summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (52 commits) Blackfin: encode cpu-rev into uImage name Blackfin: bf54x: don't ack GPIO ints when unmasking them Blackfin: sram_free_with_lsl: do not ignore return value of sram_free Blackfin: boards: add missing "static" to peripheral lists Blackfin: DNP5370: new board port Blackfin: bf518f-ezbrd: fix dsa resources Blackfin: move "-m elf32bfin" to general LDFLAGS Blackfin: kgdb_test: make sure to initialize num2 Blackfin: kgdb: disable preempt schedule when running single step in kgdb Blackfin: kgdb: disable interrupt when single stepping in ADEOS Blackfin: SMP: kgdb: apply anomaly 257 work around Blackfin: fix building IPIPE code when XIP is enabled Blackfin: SMP: kgdb: flush core internal write buffer before flushinv Blackfin: sport_uart resources: remove unused secondary RX/TX pins Blackfin: tll6527m: fix spelling in unused code (struct name) Blackfin: bf527-ezkit: add adau1373 chip address Blackfin: no-mpu: fix masking of small uncached dma region Blackfin: pm: drop irq save/restore in standby and suspend to mem callback MAINTAINERS: update Analog Devices support info Blackfin: dpmc.h: pull in new pll.h ...
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2011-01-10headers: kobject.h reduxAlexey Dobriyan
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10net/irda: bfin_sir: back out transitional definesMike Frysinger
Now that the common header is sane, we can drop the transitional cruft. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10net/irda: bfin_sir: pull in serial headers for definesMike Frysinger
We're in the process of cleaning up the global Blackfin namespace, so the bfin_sir driver needs to pull in the serial header explicitly now. This does add a little transitional cruft to keep things compiling, but a follow up patch in this series will cull that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2011-01-07Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-06Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-06cassini: Use local-mac-address prom property for Cassini MAC addressRichard Mortimer
Fallback on the local-mac-address prom property if the Cassini device does not have an address programmed in the VPD ROM. This uses the same technique as implemented by the sungem driver. The problem was reported by Frans van Berckel using Debian kernel 2.6.34-7 on Sun Fire V440. udev was assigning a new eth<n> device name on each reboot because the cassini driver was using a random MAC address. Fix tested on 2.6.34-7 and 2.6.37 Sun Fire V440. Compile tested against 2.6.36 davem/sparc-2.6.git Reported-by: Frans van Berckel <fberckel@xs4all.nl> Tested-by: Frans van Berckel <fberckel@xs4all.nl> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06netconsole: clarify stopping messageFerenc Wagner
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06netconsole: don't announce stopping if nothing happenedFerenc Wagner
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06cnic: Fix the type field in SPQ messagesMichael Chan
The new firmware interface requires each Slow Path Queue (SPQ) message's type field to include the function number. The existing code does not do this consistently. We fix this by OR'ing in the function number into the type field centrally in cnic_submit_kwqe_16(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06net: r6040: Return proper error for r6040_init_oneAxel Lin
Return -ENOMEM instead of 0 for the case of mdiobus_alloc and kmalloc failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06net: ixp4xx_eth: Return proper error for eth_init_oneAxel Lin
Return PTR_ERR(port->phydev) instead of 1 if phy_connect failed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: net/bluetooth/Makefile
2011-01-05ath9k: correct MODULE_PARM_DESC parameters for force_new_aniJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-05ath5k: qualify global modparam_nohwcrypt variableJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-05ath9k: qualify global modparam_nohwcrypt variableJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-01-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-04libertas: down_interruptible() can return -EINTR, not EINTRroel kluin
Fix test in lbs_spi_thread(). down_interruptible() can return -EINTR, but not EINTR. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Fix packet injectionSujith Manoharan
To inject a packet in monitor mode, a dummy station has to be associated with the monitor interface in the target. Failing to do this would result in a firmware crash on the device. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath5k: ath5k_eeprom_mode_from_channel() returns signedDan Carpenter
ath5k_eeprom_mode_from_channel() returns -1 on error but we're storing the result in "ee_mode" which is an unsigned char. This breaks the error handling. This patch makes "ee_mode" an int. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k : few rate control clean upsMohammed Shafi Shajakhan
Remove some obvious looking dead code and rename few functions Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k: fix beacon restart on channel changeRajkumar Manoharan
Restart the beacon timers only if the beacon was already configured. Otherwise beacons timers are restarted unnecessarily in unassociated state too. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04Revert "ath9k: Parse DTIM period from mac80211"Mohammed Shafi Shajakhan
This reverts commit 0ce3bcfc84900a64347b0fe1140229bd81314008. Event though with the above commit we obtain the configured DTIM period from the AP rather than always hardcoding it to '1', this seems to cause problems under the following scenarios: * Preventing association with broken AP's * Adds latency in roaming So its better to always use the safe value of '1' for dtim period Cc: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_hw: fix dma descriptor rx error bit parsingFelix Fietkau
An Rx DMA descriptor can have multiple error bits set, and some error bits (e.g. MIC failure) are filtered by the driver based on other criteria. Remove the 'else' in various error bit checks so that all error information is properly passed to the driver. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.cSujith Manoharan
And add the copyright/license header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Fix fast channel changeSujith Manoharan
When returning to the operating channel, a full HW reset has to be done instead of a fast channel change. Since sw_scan_complete() is called after the config() call for the home channel, we end up doing a FCC. Fix this issue by checking the OFFCHANNEL flag to determine FCC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Handle FATAL eventsSujith Manoharan
The device has to be reset when a FATAL event is received. Not doing so would leave the card in a non-working state. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Move work cancellation outside of mutexSujith Manoharan
There is no need to lock the various work cancellation calls. This will be helpful when handling FATAL events. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Handle pending URBs properlySujith Manoharan
When doing a channel change, the pending URBs have to be killed properly on calling htc_stop(). This fixes the probe response timeout seen when sending UDP traffic at a high rate and running background scan at the same time. Cc: stable <stable@kernel.org> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k: Few clean ups in beacon config parametersMohammed Shafi Shajakhan
Some minor clean ups in assigning values to beacon config parameters Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Fix comment about removed spinlockHelmut Schaa
The comment doesn't match the code anymore. Fix that. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Remove unused interface spinlockHelmut Schaa
Since the last user of intf->lock is gone we can safely remove it. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Simplify intf->delayed_flags lockingHelmut Schaa
Instead of protecting delayed_flags with a spinlock use atomic bitops to make the code more readable. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Remove superfluous assignment of mpdu_densityHelmut Schaa
The tx desciptor already gets initialized to 0. Hence, there's no need to explicitly assign 0 to mpdu_density here. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Fix panic on frame padding for rt2800 usb devicesIsmael Luceno
Backtrace: rt2800usb_write_tx_data rt2x00queue_write_tx_frame rt2x00mac_tx invoke_tx_handlers __ieee80211_tx ieee80211_tx virt_to_head_page ieee80211_xmit ieee80211_tx_skb ieee80211_scan_work schedule ieee80211_scan_work process_one_work ... It tried to expand the skb past it's end using skb_put. So I replaced it with a call to skb_padto, which takes the issue into account. Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Fix pointer errors.Gertjan van Wingerde
Fix some pointer errors in the various calls to memcpy, memset and memmove. Although none of these errors are fatal (the expression used now results in the same pointer value) it is better to use the proper expression. All errors are having to deal with arrays. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: remove intf->mac field.Gertjan van Wingerde
The mac field of the rt2x00_intf structure is written to once and used twice. In both these uses the mac address is available via other means. Remove this field as it does not appear to be necessary. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Remove intf->bssid field.Gertjan van Wingerde
The bssid field in struct rt2x00_intf is only written to once, and is never read from. Remove this field, as it appears to not be needed. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: allow txstatus_fifo w/o txstatus_taskletJohannes Stezenbach
When DRIVER_REQUIRE_TXSTATUS_FIFO is set, intialize the txstatus_fifo, but initialize rt2x00dev->txstatus_tasklet only when both DRIVER_REQUIRE_TXSTATUS_FIFO and rt2x00dev->ops->lib->txstatus_tasklet are set. This allows the txstatus_fifo to be used by rt2800usb which does not use txstatus_tasklet. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: simplify txstatus_fifo handlingJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04carl9170: fix usb pm suspend->resume woesChristian Lamparter
This patch revamps some common code-paths which are shared between (re-)initialization and suspend/resume subroutines. It also adds some helpful comments about quirks and associated difficulties. It's quite big, but it should fix #25382: <https://bugzilla.kernel.org/show_bug.cgi?id=25382> And hopefully the code is robust enough to deal with all possible suspend/resume scenarios without requiring the user to do any sort of manual and possibly dangerous work. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04carl9170: reduce channel change delayChristian Lamparter
By removing two "safety" msleeps (and an echo nop), the channel change delay is effectively halved. Previously, the delay could be as long as 260 ms and the device could not go off-channel without risking to miss the next DTIM beacon [interval ~307 ms]. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04carl9170: add missing return-value checkChristian Lamparter
This patch adds a forgotten bail-out path. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath5k: fix cycle counter inconsistent lockingBob Copeland
ath5k_reset is called from process context and takes the cc_lock with plain spin_lock(), but cc_lock can also be taken from tasklets in softirq context. Thus we need to at least use spin_lock_bh. This fixes the following lockdep warning: [ 19.967874] sky2 0000:01:00.0: eth0: enabling interface [ 19.982761] ieee80211 phy0: device now idle [ 20.904809] NET: Registered protocol family 17 [ 21.243857] ieee80211 phy0: device no longer idle - scanning [ 21.404343] [ 21.404346] ================================= [ 21.404450] [ INFO: inconsistent lock state ] [ 21.404518] 2.6.37-rc7-wl+ #242 [ 21.404582] --------------------------------- [ 21.404650] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 21.404721] kworker/u:4/982 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 21.404792] (&(&common->cc_lock)->rlock){+.?...}, at: [<f8115780>] ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] {SOFTIRQ-ON-W} state was registered at: [ 21.405011] [<c105cadd>] __lock_acquire+0x62f/0x13c1 [ 21.405011] [<c105d944>] lock_acquire+0xd5/0xf1 [ 21.405011] [<c12c978d>] _raw_spin_lock+0x45/0x72 [ 21.405011] [<f8111533>] ath5k_reset+0x2c0/0x349 [ath5k] [ 21.405011] [<f8111a7a>] ath5k_start+0xb8/0x139 [ath5k] [ 21.405011] [<f849c714>] ieee80211_do_open+0x13f/0x819 [mac80211] [ 21.405011] [<f849ce51>] ieee80211_open+0x63/0x66 [mac80211] [ 21.405011] [<c1258b2e>] __dev_open+0x8d/0xb6 [ 21.405011] [<c1255c64>] __dev_change_flags+0x9d/0x114 [ 21.405011] [<c1258a75>] dev_change_flags+0x18/0x44 [ 21.405011] [<c1262990>] do_setlink+0x23f/0x521 [ 21.405011] [<c1262d58>] rtnl_setlink+0xe6/0xea [ 21.405011] [<c126347c>] rtnetlink_rcv_msg+0x18a/0x1a0 [ 21.405011] [<c126d5f0>] netlink_rcv_skb+0x35/0x7b [ 21.405011] [<c12632eb>] rtnetlink_rcv+0x20/0x27 [ 21.405011] [<c126d370>] netlink_unicast+0x1bb/0x21e [ 21.405011] [<c126db21>] netlink_sendmsg+0x23b/0x288 [ 21.405011] [<c124823c>] sock_sendmsg+0xac/0xc4 [ 21.405011] [<c1248680>] sys_sendmsg+0x152/0x1a2 [ 21.405011] [<c1249b0d>] sys_socketcall+0x214/0x275 [ 21.405011] [<c10029d0>] sysenter_do_call+0x12/0x36 [ 21.405011] irq event stamp: 138032 [ 21.405011] hardirqs last enabled at (138032): [<c12ca252>] _raw_spin_unlock_irqrestore+0x3b/0x5e [ 21.405011] hardirqs last disabled at (138031): [<c12c98cc>] _raw_spin_lock_irqsave+0x18/0x7e [ 21.405011] softirqs last enabled at (138024): [<f84a570e>] ieee80211_tx_skb+0x47/0x49 [mac80211] [ 21.405011] softirqs last disabled at (138027): [<c100452b>] do_softirq+0x63/0xb4 [ 21.405011] [ 21.405011] other info that might help us debug this: [ 21.405011] 3 locks held by kworker/u:4/982: [ 21.405011] #0: (name){+.+.+.}, at: [<c1046158>] process_one_work+0x1b8/0x41b [ 21.405011] #1: ((&(&local->scan_work)->work)){+.+.+.}, at: [<c1046158>] process_one_work+0x1b8/0x41b [ 21.405011] #2: (&local->mtx){+.+.+.}, at: [<f84920fb>] ieee80211_scan_work+0x32/0x4a4 [mac80211] [ 21.405011] [ 21.405011] stack backtrace: [ 21.405011] Pid: 982, comm: kworker/u:4 Not tainted 2.6.37-rc7-wl+ #242 [ 21.405011] Call Trace: [ 21.405011] [<c12c6e68>] ? printk+0x1d/0x25 [ 21.405011] [<c105a742>] print_usage_bug+0x181/0x18b [ 21.405011] [<c105b196>] ? check_usage_forwards+0x0/0xb6 [ 21.405011] [<c105a9ec>] mark_lock+0x2a0/0x4aa [ 21.405011] [<c1059f6d>] ? trace_hardirqs_off+0xb/0xd [ 21.405011] [<c105ca68>] __lock_acquire+0x5ba/0x13c1 [ 21.405011] [<c1059eed>] ? trace_hardirqs_off_caller+0x18/0x8d [ 21.405011] [<c1059f6d>] ? trace_hardirqs_off+0xb/0xd [ 21.405011] [<c1050411>] ? local_clock+0x2c/0x4f [ 21.405011] [<c1059e00>] ? save_trace+0x2/0xa0 [ 21.405011] [<c105ac39>] ? mark_held_locks+0x43/0x5b [ 21.405011] [<c12ca252>] ? _raw_spin_unlock_irqrestore+0x3b/0x5e [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c105d944>] lock_acquire+0xd5/0xf1 [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c12c9b1a>] _raw_spin_lock_bh+0x4a/0x77 [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<f8115780>] ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c105ac39>] ? mark_held_locks+0x43/0x5b [ 21.405011] [<f8113496>] ath5k_tasklet_ani+0x1d/0x27 [ath5k] [ 21.405011] [<c1037304>] tasklet_action+0x96/0x137 [ 21.405011] [<c10379b5>] __do_softirq+0xde/0x1c3 [ 21.405011] [<c10b0cef>] ? arch_get_unmapped_area_topdown+0x3b/0x127 [ 21.405011] [<c10378d7>] ? __do_softirq+0x0/0x1c3 [ 21.405011] <IRQ> [<c1036dee>] ? irq_exit+0x3d/0x49 [ 21.405011] [<c1003b4f>] ? do_IRQ+0x98/0xac [ 21.405011] [<c1002eee>] ? common_interrupt+0x2e/0x34 [ 21.405011] [<c103007b>] ? sys_unshare+0x57/0x226 [ 21.405011] [<c1047fee>] ? queue_delayed_work+0x1/0x27 [ 21.405011] [<f84a83a0>] ? ieee80211_queue_delayed_work+0x2e/0x33 [mac80211] [ 21.405011] [<f8492528>] ? ieee80211_scan_work+0x45f/0x4a4 [mac80211] [ 21.405011] [<c104620e>] ? process_one_work+0x26e/0x41b [ 21.405011] [<c1046158>] ? process_one_work+0x1b8/0x41b [ 21.405011] [<f84920c9>] ? ieee80211_scan_work+0x0/0x4a4 [mac80211] [ 21.405011] [<c10466b6>] ? worker_thread+0x18a/0x2a5 [ 21.405011] [<c12ca25e>] ? _raw_spin_unlock_irqrestore+0x47/0x5e [ 21.405011] [<c104652c>] ? worker_thread+0x0/0x2a5 [ 21.405011] [<c104abe7>] ? kthread+0x67/0x6c [ 21.405011] [<c104ab80>] ? kthread+0x0/0x6c [ 21.405011] [<c1002efa>] ? kernel_thread_helper+0x6/0x10 Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k: fix spur mitigation no-spur case for AR9002Brian Prodoehl
For the AR9002, the spur frequency read from the EEPROM is mangled before being compared against AR_NO_SPUR. This results in the driver trying to set up the spur mitigation for bogus spurs, rather than cleanly breaking out. Signed-off-by: Brian Prodoehl <bprodoehl@nomadio.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04airo: use simple_write_to_bufferAkinobu Mita
Simplify write file operation for /proc files by using simple_write_to_buffer(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 18:16:30 +0000