summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/Makefile
AgeCommit message (Collapse)Author
2008-02-23[SCSI] mvsas: Add Marvell 6440 SAS/SATA driverJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] ses: add new Enclosure ULDJames Bottomley
This adds support to SCSI for enclosure services devices. It also makes use of the enclosure services added in an earlier patch to display the enclosure topology in sysfs. At the moment, the enclosures are SAS specific, but if anyone actually has a non-SAS enclosure that follows the SES-2 standard, we can add that as well. On my Vitesse based system, the enclosures show up like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/ total 0 -r--r--r-- 1 root root 4096 2008-02-03 15:44 components lrwxrwxrwx 1 root root 0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 000 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 001 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 002 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 003 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 004 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 005 lrwxrwxrwx 1 root root 0 2008-02-03 15:44 subsystem -> ../../enclosure --w------- 1 root root 4096 2008-02-03 15:44 uevent And the individual occupied slots like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/ total 0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 active lrwxrwxrwx 1 root root 0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault -rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate -rw-r--r-- 1 root root 4096 2008-02-03 15:45 status lrwxrwxrwx 1 root root 0 2008-02-03 15:45 subsystem -> ../../../enclosure_component -r--r--r-- 1 root root 4096 2008-02-03 15:45 type --w------- 1 root root 4096 2008-02-03 15:45 uevent You can flash the various blinky lights by echoing to the fault and locate files. >From the device's point of view, you can see it has an enclosure like this: sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/ block:sda generic queue_depth state bsg:0:0:0:0 iocounterbits queue_type subsystem bus iodone_cnt rescan timeout delete ioerr_cnt rev type device_blocked iorequest_cnt scsi_device:0:0:0:0 uevent driver modalias scsi_disk:0:0:0:0 vendor enclosure_component:SLOT 001 model scsi_generic:sg0 evt_media_change power scsi_level Note the enclosure_component:SLOT 001 which shows where in the enclosure this device fits. The astute will notice that I'm using SCSI VPD Inquiries to identify the devices. This, unfortunately, won't work for SATA devices unless we do some really nasty hacking about on the SAT because the only think that knows the SAS addresses for SATA devices is libsas, not libata where the SAT resides. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] remove m68k NCR53C9x based driversJames Bottomley
These drivers depend on the deprecated NCR53C9X core and need to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] dec_esp: Remove driverJames Bottomley
This driver depends on the deprecated NCR53C9X core and needs to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] mca_53c9x: remove driverJames Bottomley
This driver depends on the deprecated NCR53C9X core and needs to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] sun3x_esp: convert to esp_scsiThomas Bogendoerfer
Converted sun3x_esp driver to use esp_scsi.c Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] make pcmcia directory use obj-y|m instead of subdir-y|mTejun Heo
subdir-y|m isn't supposed to contain modules or built-in components. Change subdir-$(CONFIG_PCMCIA) to obj-$(CONFIG_PCMCIA). Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] seagate: Remove driverBoaz Harrosh
- Apparently no one wonts this driver, and no one is willing to fix it for future changes to SCSI. So remove it, and if someone wants it in the future He can revive it with the needed fixes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] psi240i: remove driverBoaz Harrosh
The psi240i driver is still written for cmnd->request_buffer as a char pointer to actual data. There was never any attempt to use the scatterlist option. - remove all source files (3) from drivers/scsi - Remove from Makefile and Kconfig Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-17[SCSI] fc4: remove this and all associated driversMatthew Wilcox
This code has been slowly rotting for about eight years. It's currently impeding a few SCSI cleanups, and nobody seems to have hardware to test it any more. I talked to Dave Miller about it, and he agrees we can delete it. If anyone wants a software FC stack in future, they can retrieve this driver from git. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] add srp transport classFUJITA Tomonori
This adds srp transport class that works with ib_srp and ibmvscsi. It creates only /sys/class/{srp_host,srp_remote_ports} and srp_remote_ports has only "port_id" attribute. viola:/sys/class/srp_remote_ports/port-0:1# ls device port_id subsystem uevent viola:/sys/class/srp_remote_ports/port-0:1# cat port_id 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21ps3: BD/DVD/CD-ROM Storage DriverGeert Uytterhoeven
Add a BD/DVD/CD-ROM Storage Driver for the PS3: - Implemented as a SCSI device driver - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-14[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMACornelia Huck
With dma-mapping-prevent-dma-dependent-code-from-linking-on.patch scsi fails to build on !HAS_DMA architectures: drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map': : undefined reference to `dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap': : undefined reference to `dma_unmap_sg' I split those functions out into a new file. Builds on s390 and i386. Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] CONFIG_SCSI_FD_8xx no longer existsGeert Uytterhoeven
CONFIG_SCSI_FD_8xx no longer exists. Apparently it was renamed to CONFIG_SCSI_SEAGATE, but the Makefile was not correctly updated. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] 53c700: Amiga Zorro NCR53c710 SCSIKars de Jong
New driver for Amiga Zorro bus NCR53c710 SCSI controllers, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] 53c700: Amiga 4000T NCR53c710 SCSIKars de Jong
New driver for the Amiga 4000T built-in NCR53c710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] 53c700: m68k MVME16x NCR53C710 SCSIKars de Jong
New driver for the MVME16x NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSIKars de Jong
New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] Merge up to linux-2.6 headJames Bottomley
Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29[SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_espDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] jazz_esp: Converted to use esp_core.Thomas Bogendoerfer
Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-27[SCSI] 53c7xx: kill driverChristoph Hellwig
It's been more than enough time now to try to get the new m68k drivers into the tree. Let's remove the old ones and we can remerge the new glue once it's ready. Given that there are patches to rename two out of the three drivers in m68k CVS and all of them need a lot of codingstyle love anyway that's probably the better strategy to begin with. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kars de Jong <jongk@linux-m68k.org> Cc: linux-m68k@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22[SCSI] jazz_esp: converted to use esp_coreThomas Bogendoerfer
Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits) [SCSI] fusion: fix domain validation loops [SCSI] qla2xxx: fix regression on sparc64 [SCSI] modalias for scsi devices [SCSI] sg: cap reserved_size values at max_sectors [SCSI] BusLogic: stop using check_region [SCSI] tgt: fix rdma transfer bugs [SCSI] aacraid: fix aacraid not finding device [SCSI] aacraid: Correct SMC products in aacraid.txt [SCSI] scsi_error.c: Add EH Start Unit retry [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test. [SCSI] ipr: Driver version to 2.3.2 [SCSI] ipr: Faster sg list fetch [SCSI] ipr: Return better qc_issue errors [SCSI] ipr: Disrupt device error [SCSI] ipr: Improve async error logging level control [SCSI] ipr: PCI unblock config access fix [SCSI] ipr: Fix for oops following SATA request sense [SCSI] ipr: Log error for SAS dual path switch [SCSI] ipr: Enable logging of debug error data for all devices [SCSI] ipr: Add new PCI-E IDs to device table ...
2007-04-27[SCSI] SUNESP: Complete driver rewrite to version 2.0David S. Miller
Major features: 1) Tagged queuing support. 2) Will properly negotiate for synchronous transfers even on devices that reject the wide negotiation message, such as CDROMs 3) Significantly lower kernel stack usage in interrupt handler path by elimination of function vector arrays, replaced by a top-level switch statement state machine. 4) Uses generic scsi infrastructure as much as possible to avoid code duplication. 5) Automatic request of sense data in response to CHECK_CONDITION 6) Portable to other platforms using ESP such as DEC and Sun3 systems. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-20[SCSI] make scsi_wait_scan always modularJames Bottomley
Currently scsi_wait_scan is only built modular if SCSI is modular. However, it's perfectly possible for a built in SCSI still to have modular drivers and thus need scsi_wait_scan as a module. Therefore, scsi_wait_scan should always be built as a module (unless the kernel doesn't support modules). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] SNI RM 53c710 driverThomas Bogendoerfer
This patch adds a SCSI driver for the onboard 53c710 chip of some SNI RM machines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] scsi tgt: IBM eServer i/pSeries virtual SCSI target driverFUJITA Tomonori
This is IBM Virtual SCSI target driver for tgt. The driver is based on the original ibmvscsis driver: http://lkml.org/lkml/2005/10/17/99 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] scsi tgt: SCSI RDMA Protocol library functionsFUJITA Tomonori
libsrp provides helper functions for SRP target drivers. Some SRP target drivers would be out of drivers/scsi/ so we added an entry for libsrp in drivers/scsi/Kconfig. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25[SCSI] scsi-ml: Makefile and Kconfig changes for tgtFUJITA Tomonori
Makefile and Kconfig for tgt. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-11[SCSI] Add ability to scan scsi busses asynchronouslyMatthew Wilcox
Since it often takes around 20-30 seconds to scan a scsi bus, it's highly advantageous to do this in parallel with other things. The bulk of this patch is ensuring that devices don't change numbering, and that all devices are discovered prior to trying to start init. For those who build SCSI as modules, there's a new scsi_wait_scan module that will ensure all bus scans are finished. This patch only handles drivers which call scsi_scan_host. Fibre Channel, SAS, SATA, USB and Firewire all need additional work. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04[SCSI] Initial Commit of qla4xxxDavid Somayajulu
open-iSCSI driver for Qlogic Corporation's iSCSI HBAs Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: Doug Maxey <dwm@bubba.enoyolf.org> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-24Merge branch 'master' into upstreamJeff Garzik
2006-09-02[SCSI] SCSI and FC Transport: add netlink support for posting of transport ↵James Smart
events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] Add Promise SuperTrak driverJeff Garzik
Add Promise SuperTrak 'stex' driver, supporting SuperTrak EX8350/8300/16350/16300 controllers. The controller's firmware accepts SCSI commands, handing them to the underlying RAID or JBOD disks. The driver consisted of the following cleanups and fixes, beyond its initial submission: Ed Lin: stex: cleanup and minor fixes stex: add new device ids stex: update internal copy code path stex: add hard reset function stex: adjust command timeout in slave_config routine stex: use more efficient method for unload/shutdown flush Jeff Garzik: [SCSI] Add Promise SuperTrak 'shasta' driver. Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX"). [SCSI] stex: update with community comments from 'Promise SuperTrak' thread [SCSI] stex: Fix warning, trim trailing whitespace. [SCSI] stex: remove last remnants of "shasta" project code name [SCSI] stex: removed 6-byte command emulation [SCSI] stex: minor cleanups [SCSI] stex: minor fixes: irq flag, error return value [SCSI] stex: use dma_alloc_coherent() Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29[SCSI] aic94xx: new driverJames Bottomley
This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-10Move libata to drivers/ata.Jeff Garzik
2006-07-28[SCSI] arcmsr: initial driver, version 1.20.00.13Erich Chen
arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-25Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
2006-06-22Merge branch 'master' into upstreamJeff Garzik
Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
2006-06-22IB/iser: iSER Kconfig and MakefileOr Gerlitz
Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-10[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driverHighPoint Linux Team
HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host Adapters. Fixes from original submission: Merge Andrew Morton's patches: - Provide locking for global list - Fix debug printks - uninline function with multiple callsites - coding style fixups - remove unneeded casts of void* - kfree(NULL) is legal - Don't "succeed" if register_chrdev() failed - otherwise we'll later unregister a not-registered chrdev. - Don't return from hptiop_do_ioctl() with the spinlock held. - uninline __hpt_do_ioctl() Update for Arjan van de Ven's comments: - put all asm/ includes after the linux/ ones - replace mdelay with msleep - add pci posting flush - do not set pci command reqister in map_pci_bar - do not try merging sg elements in hptiop_buildsgl() - remove unused outstandingcommands member from hba structure - remove unimplemented hptiop_abort() handler - remove typedef u32 hpt_id_t Other updates: - fix endianess Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-18Merge branch 'master'Jeff Garzik
2006-04-14Merge ../scsi-rc-fixes-2.6James Bottomley
Conflicts: include/scsi/scsi_devinfo.h Same number for two BLIST flags: BLIST_MAX_512 and BLIST_ATTACH_PQ3 Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] iscsi: add libiscsiMike Christie
There is a lot of code duplcited between iscsi_tcp and the upcoming iscsi_iser driver. This patch puts the duplicated code in a lib. There is more code to move around but this takes care of the basics. For iscsi_offload if they use the lib we will probably move some things around. For example in the queuecommand we will not assume that the LLD wants to do queue_work, but it is better to handle that later when we know for sure what iscsi_offload looks like (we could probably do this for iscsi_iser though to). Ideally I would like to get the iscsi_transports modules to a place where all they really have to do is put data on the wire, but how to do that will hopefully be more clear when we see other modules like iscsi_offload. Or maybe iscsi_offload will not use the lib and it will just be iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that is allowed in mainline. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] remove qlogicfcJames Bottomley
All participants agree that qla2xxx can now successfully replace this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-02[PATCH] libata: separate out libata-eh.cTejun Heo
A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22scsi: link in the debug driver lastLinus Torvalds
If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-09[libata] Move PCI IDE BMDMA-related code to new file libata-bmdma.c.Jeff Garzik
2006-01-14Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds