summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie/aer
AgeCommit message (Collapse)Author
2014-06-23trace, AER: Move trace into unified interfaceChen, Gong
AER uses a separate trace interface by now. To make it consistent, move it into unified RAS trace interface. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-10PCI: Merge multi-line quoted stringsRyan Desfosses
Merge quoted strings that are broken across lines into a single entity. The compiler merges them anyway, but checkpatch complains about it, and merging them makes it easier to grep for strings. No functional change. [bhelgaas: changelog, do the same for everything under drivers/pci] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-10PCI: Whitespace cleanupRyan Desfosses
Fix various whitespace errors. No functional change. [bhelgaas: fix other similar problems] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0Betty Dall
In the discussion for this set of patches [link below], Bjorn Helgaas pointed out that the ACPI HEST AER error sources do not have the PCIe segment number associated with the bus. I worked with the ACPI spec and got this change to definition of the "Bus" field into the recently released ACPI Spec 5.0a section 18.3.2.3-5: Identifies the PCI Bus and Segment of the device. The Bus is encoded in bits 0-7. For systems that expose multiple PCI segment groups, the segment number is encoded in bits 8-23 and bits 24-31 must be zero. For systems that do not expose multiple PCI segment groups, bits 8-31 must be zero. If the GLOBAL flag is specified, this field is ignored. This patch makes use of the new definition in the only place in the kernel that uses the acpi_hest_aer_common's bus field. This depends on 36f3615152c1 ("ACPICA: Add helper macros to extract bus/segment numbers from HEST table.") Link: http://lkml.kernel.org/r/1370542251-27387-1-git-send-email-betty.dall@hp.com Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/AER: Consolidate HEST error source parsersBjorn Helgaas
aer_hest_parse() and aer_hest_parse_aff() are almost identical. We use aer_hest_parse() to check the ACPI_HEST_FIRMWARE_FIRST flag for a specific device, and we use aer_hest_parse_aff() to check to see if any device sets the flag. This drops aer_hest_parse_aff() and enhances aer_hest_parse() so it collects the union of the PCIe ACPI_HEST_FIRMWARE_FIRST flag settings when no specific device is supplied. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Betty Dall <betty.dall@hp.com>
2013-12-13PCI/AER: Ignore non-PCIe AER error sources in aer_hest_parse()Betty Dall
aer_set_firmware_first() searches the HEST for an error source descriptor matching the specified PCI device. It uses the apei_hest_parse() iterator to call aer_hest_parse() for every descriptor in the HEST. Previously, aer_hest_parse() incorrectly assumed every descriptor was for a PCIe error source. This patch adds a check to avoid that error. [bhelgaas: factor check into helper, use in aer_hest_parse_aff(), changelog] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/AER: Clean up error printing code a bitBorislav Petkov
Save one indentation level in aer_print_error() for the generic case where we have info->status of an error, disregard 80 cols rule a bit for the sake of better readability, fix alignment. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI/AER: Add a TLP header print helperBorislav Petkov
... and call it instead of duplicating the large printk format statement. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-22Merge tag 'pci-v3.13-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Miscellaneous - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu) - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)" * tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove() PCI: Fix whitespace, capitalization, and spelling errors
2013-11-15kfifo API type safetyStefani Seibold
This patch enhances the type safety for the kfifo API. It is now safe to put const data into a non const FIFO and the API will now generate a compiler warning when reading from the fifo where the destination address is pointing to a const variable. As a side effect the kfifo_put() does now expect the value of an element instead a pointer to the element. This was suggested Russell King. It make the handling of the kfifo_put easier since there is no need to create a helper variable for getting the address of a pointer or to pass integers of different sizes. IMHO the API break is okay, since there are currently only six users of kfifo_put(). The code is also cleaner by kicking out the "if (0)" expressions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14PCI: Remove aer_do_secondary_bus_reset()Alex Williamson
One PCI bus reset function to rule them all. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-03Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
2013-06-06PCI/AER: Reset link for devices below Root Port or Downstream PortBetty Dall
When a PCIe device reports a fatal error, we reset the link leading to it. Previously we only did this for devices below Downstream Ports, not for devices directly below Root Ports. This patch changes that so we reset the link leading to devices below Root Ports just like we do for those below Downstream Ports. [bhelgaas: changelog, keep dev_printk(KERN_DEBUG)] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Move AER severity defines to aer.hBetty Dall
The function aer_recover_queue() is a public interface and the severity argument uses #defines that are in the private header pci/pcie/aer/aerdrv.h. This patch moves the #defines from pci/pcie/aer/aerdrv.h to include/linux/aer.h. [bhelgaas: split "remove 'extern' from declarations" to another patch] Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Set dev->__aer_firmware_first only for matching devicesBjorn Helgaas
Previously, we always updated info->firmware_first, even for HEST entries that didn't match the device. Therefore, if the last HEST descriptor was a PCIe structure that didn't match the device, we always cleared dev->__aer_firmware_first. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Factor out HEST device type matchingBjorn Helgaas
This factors out the matching of HEST structure type and PCIe device type to improve readability. No functional change. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06PCI/AER: Don't parse HEST table for non-PCIe devicesBjorn Helgaas
AER is a PCIe-only capability, so there's no point in trying to match a HEST PCIe structure with a non-PCIe device. Previously, a HEST global AER bridge entry (type 8) could incorrectly match *any* bridge, even a legacy PCI-PCI bridge, and a non-global HEST entry could match a legacy PCI device. Tested-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-30aerdrv: Move cper_print_aer() call out of interrupt contextLance Ortiz
The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-04-17Merge branch 'pci/cleanup' into nextBjorn Helgaas
* pci/cleanup: PCI: Remove "extern" from function declarations PCI: Warn about failures instead of "must_check" functions PCI: Remove __must_check from definitions PCI: Remove unused variables PCI: Move cpci_hotplug_init() proto to header file PCI: Make local functions/structs static PCI: Fix missing prototype for pcie_port_acpi_setup() Conflicts: drivers/pci/hotplug/acpiphp.h include/linux/pci.h
2013-04-17PCI: Remove "extern" from function declarationsBjorn Helgaas
We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-15Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Clean up quirk_io_region PCI: Use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT PCI: Use PCI_EXP_SLTCAP_PSN mask when extracting slot number PCI: Remove unnecessary dependencies between PME and ACPI [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b [SCSI] mvsas: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b PCI: Define macro for Marvell vendor ID PCI: Add MSI INTX_DISABLE quirks for AR8161/AR8162/AR8171/AR8172/E210X PCI: aer_inject: Fix return values when device not found
2013-04-12PCI: Make local functions/structs staticBjorn Helgaas
This fixes "no previous prototype" warnings found via "make W=1". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-03PCI: aer_inject: Fix return values when device not foundPrarit Bhargava
Currently the aer_inject driver returns -ENOTTY when the target PCIe device root port is not found or if the device or root port doesn't support AER. In the case where the root port isn't found, the driver should return -ENODEV, and in the other cases it should return -EPERM. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-03-26PCI/AER: Remove local PCI_BUS() define and use PCI_BUS_NUM() from PCIShuah Khan
Change to remove local PCI_BUS() define and use the new PCI_BUS_NUM() interface from PCI. Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <joro@8bytes.org>
2013-01-24Merge tag 'please-pull-aer-trace' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into perf/core Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-13PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put()Betty Dall
The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall <betty.dall@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Shuah Khan <shuah.khan@hp.com> CC: stable@vger.kernel.org
2013-01-03aerdrv: Cleanup log output for AERLance Ortiz
These changes make cper_print_aer more consistent with aer_print_error and clean things up by elimiating the use of the prefix variable and replacing it with dev_printk. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Boris Petkov <bp@alien8.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-01-03aerdrv: Enhanced AER loggingLance Ortiz
This patch will provide a more reliable and easy way for user-space applications to have access to AER logs rather than reading them from the message buffer. It also provides a way to notify user-space when an AER event occurs. The aer driver is updated to generate a trace event of function 'aer_event' when a PCIe error is reported over the AER interface. The trace event was added to both the interrupt based aer path and the firmware first path. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Boris Petkov <bp@alien8.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-11-28PCI: Remove __dev* markingsBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p, __devint, __devinitdata, __devinitconst, and _devexit are no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI/AER: Report success only when every device has AER-aware driver Conflicts: drivers/pci/pcie/aer/aerdrv_core.c
2012-11-26PCI/AER: Report success only when every device has AER-aware driverVijay Mohan Pandarathil
When an error is detected on a PCIe device which does not have an AER-aware driver, prevent AER infrastructure from reporting successful error recovery. This is because the report_error_detected() function that gets called in the first phase of recovery process allows forward progress even when the driver for the device does not have AER capabilities. It seems that all callbacks (in pci_error_handlers structure) registered by drivers that gets called during error recovery are not mandatory. So the intention of the infrastructure design seems to be to allow forward progress even when a specific callback has not been registered by a driver. However, if error handler structure itself has not been registered, it doesn't make sense to allow forward progress. As a result of the current design, in the case of a single device having an AER-unaware driver or in the case of any function in a multi-function card having an AER-unaware driver, a successful recovery is reported. Typical scenario this happens is when a PCI device is detached from a KVM host and the pci-stub driver on the host claims the device. The pci-stub driver does not have error handling capabilities but the AER infrastructure still reports that the device recovered successfully. The changes proposed here leaves the device(s)in an unrecovered state if the driver for the device or for any device in the subtree does not have error handler structure registered. This reflects the true state of the device and prevents any partial recovery (or no recovery at all) reported as successful. [bhelgaas: changelog] Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linas Vepstas <linasvepstas@gmail.com> Reviewed-by: Myron Stowe <myron.stowe@redhat.com>
2012-11-02PCI/PM: Fix deadlock when unbinding device if parent in D3coldHuang Ying
If a PCI device and its parents are put into D3cold, unbinding the device will trigger deadlock as follow: - driver_unbind - device_release_driver - device_lock(dev) <--- previous lock here - __device_release_driver - pm_runtime_get_sync ... - rpm_resume(dev) - rpm_resume(dev->parent) ... - pci_pm_runtime_resume ... - pci_set_power_state - __pci_start_power_transition - pci_wakeup_bus(dev->parent->subordinate) - pci_walk_bus - device_lock(dev) <--- deadlock here If we do not do device_lock in pci_walk_bus, we can avoid deadlock. Device_lock in pci_walk_bus is introduced in commit: d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread is: https://lkml.org/lkml/2006/5/26/38. The patch author Zhang Yanmin said device_lock is added to pci_walk_bus because: Some error handling functions call pci_walk_bus. For example, PCIe aer. Here we lock the device, so the driver wouldn't detach from the device, as the cb might call driver's callback function. So I fixed the deadlock as follows: - remove device_lock from pci_walk_bus - add device_lock into callback if callback will call driver's callback I checked pci_walk_bus users one by one, and found only PCIe aer needs device lock. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+ CC: Zhang Yanmin <yanmin.zhang@intel.com>
2012-09-13Merge branch 'pci/trivial' into nextBjorn Helgaas
* pci/trivial: PCI: Drop duplicate const in DECLARE_PCI_FIXUP_SECTION PCI: Drop bogus default from ARCH_SUPPORTS_MSI PCI: cpqphp: Remove unreachable path PCI: Remove bus number resource debug messages PCI/AER: Print completion message at KERN_INFO to match starting message PCI: Fix drivers/pci/pci.c kernel-doc warnings
2012-09-12Merge branch 'pci/stephen-const' into nextBjorn Helgaas
* pci/stephen-const: make drivers with pci error handlers const scsi: make pci error handlers const netdev: make pci_error_handlers const PCI: Make pci_error_handlers const
2012-09-07PCI: Make pci_error_handlers constStephen Hemminger
Since pci_error_handlers is just a function table make it const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com>
2012-08-24PCI/AER: Print completion message at KERN_INFO to match starting messageLance Ortiz
The completion message in do_recovery() is currently KERN_DEBUG, while the starting message in aer_print_port_info() is KERN_INFO. This changes the completion message to KERN_INFO to match the starting message. [bhelgaas: changelog, use dev_info() instead of dev_printk(KERN_INFO)] Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23PCI/AER: Use PCI Express Capability accessorsJiang Liu
Use PCI Express Capability access functions to simplify PCIe AER. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_typeYijing Wang
Introduce an inline function pci_pcie_type(dev) to extract PCIe device type from pci_dev->pcie_flags_reg field, and prepare for removing pci_dev->pcie_type. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-11PCI/AER: use pci_is_pcie() instead of obsolete pci_dev.is_pcieBjorn Helgaas
Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. CC: Huang Ying <ying.huang@intel.com> CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22PCI: PCIe AER: add aer_recover_queueHuang Ying
In addition to native PCIe AER, now APEI (ACPI Platform Error Interface) GHES (Generic Hardware Error Source) can be used to report PCIe AER errors too. To add support to APEI GHES PCIe AER recovery, aer_recover_queue is added to export the recovery function in native PCIe AER driver. Recoverable PCIe AER errors are reported via NMI in APEI GHES. Then APEI GHES uses irq_work to delay the error processing into an IRQ handler. But PCIe AER recovery can be very time-consuming, so aer_recover_queue, which can be used in IRQ handler, delays the real recovery action into the process context, that is, work queue. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-21PCI: remove unused AER functionsChen Gong
In the commit 28eb5f2, aer_osc_setup is removed but corresponding definiton information in the aerdrv.h is missed. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-10PCI: Fix uninitialized variable bug in AER injection codeWanlong Gao
If it was preempted, and the variable aer_mask_override is changed after the spin_unlock_irqrestore it will write an uninitialized variable by the pci_write_config_dword() function. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-23Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/acpi/sleep.c Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21ACPI, APEI, Add PCIe AER error information printing supportHuang Ying
The AER error information printing support is implemented in drivers/pci/pcie/aer/aer_print.c. So some string constants, functions and macros definitions can be re-used without being exported. The original PCIe AER error information printing function is not re-used directly because the overall format is quite different. And changing the original printing format may make some original users' scripts broken. Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21PCIe, AER, use pre-generated prefix in error information printingHuang Ying
When printing PCIe AER error information, each line is prefixed with PCIe device and driver information. In original implementation, the prefix is generated when each line is printed. In fact, all lines share the same prefix. So this patch pre-generated the prefix, and use that one when each line is printed. In addition to common prefix can be pre-generated, the trailing white spaces in string constants and NULLs in char * array constants can be removed too. These can reduce the object file size further. The size of object file before and after changing is as follow: text data bss dec before: 3038 0 0 3038 after: 2118 0 0 2118 Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-04PCI: aer-inject: Override PCIe AER Mask RegistersPrarit Bhargava
I have several systems which have the same problem: The PCIe AER corrected and uncorrected masks have all the error bits set. This results in the inablility to test with the aer_inject module & utility on those systems. Add the 'aer_mask_override' module parameter which will override the corrected or uncorrected masks for a PCI device. The mask will have the bit corresponding to the status passed into the aer_inject() function. After this patch it is possible to successfully use the aer_inject utility on those PCI slots. Successfully tested by me on a Dell and Intel whitebox which exhibited the mask problem. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14PCI/ACPI: Request _OSC control once for each root bridge (v3)Rafael J. Wysocki
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 18:05:01 +0000