summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)Author
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits) [SCSI] fix oops during scsi scanning [SCSI] libsrp: fix memory leak in srp_ring_free() [SCSI] libiscsi, bnx2i: make bound ep check common [SCSI] libiscsi: add completion function for drivers that do not need pdu processing [SCSI] scsi_dh_rdac: changes for rdac debug logging [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach [SCSI] sg: fix oops in the error path in sg_build_indirect() [SCSI] mptsas : Bump version to 3.04.12 [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off [SCSI] mptsas : Sanity check for phyinfo is added [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530 [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller [SCSI] qla2xxx: Update version number to 8.03.01-k6. [SCSI] qla2xxx: Properly delete rports attached to a vport. [SCSI] qla2xxx: Correct various NPIV issues. [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly. ...
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-11[S390] tape: Use pr_xxx instead of dev_xxx in shared driver codeMichael Holzheu
For messages from the tape core that is shared between the 3590 and 34xx tape disciplines, we want to have the "tape" prefix instead of "tape_3590" or "tape_34xx". In order to fix this, we now use the pr_xxx printk macros. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] Get rid of cpuid.h header file.Heiko Carstens
Merge cpuid.h header file into cpu.h. While at it convert from typedef to struct declaration and also convert cio code to use proper lowcore structure instead of casts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: Fix device online messagesMichael Holzheu
Currently, when a tape device is set online and no cartridge is loaded, we get the messages "The tape cartridge has been successfully unloaded" and "Determining the size of the recorded area". These messages are not correct. To fix this, we now print the "cartridge loaded/unloaded" messages only, when the load/unload event really occurs. In addition to that, the message "Determining the size of the recorded area" is only printed, if a cartridge is loaded. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] kvm: use console_initcall() to initialize s390 virtio consoleHendrik Brueckner
Use a console_initcall() to initialize the s390 virtio console and clean up s390 console initialization in setup.c. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: reversed order of labelsRoel Kluin
Fix the order of goto labels in tape_generic_online. Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
2009-09-11[S390] zcrypt: Free ap_device if dev_set_name fails.Felix Beck
If dev_set_name fails during scanning the AP bus, the reserved memory has to be freed. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] zcrypt: Use spin_lock_bh in suspend callbackFelix Beck
Fix lock dependency warning. inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. bash/1442 [HC0[0]:SC0[0]:HE1:SE1] takes: (&ap_dev->lock){+.?...}, at: [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] {IN-SOFTIRQ-W} state was registered at: [<000000000017f094>] __lock_acquire+0xb78/0x182c [<000000000017fe8e>] lock_acquire+0x146/0x178 [<0000000000549cf2>] _spin_lock+0x5a/0x98 [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] [<000003e001280afe>] ap_poll_all+0xaa/0x1a4 [ap] [<000000000014fa82>] tasklet_action+0xfe/0x1f4 [<0000000000150a56>] __do_softirq+0x116/0x284 [<0000000000111058>] do_softirq+0xe4/0xe8 [<00000000001504ba>] irq_exit+0xba/0xd8 [<00000000003dd04a>] do_IRQ+0x176/0x1fc [<000000000011823c>] io_return+0x0/0x8 [<0000004bfbfd2c0e>] 0x4bfbfd2c0e Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] xpram: Remove checksum validation for suspend/resumeMichael Holzheu
Currently in the suspend process checksums for the XPRAM partitions are created and stored. During the resume process it is checked, if the checksums are still the same. If this is not the case, a kernel panic is triggered. Unfortunately this prevents XPRAM from beeing used as suspend device, because in this case after the checksum has been created, the memory image is written to XPRAM and therefore the contents of the suspend partition is changed. In order to allow XPRAM to be used as suspend device, this patch removes the checksum validation. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] vmur: Invalid allocation sequence for vmur classMichael Holzheu
The vmur class is allocated after the CCW driver is registered and it is destroyed before the CCW driver is unregistered. This is not the correct sequence, because the vmur class can be used via driver core callbacks that are triggered during the CCW driver deregistration. For Example: 1. vmur device is online 2. vmur module is unloaded This leads to the following function call stack: <4> [<0000000000387286>] device_destroy+0x36/0x5c <4> [<000003e000209714>] ur_set_offline_force+0x9c/0x10c [vmur] <4> [<000003e00020a928>] ur_remove+0x64/0xbc [vmur] <4> [<00000000003e4d2e>] ccw_device_remove+0x42/0x1ac <4> [<000000000038a1aa>] __device_release_driver+0x9a/0xe4 <4> [<000000000038a2da>] driver_detach+0xe6/0xec <4> [<0000000000388ee4>] bus_remove_driver+0xc0/0x108 <4> [<000003e00020ad5a>] ur_exit+0x52/0x84 [vmur] In device_destroy() the vmur class is used. Since it is already freed, this can lead to a kernel panic. To fix the problem, the vmur class has to be allocated before the CCW driver is registered and destroyed after the CCW driver has ben unregistered. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] add call home supportHans-Joachim Picht
Signed-off-by: Hans-Joachim Picht <hans@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] tape: use init_timer_on_stack() rather than init_timer()Frank Munzert
With CONFIG_DEBUG_OBJECTS_TIMERS=y "chccwdev --online" for a tape device will fail with message "ODEBUG: object is on stack, but not annotated". We now use init_timer_on_stack. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] proper use of device registerSebastian Ott
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: fix message namingStefan Haberland
This patch fixes message naming so that generic dasd messages do not contain the device discipline. For this purpose the dev_ makros are replaced by pr_ makros for generic dasd messages. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: optimize cpu usage in goodcaseStefan Haberland
remove unnecessary dbf call, remove string operations for magic Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] dasd: fail requests when device state is less then readyStefan Weinhuber
A DASD device that is not ready or online has no defined disk layout, so all requests that arrive in such a state need to be returned as failed. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: remove ccw_device init_nameSebastian Ott
We used the init_name to set the console ccw_device's name early at the boot stage. This patch moves the name setting (for all ccw devices) to the point where we actually register the device. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: move final put_device to ccw_device_unregisterSebastian Ott
We use a test_and_clear_bit to prevent a device from being unregistered twice. Unfortunately in this cases the "final" put_device (from device_initialize) was issued more than once, resulting in an use after free error. Fix this by moving this put_device to ccw_device_unregister. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: remove subchannel init_nameSebastian Ott
We used the init_name to set the console subchannels name early at the boot stage. With the patch cio: fix memleak in subchannel validation we moved the name setting to the point where we actually register the console subchannel. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix memleak in subchannel validationSebastian Ott
When scanning for new subchannels we have a code path where we allocate memory for a struct subchannel, set the device name (which is dynamically allocated now) and do a check if the underlying device is blacklisted - if so we free the subchannel structure. Since we have not set up refcounting at this stage, the device name's memory is lost. Fix this by moving the dev_set_name after the blacklist test. Note: With this patch the init_name for the console subchannel becomes virtually obsolete. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix use after free in s390 debug featureSebastian Ott
When using s390dbf with "%s" in sprintf format strings the string itself is not copied to the dbf buffer. Since in this case only pointers are stored in the s390dbf, we should not use dev_name - which is bound to the lifetime of the device. Reading this entry from s390dbf after the device was released will cause an use after free error. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] qdio: remove limited number of debugfs entriesJan Glauber
The number of qdio debugfs entries was limited. Remove this limit and group the queue files in a per device directory. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: failing set online/offline processing.Michael Ernst
When unit checks trigger sensing the device state is set to W4SENSE until sense completion; then the device state is set back to ONLINE. If a unit check occurs while set online or set offline requests are processed then it might happen that the device's temporary W4SENSE state causes these functions to terminate, leaving the device in an inconsistent state when the state is set back to ONLINE later on so that the device cannot be set online or offline any longer. To solve this, set online/offline and related rollback or error routines are processed only if the device is in a final or DISCONNECTED state. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: ensure to hold a reference for deferred deregistrationSebastian Ott
Ensure to always hold an extra device reference for scheduling a subchannel deregistration, by moving the get_device to ccw_device_schedule_sch_unregister. This fixes an use after free error in ccw_device_call_sch_unregister where put_device was called on an already freed device structure. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] qdio: continue polling if the queue is not finishedJan Glauber
With commit c38f96080955854e54df9cb392bc674e1ae330e1 polling was stopped for the queue even if new data is available. Return immediately after scheduling the queue tasklet if the queue is not done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: increase trace levelSebastian Ott
Move debug traces for start I/O and interrupt events to exclusive trace levels. Also change tracing in hot-path from sprintf (costly) to hex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix not oper handling after failed [on|off]line processingSebastian Ott
If online/offline processing of a ccw device fails, resulting in not operational state, notify the driver and unregister the device in case the driver dosn't want to keep it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: consolidate subchannel intparm resetPeter Oberparleiter
Ensure that the hardware interruption parameter for a subchannel is reset when the associated subchannel data structure is freed. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: move scsw helper functions to header fileHeiko Carstens
All scsw helper functions are very short and usage of them shouldn't result in function calls. Therefore we move them to a separate header file. Also saves a lot of EXPORT_SYMBOLs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] cio: fix ineffective verify eventPeter Oberparleiter
Path verification events occurring for offline devices are currently ignored. As a result, offline devices are not removed, even though they might no longer be accessible (for example because the last path to the device was varied offline). Fix this by scheduling a status evaluation for the affected subchannel when a path verification event occurs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-05[SCSI] zfcp: optimize zfcp_qdio_accountHeiko Carstens
Remove expensive ktime_get()/ktime_us_delta() functions from the hot path and use get_clock_monotonic() instead. This elimates seven function calls and avoids a lot of unnecessary calculations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Remove duplicated code for debug timestampsChristof Schmitt
The timestamp calculation used for s390dbf output is the same in a private zfcp function and in debug.c. Replace both with a common inline function. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Handle failures during device allocation correctlyChristof Schmitt
dev_set_name tries to allocate memory, so check the return value for allocation failures. After dev_set_name succeeds, call device_register as next step to be able to use put_device during error handling. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: proper use of device registerSebastian Ott
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Replace config semaphore with mutexChristof Schmitt
The config semaphore is only used as a mutex, so replace it with a simple mutex. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Defer resource allocation to first ccw_set_online callChristof Schmitt
So far, zfcp allocated all resources required for FCP adapters/subchannels when the device was discovered in the ccw_probe callback. If there are lots of unused FCP subchannels attached to a system, this is a waste of resources. To alleviate this, defer the resource allocation to the first call to ccw_set_online. To avoid disruptions during possible following calls to ccw_set_offline and then ccw_set_online, keep the adapter resources until the device is finally being removed via ccw_remove. While doing this, also manage the zfcp erp thread together with all other adapter resources in zfcp_adapter_enqueue/dequeue. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Simplify and update ct/gs and els timeout handlingChristof Schmitt
The recommendation for a timeout of 2 * R_A_TOV is the same for ct/gs and els requests, so set it in the common function used for initializing both request types. Besides, the timer inside zfcp should only run longer than the timeout set for the channel, so 10 seconds more should be enough (instead of 60 seconds). Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Use kthread API for zfcp erp threadChristof Schmitt
Switch the creation of the zfcp erp thread from the deprecated kernel_thread API to the kthread API. This allows also the removal of some flags in zfcp since the kthread API handles thread creation and shutdown internally. To allow the usage of the kthread_stop function, replace the erp ready semaphore with a waitqueue for waiting until erp actions arrive on the ready queue. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: resolve false usage of dd_data in fc_rportSwen Schillig
The fc_rport structure reserves a reference where a LLD can put information required in a situation where the fc transport class is triggering LLD callbacks. The zfcp driver was using this variable directly which is discouraged. This patch solves this issue by making this reference unnecessary. In addition the dev_loss_tmo callback is removed, it is not required: zfcp does not access the fc_rport after calling fc_remote_port_delete. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Apply common naming conventions to zfcp_fcSwen Schillig
Update the Fibre Channel related code to use the zfcp_fc prefix. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: introduce _setup, _destroy for qdio and FCSwen Schillig
Extract independent data structures and introduce common _setup and _destroy routines for QDIO and Fibre Channel related data structures Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Update dbf callsSwen Schillig
Change the dbf data and functions to use the zfcp_dbf prefix throughout the code. Also change the calls to dbf to use zfcp_dbf instead of zfcp_adapter. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Decouple gid_pn requests from erpChristof Schmitt
Don't let the erp wait for gid_pn requests to complete. Instead, queue the gid_pn work, exit erp and let the finished gid_pn work trigger a new port reopen. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Move qdio related data out of zfcp_adapterSwen Schillig
The zfcp_adapter structure was growing over time to a size of almost one memory page. To reduce the size of the data structure and to seperate different layers, put all qdio related data in the new zfcp_qdio data structure. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Separate qdio attributes from zfcp_fsf_reqSwen Schillig
Split all qdio related attributes out of zfcp_fsf_req and put it in new structure. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Move workqueue to adapter structSwen Schillig
Remove the global driver work queue and replace it with a workqueue local to the adapter. The usage of this workqueue makes this the correct place for the structure. In addition multiple adapters won't block each other due to the serialization of the queued work. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Remove the useless ZFCP_REQ_AUTO_CLEANUP flagSwen Schillig
The flag ZFCP_REQ_AUTO_CLEANUP was useless as the ZFCP_STATUS_FSFREQ_CLEANUP flag is there for exactly the same purpose. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Improve request allocation through mempoolsSwen Schillig
Remove the special case for NO_QTCB requests and optimize the mempool and cache processing for fsfreqs. Especially use seperate mempools for the zfcp_fsf_req and zfcp_qtcb structs. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>