summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)Author
2010-07-16PCI: fall back to original BIOS BAR addressesBjorn Helgaas
If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew <nitr0@seti.kr.ua> Tested-by: Andrew <nitr0@seti.kr.ua> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-27Merge branch 'virtio' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6 * 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6: virtio-pci: disable msi at startup virtio: return ENOMEM on out of memory
2010-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Do not use native PCIe PME by default
2010-06-23virtio-pci: disable msi at startupMichael S. Tsirkin
virtio-pci resets the device at startup by writing to the status register, but this does not clear the pci config space, specifically msi enable status which affects register layout. This breaks things like kdump when they try to use e.g. virtio-blk. Fix by forcing msi off at startup. Since pci.c already has a routine to do this, we export and use it instead of duplicating code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: linux-pci@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2010-06-18PCI/PM: Do not use native PCIe PME by defaultRafael J. Wysocki
Commit c7f486567c1d0acd2e4166c47069835b9f75e77b (PCI PM: PCIe PME root port service driver) causes the native PCIe PME signaling to be used by default, if the BIOS allows the kernel to control the standard configuration registers of PCIe root ports. However, the native PCIe PME is coupled to the native PCIe hotplug and calling pcie_pme_acpi_setup() makes some BIOSes expect that the native PCIe hotplug will be used as well. That, in turn, causes problems to appear on systems where the PCIe hotplug driver is not loaded. The usual symptom, as reported by Jaroslav Kameník and others, is that the ACPI GPE associated with PCIe hotplug keeps firing continuously causing kacpid to take substantial percentage of CPU time. To work around this issue, change the default so that the native PCIe PME signaling is only used if directly requested with the help of the pcie_pme= command line switch. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is a listed regression from 2.6.33. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz> Tested-by: Antoni Grzymala <antekgrzymala@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-15intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga revisions.David Woodhouse
Certain revisions of this chipset appear to be broken. There is a shadow GTT which mirrors the real GTT but contains pre-translated physical addresses, for performance reasons. When a GTT update happens, the translations are done once and the resulting physical addresses written back to the shadow GTT. Except sometimes, the physical address is actually written back to the _real_ GTT, not the shadow GTT. Thus we start to see faults when that physical address is fed through translation again. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-15intel-iommu: Fix double lock in get_domain_for_dev()Jiri Slaby
stanse found the following double lock. In get_domain_for_dev: spin_lock_irqsave(&device_domain_lock, flags); domain_exit(domain); domain_remove_dev_info(domain); spin_lock_irqsave(&device_domain_lock, flags); spin_unlock_irqrestore(&device_domain_lock, flags); spin_unlock_irqrestore(&device_domain_lock, flags); This happens when the domain is created by another CPU at the same time as this function is creating one, and the other CPU wins the race to attach it to the device in question, so we have to destroy our own newly-created one. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-15intel-iommu: Fix reference by physical address in intel_iommu_attach_device()Sheng Yang
Commit a99c47a2 "intel-iommu: errors with smaller iommu widths" replace the dmar_domain->pgd with the first entry of page table when iommu's supported width is smaller than dmar_domain's. But it use physical address directly for new dmar_domain->pgd... This result in KVM oops with VT-d on some machines. Reported-by: Allen Kay <allen.m.kay@intel.com> Cc: Tom Lyon <pugs@cisco.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11PCI: hotplug/cpqphp, fix NULL dereferenceJiri Slaby
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"Jesse Barnes
This reverts commit 75568f8094eb0333e9c2109b23cbc8b82d318a3c. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11PCI: change resource collision messages from KERN_ERR to KERN_INFOBjorn Helgaas
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-07ahci: add pci quirk for JMB362Tejun Heo
JMB362 is a new variant of jmicron controller which is similar to JMB360 but has two SATA ports instead of one. As there is no PATA port, single function AHCI mode can be used as in JMB360. Add pci quirk for JMB362. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Aries Lee <arieslee@jmicron.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-21Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
2010-05-21Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables intel-iommu: Combine the BIOS DMAR table warning messages panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I') panic: Allow warnings to set different taint flags intel-iommu: intel_iommu_map_range failed at very end of address space intel-iommu: errors with smaller iommu widths intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled intel-iommu: use physfn to search drhd for VF intel-iommu: Print out iommu seq_id intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported intel-iommu: Avoid global flushes with caching mode. intel-iommu: Use correct domain ID when caching mode is enabled intel-iommu mistakenly uses offset_pfn when caching mode is enabled intel-iommu: use for_each_set_bit() intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
2010-05-21PCI: hotplug: pciehp: Removed check for hotplug of display devicesPraveen Kalamegham
Removed check to prevent hotplug of display devices within pciehp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-21PCI: Allow manual resource allocation for PCI hotplug bridgesFelix Radensky
At the moment only PCI-E briges can be flagged as hotplug, thus allowing manual resource preallocation via pci=hpmemsize=nnM and pci=hpiosize=nnM kernel parameters. Some PCI hotplug bridges, e.g. PLX 6254 can also benefit from this functionalily, as kernel fails to properly allocate their resources when hotplug device is added and PCI bus is rescanned. This patch adds header quirk for PLX 6254 that marks this bridge as hotplug. Other PCI bridges with similar problems can use it as well. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-21pci: check caps from sysfs file open to read device dependent config spaceChris Wright
The PCI config space bin_attr read handler has a hardcoded CAP_SYS_ADMIN check to verify privileges before allowing a user to read device dependent config space. This is meant to protect from an unprivileged user potentially locking up the box. When assigning a PCI device directly to a guest with libvirt and KVM, the sysfs config space file is chown'd to the unprivileged user that the KVM guest will run as. The guest needs to have full access to the device's config space since it's responsible for driving the device. However, despite being the owner of the sysfs file, the CAP_SYS_ADMIN check will not allow read access beyond the config header. With this patch we check privileges against the capabilities used when openining the sysfs file. The allows a privileged process to open the file and hand it to an unprivileged process, and the unprivileged process can still read all of the config space. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-19ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setupHuang Ying
Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tablesBen Hutchings
We now know how to deal with these tables so that they are harmless. Set TAINT_FIRMWARE_WORKAROUND instead of the default TAINT_WARN. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19intel-iommu: Combine the BIOS DMAR table warning messagesBen Hutchings
We have nearly the same code for warnings repeated four times. Move it into a separate function. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-18PCI hotplug: Use kmemdupJulia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18PCI: output FW warning in pci_read/write_vpdPrarit Bhargava
pci_read/write_vpd() can fail due to a timeout. Usually the command times out because of firmware issues (incorrect vpd length, etc.) on the PCI card. Currently, the timeout occurs silently. Output a message to the user indicating that they should check with their vendor for new firmware. Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in commentsRoman Fietze
This fixes all occurrences of pci_enable_device and pci_disable_device in all comments. There are no code changes involved. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18PCI quirks: disable msi on AMD rs4xx internal gfx bridgesAlex Deucher
Doesn't work reliably for internal gfx. Fixes kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=15626. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18PCI: Disable MSI for MCP55 on P5N32-E SLIBen Hutchings
As reported in <http://bugs.debian.org/552299>, MSI appears to be broken for this on-board device. We already have a quirk for the P5N32-SLI Premium; extend it to cover both variants of the board. Reported-by: Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Add amd_iommu=off command line option iommu-api: Remove iommu_{un}map_range functions x86/amd-iommu: Implement ->{un}map callbacks for iommu-api x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes kvm: Change kvm_iommu_map_pages to map large pages VT-d: Change {un}map_range functions to implement {un}map interface iommu-api: Add ->{un}map callbacks to iommu_ops iommu-api: Add iommu_map and iommu_unmap functions iommu-api: Rename ->{un}map function pointers to ->{un}map_range
2010-05-17intel-iommu: intel_iommu_map_range failed at very end of address spaceTom Lyon
intel_iommu_map_range() doesn't allow allocation at the very end of the address space; that code has been simplified and corrected. Signed-off-by: Tom Lyon <pugs@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-17intel-iommu: errors with smaller iommu widthsTom Lyon
When using iommu_domain_alloc with the Intel iommu, the domain address width is always initialized to 48 bits (agaw 2). This domain->agaw value is then used by pfn_to_dma_pte to (always) build a 4 level page table. However, not all systems support iommu width of 48 or 4 level page tables. In particular, the Core i5-660 and i5-670 support an address width of 36 bits (not 39!), an agaw of only 1, and only 3 level page tables. This version of the patch simply lops off extra levels of the page tables if the agaw value of the iommu is less than what is currently allocated for the domain (in intel_iommu_attach_device). If there were already allocated addresses above what the new iommu can handle, EFAULT is returned. Signed-off-by: Tom Lyon <pugs@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-12Revert "PCI: update bridge resources to get more big ranges in PCI assign ↵Linus Torvalds
unssigned" This reverts commit 977d17bb1749517b353874ccdc9b85abc7a58c2a, because it can cause problems with some devices not getting any resources at all when the resource tree is re-allocated. For an example of this, see https://bugzilla.kernel.org/show_bug.cgi?id=15960 (originally https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4982) (lkml thread: http://lkml.org/lkml/2010/4/19/20) where Peter Henriksson reported his Xonar DX sound card gone, because the IO port region was no longer allocated. Reported-bisected-and-tested-by: Peter Henriksson <peter.henriksson@gmail.com> Requested-by: Andrew Morton <akpm@linux-foundation.org> Requested-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11PCI: aerdrv: trivial cleanup for aerdrv_core.cHidetoshi Seto
Style cleanup for pci_{en,dis}able_pcie_error_reporting(). Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: trivial cleanup for aerdrv.cHidetoshi Seto
Skip zero-ing in aer_alloc_rpc() since it is allocated by kzalloc(). The closing comment marker "*/" is recommended for kernel-doc comments. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: introduce default_downstream_reset_linkHidetoshi Seto
I noticed that when I inject a fatal error to an endpoint via aer-inject, aer_root_reset() is called as reset_link for a downstream port at upstream of the endpoint: pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401 : pcieport 0000:52:02.0: Root Port link has been reset It externally appears to be working, but internally issues some accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for root port so not available on downstream port. This patch introduces default_downstream_reset_link that is a version of aer_root_reset() with no accesses to root port's register. It is used for downstream ports that has no reset_link function its specific. This patch also updates related description in pcieaer-howto.txt. Some minor fixes are included. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework find_aer_serviceHidetoshi Seto
The structure find_aer_service_data is no longer useful. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove is_downstreamHidetoshi Seto
The pcie->port of port service device points the port associated the service with. The find_aer_service iterates over children of given port udev. So it is clear that the pcie->port of port service of given port udev must always point the udev. Therefore we can know the type of udev without checking its children. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKSHidetoshi Seto
Make it clear that we only interest in 2 *_RCV bits. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRCHidetoshi Seto
The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework do_recoveryHidetoshi Seto
Move dev_printks for debug into do_recovery(). This allows do_recovery() to return void. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework get_e_source()Hidetoshi Seto
Current get_e_source() returns pointer to an element of array. However since it also progress consume counter, it is possible that the element is overwritten by newly produced data before the element is really consumed. This patch changes get_e_source() to copy contents of the element to address pointed by its caller. Once copied the element in array can be consumed. And relocate this function to more innocuous place. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework aer_isr_one_error()Hidetoshi Seto
Divide tricky for-loop into readable if-blocks. The logic to set multi_error_valid (to force walking pci bus hierarchy to find 2nd~ error devices) is changed too, to check MULTI_{,_UN}COR_RCV bit individually and to force walk only when it is required. And rework setting e_info->severity for uncorrectable, not to use magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework add_error_deviceHidetoshi Seto
Stop iteration if we cannot register any more. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove compare_device_idHidetoshi Seto
Inline too-simple subroutine only used here. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: introduce is_error_sourceHidetoshi Seto
Take core part of find_device_iter() to make a new function is_error_source() that checks given device has report an error or not. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework find_source_deviceHidetoshi Seto
Return bool to indicate that the source device is found or not. This allows us to skip calling aer_process_err_devices() if we can. And move dev_printk for debug into this function. v2: return bool instead of int Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: make aer_{en,dis}able_rootport staticHidetoshi Seto
These functions are only called from init/remove path of aerdrv, so move them from aerdrv_core.c to aerdrv.c, to make them static. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: cleanup inconsistent functionsHidetoshi Seto
This cleanup solves some minor naming issues by removing unuseful function aer_delete_rootport() and by renaming disable_root_aer() to aer_disable_rootport(). - Inconsistent location of alloc & free: The struct rpc is allocated in aer_alloc_rpc() at aerdrv.c while it is implicitly freed in aer_delete_rootport() at aerdrv_core.c. - Inconsistent function name: It makes a bit confusion that aer_delete_rootport() is seemed to be paired with aer_enable_rootport(), i.e. there is neither "add" against "delete" nor "disable" against "enable". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: RsvdP of PCI_ERR_ROOT_COMMANDHidetoshi Seto
Handle preserved bits properly. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>