summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) sky2: Fix oops in sky2_xmit_frame() after TX timeout Documentation/3c509: document ethtool support af_packet: Don't use skb after dev_queue_xmit() vxge: use pci_dma_mapping_error to test return value netfilter: ebtables: enforce CAP_NET_ADMIN e1000e: fix and commonize code for setting the receive address registers e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e: perform 10/100 adaptive IFS only on parts that support it e1000e: don't accumulate PHY statistics on PHY read failure e1000e: call pci_save_state() after pci_restore_state() netxen: update version to 4.0.72 netxen: fix set mac addr netxen: fix smatch warning netxen: fix tx ring memory leak tcp: update the netstamp_needed counter when cloning sockets TI DaVinci EMAC: Handle emac module clock correctly. dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips ixgbe: Fix compiler warning about variable being used uninitialized netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() mv643xx_eth: don't include cache padding in rx desc buffer size ... Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
2010-01-12sky2: Fix oops in sky2_xmit_frame() after TX timeoutJarek Poplawski
During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete(). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925 With debugging by: Mike McCormack <mikem@ring3k.org> Reported-by: Berck E. Nash <flyboy@gmail.com> Tested-by: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10vxge: use pci_dma_mapping_error to test return valueDenis Kirjanov
pci_dma_mapping_error should be used to test return value of pci_map_single or pci_map_page. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/addr: Correct CONFIG_IPv6 to CONFIG_IPV6 mlx4_core: Fix cleanup in __mlx4_init_one() error path IB/mlx4: Fix queue overflow check in post_recv IB/mlx4: Initialize SRQ scatter entries when creating an SRQ
2010-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCIe AER: prevent AER injection if hardware masks error reporting PCI/PM: Use per-device D3 delays PCI: Check the node argument passed to cpumask_of_node PCI: AER: fix aer inject result in kernel oops PCI: pcie portdrv: style cleanup
2010-01-08e1000e: fix and commonize code for setting the receive address registersBruce Allan
Fix e1000e_rar_set() to flush consecutive register writes to avoid write combining which some parts cannot handle. Update e1000e_init_rx_addrs() to call the fixed e1000e_rar_set() instead of duplicating code. Also change e1000e_rar_set() to _not_ set the Address Valid bit if the MAC address is all zeros. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: e1000e_enable_tx_pkt_filtering() returns wrong valueBruce Allan
e1000e_enable_tx_pkt_filtering() will return a non-zero value if the driver fails to enable the manageability interface on the host for any reason; instead it should retun zero to indicate filtering has been disabled. Also provide a single exit point for the function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: perform 10/100 adaptive IFS only on parts that support itBruce Allan
Adaptive IFS which involves writing to the Adaptive IFS Throttle register was being done for all devices supported by the driver even though it is not supported (i.e. the register doesn't even exist) on some devices. The feature is supported on 8257x/82583 and ICH/PCH based devices, but not on ESB2. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: don't accumulate PHY statistics on PHY read failureBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08e1000e: call pci_save_state() after pci_restore_state()Bruce Allan
Due to a change in pci_restore_state()[1] which clears the saved_state flag, the driver should call pci_save_state() to set the flag once again to avoid issues with EEH (same fix that recently was submitted for ixgbe). [1] commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: update version to 4.0.72Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix set mac addrAmit Kumar Salecha
o If tx and rx resources are not available, during set mac request. Then this request wont be passed to firmware and it will be added to driver mac list and will never make it to firmware. So if resources are not available, don't add it to driver mac list. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix smatch warningAmit Kumar Salecha
o Fix pointless assignments Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08netxen: fix tx ring memory leakAmit Kumar Salecha
o While unloading driver or resetting the context, tx ring was not getting free. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07TI DaVinci EMAC: Handle emac module clock correctly.Sriram
In the driver probe function the emac module clock needs to be enabled before calling register_netdev(). As soon as the device is registered the driver get_stats function can be invoked by the core - the module clock must be switched on to be able to read from stats registers. Also explicitly call matching clk_disable for failure conditions in probe function. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chipsBen Hutchings
The Davicom DM9100 and DM9102 chips are used on the motherboards of some SPARC systems (supported by the tulip driver) and also in PCI expansion cards (supported by the dmfe driver). There is no difference in the PCI device ids for the two different configurations, so these drivers both claim the device ids. However, it is possible to distinguish the two configurations by the presence of Open Firmware properties for them, so we do that. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07ixgbe: Fix compiler warning about variable being used uninitializedPJ Waskiewicz
tc is still throwing a warning that is could be used uninitialized. This fixes it, and properly formats the device ID checks for the use of this variable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07mv643xx_eth: don't include cache padding in rx desc buffer sizeSaeed Bishara
If NET_SKB_PAD is not a multiple of the cache line size, mv643xx_eth allocates a couple of extra bytes at the start of each receive buffer to make the data payload end up on a cache line boundary. These extra bytes are skb_reserve()'d before DMA mapping, so they should not be included in the DMA map byte count (as the mapping is done starting at skb->data), nor should they be included in the receive descriptor buffer size field, or the hardware can end up DMAing beyond the end of the buffer, which can happen if someone sends us a larger-than-MTU sized packet. This problem was introduced in commit 7fd96ce47ff ("mv643xx_eth: rework receive skb cache alignment", May 6 2009), but hasn't appeared to be problematic so far, probably as the main users of mv643xx_eth all have NET_SKB_PAD == L1_CACHE_BYTES. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07NET: atlx, fix memory leakJiri Slaby
Stanse found a memory leak in atl2_get_eeprom. eeprom_buff is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: Jie Yang <jie.yang@atheros.com> Cc: atl1-devel@lists.sourceforge.net Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07pcmcia: ncmlan_cs: remove odd bracketAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07cs89x0: Always report failure to request interruptMark Brown
A failure on request_irq() is always fatal but unlike other fatal errors it's only reported to the user if net_debug is set. Make the diagnostic unconditional and raise the priority so that errors are more obvious to the user. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: fixed missing newlinesJan Dumon
Fixed missing newlines in calls to dev_warn & dev_err. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: Fix for 5 sec timeouts with v2.x firmwareJan Dumon
Don't send flow control settings to any port other than the modem port. Older firmware ignored this request but did sent a reply. Newer firmware just ignores it without reply and causes a 5 second timeout every time a port (except for the modem port) is opened or if tiocm settings are changed. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: Attempt to recover from usb bus errorsJan Dumon
Attempt to reset the usb device when we receive usb bus errors. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: don't change the state of a closed portJan Dumon
Don't change the state of a port if it's not open. This fixes an issue where a port sometimes has to be opened twice before data can be received. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: Fix for endian issues on big endian machinesJan Dumon
Some fields are always little endian and have to be converted on big endian machines. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07hso: Add Vendor/Product ID's for new devicesJan Dumon
Add product ID's for new devices. Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06pcnet_cs: add cis of KTI PE520 pcmcia network cardKen Kawasaki
pcnet_cs,serial_cs: add cis of KTI PE520 pcmcia network card, and serial card(Sierra Wireless AC860). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06ucc_geth: Fix the wrong the Rx/Tx FIFO sizeDave Liu
current the Rx/Tx FIFO size settings cause problem when four UEC ethernets work simultaneously. eg: GETH1, UEM-J15, GETH2, UEC-J5 on 8569MDS board $ ifconfig eth0 10.193.20.166 $ ifconfig eth1 10.193.20.167 $ ifconfig eth2 10.193.20.168 then $ ifconfig eth3 10.193.20.169 The fourth ethernet will cause all of interface broken, you cann't ping successfully any more. The patch fix this issue for MPC8569 Rev1.0 and Rev2.0 Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06mlx4_core: Fix cleanup in __mlx4_init_one() error pathEli Cohen
If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-05ARM: 5865/1: nuc900 ethernet driver needs miiLi Jie
nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-04PCI/PM: Use per-device D3 delaysRafael J. Wysocki
It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-03netxen: fix ethtool link testSucheta Chakraborty
o Fix ethtool link test for NX3031 chip. o Remove unused code from phy interrupt callback Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03netxen: fix ethtool register dumpSucheta Chakraborty
o Dump registers such as tx ring and rx ring counter, firmware state, niu regs, etc. which can be useful for debugging purpose. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03rrunner: fix buffer overflowDan Carpenter
tx_skbuff is define as: struct sk_buff *tx_skbuff[TX_RING_ENTRIES]; EVT_RING_ENTRIES is 64 and TX_RING_ENTRIES is 32. This function is in a error path so that's why it wasn't noticed. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03broadcom: Fix &&/|| confusion in bcm54xx_adjust_rxrefclk()roel kluin
This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03net: Test off by one in sh_eth_reset()roel kluin
If no break occurred, cnt reaches 0 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03niu: timeout ignored in tcam_wait_bit()roel kluin
With `while (--limit > 0)' i reaches 0 after the loop, so upon timeout the error was not returned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03atarilance: timeout ignored in lance_open()roel kluin
With `while (--i > 0)' i reaches 0 after the loop, so upon timeout the error was not issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03drivers/net : Correct the size argument to kzallocJulia Lawall
lp->rx_skb has type struct sk_buff **, not struct sk_buff *, so the elements of the array should have pointer type, not structure type. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03hamradio: avoid null deref v3Dan Carpenter
This should address the problems in version 1 (lazy) and version 2 (ugly). Bump the stats on orig_dev not on the newly assigned NULL dev variable. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03usbnet: test off by oneroel kluin
With `while (i++ < MII_TIMEOUT)' i reaches MII_TIMEOUT + 1 after the loop This is probably unlikely a problem in practice. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03drivers/net/can: Correct NULL testJulia Lawall
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03via-velocity: Give RX descriptors to the NIC later on open or MTU changeBen Hutchings
velocity_open() calls velocity_give_many_rx_descs(), which gives RX descriptors to the NIC, before installing an interrupt handler or calling velocity_init_registers(). I think this is very unsafe and it appears to explain the bug report <http://bugs.debian.org/508527>. On MTU change, velocity_give_many_rx_descs() is again called before velocity_init_registers(). I'm not sure whether this is unsafe but it does look wrong. Therefore, move the calls to velocity_give_many_rx_descs() after request_irq() and velocity_init_registers(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30fsl_pq_mdio: Fix iomem unmapping for non-eTSEC2.0 controllersAnton Vorontsov
We use a rather complicated logic to support eTSEC and eTSEC2.0 registers maps in a single driver. Currently, the code tries to unmap 'regs', but for non-eTSEC2.0 controllers 'regs' doesn't point to a mapping start, and this might cause badness on probe failure or module removal: Freescale PowerQUICC MII Bus: probed Trying to vfree() nonexistent vm area (e107f000) ------------[ cut here ]------------ Badness at c00a7754 [verbose debug info unavailable] NIP: c00a7754 LR: c00a7754 CTR: c02231ec [...] NIP [c00a7754] __vunmap+0xec/0xf4 LR [c00a7754] __vunmap+0xec/0xf4 Call Trace: [df827e50] [c00a7754] __vunmap+0xec/0xf4 (unreliable) [df827e70] [c001519c] iounmap+0x44/0x54 [df827e80] [c028b924] fsl_pq_mdio_probe+0x1cc/0x2fc [df827eb0] [c02fb9b4] of_platform_device_probe+0x5c/0x84 [df827ed0] [c0229928] really_probe+0x78/0x1a8 [df827ef0] [c0229b20] __driver_attach+0xa4/0xa8 Fix this by introducing a proper priv structure (finally!), which now holds 'regs' and 'map' fields separately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30ucc_geth: Fix netdev watchdog triggering on suspendAnton Vorontsov
Sometimes ucc_geth fails to suspend with the following trace: ucc_geth e0103000.ucc: suspend ucc_geth e0102000.ucc: suspend NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:255 NIP: c021cb5c LR: c021cb5c CTR: c01ab4b4 [...] NIP [c021cb5c] dev_watchdog+0x298/0x2a8 LR [c021cb5c] dev_watchdog+0x298/0x2a8 Call Trace: [c0389da0] [c021cb5c] dev_watchdog+0x298/0x2a8 (unreliable) [c0389e00] [c0031ed8] run_timer_softirq+0x16c/0x1dc [c0389e50] [c002c638] __do_softirq+0xa4/0x11c [...] This patch fixes the issue by properly detaching the device on suspend, and attaching it back on resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30phylib: Properly reinitialize PHYs after hibernationAnton Vorontsov
Since hibernation assumes power loss, we should fully reinitialize PHYs (including platform fixups), as if PHYs were just attached. This patch factors phy_init_hw() out of phy_attach_direct(), then converts mdio_bus to dev_pm_ops and adds an appropriate restore() callback. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30phylib: Fix deadlock on resumeAnton Vorontsov
Sometimes kernel hangs on resume with the following trace: ucc_geth e0102000.ucc: resume INFO: task bash:1764 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D 0fecf43c 0 1764 1763 0x00000000 Call Trace: [cf9a7c10] [c0012868] ret_from_except+0x0/0x14 (unreliable) --- Exception: cf9a7ce0 at __switch_to+0x4c/0x6c LR = 0xcf9a7cc0 [cf9a7cd0] [c0008c14] __switch_to+0x4c/0x6c (unreliable) [cf9a7ce0] [c028bcfc] schedule+0x158/0x260 [cf9a7d10] [c028c720] __mutex_lock_slowpath+0x80/0xd8 [cf9a7d40] [c01cf388] phy_stop+0x20/0x70 [cf9a7d50] [c01d514c] ugeth_resume+0x6c/0x13c [...] Here is why. On suspend: - PM core starts suspending devices, ucc_geth_suspend gets called; - ucc_geth calls phy_stop() on suspend. Note that phy_stop() is mostly asynchronous so it doesn't block ucc_geth's suspend routine, it just sets PHY_HALTED state and disables PHY's interrupts; - Suddenly the state machine gets scheduled, it grabs the phydev->lock mutex and tries to process the PHY_HALTED state, so it calls phydev->adjust_link(phydev->attached_dev). In ucc_geth case adjust_link() calls msleep(), which reschedules the code flow back to PM core, which now finishes suspend and so we end up sleeping with phydev->lock mutex held. On resume: - PM core starts resuming devices (notice that nobody rescheduled the state machine yet, so the mutex is still held), the core calls ucc_geth's resume routine; - ucc_geth_resume restarts the PHY with phy_stop()/phy_start() sequence, and the phy_*() calls are trying to grab the phydev->lock mutex. Here comes the deadlock. This patch fixes the issue by stopping the state machine on suspend and starting it again on resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (74 commits) Revert "b43: Enforce DMA descriptor memory constraints" iwmc3200wifi: fix array out-of-boundary access wl1251: timeout one too soon in wl1251_boot_run_firmware() mac80211: fix propagation of failed hardware reconfigurations mac80211: fix race with suspend and dynamic_ps_disable_work ath9k: fix missed error codes in the tx status check ath9k: wake hardware during AMPDU TX actions ath9k: wake hardware for interface IBSS/AP/Mesh removal ath9k: fix suspend by waking device prior to stop cfg80211: fix error path in cfg80211_wext_siwscan wl1271_cmd.c: cleanup char => u8 iwlwifi: Storage class should be before const qualifier ath9k: Storage class should be before const qualifier cfg80211: fix race between deauth and assoc response wireless: remove remaining qual code rt2x00: Add USB ID for Linksys WUSB 600N rev 2. ath5k: fix SWI calibration interrupt storm mac80211: fix ibss join with fixed-bssid libertas: Remove carrier signaling from the scan code orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled ...
2009-12-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6