summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2010-07-05pcmcia: do not initialize the present flag too late.Dominik Brodowski
The "present" flag was initialized too late -- possibly, a card was already registered at this time, so re-setting the flag to 0 caused pcmcia_dev_present() to fail. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07pcmcia: avoid validate_cis failure on CIS overrideDominik Brodowski
Commit a8408c17 introduced a new check to pccard_validate_cis(), which avoids any "late" calls to this function. This broke the insertion of cards which require a CIS override which changes the number of card functions. Fix this by asserting that this is _not_ a late call, but a proper call early during the card insertion process. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16138 Reported-by: Mikulas Patocka <mpatocka@redhat.com> CC: <stable@kernel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TIJustin P. Mattock
Seems pointless to have two #ifdef's with the same CONFIG_YENTA_TI. Remove the extra one and move CARDBUS_TYPE_ENE with the others. [linux@dominikbrodowski.net: spelling & whitespace fixes] Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-07pcmcia: only keep saved I365_CSCINT flag if there is no PCI irqDominik Brodowski
Keeping the saved I365_CSCINT flag around breaks PCMCIA on some system, and is only needed on a few systems to get PCMCIA to work. This patch allows PCMCIA to work on both types, and it fixes https://bugzilla.kernel.org/show_bug.cgi?id=16015 Reported-by: Justin P. Mattock <justinmattock@gmail.com> CC: <stable@kernel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-02of/pcmcia: m8xx_pcmcia.c: Fix build failuresAnatolij Gustschin
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - typo in match_table field in the struct device_driver (which shoud be of_match_table) Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-17pcmcia: disable PCMCIA ioctl also for ARMDominik Brodowski
As per a3f916f2c84f2b9e1d32cc0dbfe326a9e380dbfb, disable the long obsolete PCMCIA ioctl also for ARM. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-17drivers: Push down BKL into various driversArnd Bergmann
These are the last remaining device drivers using the ->ioctl file operation in the drivers directory (except from v4l drivers). [fweisbec: drop i8k pushdown as it has been done from procfs pushdown branch already] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-11[ARM] pxa: add support for Voipac PXA270 PCMCIAMarek Vasut
PCMCIA support for Voipac PXA270 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-10pcmcia: remove suspend-related comment from yenta_socket.cDominik Brodowski
While pci_set_power_state() is called by the PCI core unconditionally on all PCI devices, it is not called on _any_ PCI bridge device. Therefore, it is not surprising calling pci_set_power_state() on CardBus devices causes trouble. CC: dbrownell@users.sourceforge.net CC: gregkh@suse.de Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex heldDominik Brodowski
This avoids multiple lock takings in several codepaths. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: remove pcmcia_add_device_lockDominik Brodowski
As all cards to pcmcia_device_add() are already locked by skt_mutex, and the critical sections inside this function are further protected by ops_mutex, there's no need to keep a third lock around. Therfore, remove pcmcia_add_device_lock. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: do not autoadd root PCI bus resourcesDominik Brodowski
On the PCI root bus on the x86 architecture, the risk of hitting some strange system devices is too high: If a driver isn't loaded, the resources are not claimed; even if a driver is loaded, it may not request all resources or even the wrong one. We can neither trust the rest of the kernel nor ACPI/PNP and CRS parsing to get it right. Therefore, explicitly spell out what safeguards we provide, and add a safeguard to only use resources which are set up exclusively for the secondary PCI bus (non-subtractive mode): the risk of hitting system devices is quite low, as they usually aren't connected to the secondary PCI bus. CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: clarify alloc_io_space, move it to resource handlersDominik Brodowski
Clean up the alloc_io_space() function by moving most of it to the actual resource_ops. This allows for a bit less re-directions. Future cleanups will follow, and will make up for the code duplication currently present between rsrc_iodyn and rsrc_nonstatic (which are hardly ever built at the same time anyway, therefore no increase in built size). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: move all pcmcia_resource_ops providers into one moduleDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: move high level CIS access code to separate fileDominik Brodowski
No code changes. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: dev_node removal (core)Dominik Brodowski
Remove the dev_node declaration. We now only pass the device name to the deprecated userspace tools. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: pass FORCED_PULSE parameter in pcmcia_request_configuration()Dominik Brodowski
As it's only used there it makes no sense relying on pcmcia_request_irq(). CC: alsa-devel@alsa-project.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: replace struct irq with uint pcmcia_irq in struct pcmcia_socketDominik Brodowski
As we don't need the "Config" counter any more, we can simplify struct pcmcia_socket. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: setup IRQ to be used by PCMCIA drivers at card insertDominik Brodowski
Setup the IRQ to be used by PCMCIA drivers already during the device registration stage, making use of a new function pcmcia_setup_irq(). This will allow us to get rid of quite a lot of indirection in the future. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: remove unused IRQ modification featureDominik Brodowski
The IRQ modification feature was unused, and I see no reason to keep it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-07Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-04pcmcia: fix compilation after 16bit state locking changesMarc Zyngier
Commit 04de0816 (pcmcia: pcmcia_dev_present bugfix) broke the deprecated ioctl layer. Fix it by getting rid of references to unexisting fields. Signed-off-by: Marc Zyngier <maz@misterjones.org> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-04pcmcia: order userspace suspend and resume requestsDominik Brodowski
Assert that userspace suspend and resume requests appearing (almost) immediately are executed in the following order: suspend, resume. This should result in "pccardctl reset" behaving the same as before. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-03pcmcia: avoid pccard_validate_cis failure in resume callpathDominik Brodowski
If the PCMCIA CIS changed before a resume event (e.g. due to a card exchange while being suspended, possibly also during a call to "pccardctl reset"), also set the function count to zero so that the subsequent call to pccard_validate_cis() does not fail. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-30MIPS: DB1200: PCMCIA card detection must not be auto-enabled.Manuel Lauss
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-26pcmcia: fix matching rules for pseudo-multi-function cardsAlexander Kurz
Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards: I changed the code, so that the first matching struct pcmcia_device_id _PFC_ entry will mark the card has_pfc, preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match. [linux-pcmcia@lists.infradead.org: re-order commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-21pcmcia: pcmcia_dev_present bugfixDominik Brodowski
pcmcia_dev_present is in and by itself buggy. Add a note specifying why it is broken, and replace the broken locking -- taking a mutex is a bad idea in IRQ context, from which this function is rarely called -- by an atomic_t. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17drivers/pcmcia: Add missing local_irq_restoreJulia Lawall
Use local_irq_restore in this error-handling case just like in the one just below. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17pcmcia: avoid late calls to pccard_validate_cisDominik Brodowski
pccard_validate_cis() nowadays destroys the CIS cache. Therefore, calling it after card setup should be avoided. We can't control the deprecated PCMCIA ioctl (which is only used on ARM nowadays), but we can avoid -- and report -- any other calls. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-15pcmcia: fix ioport size calculation in rsrc_nonstaticDominik Brodowski
Size needs to be calculated after manipulating with the start value. Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: re-start on MFC overrideDominik Brodowski
If there are changes to the number of socket devices, we need to start over in all cases: else pcmcia_request_configuration() might get confused. Reported-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: fix io_probe due to parent (PCI) resourcesDominik Brodowski
Similar to commit 7a96e87d, we need to be aware of any parent PCI device when requesting IO regions, even only for testing ("probing"). Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: use previously assigned IRQ for all card functionsDominik Brodowski
Use a previously assigned IRQ for all card functions, not only if CONFIG_PCMCIA_PROBE is set. Reported-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-06Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix up alignf issues
2010-04-04pcmcia: fix up alignf issuesDominik Brodowski
- pcmcia_align() used a "start" variable twice. That's obviously a bad idea. - pcmcia_common_resource() needs the current "start" parameter being passed, instead of res->start. - pcmcia_common_resource() doesn't use the size and align parameters, so get rid of those. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 x86/PCI: for host bridge address space collisions, show conflicting resource frv/PCI: remove redundant warnings x86/PCI: remove redundant warnings PCI: don't say we claimed a resource if we failed PCI quirk: Disable MSI on VIA K8T890 systems PCI quirk: RS780/RS880: work around missing MSI initialization PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is present PCI: complain about devices that seem to be broken PCI: print resources consistently with %pR PCI: make disabled window printk style match the enabled ones PCI: break out primary/secondary/subordinate for readability PCI: for address space collisions, show conflicting resource resources: add interfaces that return conflict information PCI: cleanup error return for pcix get and set mmrbc functions PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions PCI: kill off pci_register_set_vga_state() symbol export. PCI: fix return value from pcix_get_max_mmrbc()
2010-03-24PCI: print resources consistently with %pRBjorn Helgaas
No functional change; just print resources in the conventional style. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24pcmcia: use dev_pm_ops for class pcmcia_socket_classDominik Brodowski
Instead of requiring PCMCIA socket drivers to call various functions during their (bus) resume and suspend functions, register an own dev_pm_ops for this class. This fixes several suspend/resume bugs seen on db1xxx-ss, and probably on some other socket drivers, too. With regard to the asymmetry with only _noirq suspend, but split up resume, please see bug 14334 and commit 9905d1b411946fb3 . Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-24pcmcia: allow for four multifunction subdevices (again)Dominik Brodowski
Commit aa584ca4 broke what 6cf5be51 had already fixed: there may be four multifunction devices, but just two pseudo-multifunction devices per PCMCIA card. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23pcmcia: do not use ioports < 0x100 on x86Dominik Brodowski
On x86 systems using ACPI _CRS information -- now the default for post-2008 systems -- the PCI root bus no longer pretends to be offering the root ioport_resource. To avoid accidentally hitting some platform / system device, use only I/O ports >= 0x100 for PCMCIA devices on x86. Reported-by: Komuro <komurojun-mbn@nifty.com> CC: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23pd6729: Coding Style fixesKomuro
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>