| Age | Commit message (Collapse) | Author |
|---|
|
ERROR: "allnodes" [drivers/w1/masters/w1-gpio.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[grant.likely: allnodes is too generic; rename to of_allnodes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Ville Syrjala <syrjala@sci.fi>
|
|
Currently of_mdiobus_register() function registers all PHY devices,
independetly from their status property in device tree. According to
"ePAPR 1.1" spec, device should only be registered if there is no
"status" property, or it has "ok" (or "okay") value (see
of_device_is_available()). In case of "platform devices",
of_platform_device_create_pdata() checks for "status" and ensures
that disabled devices are not pupulated. But such check for MDIO buses
was missing until now. Fix it.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Currently of_i2c_register_devices() function registers all i2c devices,
independently from their status property in device tree. According to
"ePAPR 1.1" spec, device should only be registered if there is no
"status" property, or it has "ok" (or "okay") value (see
of_device_is_available()). In case of "platform devices",
of_platform_device_create_pdata() checks for "status" and ensures
that disabled devices are not populated. But such check for i2c buses
was missing until now. Fix it.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Acked-by: Rob Herring <robherring2@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
The existing function does not change the passed device_node pointer. It is
only handed to of_get_property which itself takes a const struct device_node.
of_parse_phandle() can therefore take a const pointer as well.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[grant.likely: drop extraneous whitespace change]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
The following pattern of code is tempting:
for_each_matching_node(np, table) {
match = of_match_node(table, np);
However, this results in iterating over table twice; the second time
inside of_match_node(). The implementation of for_each_matching_node()
already found the match, so this is redundant. Invent new function
of_find_matching_node_and_match() and macro
for_each_matching_node_and_match() to remove the double iteration,
thus transforming the above code to:
for_each_matching_node_and_match(np, table, &match)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
This adds following helper routines:
- of_property_read_u8_array()
- of_property_read_u16_array()
- of_property_read_u8()
- of_property_read_u16()
This expects arrays from DT to be passed as:
- u8 array:
property = /bits/ 8 <0x50 0x60 0x70>;
- u16 array:
property = /bits/ 16 <0x5000 0x6000 0x7000>;
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Commit 509b7455 (of/fdt: Don't copy garbage after "/" in root node path)
sets the path length to 0 to ignore any garbage after "/" in the root
node path. This has the side effect of also ignoring '\0' at the end of
the root node path. This patch sets the ignores the garbage by setting
the last character to '\0' and length to 1.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Constify 'pathp' in order to get rid of the following warning:
drivers/of/fdt.c:491:10: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
[Rob Herring: also constify np and lp]
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Neither of these should ever be changed once set. Make them const and
fix up the users that try to modify it in-place. In one case
kmalloc+memcpy is replaced with kstrdup() to avoid modifying the string.
Build tested with defconfigs on ARM, PowerPC, Sparc, MIPS, x86 among
others.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Julian Calaby <julian.calaby@gmail.com>
|
|
The root node path must be internally converted to "/", or various
pieces of code looking for it that way will fail. The code to do
that however had a bug where we might incorrectly append pieces
of the original path from the fdt to the "/".
We should probably add a proper dedicated accessor for the root node
but in the meantime this patch should fix it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
drivers/of/platform.c:110:59: warning: incorrect type in argument 2 (different base types)
drivers/of/platform.c:110:59: expected restricted __be32 const [usertype] *addr
drivers/of/platform.c:110:59: got unsigned int const [usertype] *[assigned] reg
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
drivers/of/irq.c:195:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:196:51: warning: restricted __be32 degrades to integer
drivers/of/irq.c:199:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:201:58: warning: restricted __be32 degrades to integer
drivers/of/irq.c:470:37: warning: incorrect type in assignment (different modifiers)
drivers/of/irq.c:470:37: expected int ( *[usertype] irq_init_cb )( ... )
drivers/of/irq.c:470:37: got void const *const data
drivers/of/irq.c:96:5: error: symbol 'of_irq_map_raw' redeclared with different type (originally declared at include/linux/of_irq.h:61) - incompatible argument 2 (different base types)
drivers/of/of_pci_irq.c:91:40: warning: incorrect type in argument 2 (different base types)
drivers/of/of_pci_irq.c:91:40: expected unsigned int const [usertype] *intspec
drivers/of/of_pci_irq.c:91:40: got restricted __be32 *<noident>
drivers/of/of_pci_irq.c:91:53: warning: incorrect type in argument 4 (different base types)
drivers/of/of_pci_irq.c:91:53: expected unsigned int const [usertype] *addr
drivers/of/of_pci_irq.c:91:53: got restricted __be32 *<noident>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
drivers/of/address.c:66:29: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:66:29: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:66:29: got unsigned int [usertype] *addr
drivers/of/address.c:87:32: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:87:32: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:87:32: got unsigned int [usertype] *addr
drivers/of/address.c:91:30: warning: incorrect type in assignment (different base types)
drivers/of/address.c:91:30: expected unsigned int [unsigned] [usertype] <noident>
drivers/of/address.c:91:30: got restricted __be32 [usertype] <noident>
drivers/of/address.c:92:22: warning: incorrect type in assignment (different base types)
drivers/of/address.c:92:22: expected unsigned int [unsigned] [usertype] <noident>
drivers/of/address.c:92:22: got restricted __be32 [usertype] <noident>
drivers/of/address.c:147:35: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:147:35: expected restricted __be32 const [usertype] *addr
drivers/of/address.c:147:35: got unsigned int [usertype] *addr
drivers/of/address.c:157:34: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:157:34: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:157:34: got unsigned int [usertype] *
drivers/of/address.c:256:29: warning: restricted __be32 degrades to integer
drivers/of/address.c:256:36: warning: restricted __be32 degrades to integer
drivers/of/address.c:262:34: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:262:34: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:262:34: got unsigned int [usertype] *
drivers/of/address.c:372:41: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:372:41: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:372:41: got unsigned int [usertype] *addr
drivers/of/address.c:395:53: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:395:53: expected restricted __be32 const [usertype] *addr
drivers/of/address.c:395:53: got unsigned int [usertype] *addr
drivers/of/address.c:443:50: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:443:50: expected restricted __be32 const [usertype] *addr
drivers/of/address.c:443:50: got unsigned int *<noident>
drivers/of/address.c:455:49: warning: incorrect type in argument 1 (different base types)
drivers/of/address.c:455:49: expected restricted __be32 const [usertype] *cell
drivers/of/address.c:455:49: got unsigned int *<noident>
drivers/of/address.c:480:60: warning: incorrect type in argument 2 (different base types)
drivers/of/address.c:480:60: expected restricted __be32 const [usertype] *addr
drivers/of/address.c:480:60: got unsigned int *<noident>
drivers/of/address.c:412:5: warning: symbol '__of_translate_address' was not declared. Should it be static?
drivers/of/address.c:520:14: error: symbol 'of_get_address' redeclared with different type (originally declared at include/linux/of_address.h:22) - different base types
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Pull devicetree updates from Rob Herring:
- Import of latest upstream device tree compiler (dtc)
- New function of_get_child_by_name
- Support for #size-cells of 0 and #addr-cells of >2
- Couple of DT binding documentation updates
Fix up trivial conflicts due to of_get_child_by_name() having been added
next to the new of_get_next_available_child().
* tag 'dt-for-3.7' of git://sources.calxeda.com/kernel/linux:
MAINTAINERS: add scripts/dtc under Devicetree maintainers
dtc: import latest upstream dtc
dt: Document general interrupt controller bindings
dt/s3c64xx/spi: Use of_get_child_by_name to get a named child
dt: introduce of_get_child_by_name to get child node by name
of: i2c: add support for wakeup-source property
of/address: Handle #address-cells > 2 specially
DT: export of_irq_to_resource_table()
devicetree: serial: Add documentation for imx serial
devicetree: pwm: mxs-pwm.txt: Fix reg field annotation
of: Allow busses with #size-cells=0
|
|
This patch introduces of_get_child_by_name function to get a child node
by its name in a given parent node.
Without this patch each driver code has to iterate the parent and do
a string compare, However having of_get_child_by_name libary function would
avoid code duplication, errors and is more convenient.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Add support for specifying a generic "wakeup-source" property on i2c
clients, which will set the I2C_CLIENT_WAKE flag, thus configuring the
device to wake the system from suspend (via IRQ).
This obviously doesn't make sense on devices lacking IRQ, but since we
still allow that in the i2c_board_info case, I don't see a reason to
restrict it here.
Note: Since the generic i2c bindings aren't documented in the kernel,
I didn't find a good place to add documentation for this binding
extension. I still think it makes sense to have a generic property
instead of having each device do its own binding for the same.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
When a bus specifies #address-cells > 2, of_bus_default_map() now
assumes that the mapping isn't for a physical address but rather an
identifier that needs to match exactly.
This is required by bindings that use multiple cells to translate a
resource to the parent bus (device index, type, ...).
See here for the discussion:
https://lists.ozlabs.org/pipermail/devicetree-discuss/2012-June/016577.html
Originally-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Trivial patch that exports the of_irq_to_resource_table() symbol so that
modules can use it.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Macro for_each_child_of_node() makes it easy to iterate over all of the
children for a given device tree node, including those nodes that are
marked as unavailable (i.e. status = "disabled").
Introduce for_each_available_child_of_node(), which is like
for_each_child_of_node(), but it automatically skips unavailable nodes.
This also requires the introduction of helper function
of_get_next_available_child(), which returns the next available child
node.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's quite legitimate for a DT node to specify #size-cells=0. One example
is a node that's used to collect a number of non-memory-mapped devices.
In that scenario, there may be multiple child nodes with the same name
(type) thus necessitating the use of unit addresses in node names, and
reg properties:
/ {
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
...
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
...
};
...
};
};
However, #size-cells=0 prevents translation of reg property values into
the parent node's address space. In turn, this triggers the kernel to
emit error messages during boot, such as:
prom_parse: Bad cell count for /regulators/regulator@0
To prevent printing these error messages for legitimate DT content, a
number of changes are made:
1) of_get_address()/of_get_pci_address() are modified only to validate
the value of #address-cells, and not #size-cells.
2) of_can_translate_address() is added to indicate whether address
translation is possible.
3) of_device_make_bus_id() is modified to name devices based on the
translated address only where possible, and otherwise fall back to
using the (first cell of the) raw untranslated address.
4) of_device_alloc() is modified to create memory resources for a device
only if the address can be translated into the CPU's address space.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Pull devicetree updates from Rob Herring:
"A small set of changes for devicetree:
- Couple of Documentation fixes
- Addition of new helper function of_node_full_name
- Improve of_parse_phandle_with_args return values
- Some NULL related sparse fixes"
Grant's busy packing.
* tag 'dt-for-3.6' of git://sources.calxeda.com/kernel/linux:
of: mtd: nuke useless const qualifier
devicetree: add helper inline for retrieving a node's full name
of: return -ENOENT when no property
usage-model.txt: fix typo machine_init->init_machine
of: Fix null pointer related warnings in base.c file
LED: Fix missing semicolon in OF documentation
of: fix a few typos in the binding documentation
|
|
Pull networking changes from David S Miller:
1) Remove the ipv4 routing cache. Now lookups go directly into the FIB
trie and use prebuilt routes cached there.
No more garbage collection, no more rDOS attacks on the routing
cache. Instead we now get predictable and consistent performance,
no matter what the pattern of traffic we service.
This has been almost 2 years in the making. Special thanks to
Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
have helped along the way.
I'm sure that with a change of this magnitude there will be some
kind of fallout, but such things ought the be simple to fix at this
point. Luckily I'm not European so I'll be around all of August to
fix things :-)
The major stages of this work here are each fronted by a forced
merge commit whose commit message contains a top-level description
of the motivations and implementation issues.
2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
input.
3) TCP SYN/ACK performance tweaks from Eric Dumazet.
4) Add namespace support for netfilter L4 conntrack helpers, from Gao
Feng.
5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
Yuval Mintz.
6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.
7) Support for connection tracker helpers in userspace, from Pablo
Neira Ayuso.
8) Allow userspace driven TX load balancing functions in TEAM driver,
from Jiri Pirko.
9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
embedded gotos.
10) TCP Small Queues, essentially minimize the amount of TCP data queued
up in the packet scheduler layer. Whereas the existing BQL (Byte
Queue Limits) limits the pkt_sched --> netdevice queuing levels,
this controls the TCP --> pkt_sched queueing levels.
From Eric Dumazet.
11) Reduce the number of get_page/put_page ops done on SKB fragments,
from Alexander Duyck.
12) Implement protection against blind resets in TCP (RFC 5961), from
Eric Dumazet.
13) Support the client side of TCP Fast Open, basically the ability to
send data in the SYN exchange, from Yuchung Cheng.
Basically, the sender queues up data with a sendmsg() call using
MSG_FASTOPEN, then they do the connect() which emits the queued up
fastopen data.
14) Avoid all the problems we get into in TCP when timers or PMTU events
hit a locked socket. The TCP Small Queues changes added a
tcp_release_cb() that allows us to queue work up to the
release_sock() caller, and that's what we use here too. From Eric
Dumazet.
15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
r8169: revert "add byte queue limit support".
ipv4: Change rt->rt_iif encoding.
net: Make skb->skb_iif always track skb->dev
ipv4: Prepare for change of rt->rt_iif encoding.
ipv4: Remove all RTCF_DIRECTSRC handliing.
ipv4: Really ignore ICMP address requests/replies.
decnet: Don't set RTCF_DIRECTSRC.
net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
ipv4: Remove redundant assignment
rds: set correct msg_namelen
openvswitch: potential NULL deref in sample()
tcp: dont drop MTU reduction indications
bnx2x: Add new 57840 device IDs
tcp: avoid oops in tcp_metrics and reset tcpm_stamp
niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
niu: Fix to check for dma mapping errors.
net: Fix references to out-of-scope variables in put_cmsg_compat()
net: ethernet: davinci_emac: add pm_runtime support
net: ethernet: davinci_emac: Remove unnecessary #include
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
"Notable highlights:
- iommu improvements from Anton removing the per-iommu global lock in
favor of dividing the DMA space into pools, each with its own lock,
and hashed on the CPU number. Along with making the locking more
fine grained, this gives significant improvements in multiqueue
networking scalability.
- Still from Anton, we know provide a vdso based variant of getcpu
which makes sched_getcpu with the appropriate glibc patch something
like 18 times faster.
- More anton goodness (he's been busy !) in other areas such as a
faster __clear_user and copy_page on P7, various perf fixes to
improve sampling quality, etc...
- One more step toward removing legacy i2c interfaces by using new
device-tree based probing of platform devices for the AOA audio
drivers
- A nice series of patches from Michael Neuling that helps avoiding
confusion between register numbers and litterals in assembly code,
trying to enforce the use of "%rN" register names in gas rather
than plain numbers.
- A pile of FSL updates
- The usual bunch of small fixes, cleanups etc...
You may spot a change to drivers/char/mem. The patch got no comment
or ack from outside, it's a trivial patch to allow the architecture to
skip creating /dev/port, which we use to disable it on ppc64 that
don't have a legacy brige. On those, IO ports 0...64K are not mapped
in kernel space at all, so accesses to /dev/port cause oopses (and
yes, distros -still- ship userspace that bangs hard coded ports such
as kbdrate)."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
powerpc/mpic: Create a revmap with enough entries for IPIs and timers
Remove stale .rej file
powerpc/iommu: Fix iommu pool initialization
powerpc/eeh: Check handle_eeh_events() return value
powerpc/85xx: Add phy nodes in SGMII mode for MPC8536/44/72DS & P2020DS
powerpc/e500: add paravirt QEMU platform
powerpc/mpc85xx_ds: convert to unified PCI init
powerpc/fsl-pci: get PCI init out of board files
powerpc/85xx: Update corenet64_smp_defconfig
powerpc/85xx: Update corenet32_smp_defconfig
powerpc/85xx: Rename P1021RDB-PC device trees to be consistent
powerpc/watchdog: move booke watchdog param related code to setup-common.c
sound/aoa: Adapt to new i2c probing scheme
i2c/powermac: Improve detection of devices from device-tree
powerpc: Disable /dev/port interface on systems without an ISA bridge
of: Improve prom_update_property() function
powerpc: Add "memory" attribute for mfmsr()
powerpc/ftrace: Fix assembly trampoline register usage
powerpc/hw_breakpoints: Fix incorrect pointer access
powerpc: Put the gpr save/restore functions in their own section
...
|
|
Conflicts:
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- multiple omap2+ bug fixes
- a regression on ux500 dt support
- a build failure on shmobile
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
|
|
prom_update_property() currently fails if the property doesn't
actually exist yet which isn't what we want. Change to add-or-update
instead of update-only, then we can remove a lot duplicated lines.
Suggested-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This reverts commit 107a84e61cdd3406c842a0e4be7efffd3a05dba6.
Meelis Roos reports a regression since 3.5-rc5 that stops Sun Fire V100
and Sun Netra X1 sparc64 machines from booting, hanging after enabling
serial console. He bisected it to commit 107a84e61cdd.
Rob Herring explains:
"The problem is match combinations of compatible plus name and/or type
fail to match correctly. I have a fix for this, but given how late it
is for 3.5 I think it is best to revert this for now. There could be
other cases that rely on the current although wrong behavior. I will
post an updated version for 3.6."
Bisected-and-reported-by: Meelis Roos <mroos@linux.ee>
Requested-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch does the following:
-const int of_get_nand_ecc_mode(struct device_node *np)
+int of_get_nand_ecc_mode(struct device_node *np)
because:
1. it is probably just a typo?
2. it causes warnings like this when people assing the returned
value to an 'int' variable:
include/linux/of_mtd.h:14:18: warning: type qualifiers ignored on functi=
on return type [-Wignored-qualifiers]
Remove also the unnecessary "extern" qualifier to be consistent with other
declarations in this file.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Sometimes it doesn't make any sense for a node to have an address.
In this case device lookup will always be unsuccessful because we
currently assume every node will have a reg property. This patch
changes the semantics so that the resource address and the lookup
address will only be compared if one exists.
Things like AUXDATA() rely on of_dev_lookup to return the lookup
entry of a particular device in order to do things like apply
platform_data to a device. However, this is currently broken for
nodes which do not have a reg property, meaning that platform_data
can not be passed in those cases.
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The pattern (np ? np->full_name : "<none>") is rather common in the
kernel, but can also make for quite long lines. This patch adds a new
inline function, of_node_full_name() so that the test for a valid node
pointer doesn't need to be open coded at all call sites.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Make of_parse_phandle_with_args return -ENOENT instead of -EINVAL when
no matching property is found, which allows to discriminate between
absence of property and parsing error.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Fixes the following sparse warnings:
drivers/of/base.c:176:41: warning: Using plain integer as NULL pointer
drivers/of/base.c:178:37: warning: Using plain integer as NULL pointer
drivers/of/base.c:500:49: warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Define two new "compatible" values for Ethernet
PHYs. "ethernet-phy-ieee802.3-c22" and "ethernet-phy-ieee802.3-c45"
are used to indicate a PHY uses the corresponding protocol.
If a PHY is "compatible" with "ethernet-phy-ieee802.3-c45", we
indicate this so that get_phy_device() can properly probe the device.
If get_phy_device() fails, it was probably due to failing the probe of
the PHY identifier registers. Since we have the device tree telling
us the PHY exists, go ahead and add it anyhow with a phy_id of zero.
There may be a driver match based on the "compatible" property.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IEEE802.3 clause 45 MDIO bus protocol allows for directly
addressing PHY registers using a 21 bit address, and is used by many
10G Ethernet PHYS. Already existing is the ability of MDIO bus
drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add
struct phy_c45_device_ids to hold the device identifier registers
present in clause 45. struct phy_device gets a couple of new fields:
c45_ids to hold the identifiers and is_c45 to signal that it is clause
45.
get_phy_device() gets a new parameter is_c45 to indicate that the PHY
device should use the clause 45 protocol, and its callers are adjusted
to pass false. The follow-on patch to of_mdio.c will pass true where
appropriate.
EXPORT phy_device_create() so that the follow-on patch to of_mdio.c
can use it to create phy devices for PHYs, that have non-standard
device identifier registers, based on the device tree bindings.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When matching devices against an OF device ID table, the first string of
the compatible property that is listed in the table should match,
regardless of its position in the table.
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Without this, modules can't use this API, leading to build failures.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Pull MIPS updates from Ralf Baechle:
"The whole series has been sitting in -next for quite a while with no
complaints. The last change to the series was before the weekend the
removal of an SPI patch which Grant - even though previously acked by
himself - appeared to raise objections. So I removed it until the
situation is clarified. Other than that all the patches have the acks
from their respective maintainers, all MIPS and x86 defconfigs are
building fine and I'm not aware of any problems introduced by this
series.
Among the key features for this patch series is a sizable patchset for
Lantiq which among other things introduces support for Lantiq's
flagship product, the FALCON SOC. It also means that the opensource
developers behind this patchset have overtaken Lantiq's competing
inhouse development team that was working behind closed doors.
Less noteworthy the ath79 patchset which adds support for a few more
chip variants, cleanups and fixes. Finally the usual dose of tweaking
of generic code."
Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
MIPS: lantiq: remove orphaned code
MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
MIPS: lantiq: implement support for FALCON soc
MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
MTD: MIPS: lantiq: implement OF support
watchdog: MIPS: lantiq: implement OF support and minor fixes
SERIAL: MIPS: lantiq: implement OF support
GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
MIPS: pci: convert lantiq driver to OF
MIPS: lantiq: convert dma to platform driver
MIPS: lantiq: implement support for clkdev api
MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
OF: MIPS: lantiq: implement irq_domain support
OF: MIPS: lantiq: implement OF support
MIPS: lantiq: drop mips_machine support
OF: PCI: const usage needed by MIPS
MIPS: Cavium: Remove smp_reserve_lock.
MIPS: Move cache setup to setup_arch().
...
|
|
Pull i2c-embedded changes from Wolfram Sang:
"Major changes:
- lots of devicetree additions for existing drivers. I tried hard to
make sure the bindings are proper. In more complicated cases, I
requested acks from people having more experience with them than
me. That took a bit of extra time and also some time went into
discussions with developers about what bindings are and what not.
I have the feeling that the workflow with bindings should be
improved to scale better. I will spend some more thought on
this...
- i2c-muxes are succesfully used meanwhile, so we dropped
EXPERIMENTAL for them and renamed the drivers to a standard pattern
to match the rest of the subsystem. They can also be used with
devicetree now.
- ixp2000 was removed since the whole platform goes away.
- cleanups (strlcpy instead of strcpy, NULL instead of 0)
- The rest is typical driver fixes I assume.
All patches have been in linux-next at least since v3.4-rc6."
Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.
* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
i2c: davinci: Free requested IRQ in remove
i2c: ocores: register OF i2c devices
i2c: tegra: notify transfer-complete after clearing status.
I2C: xiic: Add OF binding support
i2c: Rename last mux driver to standard pattern
i2c: tegra: fix 10bit address configuration
i2c: muxes: rename first set of drivers to a standard pattern
of/i2c: implement of_find_i2c_adapter_by_node
i2c: implement i2c_verify_adapter
i2c-s3c2410: Add HDMIPHY quirk for S3C2440
i2c-s3c2410: Rework device type handling
i2c: muxes are not EXPERIMENTAL anymore
i2c/of: Automatically populate i2c mux busses from device tree data.
i2c: Add a struct device * parameter to i2c_add_mux_adapter()
of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
i2c: designware: Add clk_{un}prepare() support
i2c: designware: add PM support
i2c: ixp2000: remove driver
i2c: pnx: add device tree support
i2c: imx: don't use strcpy but strlcpy
...
|
|
Pull GPIO driver changes from Grant Likely:
"Lots of gpio changes, both to core code and drivers.
Changes do touch architecture code to remove the need for separate
arm/gpio.h includes in most architectures.
Some new drivers are added, and a number of gpio drivers are converted
to use irq_domains for gpio inputs used as interrupts. Device tree
support has been amended to allow multiple gpio_chips to use the same
device tree node.
Remaining changes are primarily bug fixes."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
gpio/generic: initialize basic_mmio_gpio shadow variables properly
gpiolib: Remove 'const' from data argument of gpiochip_find()
gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
gpiolib: quiet gpiochip_add boot message noise
gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
gpio/lpc32xx: Add device tree support
gpio: Adjust of_xlate API to support multiple GPIO chips
gpiolib: Implement devm_gpio_request_one()
gpio-mcp23s08: dbg_show: fix pullup configuration display
Add support for TCA6424A
gpio/omap: (re)fix wakeups on level-triggered GPIOs
gpio/omap: fix broken context restore for non-OFF mode transitions
gpio/omap: fix missing check in *_runtime_suspend()
gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
gpio/omap: remove suspend/resume callbacks
gpio/omap: remove retrigger variable in gpio_irq_handler
gpio/omap: remove saved_wakeup field from struct gpio_bank
gpio/omap: remove suspend_wakeup field from struct gpio_bank
gpio/omap: remove saved_fallingdetect, saved_risingdetect
gpio/omap: remove virtual_irq_start variable
...
Conflicts:
drivers/gpio/gpio-samsung.c
|
|
Pull SPI changes from Grant Likely:
"Bug fixes and new features for SPI device drivers. Also move device
tree support code out of drivers/of and into drivers/spi/spi.c where
it makes more sense."
* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
spi: By default setup spi_masters with 1 chipselect and dynamics bus number
SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors
spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control
spi: refactor spi-coldfire-qspi to use SPI queue framework.
spi/omap2-mcspi: convert to the pump message infrastructure
spi/rspi: add dmaengine support
spi/topcliff: use correct __devexit_p annotation
spi: Dont call prepare/unprepare transfer if not populated
spi/ep93xx: clean probe/remove routines
spi/devicetree: Move devicetree support code into spi directory
spi: use module_pci_driver
spi/omap2-mcspi: Trivial optimisation
spi: omap2-mcspi: add support for pm_runtime autosuspend
spi/omap: Remove bus_num usage for instance index
OMAP : SPI : use devm_* functions
spi: omap2-mcspi: convert to module_platform_driver
spi: omap2-mcspi: make it behave as a module
|
|
Pull device tree conversions for arm-soc, part 1, from Olof Johansson:
"The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game
of booting using device trees, which is a great step forward for them.
at91 and spear have pretty much completed this process with a huge
amount of work being put into at91. The other platforms are
continuing the process.
We finally start to see the payback on this investment, as new
machines are getting supported purely by adding a .dts source file
that can be completely independent of the kernel source."
Fix up trivial conflict in arch/arm/Kconfig
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files
arm/dts: omap4-panda: Add LEDs support
arm/dts: omap4-sdp: Add LEDs support
arm/dts: twl4030: Add twl4030-gpio node
OMAP4: devices: Do not create mcpdm device if the dtb has been provided
OMAP4: devices: Do not create dmic device if the dtb has been provided
Documentation: update docs for mmp dt
ARM: dts: refresh dts file for arch mmp
ARM: mmp: support pxa910 with device tree
ARM: mmp: support mmp2 with device tree
gpio: pxa: parse gpio from DTS file
ARM: mmp: support DT in timer
ARM: mmp: support DT in irq
ARM: mmp: append CONFIG_MACH_MMP2_DT
ARM: mmp: fix build issue on mmp with device tree
ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree
ARM: ux500: Disable SMSC911x platform code registration when DT is enabled
ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement
ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball
ARM: SPEAr3xx: Correct keyboard data passed from DT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control subsystem changes from Linus Walleij:
- Generic Device Tree bindings and hooks for drivers so we can move
over modern drivers to using this.
- Device Tree bindings for Tegra SoCs.
- Funneling some devicetree helper code for the drivers/of subsystem.
- New pin control drivers for:
* Freescale MXS
* Freescale i.MX51
* Freescale i.MX53
All of these use Device Tree bindings.
- Dummy pinctrl handles for stepwise migration to pinctrl, akin to
dummy regulators.
- Minor non-urgent fixes and improvments.
Fix up trivial conflicts in Documentation/driver-model/devres.txt and
drivers/pinctrl/core.c,
* tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (46 commits)
pinctrl: pinctrl-imx: add imx51 pinctrl driver
pinctrl: pinctrl-imx: add imx53 pinctrl driver
pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function
pinctrl: pinctrl-mxs: remove empty pinmux disable function
pinctrl: pinctrl-imx: remove empty pinmux disable function
pinctrl: make pinmux disable function optional
pinctrl: a minor error checking improvement for pinconf
pinctrl: mxs: skip gpio nodes for group creation
pinctrl: mxs: create group for pin config node
pinctrl: (cosmetic) fix two entries in DocBook comments
pinctrl: add more info to error msgs in pin_request
pinctrl: add pinctrl-mxs support
pinctrl: pinctrl-imx: add imx6q pinctrl driver
pinctrl: pinctrl-imx: add imx pinctrl core driver
dt: add of_get_child_count helper function
pinctrl: support gpio request deferred probing
pinctrl: add pinctrl_provide_dummies interface for platforms to use
pinctrl: enhance reporting of errors when loading from DT
pinctrl: add kerneldoc for pinctrl_ops device tree functions
pinctrl: propagate map validation errors
...
|
|
On MIPS we want to call of_irq_map_pci from inside
arch/mips/include/asm/pci.h:extern int pcibios_map_irq(
const struct pci_dev *dev, u8 slot, u8 pin);
For this to work we need to change several functions to const usage.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-pci@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-mips@linux-mips.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: https://patchwork.linux-mips.org/patch/3710/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This finds the struct i2c_adapter * for a given device tree node. Just
like of_find_i2c_device_by_node.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
|
|
i2c_bus_type may contain both I2C clients and I2C adapters. Fix
of_find_i2c_device_by_node to call i2c_verify_client to ensure that it
only returns non-NULL of I2C clients.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
|
|
Linux 3.4-rc6
|
|
Add of_mdio_find_bus() which allows an mii_bus to be located given its
associated the device tree node.
This is needed by the follow-on patch to add a driver for MDIO bus
multiplexers.
The of_mdiobus_register() function is modified so that the device tree
node is recorded in the mii_bus. Then we can find it again by
iterating over all mdio_bus_class devices.
Because the OF device tree has now become an integral part of the
kernel, this can live in mdio_bus.c (which contains the needed
mdio_bus_class structure) instead of of_mdio.c.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The register and irq definitions in mach/*.h for spear3xx and
spear6xx are now mostly obsolete, after the platforms have been
converted to device tree based probing and the data is now
part of the device tree files.
The misc_regs.h contents are moved into clock.c because that is
the only user, aside from the DMA_CHN_CFG that should eventually
get handled differently. Some of the contents of mach/spear.h
still remain, because they are used to set up the static map table,
timer, uart and auxdata tables, but almost everything got removed.
We might remove everything but the map table as the DT conversion
completes, but that is not a priority. I've also made sure to
make both copies of spear.h more or less identical so we can
eventually combine them.
The spear3?0.h files were only used by the spear3?0.c files, so I
merged the contents in there and removed the bits that were unused.
This is something that should still be looked at.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
|
|
This patch adds macros of_property_for_each_u32() and
of_property_for_each_string(), which iterate over an array of values
within a device-tree property. Usage is for example:
struct property *prop;
const __be32 *p;
u32 u;
of_property_for_each_u32(np, "propname", prop, p, u)
printk("U32 value: %x\n", u);
struct property *prop;
const char *s;
of_property_for_each_string(np, "propname", prop, s)
printk("String value: %s\n", s);
Based on work by Rob Herring <robherring2@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The SPI device tree support code isn't shared by any other subsystem. It can
be moved into the core drivers/spi directory and the exported symbol can be
removed.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
|
