summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2013-09-27pinctrl: Correct number of pins for s5pv210Mateusz Krawczuk
Values of pins in table s5pv210 bank are incorrect. This patch correct values. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27pinctrl: adi2: Fix dead lock in adi_gpio_direction_outputAxel Lin
Current code hold port->lock spinlock and then try to grab the lock again in adi_gpio_set_value(). Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27pinctrl: adi2: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27pinctrl: at91: fix sam9x5 debounce/deglitch functionsBoris BREZILLON
Replace at91_mux_get_deglitch with at91_mux_pio3_get_deglitch when using sam9x5 (pio3) IP. at91_mux_get_deglitch only test the activation of the "Input Filter" which may be overloaded by the activation of the "Input Filter Slow Clock" to use the input filter as a debounce filter instead of a deglitch filter. Fix at91_mux_pio3_get_debounce to test the activation of the Input Filter before testing the activation of the debounce filter (Input Filter Slow Clock depends on Input Filter). Fix at91_mux_pio3_set_debounce function to avoid disabling the deglitch filter ("Input Filter") when debounce filter is disabled. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27pinctrl: at91: fix typosBoris BREZILLON
Fix AT91_PINCTRL_DEBOUNCE_VAL dt macro typo. Fix at91_pinctrl_mux_ops callback typos. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27sh-pfc: r8a7790: add pin definitions for the I2C3 interfaceGuennadi Liakhovetski
There are four I2C interfaces on r8a7790, each of them can be connected to one of the two respective I2C controllers, e.g. interface #0 can be configured to work with I2C0 or with IIC0. Additionally some of those interfaces can also use one of several pin sets. Interface #3 is special, because it can be used in automatic mode for DVFS. It only has one set of pins available and those pins cannot be used for anything else, they also lack the GPIO function. This patch uses the sh-pfc ability to configure pins, not associated with GPIOs and adds support for I2C3 to the r8a7790 PFC set up. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-24sh-pfc: r8a7790: Add I2C pin groups and functionsUlrich Hecht
Adds pinmux for i2c bus 1 and 2. (Pins for 0 and 3 are not multiplexed.) Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-24sh-pfc: r8a7778: Add SRU/SSI pin supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-23Merge branch 'devel' into for-nextLinus Walleij
2013-09-23pinctrl: remove an unnecessary castDan Carpenter
sizeof() is already size_t so there is no need to cast here. Generally, casting inside the min() macro instead of using min_t() is considered bad style. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23pinctrl: fix pinconf_dbg_config_write return typeVincent Stehlé
Have pinconf_dbg_config_write() return a ssize_t. This fixes the following compilation warning: drivers/pinctrl/pinconf.c:617:2: warning: initialization from incompatible pointer type [enabled by default] drivers/pinctrl/pinconf.c:617:2: warning: (near initialization for ‘pinconf_dbg_pinconfig_fops.write’) [enabled by default] Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23pinctrl: pinctrl-adi2-bf60x: remove useless and duplicated GPIO definition ↵Sonic Zhang
for PPI2. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23pinctrl: pinctrl-adi2: Add dependency to arch BLACKFIN in Kconfig.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-19pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.Sonic Zhang
The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-19pinctrl: tegra114: Remove MODULE_ALIASThierry Reding
The driver cannot be built as a module, so having a MODULE_ALIAS() isn't useful. While at it, fix a small typo in the file header comment and make the module description string consistent with those for earlier Tegra SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-08-30pinctrl: sunxi: Fix off-by-one for valid offset range checkingAxel Lin
The valid offset range should be 0 ... chip->ngpio - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-30pinctrl: sunxi: drop lock on error pathLinus Walleij
I forgot to drop the lock for the return inside the loop protected by the spinlock in the pin config routine when merging in -rc7 in commit 6ad30ce046aefbdc3848232c665a728860d7bb68 Reported-by: Sherman Yin <syin@broadcom.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-29pinctrl: pinconf-generic: Remove ti prefix in dev_err messagesAxel Lin
It does not make sense to show ti prefix in pinconf_generic_dt_subnode_to_map() dev_err messages. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-29Merge tag 'v3.11-rc7' into develLinus Walleij
Merged in this to avoid conflicts with the big locking fixes from upstream. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/pinctrl/pinctrl-sunxi.c
2013-08-29pinctrl: rockchip: Implement .request() and .free() callbacksAxel Lin
Implement .request() and .free() callbacks on the GPIO chips to inform pinctrl when a GPIO is requested or freed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: at91: fix get_pullup/down function returnBoris BREZILLON
In PIO_PUSR and PIO_PPDSR register if a given bit is set 1 this means the pullup/down for this pin (pin is represented as a bit position) is disabled. Cc: stable <stable@vger.kernel.org> # 3.8+ Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: sh-pfc: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: Add s5pv210 support to pinctrl-exynosMateusz Krawczuk
This patch implements pinctrl support and adds device tree bindings for s5pv210. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: utils: include export.h to avoid warningsLaxman Dewangan
Include "linux/export.h" to avoid following warnings during compilation: /*** pinctrl/pinctrl-utils.c:53:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:53:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:53:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:70:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:70:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:70:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:98:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:98:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:98:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:122:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:122:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:122:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:135:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:135:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:135:1: warning: parameter names (without types) in function declaration [enabled by default] **/ Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: s3c24xx: off by one in s3c24xx_eint_init()Dan Carpenter
If "irq == NUM_EINT" then it writes one space beyond the end of the eint_data->domains[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: mvebu: testing the wrong variableDan Carpenter
We wanted to test "*map" here instead of "map". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: abx500: fix bitwise AND testDan Carpenter
The intent here was to test if the bit was set or not but there is a logical vs bitwise AND typo so it is true if any bits are set. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: mvebu: Convert to use devm_ioremap_resourceJisheng Zhang
The resource mapped by of_iomap() isn't unmapped in error path. This patch fix the resource leakage by using devm_ioremap_resource() instead of of_iomap(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: Pass all configs to driver on pin_config_set()Sherman Yin
When setting pin configuration in the pinctrl framework, pin_config_set() or pin_config_group_set() is called in a loop to set one configuration at a time for the specified pin or group. This patch 1) removes the loop and 2) changes the API to pass the whole pin config array to the driver. It is now up to the driver to loop through the configs. This allows the driver to potentially combine configs and reduce the number of writes to pin config registers. All c files changed have been build-tested to verify the change compiles and that the corresponding .o is successfully generated. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Matt Porter <matt.porter@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tz1090-pdc: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tz1090: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tegra: Convert to devm_ioremap_resourceAxel Lin
Using the new devm_ioremap_resource() we can greatly simplify resource handling. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: rockchip: Simplify pin_to_bank equationAxel Lin
If (b->pin_base + b->nr_pins - 1) < pin is true, pin >= b->pin_base is always true because b->nr_pins is never less than 0. Thus this patch simplify the equation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: spear: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: rockchip: Remove of_match_ptr macro for DT only driverAxel Lin
This is a DT only driver and rockchip_pinctrl_dt_match is always compiled in. Thus remove of_match_ptr macro. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: palmas: PINCTRL_PALMAS needs to select PINMUXAxel Lin
Fix below build error if !PINMUX. CC drivers/pinctrl/pinctrl-palmas.o drivers/pinctrl/pinctrl-palmas.c:741:21: error: variable 'palmas_pinmux_ops' has initializer but incomplete type drivers/pinctrl/pinctrl-palmas.c:742:2: error: unknown field 'get_functions_count' specified in initializer drivers/pinctrl/pinctrl-palmas.c:742:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:742:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:743:2: error: unknown field 'get_function_name' specified in initializer drivers/pinctrl/pinctrl-palmas.c:743:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:743:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:744:2: error: unknown field 'get_function_groups' specified in initializer drivers/pinctrl/pinctrl-palmas.c:744:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:744:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:745:2: error: unknown field 'enable' specified in initializer drivers/pinctrl/pinctrl-palmas.c:745:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:745:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] make[2]: *** [drivers/pinctrl/pinctrl-palmas.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: core: Add proper mutex lock in pinctrl_request_gpioAxel Lin
This one is missed in commit 42fed7ba "pinctrl: move subsystem mutex to pinctrl_dev struct". I think this fixes the race between pin_free() and pin_request() calls. It protects accessing the members of pctldev->desc. (e.g. update desc->mux_usecount, desc->gpio_owner, desc->mux_owner, etc) Current code grabs pctldev->mutex before calling pinmux_free_gpio(), but did not grab the mutex while calling pinmux_request_gpio(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: imx: Fix compilation with DEBUG enabledSascha Hauer
This became broken with converting the pinmux arrays into struct types. While at it replace the preprocessor magic with a simple dev_dbg. Reported-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: rockchip: Simplify for loop iterationAxel Lin
Just return once a match found makes the code simpler and shorter. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: tegra: use pinctrl-utils APIs for mappingLaxman Dewangan
Pin control utility functions provides the function for creating map lists. In place of implementing APIs locally in Tegra pin control driver for creating map lists, use the utility functions. This reduces the code size and avoid duplication. Changes from V1: - Rebased change on top of V1. - Use pinctrl_utils_dt_free_map Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: utils : add support to pass config type in generic util APIsLaxman Dewangan
Add support to pass the config type like GROUP or PIN when using the utils or generic pin configuration APIs. This will make the APIs more generic. Added additional inline APIs such that it can be use directly as callback for the pinctrl_ops. Changes from V1: - Remove separate implementation for pins and group for pinctrl_utils_dt_free_map and improve this function to support both i.e. PINS and GROUPs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: samsung: Parse pin groups before calling pinctrl_register()Tomasz Figa
Calling pinctrl_register() means that the driver is fully initialized and might accept pinmux/pinconf requests, so pin groups must be parsed before. This patch fixes this problem by moving device tree parsing before call to pinctrl_register(). In addition, this fixes support for hogs on pin controllers handled by pinctrl-samsung driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: palmas: Fix device name in Kconfig textMark Brown
The device family is called Palmas so there should be a 's' on the end of the name. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: SPEAr310: Pass correct of_device_id table name to MODULE_DEVICE_TABLEAxel Lin
The symbol SPEAr310_pinctrl_of_match does not exist at all. Fix it. We didn't hit the compile error because this driver can only be built-in now. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: sunxi: Add Allwinner A20 pins setMaxime Ripard
The Allwinner A20 is pin-compatible with the older A10, so the two pin set are quite similar. However, since the A20 has new features, we can't just use the A10 pin set as is, and we need to define our own for the A20. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: sunxi: Add Allwinner A31 pins setMaxime Ripard
The Allwinner A31 SoC uses the same IP than the one found in the A10/A13, with only different pins. Add the pins and the associated functions found in the A31. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: sunxi: Fix inconsistent indentationMaxime Ripard
Some pin functions in the array were not indented like the other functions in this array. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: core: Remove unnecessary test for desc->nameAxel Lin
The implementation in pinctrl_register_one_pin() ensures pindesc->name is always not NULL before insert the pindesc to radix tree. If the desc return from pin_desc_get is not NULL, desc->name is always not NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: core: Hold pctldev->mutex mutex lock while traversing gpio_ranges listAxel Lin
Hold pctldev->mutex mutex_lock when traverse the list. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 03:53:24 +0000