summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-01-29b43: Accessing the TSF via mac80211Alina Friedrichsen
This allows the mac80211 high level code to access the TSF. This is e.g. needed for BSSID merges in the IBSS mode. The second version adds locking and removes the now unnecessary debugfs entries. Thanks to Michael Buesch! :) Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Generic TSF debuggingAlina Friedrichsen
This patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: iwl_tx_queue_alloc : fix warning in printk formattingWinkler, Tomas
This patch fix compilation warning in printk formatting iwl_tx_queue_alloc function. Cleanup the code a bit on the way. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: remove useless #definesDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: clean up and clarify micinit()Dan Williams
Fix some endian issues too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: use __attribute__ ((packed)) not #pragmaDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Fix phy_g.c compiler warningMichael Buesch
Fix compile warning for non-debug builds: drivers/net/wireless/b43/phy_g.c: In function ‘b43_gphy_op_recalc_txpower’: drivers/net/wireless/b43/phy_g.c:3195: warning: unused variable ‘dbm’ Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: clean up WEP key operationsDan Williams
get_wep_key() and set_wep_key() combind both get/set of the actual WEP key and get/set of the transmit index into the same functions. Split those out so it's clearer what is going one where. Add error checking to WEP key hardware operations too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: simplify WEP index and capability checksDan Williams
Do the computation once at init time; don't ask the hardware every time. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: re-arrange WPA capability checksDan Williams
The capability register has to be read for other (upcoming) stuff, so fold the WPA test function back into _init_airo_card() and move the netdevice registration stuff above it so that the netdevice has a name by the time the card's capabilities are printed out. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29airo: clean up and clarify interrupt-time task handlingDan Williams
Split each specific interrupt-time task out into its own function to make airo_interrupt() actually readable. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: fix probe mask for 39 scan APIWinkler, Tomas
This pach make use of 39 own scan probe mask the variables or of different types Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Remaining host command cleanupsSamuel Ortiz
With the recent host command routines merge, we can now look at the various host command helpers and get rid of the duplicated ones. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Add restart_fw module parameterSamuel Ortiz
In order to be in sync with the agn code, we're ading a fw_restart3945 module parameter to iwl3945. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Getting rid of priv->antennaSamuel Ortiz
The iwl_priv antenna field is useless as we can simply use the corresponding mod_params antenna field. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: Remove IWL3945_DEBUGSamuel Ortiz
IWL3945_DEBUG is pointless and obsolete. We already have an IWLWIFI_DEBUG symbol, that needs to be set if we actually want to get 3945 debug (see iwl-debug.h). Thus, we can simply get rid of this symbol. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Use the iwlcore geos routinesSamuel Ortiz
By removing the init_rates() routine outside of the init_geos() one, we can share the geos routines between 3945 and agn. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Use iwl-eeprom.c routinesSamuel Ortiz
By adding the eeprom ops to the 3945 code, we can now use the iwlcore eeprom routines (defined in iwl-eeprom.c). We also removed the heavy eeprom39 reference from iwl_priv and use the eeprom pointer instead. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Use iwlcore TX queue management routinesSamuel Ortiz
By adding an additional hw_params (tfd_size) and a new iwl_lib ops (txq_init), we can now use the iwlcore TX queue management routines. We had to add a new hw_params because we need to allocate the right DMA buffer for TFDs, and those have a different sizes depending if you're on 3945 or agn. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: make iwl_tx_queue->tfds void*Samuel Ortiz
Instead of having both tfds and tfds39, we can just have a void *tfds. It makes the tx_queue structure nicer, and the code cleaner. It also helps with further TX queues management code merging. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Use iwlcore scan codeSamuel Ortiz
A lot of the scanning related code is duplicated between 3945 and agn. Let's use the iwlcore one and get rid of the 3945. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Define send_tx_powerSamuel Ortiz
We can define this iwl_lib ops for 3945, as this would help us cleaning the scanning code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlagn: reduce off channel reception for 4965Rick Farrington
Force use of chains B and C (0x6) for Rx for 4965 Avoid A (0x1) because of its off-channel reception on A-band. Signed-off-by: Rick Farrington <rickdic@hotmail.com> Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: add test to determine if interface in monitor modeChatre, Reinette
mac80211 sets driver in monitor mode through configuring the RX filters. We cannot trust priv->iw_mode to be accurate regarding monitor mode as iw_mode is only set in add_interface, which is not called by mac80211 when in monitor mode. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Automatically probe for opensource firmwareMichael Buesch
First probe for proprietary firmware and then probe for opensource firmware. This way around it's a win-win situation. 1) If proprietary fw is available, it will work. 2) If opensource firmware is available, but no proprietary (Distros can only ship open fw) it might work. 3) If both open and proprietary are available, it will work, because it selects the proprietary. We currently don't prefer the open fw in this case, because it doesn't work on all devices. It would introduce a regression otherwise. The remaining FIXMEs in this patch are harmless, because they only matter on multiband devices, which are not implemented yet anyway. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rtl8187: Fix driver to return TX retry info for RTL8187LLarry Finger
Current code for the RTL8187 is not returning valid retry information, thus the rate-setting mechanism is not functioning. As a further complication, this info is only obtained by reading a register, which cannot be read while in interrupt context. This patch implements the TX status return to mac80211 through the use of a work queue. One additional problem is that the driver currently enables the rate fallback mechanism of the device, which conflicts with the mac80211 rate-setting algorithm. This version of the patch disables rate fallback. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Martín Ernesto Barreyro <barreyromartin@gmail.com> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rtl8187: Increase receive queue depthLarry Finger
The receive queue depth in rtl8187 may not be long enough to keep the pipe full. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rtl8187: Fix locking of private dataLarry Finger
In rtl8187_add_interface(), the mutex that protects the data in struct rtl8187_priv does not include all references to that structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: fix CF firmware loading for some cardsDan Williams
if_cs_poll_while_fw_download() returned the number of iterations remaining on success, which in turn got returned as the value from if_cs_prog_real() and if_cs_prog_helper(). But since if_cs_probe() interprets non-zero return values from firmware load functions as an error, this sometimes caused spurious firmware load failures. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Simplify suspend/resume handlingIvo van Doorn
With mac80211 handling all open interfaces during suspend and resume we can simplify suspend/resume within rt2x00lib. The only thing rt2x00 needs to do is free up memory during suspend and bring back the minimal required components during resume. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Restrict firmware file lengthsIvo van Doorn
Add extra security to the drivers for firmware loading, check the firmware file length before uploading it to the hardware. Incorrect lengths might indicate a firmware upgrade (which is not yet supported by the driver) or otherwise incorrect firmware. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: rt2x00_rev() should return u32Ivo van Doorn
The "rev" field in chipset definition is an u32, which means that rt2x00_rev() which returns that field should be of the same type. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Clean up the way the eeprom antenna configuration is readVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Remove unused ath9k_hw_select_antconfig() from hw.cVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix bug in NF calibrationSujith
The number of chainmasks for AR9285 weren't being setup when running NF calibration. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix bug in rate control capability registrationSujith
Dual stream capability must be registered only when the hardware supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix MCS rates registration bug for AR9285Sujith
AR9285 based devices support only single stream MCS rates. This patch fixes a bug where dual stream stream rates were also being registered. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Read and write the TSF via debugfsAlina Friedrichsen
This patch adds an ath9k specific entry to read, write and reset the TSF into the debugfs, like in ath5k. This makes debugging the IBSS handling of wifi drivers _much_ easier. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Read and write the TSF via debugfsAlina Friedrichsen
This patch updates the ath5k specific entry in the debugfs to read and reset the TSF value, to allowing write it, too. This makes debugging the IBSS handling of wifi drivers _much_ easier. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: simplify regulatory codeLuis R. Rodriguez
Now that cfg80211 has its own regulatory infrastructure we can condense ath9k's regulatory code considerably. We only keep data we need to provide our own regulatory_hint(), reg_notifier() and information necessary for calibration. Atheros hardware supports 12 world regulatory domains, since these are custom we apply them through the the new wiphy_apply_custom_regulatory(). Although we have 12 we can consolidate these into 5 structures based on frequency and apply a different set of flags that differentiate them on a case by case basis through the reg_notifier(). If CRDA is not found our own custom world regulatory domain is applied, this is identical to cfg80211's except we enable passive scan on most frequencies. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29cfg80211: rename fw_handles_regulatory to custom_regulatoryLuis R. Rodriguez
Drivers without firmware can also have custom regulatory maps which do not map to a specific ISO / IEC alpha2 country code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: honor the RTS/CTS bitsBob Copeland
The ath5k driver didn't use set_rts_threshold or use_cts_prot, and also didn't check the IEEE80211_TX_RC_USE_{RTS_CTS,CTS_PROTECT} RC flags. Tell the hardware about these so RTS/CTS will work, and so the device will work better in mixed b/g environments. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: use short preamble when possibleBob Copeland
ath5k previously ignored TX_RC_SHORT_PREAMBLE and did not use config->use_short_preamble, so the long preamble was always used for transmitted packets. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: remove unused led_off parameterBob Copeland
ath5k_softc->led_off hasn't been used since commit 3a078876caee9634dbb9b41e6269262e30e8b535, "convert LED code to use mac80211 triggers." Changes-licensed-under: 3-Clause-BSD Reported-by: Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29orinoco: trivial cleanup in alloc_orinocodevAndrey Borzenkov
Remove extra space; remove redundant cast Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29orinoco: convert to struct net_device_opsAndrey Borzenkov
No functional changes; use new kernel interface for netdev methods. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29wireless: restrict to 32 legacy ratesJohannes Berg
Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Remove unnecessary gpio configuration in ath9k_hw_reset()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix typo in chip version checkVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: constify ieee80211_if_conf.bssidJohannes Berg
Then one place can be a static const. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 21:50:48 +0000