summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid/aachba.c
AgeCommit message (Collapse)Author
2012-11-27[SCSI] aacraid: SCSI dma mapping failure case handlingMahesh Rajashekhara
This patch handles SCSI dma mapping failure case. Reporting error code to the upper layer instead of BUG_ON(). Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] aacraid: Series 7 Async. (performance) mode supportMahesh Rajashekhara
- Series 7 Async. (performance) mode support added - New scatter/gather list format for Series 7 - Driver converts s/g list to a firmware suitable list for best performance on Series 7, this can be disabled with driver parameter "aac_convert_sgl" for testing purposes - New container read/write command structure for Series 7 - Fast response support for the SCSI pass-through path added - Async. status response buffer changes Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllersMahesh Rajashekhara
Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller familyMahesh Rajashekhara
Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family. - new src.c file for 0x28b specific functions - new XPORT header required - sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT) - async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status - changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: prohibit access to array container spaceRajashekhara, Mahesh
Problem description: -------------------- The issue reported by one of the customer was able to read LBA beyond the array reported size with "sg_read" utility. If N is the last block address reported, then should not be able to read past N, i.e. N+1. But in their case, reported last LBA=143134719. So should not have been able to read with LBA=143134720, but it is read without failure, which means reported size to the OS is not correct and is less than the actual last block address. Solution: --------- Firmware layer exposes lesser container capacity than the actual one. It exposes [Actual size - Spitfire space(10MB)] to the OS, IO's to the 10MB should be prohibited from the Linux driver. Driver checks LBA boundary, if its greater than the array reported size then sets sensekey to HARDWARE_ERROR and sends the notification to the MID layer. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: add support for handling ATA pass-through commands.Rajashekhara, Mahesh
There are two conditions for ATA pass thru command that falls into 'SRB_STATUS_ERROR' condition. 1. When the "CC" bit is set by the host in ATA pass-through CDB - Even for the successful completion, SCSI target shall generate check condition. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_OK to the mid layer. Below is the snippet of existing code which fills a result code of SAM_STAT_CHECK_CONDITION: *********************************** if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; .......... ************************************ 2. When the "CC" bit is reset by the host and if SCSI target generates a check condition when an error occurs. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_ERROR to the mid layer. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: expose physical devices for models with newer firmwareRajashekhara, Mahesh
The default driver setting is "expose_physicals=0", which means raw physical drives are not exposed to OS. If the user wants to expose connected physical drives, enable "expose_physicals" module parameter. With the new JBOD firmware, physical drives are not available for "expose_physicals>0". In function "aac_expose_phy_device", modified to reset the appropriate bit in the first byte of inquiry data. This fix exposes the connected physical drives. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] aacraid: fix File System going into read-only modePenchala Narasimha Reddy Chilakala, ERS-HCLTech
These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03[SCSI] aacraid driver updateLeubner, Achim
changes: - set aac_cache=2 as default value to avoid performance problem (Novell bugzilla #469922) - Dell/PERC controller boot problem fixed (RedHat bugzilla #457552) - WWN flag added to fix SLES10 SP1/SP2 drive detection problems - 64-bit support changes - DECLARE_PCI_DEVICE_TABLE macro added - controller type changes Signed-off-by: Achim Leubner <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] Clean up my email address and use a single standard address for ↵Alan Cox
everything Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-09block: unify request timeout handlingJens Axboe
Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-02[SCSI] aacraid: Add Power Management supportMark Salyzyn
For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-16[SCSI] aacraid: Do not describe check_reset parameter with its valuePaul Bolle
Describe check_reset parameter with its name (and not its value) Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] aacraid: use sg buffer copy helper functionsFUJITA Tomonori
This replaces aac_internal_transfer with scsi_sg_copy_to/from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] aacraid: READ_CAPACITY_16 shouldn't trust allocation length in cdbFUJITA Tomonori
When aacraid spoofs READ_CAPACITY_16, it assumes that the data length in the sg list is equal to allocation length in cdb. But sg can put any value in scb so the driver needs to check both the data length in the sg list and allocation length in cdb. If allocation length is larger than the response length that the driver expects, it clears the data buffer in the sg list to zero but it doesn't need to do. Just setting resid is fine. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aacraid: ignore adapter reset check polaritySalyzyn, Mark
The Adapter's Ignore Reset flag and insmod parameter boolean polarity is incorrect in the driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aacraid: add optional MSI supportSalyzyn, Mark
Added support for MSI utilizing the aacraid.msi=1 parameter. This patch adds some localized or like-minded janitor fixes. Since the default is disabled, there is no impact on the code paths unless the customer wishes to experiment with the MSI performance. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] aacraid: do not set valid bit in sense informationSalyzyn, Mark
Luben Tuikov [mailto:ltuikov@yahoo.com] sez: > Just as in your case and Tony's case, which I presume > uses the same RAID firmware vendor, it would've > probably been better if the RAID firmware vendor > fixed the firmware to not set the VALID bit if the > INFORMATION field is not valid. Point taken regarding the aacraid driver. Dropped the VALID bit, and then did some cleanup/simplification of the set_sense procedure and the associated parameters. Mike did some preliminary tests when the VALID bit was dropped before the 'Re: [PATCH] [SCSI] sd: make error handling more robust' patches came on the scene. The change in the SCSI subsystem does make this enclosed aacraid patch unnecessary, so this aacraid patch is merely post battle ground cleanup. If the simplification is an issue, repugnant, too much for a back-port to the stable trees or clouds the point, this patch could be happily distilled down to: diff -ru a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c --- a/drivers/scsi/aacraid/aachba.c 2008-02-06 16:26:45.834938955 -0500 +++ b/drivers/scsi/aacraid/aachba.c 2008-02-06 16:32:01.109035329 -0500 @@ -865,7 +865,7 @@ u32 residue) { - sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */ + sense_buf[0] = 0x70; /* Sense data invalid, err code 70h (current error) */ sense_buf[1] = 0; /* Segment number, always zero */ if (incorrect_length) { Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: add Voodoo Lite class of cards.Salyzyn, Mark
The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: remove pigs in spaceSalyzyn, Mark
I was amazed at how much embedded space was present in the aacraid driver source files. Just selected five files from the set to clean up for now and the attached patch swelled to 73K in size! - Removed trailing space or tabs - Removed spaces embedded within tabs - Replaced leading 8 spaces with tabs - Removed spaces before ) - Removed ClusterCommand as it was unused (noticed it as one triggered by above) - Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION. - Replaced a long series of spaces with tabs - Replaced some simple if...defined() with ifdef/ifndef Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: replace '<?:' with min_t()Salyzyn, Mark
The promised min_t() cleanup. Purely cosmetic. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZEFUJITA Tomonori
This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in several LLDs. It's a preparation for the future changes to remove sense_buffer array in scsi_cmnd structure. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: SMC vendor identificationSalyzyn, Mark
Due to an internal limit associated with the AdapterTypeText field, SMC required a product ID that overloaded the combined vendor and product ID. A decision was made to ship the SMC products without a vendor string dropping the defacto space that used to delineate vendor and product to boot. To correct this, we needed to adjust the code in the driver to parse out the vendor and product strings for the adapter. We match of 'AOC' in the AdapterTypeText, if so we set the vendor to SMC and place the entire AdapterTypeText into the product field. This only affects the cosmetic presentation of the Adapter vendor and product in the logs and in sysfs. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: add call to flush_kernel_dcache_pageSalyzyn, Mark
Some architectures require a call to flush_kernel_dcache_page for processor spoofed DMA operations. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: fix big endian issuesSalyzyn, Mark
Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: variable redefinition hides earlier warningSalyzyn, Mark
The parameter 'info' is reused, renamed the second to sinfo to represent supplemental adapter info, to suppress compile warning message. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: add sysfs report of RAID levelSalyzyn, Mark
Report the RAID level string for the SCSI device representing the array. Report is in /sys/class/scsi_device/#:#:#:#/device/level. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policySalyzyn, Mark
aacraid.cache parameter, Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery not protecting adapter supplied Cache e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE commands if the adapter has reported that it's cache is battery backed up. This parameter permits experimentation with tradeoffs between performance and caching policy. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] aacraid: fix driver failure with Dell PowerEdge Expandable RAID ↵Salyzyn, Mark
Controller 3/Di As reported in http://bugzilla.kernel.org/show_bug.cgi?id=3D9133 it was discovered that the PERC line of controllers lacked a key 64 bit ScatterGather capable SCSI pass-through function. The adapters are still capable of 64 bit ScatterGather I/O commands, but these two can not be mixed. This problem was exacerbated by the introduction of the SCSI Generic access to the DASD physical devices. The fix for users before this patch is applied is aacraid.dacmode=3D0 on the kernel command line to disable 64 bit I/O. The enclosed patch introduces a new adapter quirk and tries to limp along by enabling pass-through in situations where memory is 32 bit addressable on 64 bit machines, or disable the pass-through functions altogether. I expect that the check for 32 bit addressable memory to be controversial in that it can be incorrect in non-Dell non-Intel systems that PERC would never be installed under, the alternative is to disable pass-through in all cases which could be reported as another regression. Pass-through is used for SCSI Generic access to the physical devices, or for the management applications to properly function. In systems where this patch has disabled pass-through because it is unsupportable in combination with I/O performance, the user can choose to enable pass-through by turning off dacmode (aacraid.dacmode=3D0) or limiting the discovered kernel memory (mem=3D4G) with an associated loss in runtime performance. If we chose instead to turn off 64 bit dacmode for the adapters with this quirk, then this would be reported as another regression. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] aacraid: don't assign cpu_to_le32(int) to u8Christoph Hellwig
On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] aacraid: forced reset overrideSalyzyn, Mark
Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12[SCSI] aacraid: rename check_resetAndrew Morton
Too generic, clashes with ISDN. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-28[SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checkingSalyzyn, Mark
Customer running an application that issues SYNCHRONIZE_CACHE calls directly noticed the broad stroke of the current implementation in the aacraid driver resulting in multiple applications feeding I/O to the storage causing the issuing application to stall for long periods of time. By only waiting for the current WRITE commands, rather than all commands, to complete; and those that are in range of the SYNCHRONIZE_CACHE call that would associate more tightly with the issuing application before telling the Firmware to flush it's dirty cache, we managed to reduce the stalling. The Firmware itself still flushes all the dirty cache associated with the array ignoring the range, it just does so in a more timely manner. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27[SCSI] aacraid: draw line in sand, sundry cleanup and version updateSalyzyn, Mark
Minor unimportant cuttings from the floor bundled in with a version stamp update. Only controversial change is the dropping of Alan Cox copyright on the nark.c module since that file has no code written by him in it. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] aacraid: add vpd to inquirySalyzyn, Mark
Report VPD inquiry page 0x80 with an unique array creation serial number (CUID). When an array is created, the metadata stored on the physical drives gets an unique serial number. This serial number remains constant through array morphing or migration to other controllers. This patch is a forward port and modification to survive morphing and migration operations, of a similar piece of (un-attributed author) code added to the SLES10 SP1 aacraid driver. To test the results of the patch, observe that /dev/disk/by-id/ entries will show up for the arrays resulting from the udev rules. Also, as per the udev rules, 'scsi_id -g -x -a -s /block/sd? -d /dev/sd?' will report the ID_SERIAL as constructed from the inquiry data. It was reported to me that the 'ADPT' leading the serial number was bad form, that the inquiry vendor field was enough to differentiate the storage uniquely. Subsequent search found that another Adaptec AAC based driver reported the 8 hex serial number only without such adornments, so dropped ADPT to match. Resubmitting the patch with this alteration. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] aacraid: correct valid container response in management ioctlSalyzyn, Mark
During an Adapter Initiated scan request, the query disk ioctl reports a value of 2 rather than 1 for the valid field. This presents a problem for some legacy management applications. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-19[SCSI] aacraid: add support for long serial number informationSalyzyn, Mark
Support displaying long serial number information. Reuse sysfs handler internally as helper. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-19[SCSI] aacraid: change srb status busy returnSalyzyn, Mark
This patch is more like a spelling correction than a fix. It was discovered that if we had a busy status return from the Adapter for the SCSI srb command to a physical component, that we returned DID_NO_CONNECT rather than what one would expect DID_BUS_BUSY. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] aacraid: add user initiated resetSalyzyn, Mark
Add the ability for an application to issue a hardware reset to the adapter via sysfs. Typical uses include restarting the adapter after it has been flashed. Bumped revision number for the driver and added a feature to periodically check the adapter's health (check_interval), update the adapter's concept of time (update_interval) and block checking/resetting of the adapter (check_reset). Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] aacraid: probe related code cleanupSalyzyn, Mark
Sundry cleanups: 1) Use kzalloc instead of kmalloc. 2) Make sure probe worked before recalling the SCSI command to finalize processing. 3) _aac_probe_container2 and _aac_probe_container1 return value goes unused, change return to void. 4) Use a lower depth pointer reference to pick up the driver instance variable. 5) Although effectively unused except to fake for scsicmd validity, set the scsi_done in probe code to aac_probe_container_callback1 instead of the less valid dummy reference to _aac_probe_container1. 6) SCp.phase is set in aac_valid_context, drop setting up this value in caller when unnecessary. 7) take container target id at the beginning, rather than referencing scmd_id() to pick it up. There should be no side effects or functionality changes. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] aacraid: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>