summaryrefslogtreecommitdiffstats
path: root/drivers/power/olpc_battery.c
AgeCommit message (Collapse)Author
2011-01-13olpc_battery: Fix up XO-1.5 properties listSascha Silbe
The patches adding support for CURRENT_NOW, VOLTAGE_NOW, CHARGE_NOW and CHARGE_FULL_DESIGN were based on a tree not including c566d299 ("olpc_battery: Ambient temperature is not available on XO-1.5") and therefore only modified the then-common, now-XO-1 properties list. This patch adds the new properties to XO-1.5 as well. Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-12olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOWSascha Silbe
{CURRENT,VOLTAGE}_AVG are actually {CURRENT,VOLTAGE}_NOW (the EC code directly passes through the value from the gas gauge instead of the internally used average). We retain {CURRENT,VOLTAGE}_AVG as an alias for compatibility reasons, it will be removed later. Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> [ pgf@laptop.org: added VOLTAGE_NOW, aliased to VOLTAGE_AVG ] Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-12olpc_battery: Add support for CHARGE_NOWSascha Silbe
CHARGE_NOW is needed by some user space software (read: UPower) for internal calculations. This patch violates the power supply class definition (as we already do for CAPACITY though it isn't as obvious there), but this is the best we can do without adding rather sophisticated algorithms to either the EC or UPower. Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-12olpc_battery: Add support for CHARGE_FULL_DESIGNSascha Silbe
Some user space software (read: UPower) uses CHARGE_FULL_DESIGN for internal calculations. The design capacity of the OLPC batteries is effectively fixed and only needs to be exported. Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-12olpc_battery: Ambient temperature is not available on XO-1.5Daniel Drake
The XO-1.5 does not support the ambient temperature property. Create a separate list of properties for that configuration where ambient temperature is not included, and apply the correct property list at runtime. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28olpc_battery: Fix endian neutral breakage for s16 valuesRichard A. Smith
When the driver was updated to be endian neutral (8e9c7716c) the signed part of the s16 values was lost. This is because be16_to_cpu() returns an unsigned value. This patch casts the values back to a s16 number prior to the the implicit cast up to an int. Signed-off-by: Richard A. Smith <richard@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: <stable@kernel.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-09olpc_battery: Fix build failure caused by sysfs changesDavid Woodhouse
drivers/power/olpc_battery.c:387: error: unknown field 'owner' specified in initializer drivers/power/olpc_battery.c:387: warning: excess elements in struct initializer drivers/power/olpc_battery.c:387: warning: (near initialization for 'olpc_bat_eeprom.attr') The .owner field has been dropped from the attr struct. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02power_supply: Add a charge_type property, and use it for olpc driverAndres Salomon
This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Add an 'error' sysfs device that displays raw errorsAndres Salomon
Grab the error code from EC_BAT_ERRCODE and let the user see it (rather than attempting to decode it as we do with PROP_HEALTH) with a separate error sysfs file. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"Andres Salomon
This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Ensure that the TRICKLE bit is checkedAndres Salomon
There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit. So we must check for the bit when we're checking the charging/present status. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Fix up eeprom read functionAndres Salomon
The eeprom read function was placing values into the wrong place in 'buf'; we were starting from buf[off], rather than buf[0]. Also, the for loop that we were using was much uglier than it needed to be. This cleans it up a bit. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-10-16olpc: olpc_battery.c sparse endian annotationsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-19power_supply: fix up CHARGE_COUNTER output to be more preciseAndres Salomon
As Richard Smith pointed out, ACR * 6250 / 15 provides for less precision loss than ACR * 4167 / 10, _and_ it doesn't overflow. Switch to using that equation for CHARGE_COUNTER. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Richard A. Smith" <richard@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-13power_supply: add CHARGE_COUNTER property and olpc_battery support for itAndres Salomon
This adds PROP_CHARGE_COUNTER to the power supply class (documenting it as well). The OLPC battery driver uses this for spitting out its ACR values (in uAh). We have some rounding errors (the data sheet claims 416.7, the math actually works out to 416.666667, so we're forced to choose between overflows or precision loss. I chose precision loss, and stuck w/ data sheet values), but I don't think anyone will care that much. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: bump EC version check that we refuse to run with in olpc_batteryAndres Salomon
Refuse to run with an EC < 0x44. We're playing it safe, and this is a pretty old EC version. Also, add a comment about why we're checking the EC version. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: cleanup of the OLPC battery driverAndres Salomon
Move portions of the massive switch statement into functions. The layout of this thing has already caused one bug (a break in the wrong place), it needed to shrink. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: add eeprom dump file to olpc_battery's sysfsAndres Salomon
This allows you to dump 0x60 bytes from the battery's EEPROM (starting at address 0x20). Note that it does an EC command for each byte, so it's pretty slow. OTOH, if you want to grab just a single byte from somewhere in the EEPROM, you can do something like: dd bs=1 count=1 skip=16 if=/sys/class/power_supply/olpc-battery/eeprom | od -x Userspace battery collection/logging information needs this. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: Support serial number in olpc_batteryDavid Woodhouse
This adds serial number support to the OLPC battery driver. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-04-29x86: olpc: add One Laptop Per Child architecture supportAndres Salomon
This adds support for OLPC XO hardware. Open Firmware on XOs don't contain the VSA, so it is necessary to emulate the PCI BARs in the kernel. This also adds functionality for running EC commands, and a CONFIG_OLPC. A number of OLPC drivers depend upon CONFIG_OLPC. olpc_ec_timeout is a hack to work around Embedded Controller bugs. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: geode_has_vsa build fix] [akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist] Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02power: remove POWER_SUPPLY_PROP_CAPACITY_LEVELAndres Salomon
The CAPACITY_LEVEL stuff defines various levels of charge; however, what is the difference between them? What differentiates between HIGH and NORMAL, LOW and CRITICAL, etc? As it appears that these are fairly arbitrary, we end up making such policy decisions in the kernel (or in hardware). This is the sort of decision that should be made in userspace, not in the kernel. If the hardware does not support _CAPACITY and it cannot be easily calculated, then perhaps the driver should register a custom CAPACITY_LEVEL attribute; however, userspace should not become accustomed to looking for such a thing, and we should certainly not encourage drivers to provide CAPACITY_LEVEL stubs. The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The OLPC battery driver is the only driver making use of this, so it's removed from there as well. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-15Power supply class and drivers: remove non obligatory return statementsAnton Vorontsov
Per Jeff Garzik request. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10[BATTERY] One Laptop Per Child power/battery driverDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>