summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rtl8187: Fixed section mismatch in rtl8187_dev.cIhar Hrachyshka
When CONFIG_HOTPLUG=n the following error occures on vmlinux linkage: `.exit.text' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o 'rtl8187_disconnect' function marked as __devexit isn't compiled with no hotplug support. Added __devexit_p macros to fix the problem. Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14rt2x00: Fix NULL pointer error in adhoc/master modeIvo van Doorn
As soon as an interface is enabled, and that interface is in adhoc or master mode, the device will start raising beacondone interrupts. But before the first interrupt is raised, mac80211 will probably not have send any beacons to the device yet, which results in a NULL pointer error when the skb is being freed. Note that the "raise beacondone interrupts without a beacon" is also a bug, and will be addressed later. The more important bug however is preventing the NULL pointer failt itself, since there might be other conditions that could trigger it as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: The ingress_lock member is no longer needed.David S. Miller
Every qdisc is assosciated with a queue, and in the case of ingress qdiscs that will now be netdev->rx_queue so using that queue's lock is the thing to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.c net/mac80211/mlme.c
2008-07-08rtl8187: Change detection of RTL8187B with USB ID of 8187Larry Finger
Some early versions of RTL8187B devices have a USB ID of 0x8187 rather than the 0x8189 of later models. In addition, it appears that these early units also must be programmed with lower power. Previous patches used the Product ID string to detect this situation, but did not address the low power question. This patch uses the hardware version and sets the power accordingly. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating Kconfig to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: change rtl8187_dev.c to support RTL8187B (part 2)Hin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: change rtl8187_dev.c to support RTL8187B (part 1)Hin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl8187_rtl8225.c to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl818x.h to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl8187.h to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Fix register commentsIvo van Doorn
Fix some register documentation in the register header files. This allows better parsing by userspace scripts which in turn helps debugging. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08hostap: don't compile prism2_suspend() for hostap_pci without CONFIG_PMPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08b43legacy: Remove switch statement with 64-bit indexLarry Finger
The gcc 3.4 fork used to compile the MN10300 port emits unwanted __ucmpdi2() calls for switch statements that use a 64bit value. This patch removes such a switch from b43legacy, and makes the code more like that used in b43. Thanks to Adrian Bunk <bunk@kernel.org> for reporting the problem. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Report RX end time for rt2400pciIvo van Doorn
rt2400 is the only currently available rt2x00 driver which supports reporting of the RX end time for frames. Since mac80211 uses this information for IBSS syncing, it is important that it is being reported. v2: Complement 32 bits of RX timestamp with upper 32bits from TSF Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Use ieee80211_hw->workqueue againIvo van Doorn
Remove the rt2x00 singlethreaded workqueue and move the link tuner and packet filter scheduled work to the ieee80211_hw->workqueue again. The only exception is the interface scheduled work handler which uses the mac80211 interface iterator under the RTNL lock. This work needs to be handled on the kernel workqueue to prevent lockdep issues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Decrease alignment headroomIvo van Doorn
We only need 4 bytes of headroom for alignment purposes in the RX frame. It was previously higher for optimization purposes which are no longer possible due to DMA mappings. v2: Fix patch error Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Remove input_polldev requirements for rfkillIvo van Doorn
With the new rfkill interface there is no longer a need for the input_polldev. Create a delayed_work structure which we can put on the mac80211 workqueue and poll the hardware every 1000ms. v2: Decrease poll frequency from 100ms to 1000ms Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08zd1211rw: beacon config error checkingDaniel Drake
Add some error checking to the new beacon configuration code. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08iwlwifi: fix typo which caused iwl_get_tx_fail_reason to ever return an ↵Helmut Schaa
empty string Signed-off-by: Helmut Schaa <hschaa@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08iwlwifi: remove input device and fix rfkill stateAdel Gadllah
This patch fixes the iwlwifi rfkill. It removes the input device from iwl3945, adds support for RFKILL_STATE_HARD_BLOCKED and calls rfkill_force_state() to update the state rather than accessing it directly. The calls to iwl|iwl3945_rfkill_set_hw_state() had to be moved because rfkill_force_state() cannot be called from an atomic context. Tested on iwl3945 and seems to work fine. Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ivo van Doorn <ivdoorn@gmail.com> Cc: Fabien Crespel <fcrespel@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08iwlwifi: request Tx of block ack request if necessaryRon Rindjunsky
This patch sets the block ack request flag if needed Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08iwlwifi: fix error path of iwl_rfkill_initTomas Winkler
This patch cleans rfkill error path. The problem was result of removing the input device Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08vlan: move struct vlan_dev_info to private headerPatrick McHardy
Hide struct vlan_dev_info from drivers to prevent them from growing more creative ways to use it. Provide accessors for the two drivers that currently use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08irda: Remove useless pm_dev referencesRafael J. Wysocki
Some IRDA headers contain references to 'struct pm_dev' that are not necessary any more and may be removed. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08irda: New device ID for nsc-irccVille Syrjala
HP OmniBook 500's DSDT code changes the HID of the FIR device from NSC6001 to HWPC224 when run under an "NT" operating system. Add the new ID to the pnp device id table. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08irda: via-ircc proper dma freeingWang Chen
1. dma should be freed when dma2 request fail. 2. dma2 should be freed too when device close. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-07amd8111e: delete non NAPI code from the driver.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-07starfire: delete non NAPI code from the driver.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-07netdev: remove unused S2IO_NAPIFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-07zd1211rw: add ID for AirTies WUS-201Firat Birlik
I would like to inform you of our zd1211 based usb wifi adapter (AirTies WUS-201), which works with the zd1211rw driver with the following device id definition. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07drivers/net/wireless/iwlwifi/iwl-3945.c Fix type issue on 64bitDarren Jenkins
Coverity CID: 2265 NEGATIVE_RETURNS "rate" is of an unsigned type, and the code requires a signed type. The following patch makes it so. Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07hostap_cs: correct poor NULL checks in suspend/resume routinesJohn W. Linville
This corrects this kernel.org bug: http://bugzilla.kernel.org/show_bug.cgi?id=9701 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-06netdrv: don't truncate VLAN TCI with VLAN strippingPatrick McHardy
The vlan_hwaccel_{rx,receive_skb} functions expect the full TCI field for priority mappings, don't truncate the upper 4 bits. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wan/hdlc_fr.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2008-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-05Merge branch 'davem-next' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-048390: Split 8390 support into a pausing and a non pausing driver coreAlan Cox
Only a few ISA controllers need the pausing version of the 8390 core while PCMCIA, later ISA and PCI do not. More importantly the ISA delays can break non ISA boxes so we must use a different build of 8390.c for the two sets of controllers. No changes since last time as all the points of concerns raised proved to be invalid Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04WAN: Remove no longer needed pvc_desc in FR code.Krzysztof Halasa
Remove no longer needed struct pvc_desc in FR code. Requires "WAN: convert drivers to use built-in netdev_stats" patch. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04WAN: convert drivers to use built-in netdev_statsKrzysztof Halasa
There is no point in using separate net_device_stats structs when the one in struct net_device is present. Compiles. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: add NAPI Rx queue supportPJ Waskiewicz
Update the NAPI implementation to use the new napi_struct infrstructure. This removes the need of multiple net_device structs to implement a multiqueue NAPI. Signed-off-by: PJ Waskiewicz <peter.p.waskiewicz.jr.@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: fix init on 82575 with MNG enabledAlexander Duyck
This patch resolves an issue seen on 82575 adapters with managability pass-thru enabled, which could cause the system to panic. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: eliminate hw from the hw_dbg macro argumentsAuke Kok
Various cosmetic cleanups. Comment fixes. Eliminate the hw part out of the hw_dbg macro since it's always used. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: fix parameter optionsAlexander Duyck
Currently there are items in the driver to support parameters, but there are no parameters being added to the driver. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: cleanup function header commentsJeff Kirsher
Function header comments do not match function name. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: Remove adapter struct from these function call parametersMitch Williams
Simplify a bunch of calls to these functions by moving the adapter struct out of the function arguments since that is not needed. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 08:40:45 +0000