yes I think "Link detected" should be "no". Signed-off-by: Ooiwa Naohiro <nooiwa@miraclelinux.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23qla3xxx: Don't sleep while holding lock.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23qla3xxx: Give the PHY time to come out of reset.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Add __init/__exit macros to addr.c and cma.c IB/ehca: Bump version number mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() calls IB/mthca: Replace dma_sync_single() use with proper functions RDMA/nes: Fix FIN state handling under error conditions RDMA/nes: Fix max_qp_init_rd_atom returned from query device IB/ehca: Ensure that guid_entry index is not negative IB/ehca: Tolerate dynamic memory operations before driver load
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (38 commits) fusion: mptsas, fix lock imbalance [SCSI] scsi_transport_fc: replace BUS_ID_SIZE by fixed count sd, sr: fix Driver 'sd' needs updating message scsi_transport_iscsi: return -EOVERFLOW for Too many iscsi targets fc_transport: Selective return value from BSG timeout function fc_transport: The softirq_done function registration for BSG request sym53c8xx: ratelimit parity errors explain the hidden scsi_wait_scan Kconfig variable ibmvfc: Fix endless PRLI loop in discovery ibmvfc: Process async events before command responses libfc: Add runtime debugging with debug_logging module parameter libfcoe: Add runtime debugging with module param debug_logging fcoe: Add runtime debug logging with module parameter debug_logging scsi_debug: Add support for physical block exponent and alignment cnic: add NETDEV_1000 and NETDEVICES to Kconfig select cnic: Fix __symbol_get() build error. Revert "[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’" ipr: differentiate pci-x and pci-e based adapters ipr: add test for MSI interrupt support scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfers ...
2009-06-23net: let KS8842 driver depend on HAS_IOMEMHeiko Carstens
Fixes this compile error on s390: CC drivers/net/ks8842.o drivers/net/ks8842.c: In function 'ks8842_select_bank': drivers/net/ks8842.c:124: error: implicit declaration of function 'iowrite16' drivers/net/ks8842.c: In function 'ks8842_write8': drivers/net/ks8842.c:131: error: implicit declaration of function 'iowrite8' Cc: Richard Rojfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23can: let SJA1000 driver depend on HAS_IOMEMHeiko Carstens
Fixes this compile error on s390: drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_read_reg': drivers/net/can/sja1000/sja1000_platform.c:42: error: implicit declaration of function 'ioread8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_write_reg': drivers/net/can/sja1000/sja1000_platform.c:47: error: implicit declaration of function 'iowrite8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_probe': drivers/net/can/sja1000/sja1000_platform.c:79: error: implicit declaration of function 'ioremap_nocache' Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23netxen: fix firmware init handshakeDhananjay Phadke
Make sure all functions run firmware init handshake. If PCI function 0 fails to initialize firmware, mark the state failed so that other functions on the same board bail out quickly instead of waiting 30s for firmware handshake. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23netxen: fix build with without CONFIG_PMDhananjay Phadke
wrap pci suspend() and resume() with CONFIG_PM check. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() callsRoland Dreier
Commit 5d23a1d2 ("net: replace dma_sync_single with dma_sync_single_for_cpu") replaced uses of the deprectated function dma_sync_single() with calls to dma_sync_single_for_cpu(). However, to be correct, the code should do a sync for_cpu() before touching the memory and for_device() after it's done. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: enable m41t80 driver in s6105_defconfig xtensa: add m41t62 rtc to s6105 platform xtensa: enable s6gmac in s6105_defconfig xtensa: s6105 specific configuration for s6gmac s6gmac: xtensa s6000 on-chip ethernet driver xtensa: support s6000 gpio irqs and alternate function selection xtensa: s6000 dma engine support xtensa: allow variant to initialize own irq chips xtensa: cache inquiry and unaligned cache handling functions
2009-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits) via-velocity: Fix velocity driver unmapping incorrect size. mlx4_en: Remove redundant refill code on RX mlx4_en: Removed redundant check on lso header size mlx4_en: Cancel port_up check in transmit function mlx4_en: using stop/start_all_queues mlx4_en: Removed redundant skb->len check mlx4_en: Counting all the dropped packets on the TX side usbnet cdc_subset: fix issues talking to PXA gadgets Net: qla3xxx, remove sleeping in atomic ipv4: fix NULL pointer + success return in route lookup path isdn: clean up documentation index cfg80211: validate station settings cfg80211: allow setting station parameters in mesh cfg80211: allow adding/deleting stations on mesh ath5k: fix beacon_int handling MAINTAINERS: Fix Atheros pattern paths ath9k: restore PS mode, before we put the chip into FULL SLEEP state. ath9k: wait for beacon frame along with CAB acer-wmi: fix rfkill conversion ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling ...
2009-06-22ppp: Fix throttling bugsAlan Cox
The ppp layer goes around calling the unthrottle method from non sleeping paths. This isn't safe because the unthrottle methods in the tty layer need to be able to sleep (consider a USB dongle). Until now this didn't show up because the ppp layer never actually throttled a port so the unthrottle was always a no-op. Currently it's a mutex taking path so warnings are spewed if the unthrottle occurs via certain paths. Fix this by removing the unneccessary unthrottle calls. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22s6gmac: xtensa s6000 on-chip ethernet driverOskar Schirmer
The s6000 on-chip MAC supports 10/100/1000Mbit and is connected to an external PHY via MII or RGMII interface. [jw@emlix.com: don't use device->bus_id directly] Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glockner <dg@emlix.com> Acked-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-21via-velocity: Fix velocity driver unmapping incorrect size.Dave Jones
When a packet is greater than ETH_ZLEN, we end up assigning the boolean result of a comparison to the size we unmap. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Remove redundant refill code on RXYevgeny Petrilin
Our RX rings are always full, there is no need to check whether we need to fill them or not. If we fail to allocate a new socket buffer, the incoming packet is dropped an the ring remains full. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Removed redundant check on lso header sizeYevgeny Petrilin
This check that verifies that the LSO header along with control segment and first data segment do not cross 128 bytes is no longer required. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Cancel port_up check in transmit functionYevgeny Petrilin
When closing the port, we stop all transmit queues under the transmit lock. It ensures that we will not attempt to transmit new packets after the physical port was closed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: using stop/start_all_queuesYevgeny Petrilin
After we moved to be a multi queue device, need to stop/start all of our transmit queues. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Removed redundant skb->len checkYevgeny Petrilin
We don't need this check in the transmit function Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Counting all the dropped packets on the TX sideYevgeny Petrilin
Reporting the counter's value through 'ethtool -S' Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21cnic: Fix __symbol_get() build error.Michael Chan
Ingo molnar <mingo@elte.hu> reported the error drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’ when CONFIG_MODULES is not defined. Fix by using symbol_get() instead. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21Revert "[SCSI] cnic: fix error: implicit declaration of function ↵James Bottomley
‘__symbol_get’" This reverts commit bc3bf8fd330ce981ce632a1a4a283eee46838f32. All the commit did was add a second #include of <linux/module.h> which is the wrong fix. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-20usbnet cdc_subset: fix issues talking to PXA gadgetsDavid Brownell
The host-side CDC subset driver is binding more specifically than it should ... only to PXA 210/25x/26x Linux-USB gadgets. Loosen that restriction to match the gadget driver driver. This will various PXA 27x and PXA 3xx devices happier when talking to Linux hosts, potentially others. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Aric D. Blumer <aric@sdgsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-20Net: qla3xxx, remove sleeping in atomicJiri Slaby
We cannot sleep in ql_reset_work under spinlock, unlock before sleep, relock after. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-06-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits) powerpc/5121: make clock debug output more readable powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback fbdev/xilinxfb: Fix improper casting and tighen up probe path usb/ps3: Add missing annotations powerpc: Add memory clobber to mtspr() powerpc: Fix invalid construct in our CPU selection Kconfig ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access powerpc: Add configurable -Werror for arch/powerpc of_serial: Add UPF_FIXED_TYPE flag drivers/hvc: Add missing __devexit_p() net/ps3: gelic - Add missing annotations powerpc: Introduce macro spin_event_timeout() powerpc/warp: Fix ISA_DMA_THRESHOLD default powerpc/bootwrapper: Custom build options for XPedite52xx targets powerpc/85xx: Add defconfig for X-ES MPC85xx boards powerpc/85xx: Add dts files for X-ES MPC85xx boards powerpc/85xx: Add platform support for X-ES MPC85xx boards 83xx: add support for the kmeter1 board. ...
2009-06-19convert some DMA_nnBIT_MASK() callersAndrew Morton
We're about to make DMA_nnBIT_MASK() emit `deprecated' warnings. Convert the remaining stragglers which are visible to the x86_64 build. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric Moore <Eric.Moore@lsil.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Yi Zou <yi.zou@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19ath5k: fix beacon_int handlingJiri Slaby
73ca5203366235f8a43e490767284ba8cfd8c479 (ath5k: remove conf->beacon_int usage) removed bintval setting from ath5k_config. We need to init the interval earlier and don't touch it in add_interface anymore. Otherwise it will be set only once by upper layer through bss_info_changed but not on second and further hostap executions. We ended up having bintval 1000 which rendered the AP useless on many clients. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19ath9k: restore PS mode, before we put the chip into FULL SLEEP state.Gabor Juhos
We want to put the chip into FULL SLEEP state, when we are disabling the radio, but the the current code always change it to AWAKE/NETWORK SLEEP. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19ath9k: wait for beacon frame along with CABGabor Juhos
Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disablingJouni Malinen
This reverts 'ath5k: remove dummy PCI "retry timeout" fix' on the same theory as in 'ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling'. Reported-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disablingJouni Malinen
An earlier commit, 'ath9k: remove dummy PCI "retry timeout" fix', removed code that was documented to disable RETRY_TIMEOUT register (PCI reg 0x41) since it was claimed to be a no-op. However, it turns out that there are some combinations of hosts and ath9k-supported cards for which this is not a no-op (reg 0x41 has value 0x80, not 0) and this code (or something similar) is needed. In such cases, the driver may be next to unusable due to very frequent PCI FATAL interrupts from the card. Reverting the earlier commit, i.e., restoring the RETRY_TIMEOUT disabling, seems to resolve the issue. Since the removal of this code was not based on any known issue and was purely a cleanup change, the safest option here is to just revert that commit. Should there be desire to clean this up in the future, the change will need to be tested with a more complete coverage of cards and host systems. http://bugzilla.kernel.org/show_bug.cgi?id=13483 Cc: stable@kernel.org Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19zd1211rw: adding 083a:e503 as a ZD1211B deviceHin-Tak Leung
Hans Pontar reported success on the sourceforge zd1211-devs mailing list. The device is branded "Arcor Easy Stick A 50 WLAN" (device manufactured by SMC for a German ISP - SMC model name: WN4501H-LF-IR). General information and Windows driver are available under (German only): http://www.arcor.de/hilfe/neu/index.php?sid=&aktion=anzeigen&rubrik=004018140&id=487 Device details: USB-IDs: Vendor: 0x083A Device: 0xE503 Chip ID: zd1211b chip 083a:e503 v4810 high 00-1d-19 AL2230S_RF pa0 g--N- Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Hans Pontar <pontar@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: add a mutex to protect iwm_reset_workerZhu Yi
The patch adds a mutex to protect the iwm_reset_worker against netdev ndo_open and ndo_stop because all of them call iwm_up and iwm_down in the implementation. Note the latter two are already protected by rtnl. So if iwm_reset_worker is not required in the future, the mutex can also be removed. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: fix potential kernel oops on module removalZhu Yi
The iwm_if_free() is called before destroy_workqueue for isr_wq on device remove method. But if there is still some pending work in the isr_wq, the required data structures are already freed at this point. This leeds a kernel oops. The patch fixes this problem by moving iwm_if_free after destroy_workqueue. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: add iwm_if_add and iwm_if_removeZhu Yi
We used to do alloc_netdev and register_netdev at the same time in iwm_if_alloc. But some bus related structures will only be initialized after iwm_priv is allocated. This caused a race condition that the netdev might be registered earlier. The patch adds iwm_if_add and iwm_if_remove so that the bus layer could register the device after all initialization is done. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: check for iwm_priv_init errorZhu Yi
We need to check for iwm_priv_init() errors and do proper cleanups. Otherwise we may fail to catch the create_singlethread_workqueue() error which will cause a kernel oops when destroy_workqueue() later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19mv643xx_eth: fix unicast filter programming in promiscuous modePrabhanjan Sarnaik
The Unicast Promiscious Mode (UPM) bit in the mv643xx_eth port configuration register doesn't do exactly what its name would suggest: setting this bit merely enables reception of all unicast frames with a destination address that differs from our local MAC address in bits [47:4]. In particular, it doesn't have any effect on unicast frames with a destination address that matches our MAC address in bits [47:4] -- these will still be tested against the 16-entry unicast address filter table. Therefore, if the interface is set to promiscuous mode, just setting the unicast promiscuous bit isn't enough -- we need to set all filter bits in the unicast filter table to 1 as well. Reported-by: Sachin Sanap <ssanap@marvell.com> Signed-off-by: Prabhanjan Sarnaik <sarnaik@marvell.com> Tested-by: Siddarth Gore <gores@marvell.com> Tested-by: Mahavir Jain <mjain@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19r8169: remove unused variableFlorian Westphal
all references got removed by 865c652d6be9929927cabdc54b137b7541eb6612 (r8169: remove non-napi code). Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19e1000e: stop unnecessary polling when using msi-xAndy Gospodarek
The last hunk of this commit: commit 12d04a3c12b420f23398b4d650127642469a60a6 Author: Alexander Duyck <alexander.h.duyck@intel.com> Date: Wed Mar 25 22:05:03 2009 +0000 e1000e: commonize tx cleanup routine to match e1000 & igb changed the logic for determining if we should call napi_complete or not at then end of a napi poll. If the NIC is using MSI-X with no work to do in ->poll, net_rx_action can just spin indefinitely on older kernels and for 2 jiffies on newer kernels since napi_complete is never called and budget isn't decremented. Discovered and verified while testing driver backport to an older kernel. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19cdc_ether: additional PID's to the whitelistJonas Sjöquist
This patch adds five PID's to the whitelist set of devices. Devices added to the whitelist: Dell Wireless 5530 HSPA Ericsson Mobile Broadband Module variants (F3507g, F3607gw and F3307) Toshiba F3507g Signed-off-by: Jonas Sjöquist <jonas.sjoquist@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: receive asynchronous link status notifications from BESathya Perla
Rcv and process ansync link status notifications from BE instead of polling for link status in the be_worker thread. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: cleanup multicast_set cmd to avoid mc_list copySathya Perla
Cleanup multicast_set method to avoid an extra copy of mc_list and unwanted promiscuos sets to BE. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: Use MCC queue for cmds that may be called in BH contextSathya Perla
Currenlty multicast_set and promiscuous_config cmds -- that may be called in BH context -- use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. So, these two cmds in BH context must use the MCC queue to post cmds. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: Add MCC queue mechanism for BE cmdsSathya Perla
Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. Instead cmds that may be called in BH context must use the MCC queue to post cmds. The cmd completions are rcvd in a separate completion queue and the events are placed in the tx-event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19pegasus usb-net: Fix endianness bugsMichael Buesch
This fixes various endianness bugs. Some harmless and some real ones. This is tested on a PowerPC-64 machine. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits) netxen: fix tx ring accounting netxen: fix detection of cut-thru firmware mode forcedeth: fix dma api mismatches atm: sk_wmem_alloc initial value is one net: correct off-by-one write allocations reports via-velocity : fix no link detection on boot Net / e100: Fix suspend of devices that cannot be power managed TI DaVinci EMAC : Fix rmmod error net: group address list and its count ipv4: Fix fib_trie rebalancing, part 2 pkt_sched: Update drops stats in act_police sky2: version 1.23 sky2: add GRO support sky2: skb recycling sky2: reduce default transmit ring sky2: receive counter update sky2: fix shutdown synchronization sky2: PCI irq issues sky2: more receive shutdown sky2: turn off pause during shutdown ... Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
2009-06-18netxen: fix tx ring accountingDhananjay Phadke
This forces every update of tx ring producer to check for availability of space for next full TSO command. Earlier firmware control commands didn't care to pause tx queue. Stop the tx queue if there's not enough space to transmit one full LSO command left on the tx ring after current transmit. This avoids returning NETDEV_TX_BUSY after checking distance between producer and consumer on every cpu. Restart the tx queue only if we have cleaned up enough tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-08 21:16:44 +0000