summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net_cls_act: act_simple dont ignore realloc code iwlwifi: make IWLWIFI a tristate Revert "atm: Do not free already unregistered net device." dccp: return -EINVAL on invalid feature length irda: fix !PNP support for drivers/net/irda/smsc-ircc2.c irda: fix !PNP support in drivers/net/irda/nsc-ircc.c net_cls_act: Make act_simple use of netlink policy. ip: Use inline function dst_metric() instead of direct access to dst->metric[] ip: Make use of the inline function dst_metric_locked() atm: Bad locking on br2684_devs modifications. atm: Do not free already unregistered net device. mac80211: Do not free net device after it is unregistered. bridge: Consolidate error paths in br_add_bridge(). bridge: Net device leak in br_add_bridge(). niu: Fix probing regression for maramba on-board chips. lapbeth: Release ->ethdev when unregistering device. xfrm: convert empty xfrm_audit_* macros to functions net: Fix useless comment reference loop. sch_htb: remove from event queue in htb_parent_to_leaf()
2008-05-06iwlwifi: make IWLWIFI a tristateAdrian Bunk
IWLWIFI should be a tristate so that if IWLCORE and/or IWL3945 are m and none of them is y kbuild doesn't create an empty drivers/net/wireless/built-in.o This patch also removes the pointless "default n". Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Support creation of FMRs with pages smaller than 4K IB/ehca: Fix function return types RDMA/cxgb3: Bump up the MPA connection setup timeout. RDMA/cxgb3: Silently ignore close reply after abort. RDMA/cxgb3: QP flush fixes IB/ipoib: Fix transmit queue stalling forever IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()
2008-05-05mlx4_core: Support creation of FMRs with pages smaller than 4KOren Duer
Don't hard code a test against a minimum page shift of 12, since the device may support smaller pages. Test against the actual smallest page size from the device capabilities. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05irda: fix !PNP support for drivers/net/irda/smsc-ircc2.cIngo Molnar
x86.git testing found this build bug on v2.6.26-rc1: ERROR: "pnp_get_resource" [drivers/net/irda/smsc-ircc2.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 the driver did not anticipate the case of !CONFIG_PNP which is rare but still possible. Instead of restricting the driver to PNP-only in the Kconfig space, add the (trivial) dummy struct pnp_driver - this is that other drivers use in the !PNP case too. The driver itself can in theory be initialized on !PNP too in certain cases, via smsc_ircc_legacy_probe(). Patch only minimally build tested, i dont have this hardware. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05irda: fix !PNP support in drivers/net/irda/nsc-ircc.cIngo Molnar
x86.git testing found the following build failure in latest -git: drivers/built-in.o: In function `nsc_ircc_pnp_probe': nsc-ircc.c:(.text+0xdf1b6): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1d4): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1ee): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf237): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf24c): undefined reference to `pnp_get_resource' drivers/built-in.o:nsc-ircc.c:(.text+0xdf266): more undefined references to `pnp_get_resource' follow make: *** [.tmp_vmlinux1] Error 1 triggered via this config: http://redhat.com/~mingo/misc/config-Sat_May__3_20_53_13_CEST_2008.bad while generally most users will have PNP enabled, drivers can support non-PNP build mode too - and most drivers implement it. That is typically done by providing a dummy pnp_driver structure that will not probe anything. The fallback routines in the driver will handle this dumber mode of operation too. This patch implements that. I have not tested whether this actually works on real hardware so take care. It does resolve the build bug. [ Another solution that is used by a few drivers is to exclude the driver in the Kconfig if PNP is disabled, via "depends on PNP", but this would limit the availability of the driver needlessly. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04niu: Fix probing regression for maramba on-board chips.David S. Miller
Changeset 7f7c4072ea552f97a0898331322f71986a97299c ("niu: Determine the # of ports from the card's VPD data") caused maramba on-board NIU ports to stop probing properly. The old code had a fallback that would use a num_ports value of 4 if all the probing methods failed, but that was removed. This restores the fallback of 4 ports, to get things working again. Bump driver version and release date. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03lapbeth: Release ->ethdev when unregistering device.David S. Miller
Otherwise it leaks forever. Based upon a report by Roland <devzero@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) rose: Wrong list_lock argument in rose_node seqops netns: Fix reassembly timer to use the right namespace netns: Fix device renaming for sysfs bnx2: Update version to 1.7.5. bnx2: Update RV2P firmware for 5709. bnx2: Zero out context memory for 5709. bnx2: Fix register test on 5709. bnx2: Fix remote PHY initial link state. bnx2: Refine remote PHY locking. bridge: forwarding table information for >256 devices tg3: Update version to 3.92 tg3: Add link state reporting to UMP firmware tg3: Fix ethtool loopback test for 5761 BX devices tg3: Fix 5761 NVRAM sizes tg3: Use constant 500KHz MI clock on adapters with a CPMU hci_usb.h: fix hard-to-trigger race dccp: ccid2.c, ccid3.c use clamp(), clamp_t() net: remove NR_CPUS arrays in net/core/dev.c net: use get/put_unaligned_* helpers bluetooth: use get/put_unaligned_* helpers ...
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Remove unsupported wakeup sources [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static [POWERPC] PS3: Add time include to lpm [POWERPC] Fix slb.c compile warnings [POWERPC] Xilinx: Fix compile warnings [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c [RAPIDIO] fix current kernel-doc notation [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot Fix a potential issue in mpc52xx uart driver [POWERPC] mpc5200: Allow for fixed speed MII configurations [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-02bnx2: Update version to 1.7.5.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Update RV2P firmware for 5709.Michael Chan
The new RV2P firmware fixes 2 issues: 1. The jumbo rx buffer page size is now configurable and set to the proper PAGE_SIZE. Before, it was assumed to be always 4K. 2. Driver sometimes would crash when receiving jumbo packets mixed with firmware management packets. This was caused by the old firmware DMA'ing to the wrong address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Zero out context memory for 5709.Michael Chan
We should zero out the context memory for 5709 before each reset. When we resume after suspend for example, the memory may not be zero and the chip may not function correctly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix register test on 5709.Michael Chan
The register BNX2_CTX_STATUS (0x1004) should be skipped on 5709 as it contains reserved bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix remote PHY initial link state.Michael Chan
On some remote PHY blade systems, the driver receives no initial link interrupt. As a result, the GMII/MII MAC mode does not get setup properly. To fix this problem, we add an initial poll of the link state after chip reset. With this change, the setting of the initial carrier state in the init code can be eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Refine remote PHY locking.Michael Chan
bnx2_set_remote_link() should be called under bp->phy_lock to protect against concurrent polling and interrupt calls. This change is needed by the next patch which will add one initial poll of the remote PHY link status. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Update version to 3.92Matt Carlson
This patch updates the version number to 3.92. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Add link state reporting to UMP firmwareMatt Carlson
All variants of the 5714, 5715, and 5780 offer a feature called the "Universal Management Port". This feature is implemented in firmware and is largely transparent to the driver, except... It turns out that the UMP firmware needs to know the current status of the link. Because the firmware cannot touch the PHY registers while the driver is in control of the device, it needs the driver to report link status changes through an additional handshaking mechanism. Without this handshake, it has been observed in the field that the UMP firmware will not operate correctly. This patch implements the new handshake with the UMP firmware. Since the handshake uses the same mechanism ASF heartbeats use, code was added to detect and wait for completion of a pending previous event. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix ethtool loopback test for 5761 BX devicesMatt Carlson
A CPMU related loopback test bug existed for AX revisions of the 5761. While that errata has been fixed, the CPMU still slows down the core clock too far to run the loopback test successfully. This patch disables the CPMU LINK_SPEED mode just like we do with the AX revisions of the 5761 and all revisions of the 5784. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix 5761 NVRAM sizesMatt Carlson
The 5761 NVRAM sizes assigned to the nvram_size member are half as big as they should be. This patch corrects the NVRAM sizes and replaces the hardcoded constants with preprocessor constants for readability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Use constant 500KHz MI clock on adapters with a CPMUMatt Carlson
The MI clock is not configured correctly on adapters with the CPMU present. The tg3 driver has code which statically sets the MI clock to be a fraction of the speed at which the core clock is running. However, the CPMU can change the adapter's core clock frequency based on operating conditions. Consequently, the MI will run slow when the core's clock has been slowed down. There is a new 500KHz constant frequency clock available on adapters with a CPMU. This patch removes the static core clock scaling and configures the MI clock to use this new 500KHz clock instead. Running the MI clock at slower speeds will not directly result in data corruption, but it does challenge the PHY read and write routine timeouts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02virtio: explicit advertisement of driver featuresRusty Russell
A recent proposed feature addition to the virtio block driver revealed some flaws in the API: in particular, we assume that feature negotiation is complete once a driver's probe function returns. There is nothing in the API to require this, however, and even I didn't notice when it was violated. So instead, we require the driver to specify what features it supports in a table, we can then move the feature negotiation into the virtio core. The intersection of device and driver features are presented in a new 'features' bitmap in the struct virtio_device. Note that this highlights the difference between Linux unsigned-long bitmaps where each unsigned long is in native endian, and a straight-forward little-endian array of bytes. Drivers can still remove feature bits in their probe routine if they really have to. API changes: - dev->config->feature() no longer gets and acks a feature. - drivers should advertise their features in the 'feature_table' field - use virtio_has_feature() for extra sanity when checking feature bits Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio: finer-grained features for virtio_netRusty Russell
So, we previously had a 'VIRTIO_NET_F_GSO' bit which meant that 'the host can handle csum offload, and any TSO (v4&v6 incl ECN) or UFO packets you might want to send. I thought this was good enough for Linux, but it actually isn't, since we don't do UFO in software. So, add separate feature bits for what the host can handle. Add equivalent ones for the guest to say what it can handle, because LRO is coming too (thanks Herbert!). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio: wean net driver off NETDEV_TX_BUSYRusty Russell
Herbert tells me that returning NETDEV_TX_BUSY from hard_start_xmit is seen as a poor thing to do; we should cache the packet and stop the queue. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-05-02virtio: fix scatterlist sizing in net driver.Rusty Russell
Herbert Xu points out (within another patch) that my scatterlists are too short: one entry for the gso header, one for the skb->data, and MAX_SKB_FRAGS for all the fragments. Fix both xmit and recv sides (recv currently unused, coming in later patch). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio: fix tx_ stats in virtio_netRusty Russell
get_buf() gives the length written by the other side, which will be zero. We want to add the skb length. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-05-01rt2x00: Fix quality/activity led handlingIvo van Doorn
There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01rt2x00: Don't enable short preamble for 1MBsIvo van Doorn
The timing settings for 1MBs should exclude the short preamble bit since that only applies to 2MBs, 5.5MBs and 11MBs. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01iwlwifi: fix debug messages during scanningBill Moss
direct_mask will be set when we are not associated and requesting a direct scan. The second debug print will be confusing as priv->essid is not set at that time and it will thus print "<hidden>" while it is known to which AP a direct scan is requested - as previous debug message also indicates. Now make all debugging consistent. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01iwlwifi: fix current channel is not scannedGuy Cohen
All channels should be scanned, including the current channel when the client is associated. Removed also unused flag to scan only active channels. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01b43: Fix some TX/RX locking issuesMichael Buesch
This fixes some TX/RX related locking issues. With this patch applied, some of the PHY transmission errors are fixed. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01[POWERPC] mpc5200: Allow for fixed speed MII configurationsGrant Likely
Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2008-05-01m68knommu: fix FEC driver lockingSebastian Siewior
It's easy: grab locks before talking to hardware and realease them afterwards. The one big lock has been splitted into a hw_lock and mii_lock. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: kill warnings in FEC driverSebastian Siewior
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init': linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j' linux-2.6-mk68/drivers/net/fec.c: At top level: linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused interrupts in FEC driverGreg Ungerer
Remove the acquisition of unused interrupt types. We don't need to register all the TX and RX varients used on some ColdFire FEC hardware. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix ColdFire 5272 fec driver hash registersGreg Ungerer
Renamed the 5272 hash_table registers to match the "grp" hash_table registers of the other ColdFire parts. They are actually a group hash. The makes for consistent setup across all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01net: fix returning void-valued expression warningsHarvey Harrison
drivers/net/8390.c:37:2: warning: returning void-valued expression drivers/net/bnx2.c:1635:3: warning: returning void-valued expression drivers/net/xen-netfront.c:1806:2: warning: returning void-valued expression net/ipv4/tcp_hybla.c:105:3: warning: returning void-valued expression net/ipv4/tcp_vegas.c:171:3: warning: returning void-valued expression net/ipv4/tcp_veno.c:123:3: warning: returning void-valued expression net/sysctl_net.c:85:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-04-30libertas: fix use-before-check violationHolger Schurig
According to Coverity (kudo's to Adrian Bunk), we had one use-before-check bug in libe libertas driver. This patch fixes this issue. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30b43: Fix dual-PHY devicesMichael Buesch
This fixes operation of dual-PHY (A/B/G) devices. Do not anounce the A-PHY to mac80211, as that's not supported, yet. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits) tcp: Overflow bug in Vegas [IPv4] UFO: prevent generation of chained skb destined to UFO device iwlwifi: move the selects to the tristate drivers ipv4: annotate a few functions __init in ipconfig.c atm: ambassador: vcc_sf semaphore to mutex MAINTAINERS: The socketcan-core list is subscribers-only. netfilter: nf_conntrack: padding breaks conntrack hash on ARM ipv4: Update MTU to all related cache entries in ip_rt_frag_needed() sch_sfq: use del_timer_sync() in sfq_destroy() net: Add compat support for getsockopt (MCAST_MSFILTER) net: Several cleanups for the setsockopt compat support. ipvs: fix oops in backup for fwmark conn templates bridge: kernel panic when unloading bridge module bridge: fix error handling in br_add_if() netfilter: {nfnetlink,ip,ip6}_queue: fix skb_over_panic when enlarging packets netfilter: x_tables: fix net namespace leak when reading /proc/net/xxx_tables_names netfilter: xt_TCPOPTSTRIP: signed tcphoff for ipv6_skip_exthdr() retval tcp: Limit cwnd growth when deferring for GSO tcp: Allow send-limited cwnd to grow up to max_burst when gso disabled [netdrvr] gianfar: Determine TBIPA value dynamically ...
2008-04-30Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix crashkernel= handling when no crashkernel= specified [POWERPC] Make emergency stack safe for current_thread_info() use [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h [POWERPC] spufs: trace spu_acquire_saved events [POWERPC] spufs: fix marker name for find_victim [POWERPC] spufs: add marker for destroy_spu_context [POWERPC] spufs: add sputrace marker parameter names [POWERPC] spufs: add context switch notification log [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200 [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format [POWERPC] mpc5200: Fix FEC error handling on FIFO errors [POWERPC] mpc5200: add Phytec pcm030 board support [POWERPC] mpc5200: add gpiolib support for mpc5200 [POWERPC] mpc5200: add interrupt type function [POWERPC] mpc5200: Fix unterminated of_device_id table
2008-04-30tty: add throttle/unthrottle helpersAlan Cox
Something Arjan suggested which allows us to clean up the code nicely Signed-off-by: Alan Cox <alan@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30strip: Fix up strip for the new orderAlan Cox
- Use the tty baud functions - Call driver termios methods directly holding the right locking - Check for a write method Signed-off-by: Alan Cox <alan@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty: The big operations reworkAlan Cox
- Operations are now a shared const function block as with most other Linux objects - Introduce wrappers for some optional functions to get consistent behaviour - Wrap put_char which used to be patched by the tty layer - Document which functions are needed/optional - Make put_char report success/fail - Cache the driver->ops pointer in the tty as tty->ops - Remove various surplus lock calls we no longer need - Remove proc_write method as noted by Alexey Dobriyan - Introduce some missing sanity checks where certain driver/ldisc combinations would oops as they didn't check needed methods were present [akpm@linux-foundation.org: fix fs/compat_ioctl.c build] [akpm@linux-foundation.org: fix isicom] [akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build] [akpm@linux-foundation.org: fix kgdb] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30pc300: Update to tty_set_operationsAlan Cox
This driver somehow escaped the tty operations changes way back when. Update it so that we can switch to tty->ops shortly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29iwlwifi: move the selects to the tristate driversAdrian Bunk
This patch moves the following select's: - RFKILL : IWLWIFI_RFKILL -> IWLCORE - RFKILL_INPUT : IWLWIFI_RFKILL -> IWLCORE - MAC80211_LEDS : IWL4965_LEDS -> IWLCORE - LEDS_CLASS : IWL4965_LEDS -> IWLCORE - MAC80211_LEDS : IWL3945_LEDS -> IWL3945 - LEDS_CLASS : IWL3945_LEDS -> IWL3945 The effects are: - with IWLCORE=m and/or IWL3945=m RFKILL/RFKILL_INPUT/MAC80211_LEDS/LEDS_CLASS are no longer wrongly forced to y - fixes a build error with IWLCORE=y, IWL4965=m might be a bug in kconfig causing it, but doing this change that is anyway the right thing fixes it Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
2008-04-29mlx4_core: Avoid recycling old FMR R_Keys too soonOlaf Kirch
When a FMR is unmapped, mlx4 resets the map count to 0, and clears the upper part of the R_Key which is used as the sequence counter. This poses a problem for RDS, which uses ib_fmr_unmap as a fence operation. RDS assumes that after issuing an unmap, the old R_Keys will be invalid for a "reasonable" period of time. For instance, Oracle processes uses shared memory buffers allocated from a pool of buffers. When a process dies, we want to reclaim these buffers -- but we must make sure there are no pending RDMA operations to/from those buffers. The only way to achieve that is by using unmap and sync the TPT. However, when the sequence count is reset on unmap, there is a high likelihood that a new mapping will be given the same R_Key that was issued a few milliseconds ago. To prevent this, don't reset the sequence count when unmapping a FMR. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 09:45:27 +0000