summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)Author
2012-06-13USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2Alan Stern
This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-29Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
2012-05-24Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull main drm updates from Dave Airlie: "This is the main merge window request for the drm. It's big, but jam packed will lots of features and of course 0 regressions. (okay maybe there'll be one). Highlights: - new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus (qemu only). These drivers use the generic modesetting drivers. - initial prime/dma-buf support for i915, nouveau, radeon, udl and exynos - switcheroo audio support: so GPUs with HDMI can turn off the sound driver without crashing stuff. - There are some patches drifting outside drivers/gpu into x86 and EFI for better handling of multiple video adapters in Apple Macs, they've got correct acks except one trivial fixup. - Core: edid parser has better DMT and reduced blanking support, crtc properties, plane properties, - Drivers: exynos: add 2D core accel support, prime support, hdmi features intel: more Haswell support, initial Valleyview support, more hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of cleanups and fixes radeon: more HDMI audio support, improved GPU lockup recovery support, remove nested mutexes, less memory copying on PCIE, fix bus master enable race (kexec), improved fence handling gma500: cleanups, 1080p support, acpi fixes nouveau: better nva3 memory reclocking, kepler accel (needs external firmware rip), async buffer moves on nv84+ hw. I've some more dma-buf patches that rely on the dma-buf merge for vmap stuff, and I've a few fixes building up, but I'd decided I'd better get rid of the main pull sooner rather than later, so the audio guys are also unblocked." Fix up trivial conflict due to some duplicated changes in drivers/gpu/drm/i915/intel_ringbuffer.c * 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits) drm/nouveau/nvd9: Fix GPIO initialisation sequence. drm/nouveau: Unregister switcheroo client on exit drm/nouveau: Check dsm on switcheroo unregister drm/nouveau: fix a minor annoyance in an output string drm/nouveau: turn a BUG into a WARN drm/nv50: decode PGRAPH DATA_ERROR = 0x24 drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks drm/nvd9/copy: initialise copy engine, seems to work like nvc0 drm/nvc0/ttm: use copy engines for async buffer moves drm/nva3/ttm: use copy engine for async buffer moves drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method drm/nv84/ttm: use crypto engine for async buffer copies drm/nouveau/ttm: untangle code to support accelerated buffer moves drm/nouveau/fbcon: use fence for sync, rather than notifier drm/nv98/crypt: non-stub implementation of the engine hooks drm/nouveau/fifo: turn all fifo modules into engine modules drm/nv50/graph: remove ability to do interrupt-driven context switching drm/nv50: remove manual context unload on context destruction drm/nv50: remove execution engine context saves on suspend drm/nv50/fifo: use hardware channel kickoff functionality ...
2012-05-21Merge tag 'pci-for-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: - Host bridge cleanups from Yinghai - Disable Bus Master bit on PCI device shutdown (kexec-related) - Stratus ftServer fix - pci_dev_reset() locking fix - IvyBridge graphics erratum workaround * tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits) microblaze/PCI: fix "io_offset undeclared" error x86/PCI: only check for spinlock being held in SMP kernels resources: add resource_overlaps() PCI: fix uninitialized variable 'cap_mask' MAINTAINERS: update PCI git tree and patchwork PCI: disable Bus Master on PCI device shutdown PCI: work around IvyBridge internal graphics FLR erratum x86/PCI: fix unused variable warning in amd_bus.c PCI: move mutex locking out of pci_dev_reset function PCI: work around Stratus ftServer broken PCIe hierarchy x86/PCI: merge pcibios_scan_root() and pci_scan_bus_on_node() x86/PCI: dynamically allocate pci_root_info for native host bridge drivers x86/PCI: embed pci_sysdata into pci_root_info on ACPI path x86/PCI: embed name into pci_root_info struct x86/PCI: add host bridge resource release for _CRS path x86/PCI: refactor get_current_resources() PCI: add host bridge release support PCI: add generic device into pci_host_bridge struct PCI: rename pci_host_bridge() to find_pci_root_bridge() x86/PCI: fix memleak with get_current_resources() ...
2012-05-21OF: PCI: const usage needed by MIPSJohn Crispin
On MIPS we want to call of_irq_map_pci from inside arch/mips/include/asm/pci.h:extern int pcibios_map_irq( const struct pci_dev *dev, u8 slot, u8 pin); For this to work we need to change several functions to const usage. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-pci@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-mips@linux-mips.org Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3710/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-17ACPI / PCI / PM: Fix device PM regression related to D3hot/D3coldRafael J. Wysocki
Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228 Reported-by: rocko <rockorequin@hotmail.com> Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: Peter <lekensteyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07PCI: fix uninitialized variable 'cap_mask'Chunhe Lan
Get rid of these: drivers/pci/pcie/portdrv_core.c: In function 'pcie_port_device_register': drivers/pci/pcie/portdrv_core.c:275:16: warning: 'cap_mask' may be used uninitialized in this function [-Wuninitialized] drivers/pci/pcie/portdrv_core.c:240:6: note: 'cap_mask' was declared here In some cases, 'cap_mask' may be not set in pcie_port_platform_notify, holding a garbage value. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-07Merge branch 'topic/stratus' into nextBjorn Helgaas
2012-05-07Merge tag 'v3.4-rc6' into drm-intel-nextDaniel Vetter
Conflicts: drivers/gpu/drm/i915/intel_display.c Ok, this is a fun story of git totally messing things up. There /shouldn't/ be any conflict in here, because the fixes in -rc6 do only touch functions that have not been changed in -next. The offending commits in drm-next are 14415745b2..1fa611065 which simply move a few functions from intel_display.c to intel_pm.c. The problem seems to be that git diff gets completely confused: $ git diff 14415745b2..1fa611065 is a nice mess in intel_display.c, and the diff leaks into totally unrelated functions, whereas $git diff --minimal 14415745b2..1fa611065 is exactly what we want. Unfortunately there seems to be no way to teach similar smarts to the merge diff and conflict generation code, because with the minimal diff there really shouldn't be any conflicts. For added hilarity, every time something in that area changes the + and - lines in the diff move around like crazy, again resulting in new conflicts. So I fear this mess will stay with us for a little longer (and might result in another backmerge down the road). Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
2012-05-05ACPI: Fix D3hot v D3cold confusionLin Ming
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-04PCI: disable Bus Master on PCI device shutdownKhalid Aziz
Disable Bus Master bit on the device in pci_device_shutdown() to ensure PCI devices do not continue to DMA data after shutdown. This can cause memory corruption in case of a kexec where the current kernel shuts down and transfers control to a new kernel while a PCI device continues to DMA to memory that does not belong to it any more in the new kernel. I have tested this code on two laptops, two workstations and a 16-socket server. kexec worked correctly on all of them. Signed-off-by: Khalid Aziz <khalid.aziz@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-02PCI: work around IvyBridge internal graphics FLR erratumXudong Hao
For IvyBridge Mobile platform, a system hang may occur if a FLR (Function Level Reset) is asserted to internal graphics. This quirk is a workaround for the IVB FLR errata issue. We are disabling the FLR reset handshake between the PCH and CPU display, then manually powering down the panel power sequencing and resetting the PCH display. Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Kay, Allen M <allen.m.kay@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-02Merge tag 'drm-intel-next-2012-04-23' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-core-next Daniel Vetter writes: A new drm-intel-next pull. Highlights: - More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all known issues fixed. - Fencing cleanup and pipelined fencing removal from Chris. - rc6 residency interface from Ben, useful for powertop. - Cleanups and code reorg around the ringbuffer code (Ben&me). - Use hw semaphores in the pageflip code from Ben. - More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less merged than I've hoped for - we still have the unused function warning :( - More hsw patches from Eugeni, again, not yet enabled fully. - intel_pm.c refactoring from Eugeni. - Ironlake sprite support from Chris. - And various smaller improvements/fixes all over the place. Note that this pull request also contains a backmerge of -rc3 to sort out a few things in -next. I've also had to frob the shortlog a bit to exclude anything that -rc3 brings in with this pull. Regression wise we have a few strange bugs going on, but for all of them closer inspection revealed that they've been pre-existing, just now slightly more likely to be hit. And for most of them we have a patch already. Otherwise QA has not reported any regressions, and I'm also not aware of anything bad happening in 3.4. * tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits) drm/i915: rc6 residency (fix the fix) drm/i915/tv: fix open-coded ARRAY_SIZE. drm/i915: invalidate render cache on gen2 drm/i915: Silence the change of LVDS sync polarity drm/i915: add generic power management initialization drm/i915: move clock gating functionality into intel_pm module drm/i915: move emon functionality into intel_pm module drm/i915: move drps, rps and rc6-related functions to intel_pm drm/i915: fix line breaks in intel_pm drm/i915: move watermarks settings into intel_pm module drm/i915: move fbc-related functionality into intel_pm module drm/i915: Refactor get_fence() to use the common fence writing routine drm/i915: Refactor fence clearing to use the common fence writing routine drm/i915: Refactor put_fence() to use the common fence writing routine drm/i915: Prepare to consolidate fence writing drm/i915: Remove the unsightly "optimisation" from flush_fence() drm/i915: Simplify fence finding drm/i915: Discard the unused obj->last_fenced_ring drm/i915: Remove unused ring->setup_seqno drm/i915: Remove fence pipelining ...
2012-04-30atl1c: add workaround for issue of bit INTX-disable for MSI interruptHuang, Xiong
All supported devices have one issue that msi interrupt doesn't assert if pci command register bit (PCI_COMMAND_INTX_DISABLE) is set. Add workaround in drivers/pci/quirks.c Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30Merge branch 'topic/yinghai-hostbridge-cleanup' into nextBjorn Helgaas
2012-04-30PCI: move mutex locking out of pci_dev_reset functionKonrad Rzeszutek Wilk
The intent of git commit 6fbf9e7a90862988c278462d85ce9684605a52b2 "PCI: Introduce __pci_reset_function_locked to be used when holding device_lock." was to have a non-locking function that would call pci_dev_reset function. But it fell short of that by just probing and not actually reseting the device. To make that work we need a way to move the lock around device_lock to not be in pci_dev_reset (as the caller of __pci_reset_function_locked already holds said lock). We do this by renaming pci_dev_reset to __pci_dev_reset and bubbling said mutex out of __pci_dev_reset to pci_dev_reset (a wrapper around __pci_dev_reset). The __pci_reset_function_locked can now call __pci_dev_reset without having to worry about the dead-lock. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: work around Stratus ftServer broken PCIe hierarchyBjorn Helgaas
A PCIe downstream port is a P2P bridge. Its secondary interface is a link that should lead only to device 0 (unless ARI is enabled)[1], so we don't probe for non-zero device numbers. Some Stratus ftServer systems have a PCIe downstream port (02:00.0) that leads to both an upstream port (03:00.0) and a downstream port (03:01.0), and 03:01.0 has important devices below it: [0000:02]-+-00.0-[03-3c]--+-00.0-[04-09]--... \-01.0-[0a-0d]--+-[USB] +-[NIC] +-... Previously, we didn't enumerate device 03:01.0, so USB and the network didn't work. This patch adds a DMI quirk to scan all device numbers, not just 0, below a downstream port. Based on a patch by Prarit Bhargava. [1] PCIe spec r3.0, sec 7.3.1 CC: Myron Stowe <mstowe@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: James Paradis <james.paradis@stratus.com> CC: Matthew Wilcox <matthew.r.wilcox@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: add host bridge release supportYinghai Lu
We need a hook to release host bridge resources allocated when creating root bus. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: add generic device into pci_host_bridge structYinghai Lu
Use that device for pci_root_bus bridge pointer. Use pci_release_bus_bridge_dev() to release allocated pci_host_bridge in remove path. Use root bus bridge pointer to get host bridge pointer instead of searching host bridge list. That leaves the host bridge list unused, so remove it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: rename pci_host_bridge() to find_pci_root_bridge()Yinghai Lu
pci_host_bridge() looks like a C++ constructor. Also separate find_pci_root_bus() out. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: move host bridge-related code to host-bridge.cYinghai Lu
Move host bridge-related code from probe.c to a new host-bridge.c. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-27Merge branch 'for-v3.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull build fixes for less mainstream architectures from Paul Gortmaker: "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4). Fortunately the touches are nearly all specific to files just used by the arch in question. The two touches to shared/common files [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as no risk to anyone. Half of them relate to xtensa directly. It was only when I fixed the last xtensa issue that I realized that the arch has been broken for a significant time, and isn't a specific v3.4 regression. So if you wanted, we could leave xtensa lying bleeding in the street for a couple more weeks and queue those for 3.5. But given they are no risk to anyone outside of xtensa, I figured to just leave them in. If you are OK with taking the xtensa fixes, then please pull to get: - one last implicit include uncovered by system.h that is in a file specific to just one powerpc defconfig. (I'd sync'd with BenH). - fix an oversight in the PCI makefile where shared code wasn't being compiled for ARCH=frv - fix a missing include for GPIO in blackfin framebuffer. - audit and tag endif in blackfin ezkit board file, in order to find and fix the misplaced endif masking a block of code. - fix irq/debug.h choice of temporary macro names to be more internal so they don't conflict with names used by xtensa. - fix a reference to an undeclared local var in xtensa's signal.c - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my removing bug.h from kernel.h - fix xtensa to properly indicate it is using asm-generic/hardirq.h in order to resolve the link error - undefined ack_bad_irq The xtensa still fails final link as my latest binutils does something evil when ld forward-relocates unlikely() blocks, but in theory people who have older/valid toolchains could now use the thing." * 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: xtensa: fix build fail on undefined ack_bad_irq blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c blackfin: fix compile error in bfin-lq035q1-fb.c pci: frv architecture needs generic setup-bus infrastructure irq: hide debug macros so they don't collide with others. xtensa: fix build error in xtensa/include/asm/io.h xtensa: fix build failure in xtensa/kernel/signal.c powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]
2012-04-26pci: frv architecture needs generic setup-bus infrastructurePaul Gortmaker
Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells <dhowells@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-24vgaarb: Add support for setting the default video device (v2)Matthew Garrett
The default VGA device is a somewhat fluid concept on platforms with multiple GPUs. Add support for setting it so switching code can update things appropriately, and make sure that the sysfs code returns the right device if it's changed. v2: Updated to fix builds when __ARCH_HAS_VGA_DEFAULT_DEVICE is false. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: benh@kernel.crashing.org Cc: airlied@redhat.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-16PCI: Retry BARs restoration for Type 0 headers onlyRafael J. Wysocki
Some shortcomings introduced into pci_restore_state() by commit 26f41062f28d ("PCI: check for pci bar restore completion and retry") have been fixed by recent commit ebfc5b802fa76 ("PCI: Fix regression in pci_restore_state(), v3"), but that commit treats all PCI devices as those with Type 0 configuration headers. That is not entirely correct, because Type 1 and Type 2 headers have different layouts. In particular, the area occupied by BARs in Type 0 config headers contains the secondary status register in Type 1 ones and it doesn't make sense to retry the restoration of that register even if the value read back from it after a write is not the same as the written one (it very well may be different). For this reason, make pci_restore_state() only retry the restoration of BARs for Type 0 config headers. This effectively makes it behave as before commit 26f41062f28d for all header types except for Type 0. Tested-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-15PCI: Fix regression in pci_restore_state(), v3Rafael J. Wysocki
Commit 26f41062f28d ("PCI: check for pci bar restore completion and retry") attempted to address problems with PCI BAR restoration on systems where FLR had not been completed before pci_restore_state() was called, but it did that in an utterly wrong way. First off, instead of retrying the writes for the BAR registers only, it did that for all of the PCI config space of the device, including the status register (whose value after the write quite obviously need not be the same as the written one). Second, it added arbitrary delay to pci_restore_state() even for systems where the PCI config space restoration was successful at first attempt. Finally, the mdelay(10) it added to every iteration of the writing loop was way too much of a delay for any reasonable device. All of this actually caused resume failures for some devices on Mikko's system. To fix the regression, make pci_restore_state() only retry the writes for BAR registers and only wait if the first read from the register doesn't return the written value. Additionaly, make it wait for 1 ms, instead of 10 ms, after every failing attempt to write into config space. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-06Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-06xen/pcifront: avoid pci_frontend_enable_msix() falsely returning successJan Beulich
The original XenoLinux code has always had things this way, and for compatibility reasons (in particular with a subsequent pciback adjustment) upstream Linux should behave the same way (allowing for two distinct error indications to be returned by the backend). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-31ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett
Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ...
2012-03-30ACPI, PCI: Move acpi_dev_run_wake() to ACPI coreLin Ming
acpi_dev_run_wake() is a generic function which can be used by other subsystem too. Rename it to acpi_pm_device_run_wake, to be consistent with acpi_pm_device_sleep_wake. Then move it to ACPI core. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-22Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20Merge tag 'driver-core-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches for 3.4-rc1 from Greg KH: "Here's the big driver core merge for 3.4-rc1. Lots of various things here, sysfs fixes/tweaks (with the nlink breakage reverted), dynamic debugging updates, w1 drivers, hyperv driver updates, and a variety of other bits and pieces, full information in the shortlog." * tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits) Tools: hv: Support enumeration from all the pools Tools: hv: Fully support the new KVP verbs in the user level daemon Drivers: hv: Support the newly introduced KVP messages in the driver Drivers: hv: Add new message types to enhance KVP regulator: Support driver probe deferral Revert "sysfs: Kill nlink counting." uevent: send events in correct order according to seqnum (v3) driver core: minor comment formatting cleanups driver core: move the deferred probe pointer into the private area drivercore: Add driver probe deferral mechanism DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers w1_bq27000: Only one thread can access the bq27000 at a time. w1_bq27000 - remove w1_bq27000_write w1_bq27000: remove unnecessary NULL test. sysfs: Fix memory leak in sysfs_sd_setsecdata(). intel_idle: Revert change of auto_demotion_disable_flags for Nehalem w1: Fix w1_bq27000 driver-core: documentation: fix up Greg's email address powernow-k6: Really enable auto-loading powernow-k7: Fix CPU family number ...
2012-03-20PCI: fix bridge I/O window bus-to-resource conversionBjorn Helgaas
In 5bfa14ed9f3c, I forgot to initialize res2.flags before calling pcibios_bus_to_resource(), which depends on the resource type to locate the correct aperture. This bug won't hurt x86, which currently never has an offset between bus and CPU addresses, but will affect other architectures. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett
Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-04tg3: Recode PCI MRRS adjustment as a PCI quirkMatt Carlson
This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01PCI / PCIe: Introduce command line option to disable ARIRafael J. Wysocki
There are PCIe devices on the market that report ARI support but then fail to initialize correctly when ARI is actually used. This leads to situations in which kernels 2.6.34 and newer fail to handle systems where the previous kernels worked without any apparent problems. Unfortunately, it is currently unknown how many such devices are there. For this reason, introduce a new kernel command line option, pci=noari, allowing users to disable PCIe ARI altogether if they see problems with PCIe device initialization. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: make acpihp use __pci_remove_bus_device insteadYinghai Lu
pci_stop_bus_device gets called before in the same loop. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: export __pci_remove_bus_deviceYinghai Lu
Don't switch to pci_remove_bus_device yet, keep the __ prefix for now (the behavior is still the same: remove without stopping first). This allows other out of tree users or pending patches to get notified from compiler warning. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridgeYinghai Lu
The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu
The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: print out PCI device info along with durationYinghai Lu
Makes it a little easier to figure out which device may have caused a slow quirk. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>