summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2010-12-13regulator: Update LDO2 for WM8958Mark Brown
LDO2 has a slightly different range of supported voltages on WM8958 so update the selector<->voltage mappings to match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-09regulator: tps6586x: correct register tableDanny Huang
Correct the register table for SM2, LDO8, RTC Change-Id: I45348cec5ffbb7da9bd7523764fb611b537236b8 Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-09regulator: tps6586x: Handle both enable reg/bits being the sameDanny Huang
Change-Id: I40400bb65eab496bb1becd26b37a9653b99d4f41 Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> (Split into separate patches) Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-09regulator: tps6586x: Fix TPS6586X_DVM to store goreg/bitDanny Huang
Change-Id: Idacf5e1e51dbbbcd5ea93f310a4e907977e7359e Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> (Split into separate patches) (Minor formatting fixes) Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-09regulator: tps6586x: Add missing bit mask generationDanny Huang
Change-Id: I76eaceb31b56264f6978af15db1e6fc7e2e01b5a Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> (Split into separate patches) Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: fix kernel-doc for set_consumer_device_supplyRandy Dunlap
Fix kernel-doc warning for set_consumer_device_supply(): Warning(drivers/regulator/core.c:912): missing initial short description on line: * set_consumer_device_supply: Bind a regulator to a symbolic supply Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: enable supply regulator only when use count is zeroBengt Jonsson
Supply regulators are disabled only when the last reference count is removed on the child regulator (the use count goes from 1 to 0). This patch changes the behaviour of enable so the supply regulator is enabled only when the use count of the child regulator goes from 0 to 1. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: twl-regulator - fix twlreg_set_modeAxel Lin
The Singular Message is 16 bits: DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] Current implementation return immedially after sucessfuly write MSB part. To properly set mode, we need to write the complete message ( MSB and LSB ). In twl.h, now we have defines for PM Master module register offsets, use it instead of hard coded 0x15/0x16. Use "message & 0xff" to ensure we send correct value for LSB. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lesly Arackal Manuel <leslyam@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: lock supply in regulator enableMattias Wallin
This patch add locks around regulator supply enable. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Return proper error for regulator_register()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Ensure enough delay time for enabling regulatorAxel Lin
Integer division will truncate the result, this patch ensures we have enough delay time for enabling regulator. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Remove a redundant device_remove_file call in create_regulatorAxel Lin
We already have device_remove_file() in error path, no need to call it before goto link_name_err. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Staticise mc13783_powermisc_rmw()Mark Brown
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: regulator disable supply fixMattias Wallin
This patch fixes a disable failure when regulator supply is used. A while loop in regulator disable checks for supply pointer != NULL but the pointer is not always updated, resulting in the while loop running too many times causing a disable failure. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-29regulator: max8998 BUCK1/2 voltage change with use of GPIOsLukasz Majewski
max8998_pmic_probe: - modified to check if valid pins are defined at platform data - maximal voltage values (predefined at platform data) are uploaded to max8998 device max8998_set_voltage_buck: - BUCK1/2 voltages change between values already defined - Checks if valid GPIO pins are passed from platform data - If requested voltage cannot be satisfied from already defined values, then one of free slots is used - Predefined maximum voltages (as defined at platform data) are always available Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29regulator: max8998 BUCK1/2 internal voltages and indexes definedLukasz Majewski
BUCK1/2 internal voltages and indexes defined in the struct max8998_data max_get_voltage_register now uses index values to chose proper register More generic BUCK1/2 registers names provided Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29regulator: Separate set_voltage for max8998 ldo and buckLukasz Majewski
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Use i2c_client as an argument on MAX8998 i2c routinesJoonyoung Shim
The MAX8998 chip have regulator and rtc features. The i2c slave address of regulator and rtc is different, so needs each i2c client on i2c operation functions. Also, this patch exports i2c operation functions instead of callback to make easy to read. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-28regulator: max8952 - fix max8952_set_voltageAxel Lin
In current implementation, vid is declared as u8, then "vid == -1" is always false, and "vid >= 0" is always true. Thus change it to s8. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28regulator: max8952 - fix max8952_pmic_probe error pathAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28regulator: fix build when CONFIG_REGULATOR_DUMMY=nAnand Gadiyar
Commit f03f91826 (regulator: Add option for machine drivers to enable the dummy regulator) in the regulators tree seems to have introduced the following build break when CONFIG_REGULATOR_DUMMY is disabled. Fix this. CC drivers/regulator/dummy.o drivers/regulator/dummy.c:41: error: redefinition of 'regulator_dummy_init' drivers/regulator/dummy.h:28: note: previous definition of 'regulator_dummy_init' was here make[2]: *** [drivers/regulator/dummy.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28regulator: avoid deadlock when disabling regulator with supplyJeffrey Carlyle
I have a regulator A that sets regulator B as its supply. When I call set_supply to add B as the supply for A, regulator A gets added to the supply_list for regulator B. When I call regulator_disable(A), I end up with a call chain like this: regulator_disable(A) > mutex_lock(A) > _regulator_disable(A) >> _regulator_disable(B) >>> _notifier_call_chain(B) >>>> mutex_lock(A) Which results in dead lock since we are trying to acquire the mutex lock for regulator A which we already hold. This patch addresses this issue by moving the call to disable regulator B outside of the lock aquired inside the initial call to regulator_disable. This change also addresses the issue of not acquiring the mutex for regulator B before calling _regulator_disable(B). Signed-off-by: Jeffrey Carlyle <jeff.carlyle@motorola.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28regulator: Add option for machine drivers to enable the dummy regulatorMark Brown
Allow machine drivers to explicitly enable the use of the dummy regulator, enabling simpler support for systems with only a few specific supplies visible to software. It is strongly recommended that this is not used on systems with substantial software control over their PMICs, for maximum functionality constrints should be as fully specified as possible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28Regulator: lp3972 cleanupAxel Lin
This patch includes below fixes based on Mark's comment. - Return actual error if i2c_smbus_read_byte_data() fail - Add spaces around bitwise AND operator(&) to improve readability - Add comment to explain why we need to update voltage change control register for LDO1 and LDO5 - Logging the value for diagnostics if chip reported incorrect voltage value - Add __devinit annotation for setup_regulators() - Show system control register1 value if the value is mismatched - Logging the value for diagnostics if failed to detect device Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28Regulator: LP3972 PMIC regulator driverAxel Lin
This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28MAX8952 PMIC Driver Initial ReleaseMyungJoo Ham
MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-07Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: of/i2c: Fix module load order issue caused by of_i2c.c i2c: Fix checks which cause legacy suspend to never get called i2c-pca: Fix waitforcompletion() return value i2c: Fix for suspend/resume issue i2c: Remove obsolete cleanup for clientdata
2010-10-02regulator: max8649 - fix setting extclk_freqAxel Lin
The SYNC bits are BIT6 and BIT7 of MAX8649_SYNC register. pdata->extclk_freq could be [0|1|2]. (MAX8649_EXTCLK_26MHZ|MAX8649_EXTCLK_13MHZ|MAX8649_EXTCLK_19MHZ) It requires to left shift 6 bits to properly set extclk_freq. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02regulator: fix typo in current unitsCyril Chemparathy
This patch fixes a typo that incorrectly reports mA numbers as uA. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02regulator: fix device_register() error handlingVasiliy Kulikov
If device_register() fails then call put_device(). See comment to device_register. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-06regulator: wm8350-regulator - fix the logic of checking ↵Axel Lin
REGULATOR_MODE_STANDBY mode In wm8350_dcdc_set_mode(), we set DCx_SLEEP bit of WM8350_DCDC_SLEEP_OPTIONS register for REGULATOR_MODE_STANDBY mode. ( DCx_SLEEP bits: 0: Normal DC-DC operation 1: Select LDO mode ) In wm8350_dcdc_get_mode(), current logic to determinate REGULATOR_MODE_STANDBY mode is just reverse. ( sleep is set should mean REGULATOR_MODE_STANDBY mode. ) Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and ↵Axel Lin
REGULATOR_MODE_STANDBY modes Problem description in current implementation: When setting REGULATOR_MODE_IDLE mode, current implementation set WM831X_LDO1_LP_MODE bit of ctrl_reg (which is wrong, it should clear the bit). But due to a missing break statement for case REGULATOR_MODE_IDLE, the code fall through to case REGULATOR_MODE_STANDBY and then clear WM831X_LDO1_LP_MODE bit. So it still looks OK when checking the status by wm831x_gp_ldo_get_mode(). When setting REGULATOR_MODE_STANDBY mode, it just does not work. wm831x_gp_ldo_get_mode() will still return REGULATOR_MODE_IDLE because the accordingly WM831X_LDO1_LP_MODE bit is clear. Correct behavior should be: Clear WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_IDLE mode. Set WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_STANDBY mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-05regulator: ab8500 - fix off-by-one value range checking for selectorAxel Lin
selector is used as array index of info->supported_voltages Thus the valid value range should be 0 .. info->voltages_len -1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-05regulator: 88pm8607 - fix value range checking for accessing info->vol_tableAxel Lin
In choose_voltage(), we use i as array index of info->vol_table. The valid value range for i should be 0 .. ARRAY_SIZE(info->vol_table) - 1. Take LDO1 as example, ARRAY_SIZE(LDO1_table) is 4, vol_nbits of LDO1 is 2. for (i = 0; i < (2 << info->vol_nbits); i++) is equivalent to for (i = 0; i < 8; i++) which is wrong. The same value range checking also applies for index in pm8607_list_voltage(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: isl6271a-regulator - fix regulator_desc parameter for ↵Axel Lin
regulator_register() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ad5398 - fix a memory leakAxel Lin
In current implementation, the address return from regulator_register() is different from the address for regulator_unregister(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: set max8998->dev to &pdev->dev.Axel Lin
max8998->dev is NULL in current implementation, set it to &pdev->dev. regulator_register() still return success if max8998->dev is NULL, but rdev->dev.parent will be set to NULL which is incorrect. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6586x-regulator - fix bit_mask parameter for tps6586x_set_bits()Axel Lin
The third parameter of tps6586x_set_bits() is the bit_mask, thus we should use (1 << ri->go_bit) instead of ri->go_bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6586x-regulator - fix value range checking for valAxel Lin
val is used as array index of ri->voltages. Thus the valid value range should be 0 .. ri->desc.n_voltages - 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max8998 - set max8998->num_regulatorsAxel Lin
Set max8998->num_regulators = pdata->num_regulators, otherwise it's default value is 0. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max8998 - fix memory allocation size for max8998->rdevAxel Lin
We only use max8998->rdev[0] .. max8998->rdev[pdata->num_regulators-1], max8998->rdev[pdata->num_regulators] is not used. Thus fix the memory allocation size. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6507x - remove incorrect commentsAxel Lin
This driver is a platform driver, not a i2c driver. Thus remove incorrect tps6507x_remove comments. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max1586 - improve the logic of choosing selectorAxel Lin
A little bit improvement in the logic of choosing selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ab8500 - fix the logic to remove already registered regulators in ↵Axel Lin
error path In current implementation, ab8500_regulator_info[0].regulator is not unregistered if the error happen at i > 0. This patch fixes the resource leak and also improves the readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ab3100 - fix the logic to remove already registered regulators in ↵Axel Lin
error path In current implementation, ab3100_regulators[0].rdev is not unregistered if the error happen at i > 0. This patch fixes the resource leak and also improves the readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator/ab8500: move dereference below the check for NULLDan Carpenter
I moved the dereference of "ab8500" below the check for NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: Remove default DEBUG define from TPS6586xMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probeAxel Lin
We should call platform_set_drvdata() before calling platform_get_drvdata(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 12:51:55 +0000