summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-07-18pppoe: Must flush connections when MAC address changes too.David S. Miller
Kernel bugzilla: 39252 Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18tulip: dmfe: Remove old log spamming pr_debugsJoe Perches
Commit 726b65ad444d ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef1679 ("tulip/dmfe.c: Use dev_<level> and pr_<level>"). Remove these pr_debugs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-15gianfar: rx parserSebastian Pöhn
Only let the rx parser be enabled if it is necessary (if VLAN extraction, IP or TCP checksumming or the rx queue filer are enabled). Otherwise disable it. The new routine gfar_check_rx_parser_mode should be run after every change on this features and will enable/disable the parser as necessary. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-15r6040: only disable RX interrupt if napi_schedule_prep is successfulMichael Thalmeier
When receiving the first RX interrupt before the internal call to napi_schedule_prep is successful the RX interrupt gets disabled and is never enabled again as the poll function never gets executed. Signed-off-by: Michael Thalmeier <Michael.Thalmeier@sigmatek.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: remove NETIF_F_ALL_TX_OFFLOADSMichał Mirosław
There is no software fallback implemented for SCTP or FCoE checksumming, and so it should not be passed on by software devices like bridge or bonding. For VLAN devices, this is different. First, the driver for underlying device should be prepared to get offloaded packets even when the feature is disabled (especially if it advertises it in vlan_features). Second, devices under VLANs do not get replaced without tearing down the VLAN first. This fixes a mess I accidentally introduced while converting bonding to ndo_fix_features. NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they are unused as of commit 712ae51afd. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) slip: fix wrong SLIP6 ifdef-endif placing natsemi: fix another dma-debug report sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket net: Fix default in docs for tcp_orphan_retries. hso: fix a use after free condition net/natsemi: Fix module parameter permissions XFRM: Fix memory leak in xfrm_state_update sctp: Enforce retransmission limit during shutdown mac80211: fix TKIP replay vulnerability mac80211: fix ie memory allocation for scheduled scans ssb: fix init regression of hostmode PCI core rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M ath9k: Fix tx throughput drops for AR9003 chips with AES encryption carl9170: add NEC WL300NU-AG usbid cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex ath5k: fix incorrect use of drvdata in PCI suspend/resume code ath5k: fix incorrect use of drvdata in sysfs code Bluetooth: Fix memory leak under page timeouts Bluetooth: Fix regression with incoming L2CAP connections Bluetooth: Fix hidp disconnect deadlocks and lost wakeup ...
2011-07-11slip: fix wrong SLIP6 ifdef-endif placingMatvejchikov Ilya
SLIP6 have nothing to do with CSLIP so placing a block of SLIP6-related code within a CSLIP ifdef-endif block is incorrect. Signed-off-by: Ilya Matvejchikov <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-10natsemi: fix another dma-debug reportJim Cromie
commit 2fb83cd618be34546fb526a9051eceaa95517026 Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Sun Jul 3 22:34:29 2011 -0700 Above commit fixed previously reported warning, but I later noticed another one at shutdown. This commit fixes it. ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56c() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000007356840] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: bridge stp llc x_tables ipv6 pc87360 hwmon_vid scx200_hrt pc8736x_gpio scx200_gpio nsc_gpio scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr scx200 rfkill ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core [last unloaded: ebtables] Pid: 3996, comm: ifconfig Not tainted 3.0.0-rc6-skc-dyndbg+ #104 Call Trace: [<c011ca97>] warn_slowpath_common+0x4a/0x5f [<c0261ca5>] ? check_unmap+0x1fe/0x56c [<c011cb10>] warn_slowpath_fmt+0x26/0x2a [<c0261ca5>] check_unmap+0x1fe/0x56c [<c0116505>] ? check_preempt_curr+0x5a/0x6a [<c0262186>] debug_dma_unmap_page+0x53/0x5b [<c02aaaf9>] pci_unmap_single+0x4d/0x57 [<c02aab51>] drain_rx+0x4e/0x74 [<c02acc6e>] netdev_close+0x103/0x1b8 [<c02f097e>] ? spin_unlock_bh.clone.30+0x12/0x14 [<c02f10aa>] ? dev_deactivate_many+0xc1/0xef [<c02e05e9>] __dev_close_many+0x69/0x86 [<c02e0625>] __dev_close+0x1f/0x2c [<c02e3200>] __dev_change_flags+0x92/0x107 [<c02e32db>] dev_change_flags+0x13/0x3f [<c031e7ea>] devinet_ioctl+0x248/0x4b3 [<c02e3a9e>] ? dev_ioctl+0x50a/0x54c [<c031f509>] inet_ioctl+0x8e/0xa7 [<c02d506f>] sock_ioctl+0x1b6/0x1da [<c02d4eb9>] ? sock_fasync+0x61/0x61 [<c0183db4>] do_vfs_ioctl+0x44d/0x47f [<c0113cdb>] ? do_page_fault+0x268/0x299 [<c01339d0>] ? __put_cred+0x34/0x36 [<c0177d83>] ? sys_faccessat+0x13e/0x14b [<c0183e14>] sys_ioctl+0x2e/0x4a [<c035bc95>] syscall_call+0x7/0xb ---[ end trace 7013a1bdac403e56 ]--- Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-07-08hso: fix a use after free conditionGreg KH
This needs to go to netdev: From: Octavian Purdila <octavian.purdila@intel.com> In hso_free_net_device hso_net pointer is freed and then used to cleanup urb pools. Catched with SLAB_DEBUG during S3 resume: [ 95.824442] Pid: 389, comm: khubd Tainted: G C 2.6.36greenridge-01400-g423cf13-dirty #154 Type2 - Board Product Name1/OakTrail [ 95.824442] EIP: 0060:[<c1151551>] EFLAGS: 00010202 CPU: 0 [ 95.824442] EIP is at kref_put+0x29/0x42 [ 95.824442] EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: c2806b40 EDX: 00000037 [ 95.824442] ESI: c1258d56 EDI: edd3d128 EBP: ee8cde0c ESP: ee8cde04 [ 95.824442] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 95.824442] Process khubd (pid: 389, ti=ee8cc000 task=ee95ed10 task.ti=ee8cc000) [ 95.824442] Stack: [ 95.824442] edd07020 00000000 ee8cde14 c1258b77 ee8cde38 ef933a44 ef93572b ef935dec [ 95.824442] <0> 0000099a 6b6b6b6b 00000000 ee2da748 edd3e0c0 ee8cde54 ef933b9f ee3b53f8 [ 95.824442] <0> 00000002 ee2da748 ee2da764 ef936658 ee8cde60 ef933d0c ee2da748 ee8cde84 [ 95.824442] Call Trace: [ 95.824442] [<c1258b77>] ? usb_free_urb+0x11/0x13 [ 95.824442] [<ef933a44>] ? hso_free_net_device+0x81/0xd8 [hso] [ 95.824442] [<ef933b9f>] ? hso_free_interface+0x104/0x111 [hso] [ 95.824442] [<ef933d0c>] ? hso_disconnect+0xb/0x18 [hso] [ 95.824442] [<c125b7f1>] ? usb_unbind_interface+0x44/0x14a [ 95.824442] [<c11e56e8>] ? __device_release_driver+0x6f/0xb1 [ 95.824442] [<c11e57c7>] ? device_release_driver+0x18/0x23 [ 95.824442] [<c11e4e92>] ? bus_remove_device+0x8a/0xa1 [ 95.824442] [<c11e3970>] ? device_del+0x129/0x163 [ 95.824442] [<c11e2dc0>] ? put_device+0xf/0x11 [ 95.824442] [<c11e39bc>] ? device_unregister+0x12/0x15 [ 95.824442] [<c125915f>] ? usb_disable_device+0x90/0xf0 [ 95.824442] [<c125544f>] ? usb_disconnect+0x6d/0xf8 [ 95.824442] [<c1255f91>] ? hub_thread+0x3fc/0xc57 [ 95.824442] [<c1048526>] ? autoremove_wake_function+0x0/0x2f [ 95.824442] [<c102529d>] ? complete+0x34/0x3e [ 95.824442] [<c1255b95>] ? hub_thread+0x0/0xc57 [ 95.824442] [<c10481fc>] ? kthread+0x63/0x68 [ 95.824442] [<c1048199>] ? kthread+0x0/0x68 [ 95.824442] [<c1002d76>] ? kernel_thread_helper+0x6/0x10 Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08net/natsemi: Fix module parameter permissionsJean Delvare
The third parameter of module_param is supposed to represent sysfs file permissions. A value of "1" leads to the following: $ ls -l /sys/module/natsemi/parameters/ total 0 ---------x 1 root root 4096 Jul 8 09:46 dspcfg_workaround I am changing it to "0" to align with the other module parameters in this driver. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
2011-07-07vmxnet3: round down # of queues to power of twoShreyas Bhatewara
vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: Yong Wang <yongwang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-05net: sh_eth: fix the parameter for the ETHER of SH7757Yoshihiro Shimoda
If the driver didn't set this parameter on the ETHER, the CPU will encounter the "data address error" exception. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: sh_eth: fix cannot work half-duplex modeYoshihiro Shimoda
When link was down, the bit of DM in ECMR was always set. So, we could not use half-duplex mode on the controller. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05vmxnet3: fix starving rx ring whenoc_skb kb failsShreyas Bhatewara
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000MYoann DI-RUZZA
Signed-off-by: Yoann DI-RUZZA <y.diruzza@lim.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ath9k: Fix tx throughput drops for AR9003 chips with AES encryptionRajkumar Manoharan
While sending aggregated frames in AES, the AR5416 chips required additional padding b/w subframes. This workaround is not needed for edma (AR9003 family) chips. With this patch ~4Mbps thoughput improvement was observed in clear environment. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: add NEC WL300NU-AG usbidChristian Lamparter
Cc: stable@kernel.org Reported-by: Mark Davis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ath5k: fix incorrect use of drvdata in PCI suspend/resume codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ath5k: fix incorrect use of drvdata in sysfs codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-04greth: greth_set_mac_add would corrupt the MAC address.Kristoffer Glembo
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-03natsemi: silence dma-debug warningsFUJITA Tomonori
This silences dma-debug warnings: https://lkml.org/lkml/2011/6/30/341 ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56a() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000006ef0040] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1 Call Trace: [<c011a556>] warn_slowpath_common+0x4a/0x5f [<c02565cb>] ? check_unmap+0x1fe/0x56a [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a [<c02565cb>] check_unmap+0x1fe/0x56a [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b [<c029d6cd>] pci_unmap_single+0x4d/0x57 [<c029ea0a>] natsemi_poll+0x343/0x5ca [<c0116f41>] ? try_to_wake_up+0xea/0xfc [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23 [<c02d4667>] net_rx_action+0x3f/0xe5 [<c011e35e>] __do_softirq+0x5b/0xd1 [<c011e303>] ? local_bh_enable+0xa/0xa <IRQ> [<c011e54b>] ? irq_exit+0x34/0x75 [<c01034b9>] ? do_IRQ+0x66/0x79 [<c034e869>] ? common_interrupt+0x29/0x30 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72 [<c034cb92>] ? schedule+0x3b2/0x3f1 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4 [<c012ed27>] ? update_rmtp+0x68/0x68 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b051>] ? do_select+0x488/0x4cd [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72 [<c01157ad>] ? need_resched+0x14/0x1e [<c017a99e>] ? poll_freewait+0x74/0x74 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cbc1>] ? schedule+0x3e1/0x3f1 [<c011e55e>] ? irq_exit+0x47/0x75 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024bc12>] ? put_dec_full+0x7b/0xaa [<c0240060>] ? blkdev_ioctl+0x434/0x618 [<c024bc70>] ? put_dec+0x2f/0x6d [<c024c6a5>] ? number.clone.1+0x10b/0x1d0 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024d046>] ? vsnprintf+0x225/0x264 [<c024cea0>] ? vsnprintf+0x7f/0x264 [<c018346f>] ? seq_printf+0x22/0x40 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b1b5>] ? core_sys_select+0x11f/0x1a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c01a34a1>] ? proc_tgid_stat+0xd/0xf [<c012357c>] ? recalc_sigpending+0x32/0x35 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a [<c011dfb0>] ? timespec_add_safe+0x24/0x48 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e [<c034dd65>] ? syscall_call+0x7/0xb [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30 ---[ end trace 180dcac41a50938b ]--- Reported-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-03net: 8139too: Initial necessary vlan_features to support vlanShan Wei
Offload setting of vlan device requires vlan_features to be initialized. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01Fix call trace when interrupts are disabled while sleeping function kzalloc ↵Shyam Iyer
is called request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below. Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2) Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144 Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847 Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6 Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace: Jun 27 08:15:24 home-t710 kernel: [11735.638755] [<ffffffff81046427>] __might_sleep+0xeb/0xf0 Jun 27 08:15:24 home-t710 kernel: [11735.638766] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638773] [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8 Jun 27 08:15:24 home-t710 kernel: [11735.638782] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638787] [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113 Jun 27 08:15:24 home-t710 kernel: [11735.638798] [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638807] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638816] [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19 Jun 27 08:15:24 home-t710 kernel: [11735.638822] [<ffffffff8124d17a>] local_pci_probe+0x44/0x75 Jun 27 08:15:24 home-t710 kernel: [11735.638826] [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff Jun 27 08:15:24 home-t710 kernel: [11735.638832] [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638836] [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e Jun 27 08:15:24 home-t710 kernel: [11735.638840] [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638844] [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89 Jun 27 08:15:24 home-t710 kernel: [11735.638848] [<ffffffff812ef48a>] driver_attach+0x1e/0x20 Jun 27 08:15:24 home-t710 kernel: [11735.638852] [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224 Jun 27 08:15:24 home-t710 kernel: [11735.638858] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638862] [<ffffffff812efe57>] driver_register+0x98/0x105 Jun 27 08:15:24 home-t710 kernel: [11735.638866] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638871] [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1 Jun 27 08:15:24 home-t710 kernel: [11735.638875] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638884] [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638892] [<ffffffff81002099>] do_one_initcall+0x7f/0x136 Jun 27 08:15:24 home-t710 kernel: [11735.638899] [<ffffffff8108608b>] sys_init_module+0x88/0x1d0 Jun 27 08:15:24 home-t710 kernel: [11735.638906] [<ffffffff81489682>] system_call_fastpath+0x16/0x1b Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3) Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144 Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01qlge:Version change to v1.00.00.29Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01qlge: Fix printk priority so chip fatal errors are always reported.Jitendra Kalsaria
Precedence of the printk should be at higher level so chip fatal errors are always reported. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01qlge:Fix crash caused by mailbox execution on wedged chip.Jitendra Kalsaria
When we are in a recover process from a chip fatal error, driver should skip over execution of mailbox commands during resetting chip. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-016pack,mkiss: fix lock inconsistencyArnd Bergmann
Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP <f6bvp@free.fr> Tested-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
2011-06-29ath5k: fix memory leak when fewer than N_PD_CURVES are in useEugene A. Shatokhin
We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k: Fix suspend/resume when no interface is UPRajkumar Manoharan
When no interface has been brought up, the chip's power state continued as AWAKE. So during resume, the chip never been powered up. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29usbnet: Remove over-broad module alias from zaurus.Dave Jones
This module and a bunch of dependancies are getting loaded on several of laptops I have (probably picking up the mobile broadband device), that have nothing to do with zaurus. Matching by class without any vendor/device pair isn't the right thing to do here, as it will prevent any other driver from correctly binding to it. (Or in the absense of a driver, will just waste time & memory by unnecessarily loading modules) Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net/can: activate bit-timing calculation and netlink based drivers by defaultMarc Kleine-Budde
The two options "CAN bit-timing calculation" and "Platform CAN drivers with Netlink support" have a "default Y". In order to activate them by default, change to "default y". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29rionet: fix NULL pointer dereference in rionet_removeYinglin Luan
Function rionet_remove initializes local variable 'ndev' to NULL and do nothing changes before the call to unregister_netdev(ndev), this could cause a NULL pointer dereference. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Yinglin Luan <synmyth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net+crypto: Use vmalloc for zlib inflate buffers.David S. Miller
They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: Martin Jackson <mjackson220.list@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: fix *_UCODE_API_MAX output in the firmware fieldEvgeni Golov
Currently (3.0-rc2), modinfo iwlagn shows: firmware: iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode firmware: iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode firmware: iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode firmware: iwlwifi-100-IWL100_UCODE_API_MAX.ucode firmware: iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode firmware: iwlwifi-105-IWL105_UCODE_API_MAX.ucode firmware: iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode firmware: iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode which is obviously wrong, the user should not see the *_UCODE_API_MAX macros but the actual ucode API versions here. The problem are the #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode" which do not expand api correctly (because this is a macro itself). Fixed by using __stringify() from linux/stringify.h. Further information about macro stringification can be found here: http://gcc.gnu.org/onlinedocs/cpp/Stringification.html Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27Merge branch 'wireless-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-06-27iwlagn: map command buffers BIDIJohannes Berg
Evidently, the device sometimes wants to write back to command buffers, even if I see no reason why it should. Allow it to do that. Tested-by: Andy Lutomirski <luto@mit.edu> Tested-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-27iwlagn: fix cmd queue unmapJohannes Berg
When we stop the device while a command is in flight that uses multiple TBs, we can leak the DMA buffers for the second and higher TBs. Fix this by using iwlagn_unmap_tfd() as we do when we normally recover the entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24cxgb3: skb_record_rx_queue now records the queue index relative to the ↵John (Jay) Hernandez
net_device. Fixed call to skb_record_rx_queue where we were passing the queue index relative to the adapter when it should have been relative to the net_device. Signed-off-by: John (Jay) Hernandez <jay@chelsio.com> Signed-off-by: Divy Le Ray <divy@chelsio.com> Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24Merge branch 'davem.r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-06-24iwlagn: fix change_interface for P2P typesJohannes Berg
When an interface changes type to a P2P type, iwlagn will erroneously set vif->type to the P2P type and not the reduced/split type. Fix this by keeping "newtype" in another variable for the assignment to vif->type. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24iwlagn: Fix a bug introduced by the HUGE command removalEmmanuel Grumbach
Since we don't have HUGE command any more, there is no point in adding 1 to the num of slots in the command queue. Doing so is buggy and might corrupt memory. Bug introduced by 4ce7cc2b09553a91d4aea014c39674685715173a iwlagn: support multiple TBs per command Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
2011-06-24r8169: fix wrong register use.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-06-23net/usb/kalmia: signedness bug in kalmia_bind()Dan Carpenter
"status" should be an int here for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22net/usb: kalmia: Various fixes for better support of non-x86 architectures.Marius B. Kotsbak
-Support for big endian. -Do not use USB buffers at the stack. -Safer/more efficient code for local constants. Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-27 09:43:51 +0000