summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-01-28ixgbe endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28e100 endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28forcedeth endianness bugsAl Viro
* misannotation: struct register_test members are actually host-endian * bug: cpu_to_le64(n) >> 32 instead of cpu_to_le32(n >> 32) in setting ->bufhigh and similar for ->buflow (take low bits, _then_ convert to little-endian, not the other way round). * bug: setup_hw_rings() should not convert to little-endian at all (we feed the result to writel(), not store in shared data structure), let alone try to play with shifting and masking little-endian values. Introduced when setup_hw_rings() went in, screwed both 64bit case and the old code for 32bit rings it had replaced. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28NULL noise in drivers/netAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28e1000 endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28e1000e endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28sungem endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28sunhme endianness annotationsAl Viro
This one is interesting - SBUS and PCI variants have opposite endianness in descriptors (SBUS is sparc-only, so there host-endian == big-endian). Solution: declare a bitwise type (hme32) and in accessor helpers do typechecking and force-casts (once we know that the type is right). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28endianness annotations and fixes for olympicAl Viro
* missing braces in !readl(...) & ... * trivial endianness annotations * in olympic_arb_cmd() the loop collecting fragments of packet is b0rken on big-endian - we have (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr))) as condition and it should have swab16(), not ntohs() - it's host-endian byteswapped, not big-endian. So if we get more than one fragment on big-endian host, we get screwed. This ntohs() got missed back when the rest of those had been switched to swab16() in 2.4.0-test2-pre1 - at a guess, nobody had hit fragmented packets during the testing of PPC fixes. PS: Ken Aaker cc'd on assumption that he is the same guy who'd done the original set of PPC fixes in olympic Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28libertas: use spin_is_locked() instead of spin_trylock() in lbs_interrupt()David Woodhouse
We get scary warnings on UP if we use spin_trylock() and find, as we hoped, that the lock in question is already locked. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: pass channel argument directly to lbs_mesh_config()David Woodhouse
There is weirdness here; the firmware seems to refuse to change channels at will. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: cope with both old and new mesh TLV valuesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: make lbs_update_channel() function non-staticDavid Woodhouse
We'll want to use this for meshfrobbing Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add ethtool support for wake-on-lan configurationDavid Woodhouse
Also, check that suspend is refused if HOST_SLEEP_CFG hasn't been done. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: implement suspend/resume for USB devicesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: implement suspend and resume core methodsDavid Woodhouse
We (ab)use priv->fw_ready to stop the worker thread from sending more commands or data after the response to the HOST_SLEEP_ACTIVATE command comes in. And we set it from the callback function _directly_ to ensure that the worker thread sees it immediately; if we did it in lbs_suspend() after waking up, that might be too late. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: make worker thread not freezableDavid Woodhouse
We want it to send the HOST_SLEEP_ACTIVATE command on the way down... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: switch lbs_cmd() to take a _pointer_ to the command structureDavid Woodhouse
This way, it looks more like a normal function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add lbs_host_sleep_cfg() command functionDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: slight cleanup of netif queue stop/wakeDavid Woodhouse
In particular, we shouldn't be waking the queues in lbs_host_to_card_done() any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add missing newlines in debugging statementsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: be more careful about command responses matching cur_cmdDavid Woodhouse
Especially in the light of OLPC trac #5461, in which the firmware starts sending us seemingly random command responses which bear little relation to the command we sent it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add debugging output to lbs_mesh_config()David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: disable mesh temporarily while setting eth channel/assocDavid Woodhouse
Otherwise the device won't let us change channels. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add missing newline on debug messageDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: allow setting channel on mshX deviceDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: allow get/set SSID on mshX deviceDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: whitespace cleanup in host.hDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill rx_urb_recall and eth_dev members of struct usb_card_recDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill references to mesh autostartDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add lbs_mesh sysfs attribute for enabling meshDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix sparse endianness warnings in scan.cDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: make some more functions staticDavid Woodhouse
sparse was getting on my tits. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: endianness fixes for get_channel/set_channelDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert RF_CHANNEL to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert DATA_RATE to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix case of FWT_ACCESS_LIST_ROUTE and FWT_ACCESS_LIST_NEIGHBOR ↵Dan Williams
commands Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: remove casts from lbs_cmd() and lbs_cmd_with_response() macrosDavid Woodhouse
If stupid people like me give it arguments with the wrong type (like a pointer to the structure, for example, instead of the structure itself), then we should probably notice that at compile time. Otherwise, much confusion ensues. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert CMD_MESH_ACCESS to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix debug output in lbs_cmd_copyback() function.David Woodhouse
Bad dcbw. Always test on big-endian, or at least use sparse. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: rename and re-type bufvirtualaddr to cmdbufDan Williams
Make it a struct cmd_header, since that's what it is, and clean up the places that it's used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: wait for 'firmware ready' event from firmware after loadingDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move removal of lbs_rtap file to lbs_stop_card()David Woodhouse
This prevents us from trying to remove it when it didn't exist, in the error case. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: switch USB cardp->priv to 'struct lbs_private *' and resulting fixDavid Woodhouse
Amazing what interesting things the compiler will tell you if you let it know what types you expect to be passing around. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert GET_HW_SPEC to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add simple copyback command callbackDan Williams
A simple callback which copies the response back into the command buffer that was used to send the command to the card. Will allow for direct command processing outside the mega-switches in cmd.c and cmdresp.c. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: clean up direct command handlingDan Williams
Move direct command handling through __lbs_cmd() over to using the header as the first member of the command structure, and only define the __lbs_cmd() callback in one place rather than 3. Convert boot2 version command to new usage. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't run thread while firmware not yet readyDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: switch to a waitqueue and timer for handling USB firmware loadDavid Woodhouse
No need to busy-wait, even if we did have a 100ms delay in the loop. This makes it easier to support the new 'firmware ready' event which is in the new firmware, too. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: improve reliability of firmware reloading on USBDavid Woodhouse
Increase the delay between issuing the RESET command and the usb reset, and be prepared to discard more than one 'normal' packet from it before it resets. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 00:28:12 +0000