summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-08-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/ethernet/broadcom/Kconfig
2013-08-12mwifiex: fix build error when CONFIG_PM is not setBing Zhao
config: make ARCH=m68k allmodconfig All error/warnings: drivers/net/wireless/mwifiex/cfg80211.c: In function 'mwifiex_fill_coalesce_rule_info': >> drivers/net/wireless/mwifiex/cfg80211.c:2493:3: error: implicit declaration of function 'mwifiex_is_pattern_supported' [-Werror=implicit-function-declaration] drivers/net/wireless/mwifiex/cfg80211.c: At top level: drivers/net/wireless/mwifiex/cfg80211.c:2537:12: warning: 'mwifiex_cfg80211_set_coalesce' defined but not used [-Wunused-function] cc1: some warnings being treated as errors Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-11net: Add MOXA ART SoCs ethernet driverJonas Jensen
The MOXA UC-711X hardware(s) has an ethernet controller that seem to be developed internally. The IC used is "RTL8201CP". Since there is no public documentation, this driver is mostly the one published by MOXA that has been heavily cleaned up / ported from linux 2.6.9. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10net: attempt high order allocations in sock_alloc_send_pskb()Eric Dumazet
Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09pptp: fix sparse pointer warningstephen hemminger
callid_sock array is referenced via rcu_dereference and sparse rcu checks complains about address space mismatch. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09tg3: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09netxen: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09myri10ge: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Andrew Gallatin <gallatin@myri.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09bnx2x: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: netdev@vger.kernel.org Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09bnx2: clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: via-rhine: Fix incorrect placement of __initdataSachin Kamat
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: wan: sbni: Fix incorrect placement of __initdataSachin Kamat
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09ath9k: Run the LNA combining algorithm properlySujith Manoharan
The LNA combining algorithm has to be run for cards that support the required diversity features, make sure that that correct conditions are met before enabing this algorithm. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix BTCOEX usage for RX diversitySujith Manoharan
BTCOEX has to be *disabled* for WLAN RX diversity to work on combo cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: use software queueing for multicast trafficFelix Fietkau
Create a per-vif dummy node entry for keeping the multicast software queues. This helps in setups with a lot of mulitcast traffic that could otherwise potentially drown out unicast traffic to stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: improve tx scheduling fairnessFelix Fietkau
Instead of trying to schedule the same TID multiple times in a loop, iterate over other TIDs/stations first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: use software queues for un-aggregated data packetsFelix Fietkau
This is a first step for improving fairness between legacy and 802.11n traffic, and it should also improve reliability of resets and channel changes by keeping the hardware queue depth very short. When an aggregation session is torn down, all packets in the retry queue will be removed from the BAW and freed. For all subframes that have not been transmitted yet, the A-MPDU flag will be cleared, and a sequence number allocated. This ensures that the next A-MPDU session will get the correct initial sequence number. This happens both on aggregation session start and stop. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: always clear ps filter bit on new assocFelix Fietkau
Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: fix clearing expired A-MPDU subframes in tx completionFelix Fietkau
When the tid aggregation state has been marked as inactive, free completed tx packets immediately. When a new aggregation session has not been initialized yet, the BAW checks do not recognize it as expired. Might fix potential stalls in setting up a new aggregation session. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: prepare queueing code for handling unaggregated trafficFelix Fietkau
- Allow ath_tx_get_tid_subframe to return non-AMPDU subframes. - Reset the tid paused state on aggregation stop - Initialize software queues even when HT is not supported Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: fix block ack window tracking checkFelix Fietkau
When a packet has been tracked as part of the BlockAck window and added to the hardware queue, it can end up back in the TID queue again with fi->retries still set to 0 (e.g. if the frame was filtered). Keep an extra bit for the BAW tracking status to fix this corner case. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: simplify ath_tx_form_aggrFelix Fietkau
The check for ATH_AMPDU_SUBFRAME_DEFAULT is unnecessary, since it's set to half the maximum BlockAck Window size, which is already the maximum value that h_baw could possibly have. Also remove unnecessary variables. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add CAB queue info to debugfsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add function for getting the tx tid for a packetFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: split tid retry packets into a separate queueFelix Fietkau
Improves packet retry order and helps with further tx queueing improvements. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add utility functions for accessing tid queuesFelix Fietkau
Useful for further fixes / cleanups Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09brcmfmac: use CFG80211_TESTMODE_CMDJohannes Berg
This is essentially the same, but written shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09net: wireless: rt2x00: Staticize rt2x00queue_pause_queue_nocheck()Jingoo Han
rt2x00queue_pause_queue_nocheck()is used only in this file. Fix the following sparse warning: drivers/net/wireless/rt2x00/rt2x00queue.c:939:6: warning: symbol 'rt2x00queue_pause_queue_nocheck' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix build failureSujith Manoharan
Make sure that CONFIG_ATH9K_BTCOEX_SUPPORT is used for the WLAN/BT RX diversity hooks. Reported by the kernel build testing backend. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: add packet coalesce supportAmitkumar Karwar
Coalesce filters are configured in firmware based on settings received from cfg80211. Packet type which is required by firmware is determined based on provided patterns in a rule: Unicast: if pattern '01' with offset 0 is found Multicast: if pattern '33:33' or '01:00:5e' with offset 0 is found Broadcast: if pattern 'ff:ff:ff:ff' with offset 0 is found Some example coalesce configuration files: 1) Coalesce Rx data packets from 192.168.0.88 mac address of our device is 00:50:43:21:53:7A Source IP address offset comes out as 52 after following calculations: 32 bytes of HW 802.11 header + 8 bytes LLC + 12 bytes in IPV4 header till source IP address Destination mac is at offset 6 in HW header. delay=100 condition=1 patterns=01,6+00:50:43:22,10+53:7A,52+c0:a8:00:58 2) Coalesce all broadcast and multicast packets(Multiple packet types are not allowed in a single rule. Hence created separate rules) delay=400 condition=1 patterns=33:33 delay=400 condition=1 patterns=ff:ff:ff:ff Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: increase max supported pattern offsetAmitkumar Karwar
The offset number is increased to accomodate requests from user to match more fields in a Rx packet. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: modify mwifiex_is_pattern_supported() routineAmitkumar Karwar
It is modified so that it can be reused for coalesce feature. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: rename mef macrosAmitkumar Karwar
Their names were generic. We need to define similar macros for coalesce feature. Hence they are renamed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-08bonding: unwind on bond_add_vlan failurenikolay@redhat.com
In case of bond_add_vlan() failure currently we'll have the vlan's refcnt bumped up in all slaves, but it will never go down because it failed to get added to the bond, so properly unwind the added vlan if bond_add_vlan fails. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08bonding: change the bond's vlan syncing functions with the standard onesnikolay@redhat.com
Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07net: phy: mdio: add missing __iomem annotationJingoo Han
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/net/phy/mdio-mux-mmioreg.c:51:27: warning: incorrect type in initializer (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:51:27: expected void *p drivers/net/phy/mdio-mux-mmioreg.c:51:27: got void [noderef] <asn:2>* drivers/net/phy/mdio-mux-mmioreg.c:57:21: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:57:21: expected void const volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:57:21: got void *p drivers/net/phy/mdio-mux-mmioreg.c:60:25: warning: incorrect type in argument 2 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:60:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:60:25: got void *p drivers/net/phy/mdio-mux-mmioreg.c:64:25: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:64:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:64:25: got void *p Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07net: phy: micrel: Staticize ksz8873mll_read_status()Jingoo Han
ksz8873mll_read_status() is used only in this file. Fix the following sparse warning: drivers/net/phy/micrel.c:147:5: warning: symbol 'ksz8873mll_read_status' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07net: move zerocopy_sg_from_iovec() to net/core/datagram.cJason Wang
To let it be reused and reduce code duplication. Also document this function. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07net: move iov_pages() to net/core/iovec.cJason Wang
To let it be reused and reduce code duplication. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Update version to 2.2.4Michael Chan
and update copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Add pci shutdown handler.Michael Chan
WoL and power state changes will now be done in the shutdown handler. open/close/ethtool will no longer change the power state. NVRAM operations can now be permitted whether the device is up or down. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use SIMPLE_DEV_PM_OPS.Michael Chan
This simplifies the suspend/resume code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Refactor WoL setup into a separate function.Michael Chan
Separate MAC and PHY WoL setup code into a separate function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use kernel APIs for WoL and power state changes.Michael Chan
Simple API changes with no functional changes. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Handle error condition in ->slot_reset()Michael Chan
by closing the device if necessary. Otherwise, since NAPI state is already disabled, a subsequent close will hang the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: update driver versionSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Initialize "status" in be_cmd_get_die_temperature()Vasundhara Volam
Uninitialized value was being returned in the non-failure case. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: fixup log msgs for async eventsVasundhara Volam
Log the event type for unknown async events Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-23 18:26:51 +0000