summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/Kconfig
AgeCommit message (Collapse)Author
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
2013-07-03Merge tag 'regmap-v3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A small but useful set of regmap updates this time around: - An abstraction for bitfields within a register map contributed by Srinivas Kandagatla, allowing drivers to cope more easily when hardware designers randomly move things about (mainly when talking to things like system controllers). - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used from hard IRQ context. - Small improvements to the cache infrastructure and performance, including a default cache sync operation so now all regmaps can sync easily. There's also a pinctrl driver making use of the new bitfield API, merged here for dependency reasons. There will be a simple add/add conflict with the pinctrl tree as a result." * tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: pinctrl: st: Remove unnecessary use of of_match_ptr macro pinctrl: st: fix return value check pinctrl: st: Add pinctrl and pinconf support. regmap: debugfs: Suppress cache for partial register files regmap: Add regmap_field APIs regmap: core: Cache all registers by default when cache is enabled regmap: Implemented default cache sync operation regmap: Make regmap-mmio usable from atomic contexts regmap: regcache: Fixup locking for custom lock callbacks regmap: debugfs: Fix return from regmap_debugfs_get_dump_start regmap: debugfs: Don't mark lockdep as broken due to debugfs write regmap: rbtree: Use range information to allocate nodes regmap: rbtree: Factor out node allocation regmap: Make regmap_check_range_table() a public API regmap: Add support for discarding parts of the register cache
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-06-25pinctrl: st: Add pinctrl and pinconf support.Srinivas KANDAGATLA
This patch add pinctrl support to ST SoCs. About hardware: ST Set-Top-Box parts have two blocks called PIO and PIO-mux which handle pin configurations. Each multi-function pin is controlled, driven and routed through the PIO multiplexing block. Each pin supports GPIO functionality (ALT0) and multiple alternate functions(ALT1 - ALTx) that directly connect the pin to different hardware blocks. When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and Pull Up (PU) are driven by the related PIO block. Otherwise the PIO multiplexing block configures these parameters and retiming the signal. About driver: This pinctrl driver manages both PIO and PIO-mux block using pinctrl, pinconf, pinmux, gpio subsystems. All the pinctrl related config information can only come from device trees. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driverJames Hogan
Add a pin control driver for the TZ1090's low power pins via the powerdown controller SOC_GPIO_CONTROL registers. These pins have individually controlled pull-up, and group controlled schmitt, slew-rate, drive-strength, and power-on-start (pos). The pdc_gpio0 and pdc_gpio1 pins can also be muxed onto the ir_mod_stable_out and ir_mod_power_out functions respectively. If no function is set they remain in GPIO mode. These muxes can be overridden by requesting them as GPIOs. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl-tz1090: add TZ1090 pinctrl driverJames Hogan
Add a pin control driver for the main pins on the TZ1090 SoC. This doesn't include the low-power pins as they're controlled separately via the Powerdown Controller (PDC) registers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-19ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip levelDoug Anderson
Previously if you had MACH_EXYNOS5_DT but not MACH_EXYNOS4_DT you'd be missing the pincontrol definitions. Move PINCTRL selects to the arch level since we should be enabling the code for all exynos variants. Update the PINCTRL descriptions to indicate that PINCTRL_EXYNOS is not for exynos5440. Also add basic dependencies for the PINCTRL_EXYNOS kernel config. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18pinctrl: add Intel BayTrail GPIO/pinctrl supportMathias Nyman
Add support for gpio on Intel BayTrail platforms. BayTrail supports 3 banks of gpios called SCORE, NCORE ans SUS with 102, 28 and 44 gpio pins. Supports gpio interrupts and ACPI gpio events Pins may be muxed to alternate function instead of gpio by firmware. This driver does not touch the pin muxing and expect firmare to set pin muxing and pullup/down properties properly. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: add pinctrl driver for Rockchip SoCsHeiko Stübner
This driver adds support the Cortex-A9 based SoCs from Rockchip, so at least the RK2928, RK3066 (a and b) and RK3188. Earlier Rockchip SoCs seem to use similar mechanics for gpio handling so should be supportable with relative small changes. Pull handling on the rk3188 is currently a stub, due to it being a bit different to the earlier SoCs. Pinmuxing as well as gpio (and interrupt-) handling tested on a rk3066a based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: add VF610 pinctrl driverJingchang Lu
Adds Freescale Vybrid VF610 pin controller driver to IMX common pinctrl driver framework. Signed-off-by: Jingchang Lu <b35083@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-21pinctrl: Add pinctrl-s3c24xx driverHeiko Stuebner
The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure. The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way. Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. This is solved by using different compatible properties for the wakeup eint node which set a property accordingly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-02Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
2013-04-09pinctrl: add pinctrl driver for imx6slShawn Guo
Add a pinctrl driver for i.MX6 SoloLite based on pinctrl-imx core driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: add pinctrl driver for imx6dlShawn Guo
The imx6dl is a derivative of imx6q with very limited difference. These two SoCs are so compatible that they can be handled as one platform in software. That said, we will not have target SOC_IMX6DL but just reusing SOC_IMX6Q. That's why the pinctrl-imx6dl driver is added here with symbol PINCTRL_IMX6Q controlling the build of it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: Add pinctrl-s3c64xx driverTomasz Figa
This patch adds pinctrl-s3c64xx driver which implements pin control interface for Samsung S3C64xx SoCs. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500Tony Prisk
This patch adds support for the GPIO/pinmux controller found on the VIA VT8500 and Wondermedia WM8xxx-series SoCs. Each pin within the controller is capable of operating as a GPIO or as an alternate function. The pins are numbered according to their control bank/bit so that if new pins are added, the existing numbering is maintained. All currently supported SoCs are included: VT8500, WM8505, WM8650, WM8750 and WM8850. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27pinctrl: remove pxa pinctrl driverHaojian Zhuang
pinctrl-pxa driver doesn't support well on DT mode. Now pinctrl-single could support DT mode & pin configuration. Use pinctrl-single driver to support MMP/PXA silicons instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07pinctrl: single: support generic pinconfHaojian Zhuang
Support the operation of generic pinconf. The supported config arguments are INPUT_SCHMITT, INPUT_SCHMITT_ENABLE, DRIVE_STRENGHT, BIAS_DISABLE, BIAS_PULLUP, BIAS_PULLDOWN, SLEW_RATE. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-21Merge tag 'sh-pinmux' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sh-mobile pinctrl conversion from Arnd Bergmann: "This is another cleanup series, containing the move of the Renesas SH-Mobile pin controller code from arch/arm/mach-shmobile over to the generic pinctrl subsystem, changing it over to the common interfaces in the process. Based on agreement between Olof, Paul Mundt, Linus Walleij and Simon, we're merging this large branch of pinctrl conversion through arm-soc, even though it contains the corresponding conversions for arch/sh. Main reason for this is tight dependencies (that will now mostly be broken) between the arch/sh and mach-shmobile implementations. There will be more of this in 3.10 to do device-tree bindings, but this is the initial conversion." * tag 'sh-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (81 commits) sh-pfc: sh_pfc_probe() sizeof() fix sh-pfc: Move sh_pfc.h from include/linux/ to driver directory sh-pfc: Remove pinmux_info definition sh: Remove unused sh_pfc_register_info() function sh: shx3: pinmux: Use driver-provided pinmux info sh: sh7786: pinmux: Use driver-provided pinmux info sh: sh7785: pinmux: Use driver-provided pinmux info sh: sh7757: pinmux: Use driver-provided pinmux info sh: sh7734: pinmux: Use driver-provided pinmux info sh: sh7724: pinmux: Use driver-provided pinmux info sh: sh7723: pinmux: Use driver-provided pinmux info sh: sh7722: pinmux: Use driver-provided pinmux info sh: sh7720: pinmux: Use driver-provided pinmux info sh: sh7269: pinmux: Use driver-provided pinmux info sh: sh7264: pinmux: Use driver-provided pinmux info sh: sh7203: pinmux: Use driver-provided pinmux info ARM: shmobile: sh73a0: Use driver-provided pinmux info ARM: shmobile: sh7372: Use driver-provided pinmux info ARM: shmobile: r8a7779: Use driver-provided pinmux info ARM: shmobile: r8a7740: Use driver-provided pinmux info ...
2013-02-20Merge tag 'pinctrl-for-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the main pinctrl changes for the v3.9 merge window. The most interesting change by far is how the device core grabs pinctrl default handles avoiding the need to stick boilerplate into driver consumers. - Grabbing of default pinctrl handles from the device core. These are the hunks hitting drivers/base. All is ACKed by Greg, after a long discussion about different alternatives. - Some stuff also touches the MFD and ARM SoC trees, this has been coordinated and ACKed. - New drivers for: - The Tegra 114 sub-SoC - Allwinner sunxi - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540 and AB8540. - Make it possible for hogged pins to enter a sleep mode, and make it possible for drivers to control that mode. - Various clean-up, extensions and device tree support to various pin controllers." * tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits) pinctrl: tegra: add clfvs function to Tegra114 support pinctrl: generic: rename input schmitt disable pinctrl/pinconfig: add debug interface pinctrl: samsung: remove duplicated line ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones ARM: ux500: remove irq_base property from platform_data pinctrl/abx500: use direct IRQ defines pinctrl/abx500: replace IRQ offsets with table read-in values pinctrl/abx500: move IRQ handling to ab8500-core pinctrl: exynos5440: remove erroneous __init pinctrl/abx500: adjust offset for get_mode() pinctrl/abx500: add Device Tree support pinctrl/abx500: align GPIO cluster boundaries pinctrl/abx500: prevent error path from corrupting returning error pinctrl: sunxi: add of_xlate function pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show pinctrl/lantiq: fix pinconfig parameters pinctrl/lantiq: one of the boot leds was defined incorrectly pinctrl/lantiq: only probe available pad controllers ...
2013-02-08Merge branch 'allwinner-sunxi' into develLinus Walleij
2013-02-05pinctrl: exynos: change PINCTRL_EXYNOS optionKukjin Kim
Since pinctrl-exynos can support exynos4 and exynos5 so changed the option name to PINCTRL_EXYNOS for more clarity. Cc: Thomas Abraham <Thomas.abraham@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05pinctrl/abx500: add AB8540 sub-driverPatrice Chotard
Add AB8540 sub driver to the ABx500 family, pins, pin groups and gpio range. As the pin controller (also the ABx500 controllers) is an inherent part of the SoC and will prevent boot if not available, select this from the Ux500 SoC Kconfig. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05pinctrl/abx500: add AB9540 sub-driverPatrice Chotard
Add AB9540 sub driver to the ABx500 family, pins, pin groups and gpio range. As the pin controller (also the ABx500 controllers) is an inherent part of the SoC and will prevent boot if not available, select this from the Ux500 SoC Kconfig. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05pinctrl/abx500: add AB8505 sub-driverPatrice Chotard
Add AB8505 sub driver to the ABx5x family. As the pin controller (also the ABx500 controllers) is an inherent part of the SoC and will prevent boot if not available, select this from the Ux500 SoC Kconfig. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30pinctrl/abx500: add AB8500 sub-driverPatrice Chotard
This adds a subdriver for the AB8500 pinctrl portions. As the pin controller (also the ABx500 controllers) is an inherent part of the SoC and will prevent boot if not available, select this from the Ux500 SoC Kconfig. Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30pinctrl: add abx500 pinctrl driver corePatrice Chotard
This adds the AB8500 core driver, which will be utilized by the follow-on drivers for different ABx500 variants. Sselect the driver from the DBX500_SOC, as this chip is powering and clocking that SoC. Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/Laurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-22ARM: sunxi: Add pinctrl driver for Allwinner SoCsMaxime Ripard
The Allwinner SoCs have an IP module that handle both the muxing and the GPIOs. This IP has 8 banks of 32 bits, with a number of pins actually useful for each of these banks varying from one to another, and depending on the SoC used on the board. This driver only implements the pinctrl part, the gpio part will come eventually. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-18pinctrl: exynos: change PINCTRL_EXYNOS optionKukjin Kim
Since pinctrl-exynos can support exynos4 and exynos5 so changed the option name to PINCTRL_EXYNOS for more clarity. Cc: Thomas Abraham <Thomas.abraham@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-18pinctrl: tegra114: add pinctrl driver for NVIDIA's Tegra114 SoCPritesh Raithatha
This adds a driver for the Tegra114 pinmux, and required parameterization data for Tegra114. The driver uses the common Tegra pincontrol driver utility functions to implement the majority of the driver. This driver is not compatible with the earlier NVIDIA's SoCs, hence add new compatibile as "nvidia,tegra114-pinmux". Originally written by Pritesh. ldewangan: - cleanup the patches, - remove non-require tables. - Use module_platform_driver() for driver registartion. Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-18pinctrl: samsung: removing duplicated condition for PINCTRL_SAMSUNGKukjin Kim
Now, PINCTRL_SAMSUNG should be enabled with PINCTRL_EXYNOS so we don't need to add 'depends on' condition already added in PINCTRL_EXYNOS. Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-11Merge tag 'pinctrl-for-v3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the first and major pinctrl changes for the v3.8 merge cycle. Some of this is used as merge base for other trees so I better be early on the trigger. As can be seen from the diffstat the major changes are: - A big conversion of the AT91 pinctrl driver and the associated ACKed platform changes under arch/arm/max-at91 and its device trees. This has been coordinated with the AT91 maintainers to go in through the pinctrl tree. - A larger chunk of changes to the SPEAr drivers and the addition of the "plgpio" driver for the SPEAr as well. - The removal of the remnants of the Nomadik driver from the arch/arm tree and fusion of that into the Nomadik driver and platform data header files. - Some local movement in the Marvell MVEBU drivers, these now have their own subdirectory. - The addition of a chunk of code to gpiolib under drivers/gpio to register gpio-to-pin range mappings from the GPIO side of things. This has been requested by Grant Likely and is now implemented, it is particularly useful for device tree work. Then we have incremental updates all over the place, many of these are cleanups and fixes from Axel Lin who has done a great job of removing minor mistakes and compilation annoyances." * tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits) ARM: mmp: select PINCTRL for ARCH_MMP pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910 pinctrl: pinctrl-single: Fix error check condition pinctrl: SPEAr: Update error check for unsigned variables gpiolib: Fix use after free in gpiochip_add_pin_range gpiolib: rename pin range arguments pinctrl: single: support gpio request and free pinctrl: generic: add input schmitt disable parameter pinctrl/u300/coh901: stop spawning pinctrl from GPIO pinctrl/u300/coh901: let the gpio_chip register the range pinctrl: add function to retrieve range from pin gpiolib: return any error code from range creation pinctrl: make range registration defer properly gpiolib: rename find_pinctrl_* gpiolib: let gpiochip_add_pin_range() specify offset ARM: at91: pm9g45: add mmc support ARM: at91: Animeo IP: add mmc support ARM: at91: dt: add mmc pinctrl for Atmel reference boards ARM: at91: dt: at91sam9: add mmc pinctrl support ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards ...
2012-12-02pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910Axel Lin
These drivers do not need to select PINCONF. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-22pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoCThomas Abraham
Add a new pinctrl driver for Samsung EXYNOS5440 SoC. The pin controller module in EXYNOS5440 is different from the pin controller found on other Samsung SoC. Hence, the pin controller driver for EXYNOS5440 SoC is independent of the Samsung pinctrl framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-15pinctrl/samsung: don't allow enabling pinctrl-samsung standaloneArnd Bergmann
The main samsung pinctrl module references the specific exynos4210 pinctrl driver, which selects the main driver in Kconfig. Making the main driver a silent "bool" option avoid this potential build error if CONFIG_PINCTRL_SAMSUNG=y && CONFIG_PINCTRL_EXYNOS4=n: drivers/built-in.o:(.rodata+0x4e4): undefined reference to `exynos4210_pin_ctrl' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: tegra: Make PINCTRL_TEGRA select PINMUX && PINCONFAxel Lin
Then we can remove "select PINMUX && PINCONF" from PINCTRL_TEGRA{20,30}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13pinctrl: mxs: Make PINCTRL_MXS select PINMUX && PINCONFAxel Lin
Then we can remove "select PINMUX && PINCONF" from PINCTRL_IMX{23,28}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11Merge branch 'at91' into develLinus Walleij
2012-11-11pinctrl: sirf: enable the driver support new SiRFmarco SoCBarry Song
The driver supports old up SiRFprimaII SoCs, this patch makes it support the new SiRFmarco as well. SiRFmarco, as a SMP SoC, adds new SIRFSOC_GPIO_PAD_EN_CLR registers, to disable GPIO pad, we should write 1 to the corresponding bit in the new CLEAR register instead of writing 0 to SIRFSOC_GPIO_PAD_EN. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: mvebu: move to its own directoryThomas Petazzoni
Like the spear platform, the mvebu platform has multiple files: one core file, and then one file per SoC family. More files will be added later, as support for mach-orion5x and mach-mv78xx0 SoCs is added to pinctrl-mvebu. For those reasons, having a separate subdirectory, drivers/pinctrl/mvebu/ makes sense, and it had already been suggested by Linus Wallej when the driver was originally submitted. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: mvebu: allow plat-orion architectures to use pinctrl-mvebuThomas Petazzoni
The mach-kirkwood and mach-dove architectures have not yet been integrated into the mach-mvebu directory, which should ultimately contain the support for all Marvell SoCs from the Engineering Business Unit. However, before this can happen, we need to let mach-kirkwood and mach-dove use the pinctrl-mvebu driver, which supports the kirkwood and dove SoC families. In order to do that, we make this driver available as soon as PLAT_ORION is selected, instead of using ARCH_MVEBU as a condition. In the long term, PLAT_ORION should disappear and be fully replaced by ARCH_MVEBU, but the plan is to make the migration step by step, by first having the existing mach-* directories for Marvell SoCs converge on several infrastructures, including the pinctrl one. Also, like the spear pinctrl driver, we put all pinctrl-mvebu Kconfig options under a if, in order to avoid having certain options (PINCTRL_DOVE, PINCTRL_KIRKWOOD, etc.) selecting an option (PINCTLR_MVEBU) which itself has a dependency (on ARCH_MVEBU). In this a construct, the dependency is in fact ignored due to the selects. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-06pinctrl: samsung and exynos need to depend on OF && GPIOLIBAxel Lin
This patch fixes below build error when !CONFIG_OF_GPIO. CC drivers/pinctrl/pinctrl-samsung.o drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_pinctrl_parse_dt_pins': drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable 'prop' [-Wunused-variable] drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/pinctrl-samsung.c:797:5: error: 'struct gpio_chip' has no member named 'of_node' make[2]: *** [drivers/pinctrl/pinctrl-samsung.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 The samsung pinctrl driver supports only device tree enabled platforms. Thus make PINCTRL_SAMSUNG depend on OF && GPIOLIB. The reason to depend on GPIOLIB is CONFIG_OF_GPIO only available when GPIOLIB is selected. Since PINCTRL_EXYNOS4 select PINCTRL_SAMSUNG, thus also make PINCTRL_EXYNOS4 depend on OF && GPIOLIB. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-13ARM: at91: add pinctrl supportJean-Christophe PLAGNIOL-VILLARD
This is also include the gpio controller as the IP share both. Each soc will have to describe the SoC limitation and pin configuration via DT. This will allow to do not need to touch the C code when adding new SoC if the IP version is supported. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
2012-10-07Merge tag 'soc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
2012-10-02Merge tag 'pinctrl-for-v3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "Some of this stuff is hitting arch/arm/* and have been ACKed by the ARM SoC folks, or it's device tree bindings pertaining to the specific driver. These are the bulk pinctrl changes for kernel v3.7: - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs, provide platform config for the Nomadik. - Add a driver for the i.MX35. - Add a driver for the BCM2835, an advanced GPIO expander. - Various fixes and clean-ups and minor improvements for the core, Nomadik, pinctr-single, sirf drivers. - Some platform config for the ux500." * tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits) pinctrl: add bcm2835 driver pinctrl: clarify idle vs sleep states pinctrl/nomadik: use irq_find_mapping() pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input pinctrl: sirf: add missing pins to pinctrl list pinctrl: sirf: fix a typo in sirfsoc_gpio_probe pinctrl: pinctrl-single: add debugfs pin h/w state info ARM: ux500: 8500: update I2C sleep states pinctrl pinctrl: Fix potential memory leak in pinctrl_register_one_pin() ARM: ux500: tidy up pin sleep modes ARM: ux500: fix spi2 pin group pinctrl: imx: remove duplicated const pinctrl: document semantics vs GPIO ARM: ux500: 8500: use hsit_a_2 group for HSI pinctrl: use kasprintf() in pinmux_request_gpio() pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux pinctrl/nomadik : add MC1_a_2 pin MC1 function group list pinctrl: pinctrl-single: Make sure we do not change bits outside of mask ...
2012-10-01pinctrl: add bcm2835 driverSimon Arlott
The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt controller, and pinmux/control device. Original driver by Simon Arlott. Rewrite including GPIO chip device by Chris Boot. Upstreaming changes by Stephen Warren: * Wrote DT binding documentation. * Changed brcm,function to an integer to more directly match the datasheet, and to match brcm,pins being an integer. * Implemented pull-up/down pin config. * Removed read-only DT property and related code. The restriction this implemented are driven by the board, not the GPIO HW block, so don't really make sense of a HW block binding, were in general incomplete (since they could only know about the few pins hard-coded into the Raspberry Pi B board design and not the uncommitted GPIOS), and are better represented simply by not writing incorrect data into pin configuration nodes. * Don't set GPIO_IN function select in gpio_request_enable() to avoid glitches; defer this to gpio_set_direction(). Consequently, removed empty bcm2835_pmx_gpio_request_enable(). * Simplified enabled_irq_map[]; make it explicitly 1 entry per bank. * Lifted use of enabled_irq_map[] outside the per-interrupt loop in IRQ handler, thus fixing an issue where the code was indexing into enabled_irq_map[] by intra-bank GPIO ID, not global GPIO ID. * Removed locking in IRQ handler, since all other code uses spin_lock_irqsave() and so guarantees it doesn't run concurrently with the handler. * Moved duplicated BUILD_BUG_ON()s into probe(). Also check size of bcm2835_gpio_pins[]. * Remove range-checking from bcm2835_pctl_get_groups_count() since we've decided to trust the pinctrl core. * Made bcm2835_pmx_gpio_disable_free() call bcm2835_pinctrl_fsel_set() directly for simplicity. * Fixed body of dt_free_map() to match latest dt_node_to_map(). * Removed GPIO ownership check from bcm2835_pmx_enable() since the pinctrl core owns doing this. * Made irq_chip and pinctrl_gpio_range .name == MODULE_NAME so it's more descriptive. * Simplified remove(); removed call to non-existent pinctrl_remove_gpio_range(), remove early return on error. * Don't force gpiochip's base to 0. Set gpio_range.base to gpiochip's base GPIO number. * Error-handling cleanups in probe(). * Switched to module_platform_driver() rather than open-coding. * Made pin, group, and function names lower-case. * s/broadcom/brcm/ in DT property names. * s/2708/2835/. * Fixed a couple minor checkpatch warnings, and other minor cleanup. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>