summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-02-24rtlwifi: Need to include vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-24skge: don't mark carrier down at startStephen Hemminger
The API for network devices has changed so that setting carrier off at probe is no longer required. This should fix the IPv6 addrconf issue. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29612 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: George Billios <gbillios@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24rtl8192c: fix compilation errorsJohannes Berg
On my G5 this fails to compile with drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict since you can't export static functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman
This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24[SCSI] bnx2i: Added support for the 57712(E) devicesEddie Wai
Moved all PCI_DEVICE_ID_NX2_57712(E) definitions to pci_ids.h Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24igb: update version stringCarolyn Wyborny
This will synchronize the version with the out of tree driver which shares its functionality. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: Update Intel copyright notice for driver source.Carolyn Wyborny
This fix updates copyright information to include current year 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: add support for VF Transmit rate limit using iproute2Lior Levy
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igbvf: remove Tx hang detectionLior Levy
Removed Tx hang detection mechanism from igbvf. This mechanism has no affect and can cause false alarm message in some cases. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Fix name of function in function header commentGreg Rose
Some of the function names in function header comments did not match actual name of the function. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Enable jumbo frame support for X540 VFGreg Rose
The X540 controller allows jumbo frame setup on a per VF basis. Enable use of jumbo frames when the VF device belongs to the X540 controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbe: Enable Jumbo Frames on the X540 10Gigabit ControllerGreg Rose
The X540 controller supports jumbo frames in SR-IOV mode. Allow configuration of jumbo frames either in the PF driver or on behalf of a VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-23Merge branch 'r8169-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-02-23Added support for usb ethernet (0x0fe6, 0x9700)Shahar Havivi
The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r8169: fix RTL8168DP power off issue.Hayes Wang
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: correct settings of rtl8102e.Hayes Wang
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: fix incorrect args to oob notify.Hayes Wang
It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23DM9000B: Fix PHY power for network down/upHenry Nestler
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23DM9000B: Fix reg_save after spin_lock in dm9000_timeoutHenry Nestler
The spin_lock should hold before reading register. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23qlcnic: Remove validation for max tx and max rx queuesRajesh Borundia
Max rx queues and tx queues are governed by fimware. So driver should not validate these values. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23qlcnic: fix checks for auto_fw_resetamit salecha
o Remove checks of 1 for auto_fw_reset module parameter. auto_fw_reset is of type int and can have value > 1. o Remove unnecessary #define for 1 Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r6040: bump to version 0.27 and date 23Feb2011Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r6040: fix multicast operationsShawn Lin
The original code does not work well when the number of mulitcast address to handle is greater than MCAST_MAX. It only enable promiscous mode instead of multicast hash table mode, so the hash table function will not be activated and all multicast frames will be recieved in this condition. This patch fixes the following issues with the r6040 NIC operating in multicast: 1) When the IFF_ALLMULTI flag is set, we should write 0xffff to the NIC hash table registers to make it process multicast traffic. 2) When the number of multicast address to handle is smaller than MCAST_MAX, we should use the NIC multicast registers MID1_{L,M,H}. 3) The hashing of the address was not correct, due to an invalid substraction (15 - (crc & 0x0f)) instead of (crc & 0x0f) and an incorrect crc algorithm (ether_crc_le) instead of (ether_crc). 4) If necessary, we should set HASH_EN flag in MCR0 to enable multicast hash table function. Reported-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Tested-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Signed-off-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Albert Chen <albert.chen@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23atl1[ce]: fix sparse warningsstephen hemminger
The dmaw_block is an enum and max_pay_load is u32. Therefore sparse gives warning about comparison of unsigned and signed value. Resolve by using min_t to force cast. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23rtlwifi: rtl8192ce: rtl8192cu: Fix multiple def errors for allyesconfig buildLarry Finger
As noted by Stephan Rothwell, an allyesconfig build fails since rtl8192cu was merged with failures such as: drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_phy_sw_chnl': (.opd+0xf30): multiple definition of `rtl92c_phy_sw_chnl' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0xb70): first defined here drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_fill_h2c_cmd': (.opd+0x288): multiple definition of `rtl92c_fill_h2c_cmd' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0x288): first defined here These are caused because the code shared between rtl8192ce and rtl8192cu is included in both drivers. This has been fixed by creating a new modue that contains the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Eliminate udelay calls with too large valuesWilly Tarreau
On ARM, compilation of rtlwifi/efuse.c fails with the message: ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! On inspection, the faulty calls are in routine efuse_reset_loader(), a routine that is never used, and the faulty routine is deleted. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Let rtlwifi build when PCI is not enabledWilly Tarreau
On systems where PCI does not exist, a build of rtlwifi will fail. Apply the same fix in case there are systems with PCI but not USB. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtl8192cu: fix build error (vmalloc/vfree undefined)Willy Tarreau
On the ARM system, a build fails due to missing include. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23rtlwifi: Fix build when RTL8192CU is selected, but RTL8192CE is notWilly Tarreau
The wireless Makefile does not build rtlwifi for rtl8192cu unless rtl8192ce is selected. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: rename RX_FLAG_TSFTJohannes Berg
The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: rev1: restore PHY state after RSSI operationsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: rev1: enable some gain ctl workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23b43: N-PHY: fix 0x2055 radio workaround conditionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix error path in URB allocationSujith Manoharan
ath9k_hif_usb_alloc_urbs() takes care of freeing all the allocated URBs for the various endpoints when an error occurs. Calling ath9k_hif_usb_dealloc_urbs() would cause a panic since the URBs have already been freed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add debug code to print endpoint mappingSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix RX filtersSujith Manoharan
Add ATH9K_RX_FILTER_UNCOMP_BA_BAR and ATH9K_RX_FILTER_PSPOLL when mac80211 requires it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix host RX initializationSujith Manoharan
There is no need to set the BSSID mask or opmode when initializing RX, they would be set correctly in the HW reset routine. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Fix TBTT calculation for IBSS modeSujith Manoharan
The target beacon transmission time has to be synced with the HW TSF when configuring beacon timers in Adhoc mode. Failing to do this would cause erroneous beacon transmission, for example, on completion of a scan run to check for IBSS merges. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Configure beacon timers in AP modeSujith Manoharan
Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add ANI for AP modeSujith Manoharan
The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Calculate and set the HW opmodeSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Allow AP interface to be createdSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Maintain individual counters for interfacesSujith Manoharan
This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Protect ampdu_action with a mutexSujith Manoharan
This is required when issuing commands to the firmware. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Use VIF from the packet's control dataSujith Manoharan
There is no need to use a locally stored reference. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Make sequence number calculation per-VIFSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Set the BSSID mask for multiple interfacesSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_ASSOCIATED variableSujith Manoharan
mac80211 stores the association state in ieee80211_bss_conf. Use this and remove the local state, which is incorrect anyway since it is stored globally and not on a per-VIF basis. Restarting ANI and reconfiguration of HW beacon timers when a scan run ends requires more work. This is handled by iterating over the active interfaces. Finally, remove the useless check for associated status in RX processing. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Remove OP_PROTECT_ENABLESujith Manoharan
CTS protection can be obtained from mac80211 directly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-28 13:49:59 +0000