summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/max77686.c
AgeCommit message (Collapse)Author
2014-03-10regulator: max77686: Remove regulator_dev array from state containerKrzysztof Kozlowski
Don't store array of regulator_dev returned by devm_regulator_register() in state container. It isn't used anywhere outside of max77686_pmic_probe() function. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20regulator: max77686: Remove redundant error messageSachin Kamat
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-18regulator: max77686: Add missing of_node_putSachin Kamat
Add of_node_put to decrement the ref count. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14regulator: max77686: Use of_get_child_by_nameSachin Kamat
of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: Remove redundant NULL assignmentSachin Kamat
NULL assignment corrupts the error pointer and is not necessary. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: max77686: Use devm_regulator_registerSachin Kamat
devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-12regulator: Remove unnecessary include of linux/delay.h from regulator driversAxel Lin
All the drivers that need delay for the regulator voltage output voltage to stabilize after being enabled or after being set to a new value has been converted to implement enable_time and set_voltage_time_sel callbacks. Then regulator core will take care of the necessary delay. This patch removes the unneeded include of linux/delay.h in regulator drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-28regulator: max77686: Don't update max77686->opmode if update register failsAxel Lin
Ensure max77686->opmode always has correct status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-02-14regulator: max77686: Reuse rdev_get_id() function.Thiago Farina
Signed-off-by: Thiago Farina <tfarina@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27regulator: max77686: Fix using wrong dev argument at various placesAxel Lin
Use &pdev->dev rather than iodev->dev for dev_err(). Use &pdev->dev rather than iodev->dev for devm_kzalloc() and of_regulator_match(), this fixes memory leak. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10Merge remote-tracking branch 'regulator/topic/max77686' into regulator-nextMark Brown
2012-11-20regulator: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-22regulator: max77686: Make max77686_enable() static.Yadwinder Singh Brar
This patch fixes a sparse warning. Since max77686_enable() is a callback,so it should be static. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: max77686: Add set_suspend_disable/set_suspend_mode callbacks.Yadwinder Singh Brar
This patch implements set_suspend_disable callback for BUCKs which support only switch ON/OFF modes during system suspend state, and set_suspend_mode callbacks for LDOs which also suport Low power mode and switch ON/OFF modes. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: max77686: Use already set opmode while re-enabling regulators.Yadwinder Singh Brar
This patch adds basic support to take care of opmode(if any) which can be set by set_suspend_[disable/mode] callbacks. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max77686: Use array to save pointer to rdevAxel Lin
MAX77686_REGULATORS is known in compile time. Use array to save pointer to rdev makes the code simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max77686: initialize of_node param for regulator registerAxel Lin
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06regulator: max77686: Initialise rmatch.of_node to NULL.Yadwinder Singh Brar
Now of_regulator_match() returns without finding the match if match->of_node is not NULL. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05regulator: max77686: Add device tree support.Yadwinder Singh Brar
This patch device tree support for regulator driver. It uses the parent (mfd's) DT node to parse the regulator data for max77686. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20regulator: max77686: Implement .set_ramp_delay() callbackYadwinder Singh Brar
This patch implements the .set_ramp_delay callback to set the ramp_delay on hardware for BUCK2/3/4 if ramp_delay is set in regulator constraints. This patch also do some cleaning work for unrequired members of struct max77686_data. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20regulator: max77686: Initialize regulator_configAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19regulator: max77686: Convert driver to use regulator_set_voltage_time_sel.Yadwinder Singh Brar
This patch converts the driver to use regulator_set_voltage_time_sel() as .set_voltage_time_sel() callback. It also sets ramp_delay as 100000 uV/us for LDOs & normal BUCKs and 27500 uV/us(default/reset value) for BUCKs[2/3/4] in regulator_desc[]. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11regulator: max77686: Fix the delay time for set_voltage_time_selAxel Lin
rdev->desc->uV_step * abs(new_selector - old_selector) returns uV. The unit of ramp_rate is mV/us. Thus 1000 should be multiplied. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11regulator: max77686: Check pdata->num_regulators earlierAxel Lin
If this driver only works when pdata->num_regulators == MAX77686_REGULATORS, let's check it earlier. Also remove unused num_regulators from struct max77686_data. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max77686: Fix checkpatch warningsAxel Lin
Fix below checkpatch warnings: $ scripts/checkpatch.pl -f drivers/regulator/max77686.c ERROR: return is not a function, parentheses are not required + return (DIV_ROUND_UP(rdev->desc->uV_step WARNING: line over 80 characters + .ops = &max77686_buck_dvs_ops, \ total: 1 errors, 1 warnings, 339 lines checked Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: max77686: Use regulator_map_voltage_linear for simple linear mappingsAxel Lin
Both max77686_ops and max77686_buck_dvs_ops use simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the defult regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: MAX77686: Add Maxim 77686 regulator driverJonghwa Lee
Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 00:11:11 +0000