summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2012-07-31regulator: Fix an s5m8767 build failureSamuel Ortiz
Due to a merge conflict we are getting this: drivers/regulator/s5m8767.c: In function ‘s5m8767_pmic_probe’: drivers/regulator/s5m8767.c:575:2: error: implicit declaration of function ‘s5m_reg_write’ [-Werror=implicit-function-declaration] This is fixed by fully converting this driver to the new s5m API. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-30Merge tag 'mfd-3.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...
2012-07-22Merge branch 'regulator-drivers' into regulator-nextMark Brown
2012-07-22Merge branches 'regulator-core', 'regulator-dt' and 'regulator-dummy' into ↵Mark Brown
regulator-next
2012-07-20regulator: add new lp8788 regulator driverKim, Milo
TI LP8788 PMU has 4 BUCKS and 22 LDOs. The voltage of BUCK1 and BUCK2 can be controlled by external gpios. And some LDOs also can be enabled by external gpios. The regmap interface is used for regulator operations. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulatorAxel Lin
This function does not exist, remove the extern function declaration. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20[SCSI] async: introduce 'async_domain' typeDan Williams
This is in preparation for teaching async_synchronize_full() to sync all pending async work, and not just on the async_running domain. This conversion is functionally equivalent, just embedding the existing list in a new async_domain type. The .registered attribute is used in a later patch to distinguish between domains that want to be flushed by async_synchronize_full() versus those that only expect async_synchronize_{full|cookie}_domain to be used for flushing. [jejb: add async.h to scsi_priv.h for struct async_domain] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-17regulator: tps65910: set input_supply on desc unconditionallyLaxman Dewangan
Set the supply_name in the regulator descriptor unconditionally and make this parameter as required parameter in the device node for successfully registration of the regulator. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-17regulator: palmas: Fix calcuating selector in palmas_map_voltage_smpsAxel Lin
The logic of calculating selector in palmas_map_voltage_smps() does not match the logic to list voltage in palmas_list_voltage_smps(). We use below equation to calculate voltage when selector > 0: voltage = (0.49V + (selector * 0.01V)) * RANGE RANGE is either x1 or x2 So we need to take into account with the multiplier set in VSEL register when calculating selector in palmas_map_voltage_smps() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-16regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data()Axel Lin
Pass regulator id rahter than the index to lp872x_find_regulator_init_data(), then the code can be simpler. We can also get max_regulators by lp->num_regulators. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-16regulator: twl: Fix list_voltate for twl6030ldo_opsAxel Lin
According to the datasheet, the voltage for twl6030ldo_ops is not linear for all cases. Linear mapping is only for the selection code from 00000001 to 00011000. Table 9. LDO Output Voltage Selection Code CODE VOUT(V) COD VOUT(V) CODE VOUT(V) CODE VOUT(V) 00000000 0 00001000 1.7 00010000 2.5 00011000 3.3 00000001 1.0 00001001 1.8 00010001 2.6 00011001 Reserved 00000010 1.1 00001010 1.9 00010010 2.7 00011010 Reserved 00000011 1.2 00001011 2.0 00010011 2.8 00011011 Reserved 00000100 1.3 00001100 2.1 00010100 2.9 00011100 Reserved 00000101 1.4 00001101 2.2 00010101 3.0 00011101 Reserved 00000110 1.5 00001110 2.3 00010110 3.1 00011110 Reserved 00000111 1.6 00001111 2.4 00010111 3.2 00011111 2.75 This patch implements the list_voltage callback based on above table. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-16mfd: Modify samsung mfd headerSangbeom Kim
As Prefix of Samsung pmic changed from s5m to s2m, To make common mfd driver for s2m and s5m series, This patch rename header of Samsung mfd and modify mfd driver. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Modify samsung mfd driver for common apiSangbeom Kim
Previous naming rule of samsung pmic start with s5m prefix. But It is changed by s2m. To cover various samsung s2m and s5m series, This patch modify function and variable name for common usage. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Rename s5m file and directories to samsungSangbeom Kim
Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-15regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_selAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldoAxel Lin
In twl6030ldo_set_voltage, current code use below formula to calculate vsel: vsel = (min_uV/1000 - 1000)/100 + 1; This is worng because when min_uV is 1000000 uV, vsel is 1. It should be 0 in this case. Fix it by change the equation to: (This equation is common for linear mapping) vsel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); In twl6030ldo_get_voltage, current code use below formula to calculate voltage: mV = 1000mv + 100mv * (vsel - 1) This is worng because when vsel is 0, mV is 900mV. Note the min_uV is 1000mV. Fix it by change the equation to: (This equation is common for linear mapping) return rdev->desc->min_uV + vsel * rdev->desc->uV_step; Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15regulator: s5m8767: Properly handle gpio_request failureAxel Lin
Convert to devm_gpio_request to save a few error handling code. This patch properly handle the gpio_request failure, we should return error when gpio_request fails rather than just show warning. I think one of the reason we got -EBUSY is because current code does not free gpios in s5m8767_pmic_remove(). So it got -EBUSY when reload the module. Yest another reason is in current code if gpio_request() returns error, the rest of the code still calls gpio_direction_output to config buck_gpios and buck_ds gpios. This looks wrong to me. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15regulator: max8997: Properly handle gpio_request failureAxel Lin
Convert to devm_gpio_request to save a few error handling code. This patch properly handle the gpio_request failure with -EBUSY, we should return error rather than ommit the gpio_request failure with -EBUSY. I think one of the reason we got -EBUSY is because current code does not free gpios in max8997_pmic_remove(). So it got -EBUSY when reload the module. Yest another reason is in current code if gpio_request() returns -EBUSY, the rest of the code still calls gpio_direction_output to config buck125_gpios and set gpio value in max8997_set_gpio(). This looks wrong to me. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15regulator: tps62360: use devm_* for gpio requestLaxman Dewangan
Use devm_ version of gpio APIs gpio_request_one() for requesting gpios. This avoid extra code for freeing gpios. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-15Merge tag 'v3.5-rc7' into regulator-driversMark Brown
Linux 3.5-rc7
2012-07-13regulator: tps6586x: add support for input supplyLaxman Dewangan
There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: tps65217: Add device tree supportAnilKumar Ch
This commit adds device tree support for tps65217 pmic. And usage details are added to device tree documentation. Driver is tested by using kernel module with regulator set and get APIs. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: aat2870: Remove unused min_uV and max_uV from struct ↵Axel Lin
aat2870_regulator Both min_uV and max_uV are not used in the code, remove them. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: aat2870: Convert to regulator_list_voltage_tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: da9052: initialize of_node param for regulator registerAxel Lin
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: Add REGULATOR_STATUS_UNDEFINED.Krystian Garbaciak
REGULATOR_STATUS_UNDEFINED is to be returned by regulator, if any other state doesn't really apply. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: Fix a typo in regulator_mode_to_status() core function.Krystian Garbaciak
Case REGULATOR_STATUS_STANDBY -> REGULATOR_MODE_STANDBY. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask ↵Axel Lin
is 0xff Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: s2mps11: Fix wrong setting for config.devAxel Lin
Currently s2mps11->iodev, s2mps11->dev and config.dev point to NULL. This patch fixes the settings for config.dev. Current code does not need the *dev and *iodev of struct s2mps11_info, so remove them. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: s2mps11: Fixup missing commasAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: tps65910: Remvoe ↵Axel Lin
tps65910_reg_[read|modify_bits|read_locked|write_locked] functions The tps65910 mfd driver has been converted to regmap APIs. This patch adds tps65910_reg_update_bits() in include/linux/mfd/tps65910.h. Thus we can use tps65910_reg_read/tps65910_reg_write/tps65910_reg_update_bits directly and remove tps65910_reg_[read|modify_bits|read_locked|write_locked] functions. With this change, we can also remove the mutex in struct tps65910_reg. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11regulator: s2mps11: Add samsung s2mps11 regulator driverSangbeom Kim
This patch add Samsung S2MPS11 regulator driver. The S2MPS11 can support 10 Bucks and 38 LDOs and RTC. Especially, S2MPS11 is designed for high performance Samsung application processor. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10regulator: tps65910: correct init value of n_voltagesLaxman Dewangan
Recent change in the core driver to get the maximum voltage is based on the (n_voltages -1) steps of voltage. For the tps65910, the (n_voltages -1)th step voltage is calculated based on the callback function list_voltage. This function direct maps the datasheet and adjust the first few steps for initial voltage as per datasheet, and hence initialize the n_voltages based on datasheet. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10regulator: max8952: Use core GPIO enable supportAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09regulator: max8998: Remove wrong set_suspend_[en|dis]able callback settingsAxel Lin
Using the same ops for both [en|dis]able and set_suspend_[en|dis]able callbacks is actively broken. This patch removes .set_suspend_disable and .set_suspend_enable callback setting. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09regulator: max8952: Remove wrong set_suspend_disable callback settingAxel Lin
Using the same ops for both .disable and .set_suspend_disable callbacks is actively broken. This patch removes .set_suspend_disable callback setting. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09regulator: da9052: Use for_each_child_of_node() macroAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09mfd: Register ab8500 devices using the newly DT:ed MFD APILee Jones
Now the MFD API is Device Tree aware we can use it for platform registration again, even when booting with DT enabled. To aid in Device Node pointer allocation we provide each cell with the associative compatible string. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Register db8500-prcmu devices using the newly DT:ed MFD APILee Jones
Now the MFD API is Device Tree aware we can use it for platform registration again, even when booting with DT enabled. To aid in Device Node pointer allocation we provide each cell with the associative compatible string. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-06regulator: max77686: Initialise rmatch.of_node to NULL.Yadwinder Singh Brar
Now of_regulator_match() returns without finding the match if match->of_node is not NULL. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06regulator: tps65910: add support for input supplyLaxman Dewangan
There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06regulator: core: Mark all DT based boards as having full constraintsMark Brown
Since DT doesn't provide an idiomatic mechanism for enabling full constraints and since it's much more natural with DT to provide them just assume that a DT enabled system has full constraints. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-05regulator: fixed: dt: support for input supplyLaxman Dewangan
Add support for input supply in DT parsing of node. The input supply will be provided by the property "vin-supply" in the regulator node. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05regulator: max77686: Add device tree support.Yadwinder Singh Brar
This patch device tree support for regulator driver. It uses the parent (mfd's) DT node to parse the regulator data for max77686. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05regulator: ab3100: Use rdev_get_drvdata() rather than use reg->reg_data driectlyAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05regulator: ab3100: Set enable enable_time in regulator_descAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05regulator: core: remove sysfs entry properly in regulator_putShawn Guo
With changes introduced by commit 222cc7b (regulator: core: Allow multiple requests of a single supply mapping) on create_regulator, regulator_put needs a corresponding update on sysfs entry removing. Also regulator->dev still needs to get assigned in create_regulator, otherwise, sysfs_remove_link call in regulator_put will get bypassed. Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04regulator: arizona-micsupp: Force regulated mode until we have API supportMark Brown
It's almost certainly what the user would expect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04regulator: ad5398: Fix min/max current limit boundary checkingAxel Lin
It is ok to request current limit with min_uA < chip->min_uA and max_uA > chip->max_uA. We need to set min_uA = chip->min_uA if (min_uA < chip->min_uA), this ensures the equation to calcuate selator does not return negative number. Also set max_uA = chip->max_uA if (max_uA > chip->max_uA), as suggested by Sonic. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>