summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/device_handler
AgeCommit message (Collapse)Author
2012-09-24[SCSI] scsi_dh_alua: Enable STPG for unavailable portsBart Van Assche
A quote from SPC-4: "While in the unavailable primary target port asymmetric access state, the device server shall support those of the following commands that it supports while in the active/optimized state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence enable sending STPG to a target port group that is in the unavailable state. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] scsi_dh_rdac : minor return fix for rdacMoger, Babu
Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] scsi_dh_rdac : Consolidate rdac strings togetherMoger, Babu
This patch consolidates the strings together. Purpose is to remove minor product strings extensions. That way the future products with similar strings should not require change here. Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] scsi_dh_rdac: Add a new netapp vendor/product stringMoger, Babu
This patch adds a new vendor/product strings for netapp E series product. Also consolidated the strings together with similar names. Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh: add scsi_dh_attached_handler_nameMike Snitzer
Introduce scsi_dh_attached_handler_name() to retrieve the name of the scsi_dh that is attached to the scsi_device associated with the provided request queue. Returns NULL if a scsi_dh is not attached. Also, fix scsi_dh_{attach,detach} function header comments to document @q rather than @sdev. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: Re-enable STPG for unavailable portsBart Van Assche
A quote from SPC-4: "While in the unavailable primary target port asymmetric access state, the device server shall support those of the following commands that it supports while in the active/optimized state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence re-enable sending STPG to a target port group that is in the unavailable state. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: backoff alua rtpg retry linearly vs. geometricallyRob Evers
Currently the backoff algorithm for when to retry alua rtpg requests progresses geometrically as so: 2, 4, 8, 16, 32, 64... seconds. This progression can lead to un-needed delay in retrying alua rtpg requests when the rtpgs are delayed. A less aggressive backoff algorithm that is additive would not lead to such large jumps when delays start getting long, but would backoff linearly: 2, 4, 6, 8, 10... seconds. Signed-off-by: Martin George <marting@netapp.com> Signed-off-by: Rob Evers <revers@redhat.com> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: retry alua rtpg extended header for illegal request ↵Rob Evers
response Some storage arrays are known to return 'illegal request' when an rtpg extended header request is made. T10 says the array should ignore the bit, and return the non-extended rtpg as the array doesn't support the request. Working around this by retrying the rtpg request without the extended header bit set when the extended rtpg request results in illegal request. Signed-off-by: Rob Evers <revers@redhat.com> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: implement 'implied transition timeout'Rob Evers
During alua transitions, an array can return transitioning status in response to rtpg requests. These requests get retried for a maximum of 60 seconds by default before timing out. Sometimes this timeout isn't sufficient to allow the array to complete the transition. T10-spc4 addresses this under 'Report Target Port Groups' command. This update retrieves the timeout value from the storage array if available and retries the transitioning rtpgs for up to the 'implied transitioning timeout' value Signed-off-by: Rob Evers <revers@redhat.com> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] scsi_dh_alua: Optimize the STPG commandMoger, Babu
This patch optimizes the set target port group(STPG) command. During our testing, we found that it is not optimal to send stpg command every time the path group switch happens. This patch uses PREF (preferred target port) bit with combination of flags passed by multipath user level tool to optimize this behaviour. If PREF bit is set then it issues a STPG command, otherwise it will let implicit transfer take place. By default there is no change in the behaviour. User tool needs to pass the parameter to make this change take effect. Patch has been tested on NetApp E series storage. Signed-off-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] scsi_dh_alua: Store the PREF bit from RTPGMoger, Babu
PREF bit indicates preferred target port group for accessing a logical unit. This bit is used to optimize the STPG command handling. Signed-off-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] scsi_dh_alua: Inroduce the set_params interface scsi_dh_alua handlerMoger, Babu
Handler expects only one parameter to set the flag ALUA_OPTIMIZE_STPG. This flag is used to optimize the STPG behaviour. There is no change in behaviour by default. For example, to set the flag pass the following parameters from multipath.conf hardware_handler "2 alua 1" Signed-off-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-22[SCSI] scsi_dh_rdac: Fix for unbalanced reference countMoger, Babu
This patch fixes an unbalanced refcount issue. Elevating the lock for both kref_put and also for controller node deletion. Previously, controller deletion was protected but the not the kref_put. This was causing the other thread to pick up the controller structure which was already kref'd zero. This was causing the following WARN_ON and also sometimes panic. WARNING: at lib/kref.c:43 kref_get+0x2d/0x30() (Not tainted) Hardware name: IBM System x3655 -[7985AC1]- Modules linked in: fuse scsi_dh_rdac autofs4 nfs lockd fscache nfs_acl auth_rpcgss sunrpc 8021q garp stp llc ipv6 ib_srp(U) scsi_transport_srp scsi_tgt ib_cm(U) ib_sa(U) ib_uverbs(U) ib_umad(U) mlx4_ib(U) mlx4_core(U) ib_mthca(U) ib_mad(U) ib_core(U) dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath uinput bnx2 ses enclosure sg ibmpex ibmaem ipmi_msghandler serio_raw k8temp hwmon amd64_edac_mod edac_core edac_mce_amd shpchp i2c_piix4 ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif sata_svw pata_acpi ata_generic pata_serverworks aacraid radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod [last unloaded: freq_table] Pid: 13735, comm: srp_daemon Not tainted 2.6.32-71.el6.x86_64 #1 Call Trace: [<ffffffff8106b857>] warn_slowpath_common+0x87/0xc0 [<ffffffff8106b8aa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8125c39d>] kref_get+0x2d/0x30 [<ffffffffa01b4029>] rdac_bus_attach+0x459/0x580 [scsi_dh_rdac] [<ffffffff8135232a>] scsi_dh_handler_attach+0x2a/0x80 [<ffffffff81352c7b>] scsi_dh_notifier+0x9b/0xa0 [<ffffffff814cd7a5>] notifier_call_chain+0x55/0x80 [<ffffffff8109711a>] __blocking_notifier_call_chain+0x5a/0x80 [<ffffffff81097156>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8132bec5>] device_add+0x515/0x640 [<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0 [<ffffffff8134f659>] scsi_sysfs_add_sdev+0x89/0x2c0 [<ffffffff8134d096>] scsi_probe_and_add_lun+0xea6/0xed0 [<ffffffff8134beb2>] ? scsi_alloc_target+0x292/0x2d0 [<ffffffff8134d1e1>] __scsi_scan_target+0x121/0x750 [<ffffffff811df806>] ? sysfs_create_file+0x26/0x30 [<ffffffff8132b759>] ? device_create_file+0x19/0x20 [<ffffffff81332838>] ? attribute_container_add_attrs+0x78/0x90 [<ffffffff814b008c>] ? klist_next+0x4c/0xf0 [<ffffffff81332e30>] ? transport_configure+0x0/0x20 [<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0 [<ffffffff8134df40>] scsi_scan_target+0xd0/0xe0 [<ffffffffa02f053a>] srp_create_target+0x75a/0x890 [ib_srp] [<ffffffff8132a130>] dev_attr_store+0x20/0x30 [<ffffffff811df145>] sysfs_write_file+0xe5/0x170 [<ffffffff8116c818>] vfs_write+0xb8/0x1a0 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff8116d251>] sys_write+0x51/0x90 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] scsi_dh_alua: Retry the check-condition in case Mode Parameters ChangedMoger, Babu
This patch adds a check-condition in scsi_dh_alua handler for a retry. Sometimes, I have seen attach failing due to this check-condition with following error messages on NetApp E series storage. Dec 7 15:31:01 nilgiris kernel: [102979.696673] scsi 3:0:2:9: alua: port group 00 rel port 01 Dec 7 15:31:01 nilgiris kernel: [102979.697082] scsi 3:0:2:9: alua: rtpg failed with 8000002 Dec 7 15:31:01 nilgiris kernel: [102979.697086] scsi 3:0:2:9: alua: rtpg sense code 06/2a/01 Dec 7 15:31:01 nilgiris kernel: [102979.697088] scsi 3:0:2:9: alua: not attached Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] scsi_dh_rdac: Fix error pathRichard Weinberger
If create_singlethread_workqueue() failes, rdac_init should fail too. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: "Moger, Babu" <Babu.Moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] scsi_dh: code cleanup and remove the references to scsi_dev_infoMoger, Babu
All the handlers have now implemented the match function so We don't need to use scsi_dev_info any more for matching purposes. Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] scsi_dh_rdac: Adding the match function for rdac device handlerMoger, Babu
This patch introduces the match function for rdac device handler. Without this, sometimes handler attach fails during the device_add. Included check for TPGS bit before proceeding further. The match function was introduced by commit 6c3633d08acf514e2e89aa95d2346ce9d64d719a Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] scsi_dh_hp_sw: Adding the match function for hp_sw device handlerMoger, Babu
This patch introduces the match function for hp_sw device handler. Included the check for TPGS bit before proceeding further per Hannes comment. The match function was introduced by commit 6c3633d08acf514e2e89aa95d2346ce9d64d719a Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] scsi_dh_emc: Add a match function for emc device handlerMoger, Babu
This patch introduces the match function for emc device handler. Included check for TPGS bit before proceeding further. The match function was introduced by commit 6c3633d08acf514e2e89aa95d2346ce9d64d719a Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03[SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commandsMoger, Babu
This patch corrects the retry interval for alua rtpg command. Purpose was to retry the commands in seconds. But that was not happening. Reason is msleep takes argument in milliseconds. Also added minor text after successful attach. Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31[SCSI] scsi_dh: check queuedata pointer before proceeding furtherMoger, Babu
This patch validates sdev pointer in scsi_dh_activate before proceeding further. Without this check we might see the panic as below. I have seen this panic multiple times.. Call trace: #0 [ffff88007d647b50] machine_kexec at ffffffff81020902 #1 [ffff88007d647ba0] crash_kexec at ffffffff810875b0 #2 [ffff88007d647c70] oops_end at ffffffff8139c650 #3 [ffff88007d647c90] __bad_area_nosemaphore at ffffffff8102dd15 #4 [ffff88007d647d50] page_fault at ffffffff8139b8cf [exception RIP: scsi_dh_activate+0x82] RIP: ffffffffa0041922 RSP: ffff88007d647e00 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000093c5 RDX: 00000000000093c5 RSI: ffffffffa02e6640 RDI: ffff88007cc88988 RBP: 000000000000000f R8: ffff88007d646000 R9: 0000000000000000 R10: ffff880082293790 R11: 00000000ffffffff R12: ffff88007cc88988 R13: 0000000000000000 R14: 0000000000000286 R15: ffff880037b845e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #5 [ffff88007d647e38] run_workqueue at ffffffff81060268 #6 [ffff88007d647e78] worker_thread at ffffffff81060386 #7 [ffff88007d647ee8] kthread at ffffffff81064436 #8 [ffff88007d647f48] kernel_thread at ffffffff81003fba Signed-off-by: Babu Moger <babu.moger@netapp.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] scsi_dh_alua: Add one more check-condition for alua handlerMoger, Babu
This patch adds one more check-condition for scsi_dh_alua handler. Without this, the handler attach fails sometimes during the discovery. I have noticed this with NetApp E-Series storage with alua mode. Also removed some unnecessary brackets {} for consistency. Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-22[SCSI] scsi_dh_rdac: Adding NetApp as a brand name for rdacChauhan, Vijay
Signed-off-by: Vijay Chauhan <Vijay.chauhan@netapp.com> Reviewed-by: Bob Stankey <Robert.stankey@netapp.com> Reviewed-by: Babu Moger <Babu.moger@netapp.com> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-22[SCSI] scsi_dh_rdac: Adding couple more vendor product idsMoger, Babu
This patch adds couple more Vendor/Product IDs for RDAC.. There are no functional changes. Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh_alua: Decrease retry intervalHannes Reinecke
The alua device handler starts the first retry after 10 seconds, and increases it times 10 for each round. This leads to an unnecessary delay. This patch modifies it to start after one second, and increase by a factor of two. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh_alua: Fix Erroneous TPG ID checkHannes Reinecke
For Target Portal Group IDs occupying the full 2 bytes in the RTPG response, the following group_id check in the alua_rtpg routine always fails in scsi_dh_alua.c: if (h->group_id == (ucp[2] << 8) + ucp[3]) { This causes the ALUA handler to wrongly identify the AAS of a specified device as well as incorrectly interpreting the supported AAS of the target as seen by the following entries in the /var/log/messages: "alua: port group 3ea state A supports tousna" "alua: port group 3e9 state A supports tousna" This is because 'ucp' is wrongly declared in alua_rtpg as a character pointer instead of an unsigned character pointer. Signed-off-by: Martin George <marting@netapp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh: Check for sdev state in store_dh_state()Hannes Reinecke
Avoid attaching a hardware handler to a device which is already scheduled for deletion. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh_alua: always update TPGS status on activateHannes Reinecke
When activating a patch we should always update the TPGS state as it might have changed in between. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh: Implement match callback functionHannes Reinecke
Some device handler types are not tied to the vendor/model but rather to a specific capability. Eg ALUA is supported if the 'TPGS' setting in the standard inquiry is set. This patch implements a 'match' callback for device handler which supersedes the original vendor/model lookup and implements the callback for the ALUA handler. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh: Fixup kernel-doc commentsHannes Reinecke
Fixup some kernel-doc comments to reference to the correct function name. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-30[SCSI] scsi_dh_alua: Evaluate TPGS setting from inquiry dataHannes Reinecke
Instead of issuing a standard inquiry from within the alua device handler we can evaluate the TPGS setting from the existing inquiry data of the sdev and save us the I/O. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support ↵Chandra Seetharaman
partitions in storage rdac hardware handler assumes that there is one-to-one relation ship between the host and the controller w.r.t lun. IOW, it does not support "multiple storage partitions" within a storage. Example: HBA1 and HBA2 see lun 0 and 1 in storage A (1) HBA3 and HBA4 see lun 0 and 1 in storage A (2) HBA5 and HBA6 see lun 0 and 1 in storage A (3) luns 0 and 1 in (1), (2) and (3) are totally different. But, rdac handler treats the lun 0s (and lun 1s) as the same when sending a mode select to the controller, which is wrong. This patch makes the rdac hardware handler associate HBA and the storage w.r.t lun (and not the host itself). Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page ↵Chandra Seetharaman
to identify storage rdac hardware handler uses "Subsystem Identifier" from C4 inquiry page to uniquely identify a storage. The problem with that is that if any any of the bytes are non-ascii, subsys_id will all be spaces (hex 0x20). This creates lot of problems especially when there are multiple rdac storages are connected to the server. Use "Storage Array Unique Identifier" from C8 inquiry page, which is the world wide unique identifier for the storage array, to uniquely identify the storage. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-21treewide: fix potentially dangerous trailing ';' in #defined values/expressionsPhil Carmody
All these are instances of #define NAME value; or #define NAME(params_opt) value; These of course fail to build when used in contexts like if(foo $OP NAME) while(bar $OP NAME) and may silently generate the wrong code in contexts such as foo = NAME + 1; /* foo = value; + 1; */ bar = NAME - 1; /* bar = value; - 1; */ baz = NAME & quux; /* baz = value; & quux; */ Reported on comp.lang.c, Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com> Initial analysis of the dangers provided by Keith Thompson in that thread. There are many more instances of more complicated macros having unnecessary trailing semicolons, but this pile seems to be all of the cases of simple values suffering from the problem. (Thus things that are likely to be found in one of the contexts above, more complicated ones aren't.) Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (110 commits) [SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature. [SCSI] qla2xxx: Unify the read/write sfp mailbox command routines. [SCSI] qla2xxx: Clear complete initialization control block. [SCSI] qla2xxx: Allow an override of the registered maximum LUN. [SCSI] qla2xxx: Add host number in reset and quiescent message logs. [SCSI] qla2xxx: Correctly read sfp single byte mailbox register. [SCSI] qla2xxx: Add qla82xx_rom_unlock() function. [SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash. [SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function [SCSI] qla2xxx: Correct buffer start in edc sysfs debug print. [SCSI] qla2xxx: Update firmware version after flash update for ISP82xx. [SCSI] qla2xxx: Fix hang during driver unload when vport is active. [SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6. [SCSI] qla2xxx: Fix virtual port failing to login after chip reset. [SCSI] qla2xxx: Fix vport delete hang when logins are outstanding. [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr) [SCSI] ipr: Rate limit DMA mapping errors [SCSI] hpsa: add P2000 to list of shared SAS devices [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work. [SCSI] hpsa: remove superfluous sleeps around reset code ...
2011-05-01[SCSI] scsi_dh_alua: Attach to UNAVAILABLE/OFFLINE AAS devicesMartin George
The SCSI ALUA handler currently fails to attach to devices reporting an UNAVAILABLE/OFFLINE AAS. But given that an UNAVAILABLE/OFFLINE AAS can transition to other states like ACTIVE/OPTIMIZED, ACTIVE/NON-OPTIMIZED, etc. as per SPC4, this ALUA handler behavior should be rectified so as to attach to devices which also report an UNAVAILABLE/OFFLINE AAS. Signed-off-by: Martin George <marting@netapp.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] scsi_dh_rdac : decide whether to send mode select based on operating modeMoger, Babu
Based on the operating modes, handler decides whether to send mode select or not. Purpose here is to reduce io-shipping as much as possible whenever there is an option. Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Yanling Qi <yanling.qi@lsi.com> Reviewed-by: Sudhir Dachepalli <Sudhir.Dachepalli@lis.com> Reviewed-by: Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Reviewed-by: Bob Stankey <Robert.Stankey@lsi.com> Reviewed-by: Vijay Chauhan <Vijay.Chauhan@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] scsi_dh_rdac : Detect the different RDAC operating modesMoger, Babu
This patch detects different operating RDAC modes during the discovery. It also collects the information about the preferred path. Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Yanling Qi <yanling.qi@lsi.com> Reviewed-by: Sudhir Dachepalli <Sudhir.Dachepalli@lis.com> Reviewed-by: Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Reviewed-by: Bob Stankey <Robert.Stankey@lsi.com> Reviewed-by: Vijay Chauhan <Vijay.Chauhan@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] scsi_dh_rdac : Add definitions for different RDAC operating modesMoger, Babu
This patch adds definitions to support for different operating modes for LSI rdac storage. Currently, rdac support 3 operation modes. 1. RDAC mode(legacy) 2. AVT mode 3. IOSHIP mode These definitions are used while activating the path(rdac_activate). Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Yanling Qi <yanling.qi@lsi.com> Reviewed-by: Sudhir Dachepalli <Sudhir.Dachepalli@lis.com> Reviewed-by: Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Reviewed-by: Bob Stankey <Robert.Stankey@lsi.com> Reviewed-by: Vijay Chauhan <Vijay.Chauhan@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24[SCSI] scsi_dh: fix reference counting in scsi_dh_activate error pathMike Snitzer
Commit db422318cbca55168cf965f655471dbf8be82433 ([SCSI] scsi_dh: propagate SCSI device deletion) introduced a regression where the device reference is not dropped prior to scsi_dh_activate's early return from the error path. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org # 2.6.38 Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-14[SCSI] scsi_dh_rdac: Add MD36xxf into device listYanqing_Liu@Dell.com
This patch is to add Dell MD36xxf array into the RDAC handler device list. Singed-off-by: Yanqing Liu <Yanqing_Liu@Dell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] scsi_dh_rdac : Adding MODULE VERSION for rdac device handlerMoger, Babu
Adding MODULE_VERSION for scsi_dh_rdac. This will be helpful sometimes to get the code level without looking at the code. Signed-off-by: Babu Moger <babu.moger@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] scsi_dh: cosmetic change to sizeof()Hillf Danton
instead of doing sizeof(struct X) it's better to do sizeof(*v) where v is the variable pointing to struct X. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Babu Moger <babu.moger@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] scsi_dh_rdac: fix for lun_table update for rdac device handlerMoger, Babu
During one of our testing, we noticed that mode select command sent from the host did not have the lun_table updated. Problem is root caused to the way lun table is updated. Lun table update was done after the call to blk_rq_map_kern is made. This was causing problem because kernel uses bounce buffer(bio_copy_kern) if the address is not aligned. The command buffer updated after the call(blk_rq_map_kern) was not going on the wire. Moved the code to update the lun_table before the call to fix the problem. Signed-off-by: Babu Moger <babu.moger@lsi.com> Signed-off-by: Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Signed-off-by: Yanling Qi <Yanling.Qi@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] scsi_dh_hp_sw: fix deadlock in start_stop_endioMike Snitzer
The use of blk_execute_rq_nowait() implies __blk_put_request() is needed in start_stop_endio() rather than blk_put_request() -- blk_finish_request() is called with queue lock already held. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] scsi_dh: Use scsi_devinfo functions to do matching of device_handler ↵Peter Jones
tables. Previously we were using strncmp in order to avoid having to include whitespace in the devlist, but this means "HSV1000" matches a device list entry that says "HSV100", which is wrong. This patch changes scsi_dh.c to use scsi_devinfo's matching functions instead, since they handle these cases correctly. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] scsi_dh_alua: add scalable ONTAP lun to dev listMike Snitzer
Currently NetApp's VID/PID details in the INQUIRY response shows up as 'NETAPP' and 'LUN'. With upcoming scalable SAN ONTAP version on NetApp controllers, the PID entry alone is being modified to 'LUN C-Mode' (to distinguish current ONTAP LUNs from scalable ONTAP LUNs). 'LUN' would still suffice for matching 'LUN C-Mode' but best to explicitly add these new NetApp LUNs to the device list. Reported-by: Martin George <marting@netapp.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>