summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-01-29rt2x00: Add mesh supportAndrey Yurovsky
This adds initial support for Mesh Point mode. For this we tell mac80211 that we support NL80211_IFTYPE_MESH_POINT. We also need to send beacons. mac80211 will configure our RX filter accordingly. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Restrict interface between rt2x00link and driversIvo van Doorn
Restrict drivers to only access link_qual structure during link tuning. The contents of these fields are for the drivers and all fields are allowed to be changed to values the driver considers correct. This means that some fields need to be moved outside of this structure to restrict access only to rt2x00link itself. This allows some code to be moved outside of the rt2x00.h header and into rt2x00link.c. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Reduce calls to bbp_read()Ivo van Doorn
The link_tuner() function will always call bbp_read() at the start of the function. Because this is an indirect register access has some costs attached to it (especially for USB hardware). We already store the value read from the register into the vgc_level value inside the link structure. Instead of reading from the register we can read that field directly and base the tuner on that value. This reduces the time the registers are locked with the csr_mutex and speeds up the link_tuner processing. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Move link tuning into seperate fileIvo van Doorn
Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Implement PowersavingIvo van Doorn
Listen to IEEE80211_CONF_PS to determine if the device should drop into powersaving mode. This feature depends on the dynamic power save functionality in mac80211. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Use 64bit atomic register access for TSFMichael Buesch
On modern b43 devices with core rev >=3, the hardware guarantees us an atomic 64bit read/write of the TSF, if we access the lower 32bits first. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Fixup set_key handlingMichael Buesch
This fixes the key handling for mac80211's new key->flags. It also adds TX locking to the set_key handler and adds a comment why this is required. This doesn't fix any known bugs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-26cxgb3: Notify fatal errorsDivy Le Ray
Set up a notification mechanism to inform upper layer modules (iWARP, iSCSI) of a chip reset due to an EEH event or a fatal error. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26smsc911x: leave RX_STOP interrupt permanently enabledSteve Glendinning
smsc911x_set_multicast_list currently performs the only non-atomic read-modify-write of INT_EN. This patch permanently enables the RXSTOP_INT interrupt, and changes the ISR to only conditionally run the multicast filter workaround code. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26smc91x: struct net_device_opsMagnus Damm
Convert the smc91x driver to use struct net_device_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26net: pppoe - stop using proc internalsCyrill Gorcunov
Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26pppol2tp: stop using proc internalsAlexey Dobriyan
PDE_NET usage in driver code is a sign and, indeed, switching to seq_open_net/seq_release_net saves code and fixes bogus things, like user triggerabble BUG_ON(!net) after maybe_get_net, and NULLifying ->private. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26ixgbe: add support KX/KX4 deviceDon Skidmore
And support for the KX/KX4 mezzanine card. Device id 0x10B6. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26ixgbe: fix slow load times on 82598 nicsDon Skidmore
Load times for NICs that use i2c to communicate with the phy were taking ~4.5 sec per port. This fix first checks to see if the link is already up before calling get_link_capabilities, since if it is we don't need query the phy for link state. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-01-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] fix section-based ioremap [NET] am79c961a: fix spin_lock usage [ARM] omap: usb: thou shalt not provide empty release functions [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3 [ARM] clkdev: fix clock matching [ARM] 5370/1: at91: fix rm9200 watchdog [ARM] 5368/1: arch/arm/mach-davinci/usb.c buildfix [ARM] 5365/1: s3cmci: Use new include path of dma.h [ARM] fix StrongARM-11x0 page copy implementation [ARM] omap: ensure OMAP drivers pass a struct device to clk_get() ARM: OMAP: Fix compile for h3 MMC ARM: OMAP: Remove unused platform devices, v3 ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3 ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23 ARM: OMAP: remove duplicated #include's ARM: OMAP: Fix DMA CCR programming for request line > 63, v3 ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS ARM: OMAP: Fix compile for beagle ARM: OMAP: Fix gpio by switching to generic gpio calls, v2 ...
2009-01-26gianfar: Revive VLAN supportAnton Vorontsov
commit 77ecaf2d5a8bfd548eed3f05c1c2e6573d5de4ba ("gianfar: Fix VLAN HW feature related frame/buffer size calculation") wrongly removed priv->vlgrp assignment, and now priv->vlgrp is always NULL. This patch fixes the issue, plus fixes following sparse warning introduced by the same commit: gianfar.c:1406:13: warning: context imbalance in 'gfar_vlan_rx_register' - wrong count at exit gfar_vlan_rx_register() checks for "if (old_grp == grp)" and tries to return w/o dropping the lock. According to net/8021q/vlan.c VLAN core issues rx_register() callback: 1. In register_vlan_dev() only on a newly created group; 2. In unregister_vlan_dev() only if the group becomes empty. Thus the check in the gianfar driver isn't needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26bnx2x: tx_has_work should not wait for FWVladislav Zolotarov
The current tx_has_work waited until all packets sent by the driver are marked as completed by the FW. This is too greedy and it causes the bnx2x_poll to spin in vain. The driver should only check that all packets FW already completed are freed - only in unload flow the driver should make sure that transmit queue is empty Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26netxen: reduce memory footprintDhananjay Phadke
o reduce rx ring size from 8192 to 4096. o cut down old huge lro buffers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26netxen: fix vlan tso/checksum offloadDhananjay Phadke
o set netdev->vlan_features appropriately. o fix tso descriptor initialization for vlan case. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26e1000e: workaround hw errataJesse Brandeburg
There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init. If this bit is not set A0 versions of the 82574 can generate tx hangs. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-25com0020: Add missing symbol export for com20020_netdev_ops.David S. Miller
Thanks to Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANsAlex Williamson
802.1Q expanded the maximum ethernet frame size by 4 bytes for the VLAN tag. We're not taking this into account in virtio_net, which means the buffers we provide to the backend in the virtqueue RX ring aren't big enough to hold a full MTU VLAN packet. For QEMU/KVM, this results in the backend exiting with a packet truncation error. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Acked-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25smsc95xx: fix function prototype of async callbackSteve Glendinning
smsc95xx_async_cmd_callback doesn't currently match usb_complete_t, so there's a cast to force the square peg into the round hole. This patch fixes this properly. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-25smsc95xx: remove unused completion structSteve Glendinning
Oliver Neukum spotted the useless complete() in our async callback. On closer inspection, the entire completion struct is unused. This patch removes it. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-24[NET] am79c961a: fix spin_lock usageUwe Kleine-König
spin_lock functions take a pointer to the lock, not the lock itself. This error was noticed by compiling ebsa110_defconfig for linux-rt where the locking functions obviously are more picky about their arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Roel Kluin <12o3l@tiscali.nl> Cc: Steven Rostedt <srostedt@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-23rtl8187: Add termination packet to prevent stallLarry Finger
The RTL8187 and RTL8187B devices can stall unless an explicit termination packet is sent. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-23iwlwifi: fix rs_get_rate WARN_ON()Abbas, Mohamed
In ieee80211_sta structure there is u64 supp_rates[IEEE80211_NUM_BANDS] this is filled with all support rate from assoc_resp. If we associate with G-band AP only supp_rates of G-band will be set the other band supp_rates will be set to 0. If the user type this command this will cause mac80211 to set to new channel, mac80211 does not disassociate in setting new channel, so the active band is now A-band. then in handling the new essid mac80211 will kick in the assoc steps which involve sending disassociation frame. in this mac80211 will WARN_ON sta->supp_rates[A_BAND] == 0. This fixes: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1822 http://www.kerneloops.org/searchweek.php?search=rs_get_rate Signed-off-by: mohamed abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-23p54usb: fix packet loss with first generation devicesChristian Lamparter
Artur Skawina confirmed that the first generation devices needs the same URB_ZERO_PACKET flag, in oder to finish the pending transfer properly. The second generation has been successfully fixed by "p54usb: fix random traffic stalls (LM87)" (43af18f06d5) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22e1000e: drop lltx, remove unnecessary lockJesse Brandeburg
LLTX is deprecated and complicated, don't use it. It was observed by Don Ash <donash4@gmail.com> that e1000e was acquiring this lock in the NAPI cleanup path. This is obviously a bug, as this is a leftover from when e1000 supported multiple tx queues and fake netdevs. another user reported this to us and tested routing with the 2.6.27 kernel and this patch and reported a 3.5 % improvement in packets forwarded in a multi-port test on 82571 parts. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22phy: Add suspend/resume support to SMSC PHYsSteve Glendinning
All supported SMSC PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22au1000: reorder functionsFlorian Fainelli
This patch reorders functions so that we do longer need forward declarations. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22net: pppoe - get rid of DECLARE_MAC_BUFCyrill Gorcunov
While was playing with PPP namespaces I occasionally brought back DECLARE_MAC_BUF which is not needed (we have %pM here). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22phylib: Fix oops in suspend/resume pathsAnton Vorontsov
Suspend/resume routines check for phydrv != NULL, but that is wrong because "phydrv" comes from container_of(drv). If drv is NULL, then container_of(drv) will return non-NULL result, and the checks won't work. The Freescale TBI PHYs are driver-less, so "drv" is NULL, and that leads to the following oops: Unable to handle kernel paging request for data at address 0xffffffe4 Faulting instruction address: 0xc0215554 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c0215554] mdio_bus_suspend+0x34/0x70 LR [c01cc508] suspend_device+0x258/0x2bc Call Trace: [cfad3da0] [cfad3db8] 0xcfad3db8 (unreliable) [cfad3db0] [c01cc508] suspend_device+0x258/0x2bc [cfad3dd0] [c01cc62c] dpm_suspend+0xc0/0x140 [cfad3e20] [c01cc6f4] device_suspend+0x48/0x5c [cfad3e40] [c0068dd8] suspend_devices_and_enter+0x8c/0x148 [cfad3e60] [c00690f8] enter_state+0x100/0x118 [cfad3e80] [c00691c0] state_store+0xb0/0xe4 [cfad3ea0] [c018c938] kobj_attr_store+0x24/0x3c [cfad3eb0] [c00ea9a8] flush_write_buffer+0x58/0x7c [cfad3ed0] [c00eadf0] sysfs_write_file+0x58/0xa0 [cfad3ef0] [c009e810] vfs_write+0xb4/0x16c [cfad3f10] [c009ed40] sys_write+0x4c/0x90 [cfad3f40] [c0014954] ret_from_syscall+0x0/0x38 [...] This patch fixes the issue, plus removes unneeded parentheses and fixes indentation level in mdio_bus_suspend(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: VersionEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: loopback test failureEilon Greenstein
A link change interrupt might be queued and activated after the loopback was set and it will cause the loopback to fail. The PHY lock should be kept until the loopback test is over. That implies that the bnx2x_test_link should used within the loopback function and not bnx2x_wait_for_link since that function also takes the PHY link Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Missing rmb when waiting for FW responseEilon Greenstein
Waiting for the FW to response requires a memory barrier Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Calling napi_delEilon Greenstein
rmmod might hang without this patch since the reference counter is not going down Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Carrier off first callEilon Greenstein
Call carrier off should not be called after register_netdev since after register netdev open can be called at any time followed by an interrupt that will set it to carrier_on and the probe will resume control and set it to off Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Handling load failuresEilon Greenstein
Failures on load were not handled correctly - separate the flow to handle different failures Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Disable napiEilon Greenstein
Calling napi disabled unconditionally at netif stop Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22bnx2x: Reset HW before useEilon Greenstein
To avoid complications, make sure that the HW is in reset (as it should be) before trying to take it out of reset. In normal flows, the HW is indeed in rest so this should have no effect Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22iwlwifi: return NETDEV_TX_OK from _tx opsReinette Chatre
be consistent with mac80211 drivers and return correct return code. NETDEV_TX_OK is 0, but we need to be consistent wrt formatting amongst implementations re: http://marc.info/?l=linux-wireless&m=123119327419865&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22zd1211rw: adding Sitecom WL-603 (0df6:0036) to the USB id listHin-Tak Leung
Giuseppe Cala <jiveaxe@gmail.com> (The second "a" in "Cala" should be a grave, U+00E0) reported success on zd1211-devs@lists.sourceforge.net. The chip info is: zd1211b chip 0df6:0036 v4810 high 00-0c-f6 AL2230_RF pa0 g--N- The Sitecom WL-603 is detected as a zd1211b with a AL2230 RF transceiver chip. Signed-off-by: Giuseppe Cala <jiveaxe@gmail.com> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54usb: fix nasty use after freeChristian Lamparter
In theory, the firmware acks the received a data frame, before signaling the driver to free it again. However Artur Skawina <art.08.09@gmail.com> has shown that it can happen in reverse order as well. This is very bad and could lead to memory corruptions, oopses and panics. Thanks to Artur Skawina <art.08.09@gmail.com> for reporting and debugging this issue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Artur Skawina <art.08.09@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54: more cryptographic accelerator fixesChristian Lamparter
If we let the firmware do the data encryption, we have to remove the ICV and (M)MIC at the end of the frame before we can give it back to mac80211. Or, these data frames have a few trailing bytes on cooked monitor interfaces. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22p54: add missing break in eeprom parserChr
This patch fixes a obvious memory leak in the eeprom parser. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22orinoco: use KERN_DEBUG for link status messagesPavel Roskin
KERN_INFO is too "loud" for messages that are generated by the ordinary events, such as accociation. Use of KERN_DEBUG is consistent with mac80211. Suggested by Michael Gilbert <michael.s.gilbert@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 14:38:01 +0000