summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow(). sch_gred: should not use GFP_KERNEL while holding a spinlock ipip, sit: copy parms.name after register_netdevice ipv6: Fix for adding multicast route for loopback device automatically. ssb: fix init regression with SoCs rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition mac80211: fix another race in aggregation start fsl_pq_mdio: Clean up tbi address configuration ppp: fix pptp double release_sock in pptp_bind() net/fec: fix the use of pdev->id ath9k: fix check for antenna diversity support batman-adv: delete global entry in case of roaming batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM Bluetooth: Correct version check in hci_setup btusb: fix a memory leak in btusb_send_frame() Bluetooth: bnep: Fix module reference Bluetooth: cmtp: Fix module reference Bluetooth: btmrvl: support Marvell Bluetooth device SD8797
2011-12-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: use new generic {enable,disable}_percpu_irq() routines drivers/net/ethernet/tile: use skb_frag_page() API asm-generic/unistd.h: support new process_vm_{readv,write} syscalls arch/tile: fix double-free bug in homecache_free_pages() arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
2011-12-07rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP ↵Philipp Dreimann
transition In drivers rtl8192ce, rtl8192cu, rtl8192se, and rtl8192de, break statements would allow ppsc->rfpwr_state to be changed to ERFSLEEP even though the device is actually in ERFOFF. Signed-off-by: Philipp Dreimann <philipp@dreimann.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07fsl_pq_mdio: Clean up tbi address configurationAndy Fleming
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07ppp: fix pptp double release_sock in pptp_bind()Djalal Harouni
Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07net/fec: fix the use of pdev->idShawn Guo
The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06ath9k: fix check for antenna diversity supportFelix Fietkau
fixes a regression on single-stream chips introduced in commit 43c3528430bd29f5e52438cad7cf7c0c62bf4583 "ath9k: implement .get_antenna and .set_antenna" Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06pasemi_mac: Fix building as moduleBen Hutchings
Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06netback: Fix alert message.Wei Liu
The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.françois romieu
Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05r8169: Rx FIFO overflow fixes.françois romieu
Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-03arch/tile: use new generic {enable,disable}_percpu_irq() routinesChris Metcalf
We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-12-03drivers/net/ethernet/tile: use skb_frag_page() APIChris Metcalf
This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-12-02iwlwifi: change the default behavior of watchdog timerWey-Yi Guy
The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlwifi: do not re-configure HT40 after associatedWey-Yi Guy
The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Cc: <stable@kernel.org> 3.1+ Reported-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02iwlagn: fix HW crypto for TX-only keysJohannes Berg
Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-30bonding: only use primary address for ARPHenrik Saavedra Persson
Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson <henrik.e.persson@ericsson.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30net: fec: Select the FEC driver by default for i.MX SoCsFabio Estevam
Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-28ath9k: Revert change that broke AR928X on Acer Ferrari OneRafael J. Wysocki
Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28rtlwifi: fix lps_lock deadlockStanislaw Gruszka
rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [<ffffffff8108e10d>] __lock_acquire+0x369/0xd0c [ 93.815947] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.815947] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.815947] [<ffffffffa025de34>] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [<ffffffffa025aec0>] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [<ffffffffa01d614b>] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [<ffffffffa01e0af3>] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [<ffffffff81075aa5>] process_one_work+0x205/0x3e7 [ 93.815947] [<ffffffff81076753>] worker_thread+0xda/0x15d [ 93.815947] [<ffffffff8107a119>] kthread+0xa8/0xb0 [ 93.815947] [<ffffffff814f3184>] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [<ffffffff814ea1a7>] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [<ffffffff814e9987>] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [<ffffffff810623ed>] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] <Interrupt> [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] <IRQ> [<ffffffff814dfd00>] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [<ffffffff8101a849>] ? save_stack_trace+0x2c/0x49 [ 93.815947] [<ffffffff8108d55c>] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [<ffffffff8108dc8a>] mark_lock+0x106/0x220 [ 93.815947] [<ffffffff8108e099>] __lock_acquire+0x2f5/0xd0c [ 93.815947] [<ffffffff810152af>] ? native_sched_clock+0x34/0x36 [ 93.830125] [<ffffffff810152ba>] ? sched_clock+0x9/0xd [ 93.830125] [<ffffffff81080181>] ? sched_clock_local+0x12/0x75 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff81422467>] ? skb_dequeue+0x62/0x6d [ 93.830125] [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffffa025f677>] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [<ffffffff8106281f>] tasklet_action+0x8d/0xee [ 93.830125] [<ffffffff810629ce>] __do_softirq+0x112/0x25a [ 93.830125] [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.830125] [<ffffffff81010bf6>] do_softirq+0x4b/0xa1 [ 93.830125] [<ffffffff81062d7d>] irq_exit+0x5d/0xcf [ 93.830125] [<ffffffff814f3b7e>] do_IRQ+0x8e/0xa5 [ 93.830125] [<ffffffff814ea533>] common_interrupt+0x73/0x73 [ 93.830125] <EOI> [<ffffffff8108b825>] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [<ffffffff812bb6d5>] ? intel_idle+0xe5/0x10c [ 93.830125] [<ffffffff812bb6d1>] ? intel_idle+0xe1/0x10c [ 93.830125] [<ffffffff813f8d5e>] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [<ffffffff8100e2ef>] cpu_idle+0xab/0x101 [ 93.830125] [<ffffffff814c6373>] rest_init+0xd7/0xde [ 93.830125] [<ffffffff814c629c>] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [<ffffffff81d4bbb0>] start_kernel+0x3dd/0x3ea [ 93.830125] [<ffffffff81d4b2c4>] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [<ffffffff81d4b140>] ? early_idt_handlers+0x140/0x140 [ 93.830125] [<ffffffff81d4b3ca>] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt <pstadt@sourcentral.org> Cc: stable@vger.kernel.org Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-27jme: PHY configuration for compatible issueAries Lee
To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee <AriesLee@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27ath9k: Revert change that broke AR928X on Acer Ferrari OneRafael J. Wysocki
Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f232 ("ath9k_hw: Add support for AR946/8x chipsets") that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-26dm9000: Fix check for disabled wake on LANMark Brown
We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26net: Revert ARCNET and PHYLIB to tristate optionsBen Hutchings
commit 88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig & Makefile cleanup") changed the type of these options to bool, but they select code that could (and still can) be built as modules. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23ehea: Use round_jiffies_relative to align workqueueAnton Blanchard
Use round_jiffies_relative to align the ehea workqueue and avoid extra wakeups. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23ehea: Reduce memory usage in buffer poolsAnton Blanchard
Now that we enable multiqueue by default the ehea driver is using quite a lot of memory for its buffer pools. With 4 queues we consume 64MB in the jumbo packet ring, 16MB in the medium packet ring and 16MB in the tiny packet ring. We should only fill the jumbo ring once the MTU is increased but for now halve it's size so it consumes 32MB. Also reduce the tiny packet ring, with 4 queues we had 16k entries which is overkill. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23qlge: fix size of external list for TX address descriptorsThadeu Lima de Souza Cascardo
When transmiting a fragmented skb, qlge fills a descriptor with the fragment addresses, after DMA-mapping them. If there are more than eight fragments, it will use the eighth descriptor as a pointer to an external list. After mapping this external list, called OAL to a structure containing more descriptors, it fills it with the extra fragments. However, considering that systems with pages larger than 8KiB would have less than 8 fragments, which was true before commit a715dea3c8e, it defined a macro for the OAL size as 0 in those cases. Now, if a skb with more than 8 fragments (counting skb->data as one fragment), this would start overwriting the list of addresses already mapped and would make the driver fail to properly unmap the right addresses on architectures with pages larger than 8KiB. Besides that, the list of mappings was one size too small, since it must have a mapping for the maxinum number of skb fragments plus one for skb->data and another for the OAL. So, even on architectures with page sizes 4KiB and 8KiB, a skb with the maximum number of fragments would make the driver overwrite its counter for the number of mappings, which, again, would make it fail to unmap the mapped DMA addresses. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23bnx2x: Fix 5461x LEDYaniv Rosner
Fix port identify test on 5461x PHY by driving LEDs through MDIO. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23b44: Use dev_kfree_skb_irq() in b44_tx()Xander Hover
Reported issues when using dev_kfree_skb() on UP systems and systems with low numbers of cores. dev_kfree_skb_irq() will properly save IRQ state before freeing the skb. Tested on 3.1.1 and 3.2_rc2 Example of reproducible trace of kernel 3.1.1 ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79() ... Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1 Call Trace: [<c1022970>] warn_slowpath_common+0x65/0x7a [<c102699e>] ? local_bh_enable+0x32/0x79 [<c1022994>] warn_slowpath_null+0xf/0x13 [<c102699e>] local_bh_enable+0x32/0x79 [<c134bfd8>] destroy_conntrack+0x7c/0x9b [<c134890b>] nf_conntrack_destroy+0x1f/0x26 [<c132e3a6>] skb_release_head_state+0x74/0x83 [<c132e286>] __kfree_skb+0xb/0x6b [<c132e30a>] consume_skb+0x24/0x26 [<c127c925>] b44_poll+0xaa/0x449 [<c1333ca1>] net_rx_action+0x3f/0xea [<c1026a44>] __do_softirq+0x5f/0xd5 [<c10269e5>] ? local_bh_enable+0x79/0x79 <IRQ> [<c1026c32>] ? irq_exit+0x34/0x8d [<c1003628>] ? do_IRQ+0x74/0x87 [<c13f5329>] ? common_interrupt+0x29/0x30 [<c1006e18>] ? default_idle+0x29/0x3e [<c10015a7>] ? cpu_idle+0x2f/0x5d [<c13e91c5>] ? rest_init+0x79/0x7b [<c15c66a9>] ? start_kernel+0x297/0x29c [<c15c60b0>] ? i386_start_kernel+0xb0/0xb7 ---[ end trace 583f33bb1aa207a9 ]--- Signed-off-by: Xander Hover <LKML@hover.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-22Revert "rt2800pci: handle spurious interrupts"John W. Linville
This reverts commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Revert "rt2x00: handle spurious pci interrupts"John W. Linville
This reverts commit 23085d5796561625db4143a671f1de081f66ef08. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21net, sja1000: Don't include version.h in peak_pci.c when not neededJesper Juhl
It was pointed out by "make versioncheck" that we do not need to include version.h in drivers/net/can/sja1000/peak_pci.c This patch removes the unneeded include. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21stmmac: mask mmc interruptsGiuseppe CAVALLARO
We need to mask the MMC irq otherwise if we raise the mmc interrupts that are not handled the driver loops in the handler. In fact, by default all mmc counters (only used for stats) are managed in SW and registers are cleared on each READ. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21iseries_veth: Fix wrong parameter given to sizeof callThomas Jarosch
"remote_list" is of type struct dma_chunk remote_list[VETH_MAX_FRAMES_PER_MSG]; Probably a copy'n'paste error. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21prism54: potential memory corruption in prism54_get_essid()Dan Carpenter
"dwrq->length" is the capped version of "essid->length". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17sky2: fix hang in napi_disablestephen hemminger
If IRQ was never initialized, then calling napi_disable() would hang. Add more bookkeeping to track whether IRQ was ever initialized. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17sky2: enforce minimum ring sizestephen hemminger
The hardware has a restriction that the minimum ring size possible is 128. The number of elements used is controlled by tx_pending and the overall number of elements in the ring tx_ring_size, therefore it is okay to limit the number of elements in use to a small value (63) but still provide a bigger ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17bonding: Don't allow mode change via sysfs with slaves presentVeaceslav Falico
When changing mode via bonding's sysfs, the slaves are not initialized correctly. Forbid to change modes with slaves present to ensure that every slave is initialized correctly via bond_enslave(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17p54spi: Fix workqueue deadlockMichael Büsch
priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17p54spi: Add missing spin_lock_initMichael Büsch
The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde
Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> CC: <stable@vger.kernel.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: handle spurious pci interruptsStanislaw Gruszka
We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2800pci: handle spurious interruptsStanislaw Gruszka
Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] <IRQ> [<ffffffff810a6e2b>] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [<ffffffff810a6f93>] note_interrupt+0x11a/0x17f [ 2052.114352] [<ffffffff810a7a73>] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [<ffffffff8100c2ea>] handle_irq+0x88/0x90 [ 2052.114357] [<ffffffff8146f034>] do_IRQ+0x5c/0xb4 [ 2052.114360] [<ffffffff81469593>] ret_from_intr+0x0/0x11 [ 2052.114361] <EOI> [<ffffffff8102b7f9>] ? native_safe_halt+0xb/0xd [ 2052.114366] [<ffffffff81010f03>] ? need_resched+0x23/0x2d [ 2052.114367] [<ffffffff8101102a>] default_idle+0x34/0x4f [ 2052.114370] [<ffffffff81008325>] cpu_idle+0xaa/0xcc [ 2052.114373] [<ffffffff81461f2a>] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [<ffffffff81332944>] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [<ffffffffa00697da>] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-17stmmac: fix pm functions avoiding sleep on spinlockFrancesco Virlinzi
This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 21:25:06 +0000