summaryrefslogtreecommitdiffstats
path: root/drivers/power
AgeCommit message (Collapse)Author
2010-01-29wm97xx_battery: Handle missing platform data gracefullyMark Brown
Don't unconditionally dereference the WM97xx core platform data since it may not be present, causing an oops. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-12-18pmu_battery: Fix battery full reportingThomas Champagne
Prior to this patch, pmu_battery was unable to report battery full status. This patch fixes the issue by adding a proper handling code into pmu_bat_get_property(): if we're on AC and the battery isn't charging, then the battery is considered full. Signed-off-by: Thomas Champagne <lafeuil@gmail.com> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-12-15Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: power_supply_sysfs: Handle -ENODATA in a special way wm831x_backup: Remove unused variables gta02: Set pcf50633 charger_reference_current_ma pcf50633: Query charger status directly pcf50633: Properly reenable charging when the supply conditions change pcf50633: Get rid of charging restart software auto-triggering pcf50633: introduces battery charging current control pcf50633: Add ac power supply class to the charger wm831x: Factor out WM831x backup battery charger
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-13mfd: Mask and unmask wm8350 IRQs on request and freeMark Brown
Bring the WM8350 IRQ API more in line with the generic IRQ API by masking and unmasking interrupts as they are requested and freed. This is mostly just a case of deleting the mask and unmask calls from the individual drivers. The RTC driver is changed to mask the periodic IRQ after requesting it rather than only unmasking the alarm IRQ. If the periodic IRQ fires in the period where it is reqested then there will be a spurious notification but there should be no serious consequences from this. The CODEC drive is changed to explicitly disable headphone jack detection prior to requesting the IRQs. This will avoid the IRQ firing with no jack set up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Convert wm8350 IRQ handlers to irq_handler_tMark Brown
This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix memleak in pcf50633_client_dev_registerLars-Peter Clausen
Since platform_device_add_data copies the passed data, the allocated subdev_pdata is never freed. A simple fix would be to either free subdev_pdata or put it onto the stack. But since the pcf50633 child devices can rely on beeing children of the pcf50633 core device it's much more elegant to get access to pcf50633 core structure through that link. This allows to get completly rid of pcf5033_subdev_pdata. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-03power_supply_sysfs: Handle -ENODATA in a special wayAnton Vorontsov
There are cases when some device can not report any meaningful value, e.g. TWL4030 charger can report voltage only when charging is active. In these cases drivers will return -ENODATA, and we shouldn't flood kernel log with error messages. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-11-27collie: add battery driverThomas Kunze
This driver is based on tosa_battery.c.
2009-11-17wm831x_backup: Remove unused variablesAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16pcf50633: Query charger status directlyPaul Fertser
Current scheme is fragile and is likely to go off sync, especially on batfull->adapter charging automatic MBC transition. Query the status bit every time we need it instead. We need to export another function to query for USB presence because we can't read anything from PCF50633 (via I2C) inside irq context and that is needed by usb gadgets. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16pcf50633: Properly reenable charging when the supply conditions changePaul Fertser
If chgmod == BATFULL, setting chgena has no effect. Datasheet says we need to set resume instead but when autoresume is used resume doesn't work. Clear and set chgena instead. This enables a user to force charging by re-plugging USB even when the charger entered Battery Full mode, might be handy before a long trip. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16pcf50633: Get rid of charging restart software auto-triggeringPaul Fertser
After reaching Battery Full condition MBC state machine switches back into charging mode when the battery voltage falls below 96% of a battery float voltage. The voltage drop in Li-Ion batteries is marginal (1-2%) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 75-80%. That is a desired behaviour recommended by battery manufacturers, don't mess with it. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16pcf50633: introduces battery charging current controlBalaji Rao
Implement a new sysfs attribute to allow changing MBC charging limit on the fly independently of usb current limit. It also gets set automatically every time usb current limit is changed. Limiting charging current also prevents violating USB specification in the case when the whole device is shut down and usb current limit is reset to the factory default by the pcf50633 state transition. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16pcf50633: Add ac power supply class to the chargerSean McNeil
This adds an appropriate ac power_supply class and shows usb only when at the appropriate current limit. Signed-off-by: Sean McNeil <sean@mcneil.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16wm831x: Factor out WM831x backup battery chargerMark Brown
The backup battery on WM831x is a separate IP block to the main PMU and is largely unrelated to the main supply functionality. Factor it out into a separate driver in order to reflect this and better support future hardware versions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-09-23Merge branch 'master' of ↵Anton Vorontsov
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/power/wm97xx_battery.c
2009-09-04power_supply: Add driver for the PMU on WM831x PMICsMark Brown
The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04ds2760_battery: Fix integer overflow for time_to_empty_nowDaniel Mack
On the device we're currently developing, battery sizes of ~2.8Ah and current flow of ~600mA are typical. With that values, the life_sec computation overflows due to the multiplication by 3600. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04wm97xx_battery: Convert to dev_pm_opsMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04wm97xx_battery: Use irq to detect charger stateMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04wm97xx_battery: Use platform_dataMarek Vasut
This patch converts the wm97xx-battery driver to use platform_data supplied by ac97 bus. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-07-30Merge git://git.infradead.org/users/cbou/battery-2.6.31Linus Torvalds
* git://git.infradead.org/users/cbou/battery-2.6.31: Add ds2782 battery gas gauge driver olpc_battery: Ensure that the TRICKLE bit is checked olpc_battery: Fix up eeprom read function
2009-07-30ds2760_battery: implement set_charged() featureDaniel Mack
The ds2760's internal current meter is not reliable enough as it has an inacurracy of around ~15%. Without any correction for that error, the current accumulator is couting up all the time, even though the battery is already fully charged and hence destroys the static information. The longer it is connected, the worse is the aberration. Fortunately, this can be corrected by the DS2760_CURRENT_OFFSET_BIAS register. Using the external power_supply_set_battery_charged() function, this register is now gauging the measurement. A delayed work is used to debounce flaky GPIO signals and to let the current value settle. Also see Maxim's application note AN4188. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Cc: Anton Vorontsov <cbou@mail.ru> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30power_supply: get_by_name and set_charged functionalityDaniel Mack
This adds a function that indicates that a battery is fully charged. It also includes functions to get a power_supply device from the class of registered devices by name reference. These can be used to find a specific battery to call power_supply_set_battery_charged() on. Some battery drivers might need this information to calibrate themselves. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Ian Molton <spyro@f2s.com> Cc: Anton Vorontsov <cbou@mail.ru> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30power_supply: EXPORT_SYMBOL cleanupsDaniel Mack
While I'm at it, cleanup the power supply code so that EXPORT_SYMBOL_GPL appears directly after the symbole declaration. checkpatch.pl wants it that way. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Ian Molton <spyro@f2s.com> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30ds2760_battery: add current_accum module parameterDaniel Mack
When connecting a ds2760 to a partly loaded battery the first time, there must be a way to bootstrap the current_accum value. Without that, the current capactity value is bogus until the battery is fully charged for the first time. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30ds2760_battery: handle full_active_uAh == 0 case correctlyDaniel Mack
In systems where the battery monitor is not part of the battery pack and is hence not bootstrapped with sane values, the full_active_uAh is likely to be zero. Handle that case by defaulting to the rated_capacity information which can be passed to the driver using the new module parameter. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30ds2760_battery: add rated_capacity module parameterDaniel Mack
For systems where the ds2760 is soldered directly on the PCB, the 'rated capacity' register is not set to anything useful. In order to allow users to bootstrap this value, introduce a new module parameter 'rated_capacity' and use it to write the internal EEPROM in case the value differes from what's been given. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30ds2760_battery: export more featuresDaniel Mack
Export POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW and POWER_SUPPLY_PROP_CAPACITY features to the power supply core. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30ds2760_battery: delay power supply registrationDaniel Mack
This fixes a race condition I recently introduced with the PMOD feature addition (cef437e3: "w1: ds2760_battery: add support for sleep mode feature"). Postpone the call to power_supply_register() to fix it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-14wm8350_power: Implement charge type propertyMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-12wm97xx_batery: replace driver_data with dev_get_drvdata()Alexander Beregalov
direct access of driver_data is going away. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02power_supply: Add a charge_type property, and use it for olpc driverAndres Salomon
This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Add an 'error' sysfs device that displays raw errorsAndres Salomon
Grab the error code from EC_BAT_ERRCODE and let the user see it (rather than attempting to decode it as we do with PROP_HEALTH) with a separate error sysfs file. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"Andres Salomon
This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01Add ds2782 battery gas gauge driverRyan Mallon
This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Ensure that the TRICKLE bit is checkedAndres Salomon
There are times when the battery is present but trickle charging, and the EC sets only the TRICKLE bit. So we must check for the bit when we're checking the charging/present status. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01olpc_battery: Fix up eeprom read functionAndres Salomon
The eeprom read function was placing values into the wrong place in 'buf'; we were starting from buf[off], rather than buf[0]. Also, the for loop that we were using was much uglier than it needed to be. This cleans it up a bit. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-09da9030_battery: Fix race between event handler and monitorMike Rapoport
There are cases when charging monitor and the event handler try to change the charger state simultaneously. For instance, a charger is connected to the system, there's the detection event and the event handler tries to enable charging. It is possible that the periodic charging monitor runs at the same time and it still thinks there's no external charger. So it tries to disable the charging. As the result, even if the conditions necessary to charge the battery hold, there will be no actual charging. The patch changes the event handler so that instead of enabling/ disabling the charger immediately it would rather make the monitor run. The monitor code then decides what should be the charger state. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-09Add MAX17040 Fuel Gauge driverMinkyu Kang
The MAX17040 is a I2C interfaced Fuel Gauge systems for lithium-ion batteries This patch adds support the MAX17040 Fuel Gauge Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-08w1: ds2760_battery: add support for sleep mode featureDaniel Mack
This adds support for ds2760's sleep mode feature. With this feature enabled, the chip enters a deep sleep mode and disconnects from the battery when the w1 line is held down for more than 2 seconds. This new behaviour can be switched on and off using a new module parameter. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-08ds2760_battery: cleanups in ds2760_battery_probe()Daniel Mack
Removed struct ds2760_platform_data which wasn't defined anywhere. Indentation cleanups. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-04-08Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: pda_power: Add optional OTG transceiver and voltage regulator support pcf50633_charger: Remove unused mbc_set_status function pcf50633_charger: Enable periodic charging restart
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-30trivial: Fix misspelling of "Celsius".Adam Buchbinder
A few comments say "Celcius"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-27ACPI: battery: add power_{now,avg} properties to power_classAlexey Starikovskiy
ACPI has smart batteries, which work in units of energy and measure rate of (dis)charge as power, thus it is not appropriate to export it as a current_now. Current_now will still be exported to allow for userland applications to match. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-12ds2760_battery.c: fix division by zeroDaniel Mack
The 'battery remaining capacity' calculation in drivers/power/ds2760_battery.c lacks a parameter check to a division operation which causes the kernel to oops on my board. [ 21.233750] Division by zero in kernel. [ 21.237646] [<c002955c>] (__div0+0x0/0x20) from [<c012561c>] (Ldiv0+0x8/0x10) [ 21.244816] [<c01bef34>] (ds2760_battery_read_status+0x0/0x2a4) from [<c01bf3a4>] (ds2760_battery_get_property+0x30/0xdc) [ 21.255803] r8:c03a22c0 r7:c7886100 r6:00000009 r5:c782fe7c r4:c7886084 [ 21.262518] [<c01bf374>] (ds2760_battery_get_property+0x0/0xdc) from [<c01bde98>] (power_supply_show_property+0x48/0x114) [ 21.273480] r6:c7996000 r5:00000009 r4:00000000 [ 21.278111] [<c01bde50>] (power_supply_show_property+0x0/0x114) from [<c01be158>] (power_supply_uevent+0x188/0x280) [ 21.288537] r8:00000001 r7:c7886100 r6:c7996000 r5:000000b4 r4:00000000 [ 21.295222] [<c01bdfd0>] (power_supply_uevent+0x0/0x280) from [<c015c664>] (dev_uevent+0xd4/0x10c) [ 21.304199] [<c015c590>] (dev_uevent+0x0/0x10c) from [<c0128440>] (kobject_uevent_env+0x180/0x390) [ 21.313170] r5:00000000 r4:c78860ac [ 21.316725] [<c01282c0>] (kobject_uevent_env+0x0/0x390) from [<c0128664>] (kobject_uevent+0x14/0x18) [ 21.325850] [<c0128650>] (kobject_uevent+0x0/0x18) from [<c01bdc34>] (power_supply_changed_work+0x5c/0x70) [ 21.335506] [<c01bdbd8>] (power_supply_changed_work+0x0/0x70) from [<c004d290>] (run_workqueue+0xbc/0x144) [ 21.345167] r4:c7812040 [ 21.347716] [<c004d1d4>] (run_workqueue+0x0/0x144) from [<c004d94c>] (worker_thread+0xa8/0xbc) [ 21.356296] r7:c7812040 r6:c7820b00 r5:c782ffa4 r4:c7812048 [ 21.361957] [<c004d8a4>] (worker_thread+0x0/0xbc) from [<c0051008>] (kthread+0x5c/0x94) [ 21.369971] r7:00000000 r6:c004d8a4 r5:c7812040 r4:c782e000 [ 21.375612] [<c0050fac>] (kthread+0x0/0x94) from [<c00403d0>] (do_exit+0x0/0x688) Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: Matt Reimer <mreimer@vpop.net> Acked-by: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-02pda_power: Add optional OTG transceiver and voltage regulator supportPhilipp Zabel
This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-02-02pcf50633_charger: Remove unused mbc_set_status functionBalaji Rao
The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>