summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)Author
2008-12-29x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.hJaswinder Singh Rajput
Impact: cleanup Now that arch/x86/pci/pci.h is used in a number of other places as well, move the lowlevel x86 pci definitions into the architecture include files. (not to be confused with the existing arch/x86/include/asm/pci.h file, which provides public details about x86 PCI) Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-28Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-17PCI hotplug: ibmphp: Fix module ref count underflowNeil Horman
I happened to notice that the ibmphp hotplug driver does something rather silly in its init routine. It purposely calls module_put so as to underflow its module ref count to avoid being removed from the kernel. This is bad practice, and wrong, since it provides a window for subsequent module_gets to reset the refcount to zero, allowing an unload to race in and cause all sorts of mysterious panics. If the module is unsafe to load, simply omitting the module_exit parameter is sufficient to prevent the kernel from allowing the unload. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-12-16PCI hotplug: acpiphp wants a 64-bit _SUNJustin Chen
Certain HP machines require the full 64 bits of _SUN as allowed by the ACPI spec. Without this change, we get name collisions in the lower 32 bits of the _SUN returned by firmware. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Justin Chen <justin.chen@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-12-16PCI: pciehp: fix unexpected power off with pciehp_forceKenji Kaneshige
This patch fixes the problem that causes an occupied slot to be turned off even if it has a working device. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-06powerpc/pci: Fix various pseries PCI hotplug issuesBenjamin Herrenschmidt
The pseries PCI hotplug code has a number of issues, ranging from incorrect resource setup to crashes, depending on what is added, when, whether it contains a bridge, etc etc.... This fixes a whole bunch of these, while actually simplifying the code a bit, using more generic code in the process and factoring out common code between adding of a PHB, a slot or a device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-23Fix PCI hotplug printk formatRandy Dunlap
Fix printk format warning: drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23PCI hotplug: shpchp: message refinementTaku Izumi
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: replace printk with dev_printkTaku Izumi
This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: pciehp: message refinementTaku Izumi
This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: cpqphp: fix kernel NULL pointer dereferenceKenji Kaneshige
The following patch fixes the regression in 2.6.27 that causes kernel NULL pointer dereference at cpqphp driver probe time. This patch should be backported to the .27 stable series. Seems to have been introduced by f46753c5e354b857b20ab8e0fe7b2579831dc369. The root cause of this problem seems that cpqphp driver calls pci_hp_register() wrongly. In current implementation, cpqphp driver passes 'ctrl->pci_dev->subordinate' as a second parameter for pci_hp_register(). But because hotplug slots and it's hotplug controller (exists as a pci funcion) are on the same bus, it should be 'ctrl->pci_dev->bus' instead. Cc: <stable@kernel.org> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits) dock: make dock driver not a module ACPI: fix ia64 build warning ACPI: hack around sysfs warning with link order ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n intel_menlo: fix build warning panasonic-laptop: fix build ACPICA: Update version to 20080926 ACPICA: Add support for zero-length buffer-to-string conversions ACPICA: New: Validation for predefined ACPI methods/objects ACPICA: Fix for implicit return compatibility ACPICA: Fixed a couple memory leaks associated with "implicit return" ACPICA: Optimize buffer allocation procedure ACPICA: Fix possible memory leak, error exit path ACPICA: Fix fault after mem allocation failure in AML parser ACPICA: Remove unused ACPI register bit definition ACPICA: Update version to 20080829 ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname ACPICA: Cleanup for internal Reference Object ACPICA: Update comments - no functional changes ACPICA: Update for Reference ACPI_OPERAND_OBJECT ...
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ull' into testLen Brown
Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22PCI hotplug: fix logic in Compaq hotplug controller bus speed setupJulia Lawall
The pattern !E && !E->fld is nonsensical. The patch below updates this according to the assumption that && should be ||. But perhaps another solution was intended. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @disable and_comm@ expression E; identifier fld; @@ - !E && !E->fld + !E || !E->fld // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI hotplug: pciehp: poll data link layer link activeKenji Kaneshige
This patch adds polling mechanism for Data Link Layer Link Active bit after turning power on, instead of waiting for 1000 msec. This reduces reduce the unnecessary long wait. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI hotplug: pciehp: fix possible memory leak in pcie_initKenji Kaneshige
Fix the error paths in pcie_init to avoid leaking memory. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: fakephp: add duplicate slot name debuggingAlex Chiang
The PCI core now manages slot names on behalf of slot detection and slot hotplug drivers, including the handling of duplicate slot names. We can use the fakephp driver to help test the new functionality. Add a 'dup_slots' module param to force fakephp to create multiple slots with the same name. We can then verify that the PCI core correctly renamed the slots. sapphire:/sys/bus/pci/slots # modprobe fakephp dup_slots sapphire:/sys/bus/pci/slots # ls fake fake-10 fake-3 fake-5 fake-7 fake-9 fake-1 fake-2 fake-4 fake-6 fake-8 Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Hotplug core: remove 'name'Alex Chiang
Now that the PCI core manages the 'name' for each individual hotplug driver, and all drivers (except rpaphp) have been converted to use hotplug_slot_name(), there is no need for the PCI hotplug core to drag around its own copy of name either. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: shcphp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from shpchp's version of struct slot. This change also removes the unused struct task_event from the slot structure. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: SGI Hotplug: stop managing bss_hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Update the sn_hp_slot_private_alloc() interface to fill in the correct name for us, as that function already has all the parameters needed to determine the name. Cc: kristen.c.accardi@intel.com Cc: jpk@sgi.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: rpaphp: kmalloc/kfree slot->name directlyAlex Chiang
rpaphp tends to use slot->name directly everywhere, and doesn't ever need slot->hotplug_slot->name. struct hotplug_slot->name is going away, so convert rpaphp directly manipulate its own slot->name everywhere, and don't bother touching slot->hotplug_slot->name. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: pciehp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from pciehp's version of struct slot, and remove unused 'task_list' as well. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: ibmphp: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Additionally, slightly rearrange the members of struct slot so they are naturally aligned to eliminate holes. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: fakephp: remove 'name' parameterAlex Chiang
Remove 'name' from fakephp's struct dummy_slot, as the PCI core will now manage our slot name for us. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpqphp: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpci_hotplug: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: kristen.c.accardi@intel.com Cc: scottm@somanetworks.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: acpiphp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from acpiphp's version of struct slot. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: prevent duplicate slot namesAlex Chiang
Prevent callers of pci_create_slot() from registering slots with duplicate names. This condition occurs most often when PCI hotplug drivers are loaded on platforms with broken firmware that assigns identical names to multiple slots. We now rename these duplicate slots on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 etc. This is the permanent fix mentioned in earlier commits d6a9e9b4 and 167e782e (shpchp/pciehp: Rename duplicate slot name...). We take advantage of the new 'hotplug' parameter in pci_create_slot() to prevent a slot create/rename race between hotplug drivers and detection drivers. Scenario A: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=NULL) The hotplug driver creates the slot with its desired name, and then releases the semaphore. Now, the detection driver tries to create the same slot, but it already exists. We don't care about renaming, so return the existing slot. Scenario B: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=NULL) pci_create_slot(hotplug=set) The detection driver creates the slot with name "X". Then the hotplug driver tries to create the same slot, but wants the name "Y" instead. We detect that we're trying to create the same slot and that we also want a rename, so rename the slot to "Y" and return. Scenario C: hotplug driver hotplug driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=set) Two separate hotplug drivers are attempting to claim the slot and are passing valid hotplug_slot args to pci_create_slot(). We detect that the slot already has a ->hotplug callback, prevent a rename, and return -EBUSY. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: serialize pci_hp_register and pci_hp_deregisterKenji Kaneshige
Convert the pci_hotplug_slot_list_lock, which only protected the list of hotplug slots, to a pci_hp_mutex which now protects both interfaces. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: update pci_create_slot() to take a 'hotplug' paramAlex Chiang
Slot detection drivers can co-exist with hotplug drivers. The names of the detected/claimed slots may be different depending on module load order. For legacy reasons, we need to allow hotplug drivers to override the slot name if a detection driver is loaded first (and they find the same slots). Creating and overriding slot names should be an atomic operation, otherwise you get a locking nightmare as various drivers race to call pci_create_slot(). pci_create_slot() is already serialized by grabbing the pci_bus_sem. We update the API and add a 'hotplug' param, which is: set if the caller is a hotplug driver NULL if the caller is a detection driver pci_create_slot() does not actually use the 'hotplug' parameter in this patch. A later patch will add the logic that uses it. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug core: add 'name' param pci_hp_register interfaceAlex Chiang
Update pci_hp_register() to take a const char *name parameter. The motivation for this is to clean up the individual hotplug drivers so that each one does not have to manage its own name. The PCI core should be the place where we manage the name. We update the interface and all callsites first, in a "no functional change" manner, and clean up the drivers later. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI hotplug: fix get_##name return value problemKenji Kaneshige
The commit 356a9d6f3dd283f83861adf1ac909879f0e66411 (PCI: fix hotplug get_##name return value problem) doesn't seem to be merged properly. Because of this, PCI hotplug no longer works (Read/Write PCI hotplug files always returns -ENODEV). This patch fixes wrong check of try_module_get() return value check in get_##name(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI hotplug: rpaphp: make debug var uniqueKristen Carlson Accardi
Change debug variable name to one more unique to this driver. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: fix hotplug get_##name return value problemZhao, Yu
Currently, get_##name in pci_hotplug_core.c will return 0 if module unload wins the race between unload & reading the hotplug file. Fix that case to return -ENODEV like it should. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: pciehp: replace printk with dev_printkTaku Izumi
This patch replaces printks within pciehp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: pciehp: change name tag of "hpdriver_portdrv" variableTaku Izumi
I think an appropriate name tag of "hpdriver_portdrv" variable is "pciehp" rather than "hpdriver". Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: pciehp: fix irq initializationKenji Kaneshige
Current pciehp driver gets irq number from pci_dev->irq. But because pciehp driver is a pci express port service driver, it should get irq number from pcie_device->irq. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: ibmphp: list_for_each to list_for_each_entry-checkpatch cleanupsakpm@linux-foundation.org
Please run checkpatch prior to sending patches, this one fixes several style issues with the list_for_each conversion patch. Cc: Cordelia Sam <cordesam@gmail.com> Cc: Cordelia Sam <cordsam@linux.vnet.ibm.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: ibmphp: list_for_each to list_for_each_entryakpm@linux-foundation.org
Make code more readable with list_for_each_entry(). Signed-off-by: Cordelia Sam <cordesam@gmail.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-16Merge branch 'core-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually.
2008-10-15Merge branches 'core/softlockup', 'core/softirq', 'core/resources', ↵Ingo Molnar
'core/printk' and 'core/misc' into core-v28-for-linus
2008-10-15Merge commit 'origin'Benjamin Herrenschmidt
Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-26x86, pci-hotplug, calgary / rio: fix EBDA ioremap()Ingo Molnar
IO resource and ioremap debugging uncovered this ioremap() done by drivers/pci/hotplug/ibmphp_ebda.c: initcall pci_hotplug_init+0x0/0x41 returned 0 after 3 msecs calling ibmphp_init+0x0/0x360 @ 1 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 resource map sanity check conflict: 0x9f800 0xaf5e7 0x9f800 0x9ffff reserved ------------[ cut here ]------------ WARNING: at arch/x86/mm/ioremap.c:175 __ioremap_caller+0x5c/0x226() Pid: 1, comm: swapper Not tainted 2.6.27-rc7-tip-00914-g347b10f-dirty #36038 [<c013a72d>] warn_on_slowpath+0x41/0x68 [<c0156f00>] ? __lock_acquire+0x9ba/0xa7f [<c012158c>] ? do_flush_tlb_all+0x0/0x59 [<c015ac31>] ? smp_call_function_mask+0x74/0x17d [<c012158c>] ? do_flush_tlb_all+0x0/0x59 [<c013b228>] ? printk+0x1a/0x1c [<c013f302>] ? iomem_map_sanity_check+0x82/0x8c [<c0a773e8>] ? _read_unlock+0x22/0x25 [<c013f302>] ? iomem_map_sanity_check+0x82/0x8c [<c0154e17>] ? trace_hardirqs_off+0xb/0xd [<c0127731>] __ioremap_caller+0x5c/0x226 [<c0156158>] ? trace_hardirqs_on+0xb/0xd [<c012767d>] ? iounmap+0x9d/0xa5 [<c01279dd>] ioremap_nocache+0x15/0x17 [<c0403c42>] ? ioremap+0xd/0xf [<c0403c42>] ioremap+0xd/0xf [<c0f1928f>] ibmphp_access_ebda+0x60/0xa0e [<c0f17f64>] ibmphp_init+0xb5/0x360 [<c0101057>] do_one_initcall+0x57/0x138 [<c0f17eaf>] ? ibmphp_init+0x0/0x360 [<c0156158>] ? trace_hardirqs_on+0xb/0xd [<c0148d75>] ? __queue_work+0x2b/0x30 [<c0f17eaf>] ? ibmphp_init+0x0/0x360 [<c0f015a0>] kernel_init+0x17b/0x1e2 [<c0f01425>] ? kernel_init+0x0/0x1e2 [<c01178b3>] kernel_thread_helper+0x7/0x10 ======================= ---[ end trace a7919e7f17c0a725 ]--- initcall ibmphp_init+0x0/0x360 returned -19 after 144 msecs calling zt5550_init+0x0/0x6a @ 1 the problem is this code: io_mem = ioremap (ebda_seg<<4, 65000); it assumes that the EBDA is 65000 bytes. But BIOS EBDA pointers are at most 1K large. _if_ the Rio code truly extends upon the customary EBDA size it needs to iounmap() this memory and ioremap() it larger, once it knows it from the generic descriptors that a Rio system is around. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23dock: introduce .uevent for devices in dock, eg libataShaohua Li
dock's uevent reported itself, not ata. It might be difficult to find an ata device just according to a dock. This patch introduces docking ops for each device in a dock. when docking, dock driver can send device specific uevent. This should help dock station too (not just bay) Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-10PCI: fix pciehp_free_irq()Adrian Bunk
This patch fixes an obvious bug (loop was never entered) caused by commit 820943b6fc4781621dee52ba026106758a727dd3 (pciehp: cleanup pcie_poll_cmd). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-10Merge branch 'linux-2.6'Paul Mackerras
2008-09-09PCI Hotplug: fakephp: fix deadlock... againAlex Chiang
Commit fe99740cac117f208707488c03f3789cf4904957 (construct one fakephp slot per PCI slot) introduced a regression, causing a deadlock when removing a PCI device. We also never actually removed the device from the PCI core. So we: - remove the device from the PCI core - do not directly call remove_slot() to prevent deadlock Yu Zhao reported and diagnosed this defect. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Yu Zhao <yu.zhao@intel.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-21PCI: shpchp: Rename duplicate slot name N as N-1, N-2, N-M...Alex Chiang
Commit ef0ff95f136f0f2d035667af5d18b824609de320 (shpchp: fix slot name) introduces the shpchp_slot_with_bus module parameter, which was intended to help work around broken firmware that assigns the same name to multiple slots. Commit b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a (shpchp: add message about shpchp_slot_with_bus option) tells the user to use the above parameter in the event of a name collision. This approach is sub-optimal because it requires too much work from the user. Instead, let's rename the slot on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 The Mth registered slot becomes N-M In the event we overflow the slot->name parameter, we report an error to the user. This is a temporary fix until the entire PCI core can be reworked such that individual drivers no longer have to manage their own slot names. Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 06:41:49 +0000