summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-12-31e100: fix typo in MDI/MDI-X eeprom check in e100_phy_initJohn W. Linville
Although it doesn't explicitly say so, commit 60ffa478759f39a2 ("e100: Fix MDIO/MDIO-X") appears to be intended to revert the earlier commit 648951451e6d2d53 ("e100: fixed e100 MDI/MDI-X issues"). However, careful examination reveals that the attempted revert actually _inverted_ the test for eeprom_mdix_enabled. That is bound to program a few PHYs incorrectly... https://bugzilla.redhat.com/show_bug.cgi?id=1156417 Signed-off-by: "John W. Linville" <linville@tuxdriver.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-31tun: return proper error code from tun_do_readAlex Gartrell
Instead of -1 with EAGAIN, read on a O_NONBLOCK tun fd will return 0. This fixes this by properly returning the error code from __skb_recv_datagram. Signed-off-by: Alex Gartrell <agartrell@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31tun: Fixed unsigned/signed comparisonAlex Gartrell
Validated that this was actually using the unsigned comparison with gdb. Signed-off-by: Alex Gartrell <agartrell@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: add stats for dma mapping errorGovindarajulu Varadarajan
This patch adds generic statistics for enic. As of now dma_map_error is the only member. dma_map_erro is incremented every time dma maping error happens. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: check dma_mapping_errorGovindarajulu Varadarajan
This patch checks for pci_dma_mapping_error() after dma mapping the data. If the dma mapping fails we remove the previously queued frags and return NETDEV_TX_OK. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: make vnic_wq_buf doubly linkedGovindarajulu Varadarajan
This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping error check, in case some frag's dma map fails, we need to move back and remove previously queued buffers. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31net: fec: add Wake-on-LAN supportNimrod Andy
Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode in low power status, when system enter suspend status, Magic packet can wake up system even if all SOC clocks are gate. The patch doing below things: - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - add standard ethtool WOL interface - enable the ENET interrupt to wake us Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: gianfar: add missing __iomem annotationKevin Hao
Fix the following spare warning: drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:3521:60: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:3521:60: got unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/freescale/gianfar.c:205:16: expected unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: got unsigned int [noderef] <asn:2>*<noident> drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:2918:44: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:2918:44: got unsigned int [usertype] *rfbptr Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: gianfar: mark the local functions staticKevin Hao
Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30virtio-net: don't do header check for dodgy gso packetsJason Wang
There's no need to do header check for virtio-net since: - Host sets dodgy for all gso packets from guest and check the header. - Host should be prepared for all kinds of evil packets from guest, since malicious guest can send any kinds of packet. So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30arm: sa1100: move irda header to linux/platform_dataDmitry Eremin-Solenikov
In the end asm/mach/irda.h header is not used by anybody except sa1100. Move the header to the platform data includes dir and rename it to irda-sa11x0.h. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: sxgbe: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30ksz884x: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30atl1e: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30atheros: atlx: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30timecounter: keep track of accumulated fractional nanosecondsRichard Cochran
The current timecounter implementation will drop a variable amount of resolution, depending on the magnitude of the time delta. In other words, reading the clock too often or too close to a time stamp conversion will introduce errors into the time values. This patch fixes the issue by introducing a fractional nanosecond field that accumulates the low order bits. Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: cpts: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: mlx4: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: ixgbe: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: igb: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: e1000e: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: fec: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: bnx2x: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30net: xgbe: convert to timecounter adjtime.Richard Cochran
This patch changes the driver to use the new and improved method for adjusting the offset of a timecounter. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30time: move the timecounter/cyclecounter code into its own file.Richard Cochran
The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30cc2520: fix zero perm_extended_addr addressVarka Bhadram
It will remove the bug of havine zero perm_extended_addr address. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-30cc2520: remove 'ret' goto labelVarka Bhadram
If allocation of memory fails instead of going to ret goto label and returning from there, we can directly return -ENOMEM on failure. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-30cc2520: use devm_kzalloc(.., sizeof(*pointer), ..) patternVarka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-30net: ieee802154: don't use devm_pinctrl_get_select_default() in probeWolfram Sang
Since commit ab78029ecc34 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-28iwlwifi: mvm: rs: organize and cleanup constsEyal Shapira
Organize and cleanup the consts used by rs. This is part of making some of these configurable. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Alter passive scan fragmentation parameters in case of multi-MACHaim Dreyfuss
Make passive scan fragmentation depends on the number of active interfaces. In case of single-MAC, make passive scan less fragmented. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: call to pcie_apply_destination also on family 8000 B stepEran Harary
In order to config the FW and to allocate monitor buffer driver should run the function iwl_pcie_apply_destination immediately after FW sections are loaded. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Configure EBS scan ratioHaim Dreyfuss
This configuration defines the ratio between number of scan iterations where EBS is involved to those where it is not. This configuration was left unconfigured due to inaccurate documentation. Fix documentation as well. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: ask the fw to wakeup (from d0i3) on sysassertEliad Peller
Set the wakeup flag (of the d3 command) to configure the fw to wakeup when sysassert happens while in d0i3. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: tlv: add support for IWL_UCODE_TLV_SDIO_ADMA_ADDR TLVLiad Kaufman
A new TLV supplies the ADMA address for SDIO mode, allowing the driver to configure the default base address to be this (as given in the FW), rather than hardcoding the values to use until the FW sends the ALIVE message. Use the value given by the FW in the IWL_UCODE_TLV_SDIO_ADMA_ADDR TLV for setting the default SDTM base address until the FW sends the ALIVE message. If it isn't given in the FW - use the current hardcoded values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_sta_from_mac80211() consistentlyJohannes Berg
A number of places (still) use a direct operation, use iwl_mvm_sta_from_mac80211() consistently. In one place also move it into the variable initializer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_vif_from_mac80211() consistentlyJohannes Berg
There are a few places not using it, use it at those places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: remove useless extern definition of iwl4265_2ac_sdio_cfgEmmanuel Grumbach
This device was renamed, but the external definition remained there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: clean refs before stop_device()Eliad Peller
Some implementations (i.e. mini_rpm) assume the references are managed only while the device is started. Move the stale reference cleanup before stopping the device in order to make them happy. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: dvm: main: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: dvm: tt: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support 2 different channelsEmmanuel Grumbach
The driver and the firmware now support 2 different channels at the same time. Advertise this capability to the stack. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: wait for d0i3 exit on hw restartEliad Peller
On hw restart, make sure to wait for d0i3 exit (by checking the IN_D0I3 status bit). This is needed in order to avoid the stale d0i3_exit_work from doing harm (e.g. unref cleared reference). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: consider d0i3_disable in iwl_mvm_is_d0i3_supported()Eliad Peller
Consider the iwlwifi module param d0i3_disable when considering whether d0i3 is supported. (There is currently no need to differentiate between supported and enabled, so keep the function as-is) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support IWL_D0I3_MODE_ON_SUSPEND d0i3 modeEliad Peller
Enter d0i3 on suspend, and exit d0i3. Wait for the command responses in both cases. Use this mode in case of pcie trans. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: support multiple d0i3 modesEliad Peller
Allow configuring additional d0i3 mode, in which the fw will be configured to enter d0i3 only on suspend (while keeping the wake_lock accounting as usual) The d0i3 mode to use will be determined by the underlying trans layer. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: allow both d0i3 and d3 wowlan configuration modesEliad Peller
d3 and d0i3 shouldn't be mutually exclusive. Set supported wowlan triggers by looking for each of them, and check on suspend/resume which flow should be used ("any" trigger is supported by d0i3, and all the others by d3) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: pcie: add basic reference accountingEliad Peller
Implement the ref/unref trans ops and track both tx and host command queues (and hold references while they are not empty). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: convert the SRAM dump to the generic memory dumpEmmanuel Grumbach
This allows to add the offset. The type of the generic memory dump will let the parser know that this is SRAM. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: change SMEM dump to general purpose memory dumpEmmanuel Grumbach
Instead of adding a dump type for each type of memory, change the SMEM type to be a general purpose memory dump. Add the type of the memory and its offset in the device in the dump itself. This will allow an external parser to know where this memory came from. Note that since this type isn't really in use yet, this is not a real problem. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-18 02:54:04 +0000