summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-12-14igb: Fix for issue where values could be too high for udelay function.Carolyn Wyborny
This patch changes the igb_phy_has_link function to check the value of the parameter before deciding to use udelay or mdelay in order to be sure that the value is not too high for udelay function. CC: stable kernel <stable@vger.kernel.org> # 3.9+ Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com> Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-14i40e: fix null dereferenceJesse Brandeburg
If the vsi->tx_rings structure is NULL we don't want to panic. Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12xen-netback: fix gso_prefix checkPaul Durrant
There is a mistake in checking the gso_prefix mask when passing large packets to a guest. The wrong shift is applied to the bit - the raw skb gso type is used rather then the translated one. This leads to large packets being handed to the guest without the GSO metadata. This patch fixes the check. The mistake manifested as errors whilst running Microsoft HCK large packet offload tests between a pair of Windows 8 VMs. I have verified this patch fixes those errors. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12drivers: net: cpsw: fix for cpsw crash when build as modulesMugunthan V N
When CPSW and Davinci MDIO are build as modules, CPSW crashes when accessing CPSW registers in CPSW probe. The same is working in built-in as the CPSW clocks are enabled in Davindi MDIO probe, SO Enabling the clocks before accessing the version register and moving out the other register access to cpsw device open. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12xen-netback: napi: don't prematurely request a tx eventPaul Durrant
This patch changes the RING_FINAL_CHECK_FOR_REQUESTS in xenvif_build_tx_gops to a check for RING_HAS_UNCONSUMED_REQUESTS as the former call has the side effect of advancing the ring event pointer and therefore inviting another interrupt from the frontend before the napi poll has actually finished, thereby defeating the point of napi. The event pointer is updated by RING_FINAL_CHECK_FOR_REQUESTS in xenvif_poll, the napi poll function, if the work done is less than the budget i.e. when actually transitioning back to interrupt mode. Reported-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12xen-netback: napi: fix abuse of budgetPaul Durrant
netback seems to be somewhat confused about the napi budget parameter. The parameter is supposed to limit the number of skbs processed in each poll, but netback has this confused with grant operations. This patch fixes that, properly limiting the work done in each poll. Note that this limit makes sure we do not process any more data from the shared ring than we intend to pass back from the poll. This is important to prevent tx_queue potentially growing without bound. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net:fec: remove duplicate lines in comment about errata ERR006358Philippe De Muyter
commit 031916568a1aa2ef1809f86d26f0bcfa215ff5c0 worked around errata ERR006358, but comment contains duplicated lines, impairing the readability. Remove them. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"David S. Miller
This reverts commit 99023e90fe5c147ea0665bda86764ea44f08a622. Accidently checked this into 'net' instead of 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-118390 : Replace ei_debug with msg_enable/NETIF_MSG_* featureMatthew Whitehead
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11xen-netback: make sure skb linear area covers checksum fieldPaul Durrant
skb_partial_csum_set requires that the linear area of the skb covers the checksum field. The checksum setup code in netback was only doing that pullup in the case when the pseudo header checksum was being recalculated though. This patch makes that pullup unconditional. (I pullup the whole transport header just for simplicity; the requirement is only for the check field but in the case of UDP this is the last field in the header and in the case of TCP it's the last but one). The lack of pullup manifested as failures running Microsoft HCK network tests on a pair of Windows 8 VMs and it has been verified that this patch fixes the problem. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: smc91x: Fix device tree based configuration so it's usableTony Lindgren
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11macvtap: signal truncated packetsJason Wang
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tun: unbreak truncated packet signallingJason Wang
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by nev return a length greater than iov length in tun_put_user(). This patch fixes by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of io length. Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11micrel: add support for KSZ8041RNLISergei Shtylyov
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-12-10tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0Nat Gurumoorthy
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: Revert macvtap/tun truncation signalling changes.David S. Miller
Jason Wang and Michael S. Tsirkin are still discussing how to properly fix this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10macvtap: signal truncated packetsJason Wang
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the truncated checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10tun: unbreak truncated packet signallingJason Wang
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by never return a length greater than iov length in tun_put_user(). This patch fixes this by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of iov length. Reported-by: Vlad Yasevich <vyasevich@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10vxlan: release rt when found circular routeFan Du
Otherwise causing dst memory leakage. Have Checked all other type tunnel device transmit implementation, no such things happens anymore. Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10Merge branch 'sfc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Several fixes for the PTP hardware support added in 3.7: 1. Fix filtering of PTP packets on the TX path to be robust against bad header lengths. 2. Limit logging on the RX path in case of a PTP packet flood, partly from Laurence Evans. 3. Disable PTP hardware when the interface is down so that we don't receive RX timestamp events, from Alexandre Rames. 4. Maintain clock frequency adjustment when a time offset is applied. Also fixes for the SFC9100 family support added in 3.12: 5. Take the RX prefix length into account when applying NET_IP_ALIGN, from Andrew Rybchenko. 6. Work around a bug that breaks communication between the driver and firmware, from Robert Stonehouse. Please also queue these up for the appropriate stable branches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: allwinner: emac: Add missing free_irqMaxime Ripard
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: emaclite: add barriers to support Xilinx Zynq platformSrikanth Thokala
This patch adds barriers at appropriate places to ensure the driver works on Xilinx Zynq ARM-based SoC platform. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: emaclite: Remove unnecessary code that enables/disables interrupts on ↵Srikanth Thokala
PONG buffers There are no specific interrupts for the PONG buffer on both transmit and receive side, same interrupt is valid for both buffers. So, this patch removes this code. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09ath9k: fix duration calculation for non-aggregated packetsFelix Fietkau
When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-06sfc: Poll for MCDI completion once before timeout occursRobert Stonehouse
There is an as-yet unexplained bug that sometimes prevents (or delays) the driver seeing the completion event for a completed MCDI request on the SFC9120. The requested configuration change will have happened but the driver assumes it to have failed, and this can result in further failures. We can mitigate this by polling for completion after unsuccessfully waiting for an event. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: Refactor efx_mcdi_poll() by introducing efx_mcdi_poll_once()Robert Stonehouse
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: RX buffer allocation takes prefix size into account in IP header alignmentAndrew Rybchenko
rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: Maintain current frequency adjustment when applying a time offsetBen Hutchings
There is a single MCDI PTP operation for setting the frequency adjustment and applying a time offset to the hardware clock. When applying a time offset we should not change the frequency adjustment. These two operations can now be requested separately but this requires a flash firmware update. Keep using the single operation, but remember and repeat the previous frequency adjustment. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: Stop/re-start PTP when stopping/starting the datapath.Alexandre Rames
This disables PTP when we bring the interface down to avoid getting unmatched RX timestamp events, and tries to re-enable it when bringing the interface up. [bwh: Make efx_ptp_stop() safe on Falcon. Introduce efx_ptp_{start,stop}_datapath() functions; we'll expand them later.] Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: Rate-limit log message for PTP packets without a matching timestamp eventBen Hutchings
In case of a flood of PTP packets, the timestamp peripheral and MC firmware on the SFN[56]322F boards may not be able to provide timestamp events for all packets. Don't complain too much about this. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: PTP: Moderate log message on event queue overflowLaurence Evans
Limit syslog flood if a PTP packet storm occurs. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06virtio-net: free bufs correctly on invalid packet lengthMichael Dalton
When a packet with invalid length arrives, ensure that the packet is freed correctly if mergeable packet buffers and big packets (GUEST_TSO4) are both enabled. Signed-off-by: Michael Dalton <mwdalton@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: mvneta: Fix incorrect DMA unmapping sizeEzequiel Garcia
The current code unmaps the DMA mapping created for rx skb_buff's by using the data_size as the the mapping size. This is wrong since the correct size to specify should match the size used to create the mapping. This commit removes the following DMA_API_DEBUG warning: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860() mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92 [<c0013600>] (unwind_backtrace+0x0/0xf8) from [<c0010fb8>] (show_stack+0x10/0x14) [<c0010fb8>] (show_stack+0x10/0x14) from [<c001afa0>] (warn_slowpath_common+0x48/0x68) [<c001afa0>] (warn_slowpath_common+0x48/0x68) from [<c001b01c>] (warn_slowpath_fmt+0x30/0x40) [<c001b01c>] (warn_slowpath_fmt+0x30/0x40) from [<c018d0fc>] (check_unmap+0x3a8/0x860) [<c018d0fc>] (check_unmap+0x3a8/0x860) from [<c018d734>] (debug_dma_unmap_page+0x64/0x70) [<c018d734>] (debug_dma_unmap_page+0x64/0x70) from [<c0233f78>] (mvneta_rx+0xec/0x468) [<c0233f78>] (mvneta_rx+0xec/0x468) from [<c023436c>] (mvneta_poll+0x78/0x16c) [<c023436c>] (mvneta_poll+0x78/0x16c) from [<c02db468>] (net_rx_action+0x94/0x160) [<c02db468>] (net_rx_action+0x94/0x160) from [<c0021e68>] (__do_softirq+0xe8/0x1d0) [<c0021e68>] (__do_softirq+0xe8/0x1d0) from [<c0021ff8>] (do_softirq+0x4c/0x58) [<c0021ff8>] (do_softirq+0x4c/0x58) from [<c0022228>] (irq_exit+0x58/0x90) [<c0022228>] (irq_exit+0x58/0x90) from [<c000e7c8>] (handle_IRQ+0x3c/0x94) [<c000e7c8>] (handle_IRQ+0x3c/0x94) from [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) from [<c000dc20>] (__irq_svc+0x40/0x50) Exception stack(0xc04f1f70 to 0xc04f1fb8) 1f60: c1fe46f8 00000000 00001d92 00001d92 1f80: c04f0000 c04f0000 c04f84a4 c03e081c c05220e7 00000001 c05220e7 c04f0000 1fa0: 00000000 c04f1fb8 c000eaf8 c004c048 60000113 ffffffff [<c000dc20>] (__irq_svc+0x40/0x50) from [<c004c048>] (cpu_startup_entry+0x54/0x128) [<c004c048>] (cpu_startup_entry+0x54/0x128) from [<c04c1a14>] (start_kernel+0x29c/0x2f0) [<c04c1a14>] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074) ---[ end trace d4955f6acd178110 ]--- Mapped at: [<c018d600>] debug_dma_map_page+0x4c/0x11c [<c0235d6c>] mvneta_setup_rxqs+0x398/0x598 [<c0236084>] mvneta_open+0x40/0x17c [<c02dbbd4>] __dev_open+0x9c/0x100 [<c02dbe58>] __dev_change_flags+0x7c/0x134 Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06sfc: Add length checks to efx_xmit_with_hwtstamp() and efx_ptp_is_ptp_tx()Ben Hutchings
efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that have invalid IPv4 and UDP headers. Add checks that: - the transport header has been found - there is enough space between network and transport header offset for an IPv4 header - there is enough space after the transport header offset for a UDP header Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06virtio: delete napi structures from netdev before releasing memoryAndrey Vagin
free_netdev calls netif_napi_del too, but it's too late, because napi structures are placed on vi->rq. netif_napi_add() is called from virtnet_alloc_queues. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables virtio_balloon pcspkr virtio_net(-) i2c_pii CPU: 1 PID: 347 Comm: rmmod Not tainted 3.13.0-rc2+ #171 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b779c420 ti: ffff8800379e0000 task.ti: ffff8800379e0000 RIP: 0010:[<ffffffff81322e19>] [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP: 0018:ffff8800379e1dd0 EFLAGS: 00010a83 RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800379c2fd0 RCX: dead000000200200 RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000001 RDI: ffff8800379c2fd0 RBP: ffff8800379e1dd0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800379c2f90 R13: ffff880037839160 R14: 0000000000000000 R15: 00000000013352f0 FS: 00007f1400e34740(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f464124c763 CR3: 00000000b68cf000 CR4: 00000000000006e0 Stack: ffff8800379e1df0 ffffffff8155beab 6b6b6b6b6b6b6b2b ffff8800378391c0 ffff8800379e1e18 ffffffff8156499b ffff880037839be0 ffff880037839d20 ffff88003779d3f0 ffff8800379e1e38 ffffffffa003477c ffff88003779d388 Call Trace: [<ffffffff8155beab>] netif_napi_del+0x1b/0x80 [<ffffffff8156499b>] free_netdev+0x8b/0x110 [<ffffffffa003477c>] virtnet_remove+0x7c/0x90 [virtio_net] [<ffffffff813ae323>] virtio_dev_remove+0x23/0x80 [<ffffffff813f62ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813f6ca0>] driver_detach+0xc0/0xd0 [<ffffffff813f5f28>] bus_remove_driver+0x58/0xd0 [<ffffffff813f72ec>] driver_unregister+0x2c/0x50 [<ffffffff813ae65e>] unregister_virtio_driver+0xe/0x10 [<ffffffffa0036942>] virtio_net_driver_exit+0x10/0x6ce [virtio_net] [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 RIP [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP <ffff8800379e1dd0> ---[ end trace d5931cd3f87c9763 ]--- Fixes: 986a4f4d452d (virtio_net: multiqueue support) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06virtio-net: determine type of bufs correctlyAndrey Vagin
free_unused_bufs must check vi->mergeable_rx_bufs before vi->big_packets, because we use this sequence in other places. Otherwise we allocate buffer of one type, then free it as another type. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables pcspkr virtio_balloon virtio_net(-) i2c_pii CPU: 0 PID: 400 Comm: rmmod Not tainted 3.13.0-rc2+ #170 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b6d2a210 ti: ffff8800aed32000 task.ti: ffff8800aed32000 RIP: 0010:[<ffffffffa00345f3>] [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net] RSP: 0018:ffff8800aed33dd8 EFLAGS: 00010202 RAX: ffff8800b1fe2c00 RBX: ffff8800b66a7240 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800b8419a68 RDI: ffff8800b66a1148 RBP: ffff8800aed33e00 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffff8800b66a1148 R14: 0000000000000000 R15: 000077ff80000000 FS: 00007fc4f9c4e740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f63f432f000 CR3: 00000000b6538000 CR4: 00000000000006f0 Stack: ffff8800b66a7240 ffff8800b66a7380 ffff8800377bd3f0 0000000000000000 00000000023302f0 ffff8800aed33e18 ffffffffa00346e2 ffff8800b66a7240 ffff8800aed33e38 ffffffffa003474d ffff8800377bd388 ffff8800377bd390 Call Trace: [<ffffffffa00346e2>] remove_vq_common+0x22/0x40 [virtio_net] [<ffffffffa003474d>] virtnet_remove+0x4d/0x90 [virtio_net] [<ffffffff813ae303>] virtio_dev_remove+0x23/0x80 [<ffffffff813f62cf>] __device_release_driver+0x7f/0xf0 [<ffffffff813f6c80>] driver_detach+0xc0/0xd0 [<ffffffff813f5f08>] bus_remove_driver+0x58/0xd0 [<ffffffff813f72cc>] driver_unregister+0x2c/0x50 [<ffffffff813ae63e>] unregister_virtio_driver+0xe/0x10 [<ffffffffa0036852>] virtio_net_driver_exit+0x10/0x7be [virtio_net] [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b Code: c0 74 55 0f 1f 44 00 00 80 7b 30 00 74 7a 48 8b 50 30 4c 89 e6 48 03 73 20 48 85 d2 0f 84 bb 00 00 00 66 0f RIP [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net] RSP <ffff8800aed33dd8> ---[ end trace edb570ea923cce9c ]--- Fixes: 2613af0ed18a (virtio_net: migrate mergeable rx buffers to page frag allocators) Cc: Michael Dalton <mwdalton@google.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06bonding: fix packets_per_slave showingNikolay Aleksandrov
There's an issue when showing the value of packets_per_slave due to using signed integer. The value may be < 0 and thus not put through reciprocal_value() before showing. This patch makes it use unsigned integer when showing it. CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06be2net: Free/delete pmacs (in be_clear()) only if they existSomnath Kotur
During suspend-resume and lancer error recovery we will cleanup and re-initialize the resources through be_clear() and be_setup() respectively. During re-initialisation in be_setup(), if be_get_config() fails, we'll again call be_clear() which will cause a NULL pointer dereference as adapter->pmac_id is already freed. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06be2net: Fix Lancer error recovery to distinguish FW downloadSomnath Kotur
The Firmware update would be detected by looking at the sliport_error1/ sliport_error2 register values(0x02/0x00). If its not a FW reset the current messaging would take place. If the error is due to FW reset, log a message to user that "Firmware update in progress" and also do not log sliport_status and sliport_error register values. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06tun: update file current positionZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06macvtap: update file current positionZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05forcedeth: run loopback test only on chipsets that support itIvan Vecera
The driver incorrectly run loopback test on chips that don't support it. Loopback test is only supported by chips that has DEV_HAS_TEST_EXTENDED flag and returns 4 (NV_TEST_COUNT_EXTENDED) as test count. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05bonding: add arp_ip_target checks when install the moduledingtianhong
When I install the bonding with the wrong arp_ip_target, just like arp_ip_target=500.500.500.500, the arp_ip_target was transfored to 245.245.245.244 and stored in the ip target success, it is uncorrect, so I add checks to avoid adding wrong address. The in4_pton() will set wrong ip address to 0.0.0.0 and return 0, also use the micro IS_IP_TARGET_UNUSABLE_ADDRESS to simplify the code. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05bnx2x: avoid null pointer dereference when enabling SR-IOVMichal Kalderon
Fixed NULL pointer dereference when dynamically activating SR-IOV after vf database failed to be allocated in probe stage (for example due to no ARI support in pci hub). Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05net: davinci_emac: Fix platform data handling and make usable for am3517Tony Lindgren
When booted with device tree, we may still have platform data passed as auxdata. For am3517 this is needed for passing the interrupt_enable and interrupt_disable callbacks that access the omap system control module registers. These callback functions will eventually go away when we have a separate system control module driver. Some of the things that are currently passed as platform data we don't need to set up as device tree properties as they are always the same on am3517. So let's use a new compatible flag for those so we can get those from the device tree match data. Also note that we need to fix setting of phy_dev to NULL instead of an empty string as the code later on uses that to find the first phy on the mdio bus. This seems to have been caused by 5d69e0076a72 (net: davinci_emac: switch to new mdio). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05qlge: Update version to 1.00.00.34Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05qlge: Allow enable/disable rx/tx vlan acceleration independentlyJitendra Kalsaria
o Fix the driver to allow user to enable/disable rx/tx vlan acceleration independently. For example: ethtool -K ethX rxvlan on/off ethtool -K ethX txvlan on/off Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05qlge: Fix ethtool statisticsJitendra Kalsaria
o Receive mac error stat was getting overwritten by other stats. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05xen-netback: fix fragment detection in checksum setupPaul Durrant
The code to detect fragments in checksum_setup() was missing for IPv4 and too eager for IPv6. (It transpires that Windows seems to send IPv6 packets with a fragment header even if they are not a fragment - i.e. offset is zero, and M bit is not set). This patch also incorporates a fix to callers of maybe_pull_tail() where skb->network_header was being erroneously added to the length argument. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> cc: David Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-17 03:37:35 +0000