summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hpsa.c
AgeCommit message (Collapse)Author
2010-03-03[SCSI] hpsa: Increase the number of scatter gather elements supported.Stephen M. Cameron
This uses the scatter-gather chaining feature of Smart Array controllers. 32 scatter-gather elements are embedded in the "command list", and the last element in the list may be marked as a "chain pointer", and point to an additional block of scatter gather elements. The precise number of scatter gather elements supported is dependent on the particular kind of Smart Array, and is determined at runtime by querying the hardware. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: mark hpsa_pci_init as __devinitStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: remove scan threadMike Miller
The intent of the scan thread was to allow a UNIT ATTENTION/LUN DATA CHANGED condition encountered in the interrupt handler to trigger a rescan of devices, which can't be done in interrupt context. However, we weren't able to get this to work, due to multiple such UNIT ATTENTION conditions arriving during the rescan, during updating of the SCSI mid layer, etc. There's no way to tell the devices, "stand still while I scan you!" Since it doesn't work, there's no point in having the thread, as the rescan triggered via ioctl or sysfs can be done without such a thread. Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: return -ENOMEM, not -1Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: fix scsi status mis-shiftStephen M. Cameron
The SCSI status does not need to be shifted. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: fix firmwart typoStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] hpsa: allow modifying device queue depth.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: update driver version to 2.0.1-3Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Reorder compat ioctl functions to eliminate some forward ↵Stephen M. Cameron
declarations. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: eliminate lock_kernel in compat_ioctlStephen M. Cameron
The use of the big kernel lock here appears to be ancient cruft that is no longer needed. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: fix bug in adjust_hpsa_scsi_tableStephen M. Cameron
fix bug in adjust_hpsa_scsi_table which caused devices which have changed size, etc. to do the wrong thing. The problem was as follows: The driver maintains its current idea of what devices are present in the h->dev[] array. When it updates this array, it scans the hardware, and produces a new list of devices, call it sd[], for scsi devices. Then, it compares each item in h->dev[] vs. sd[], and any items which are not present sd it removes from h->dev[], and any items present in sd[], but different, it modifies in h->dev[]. Then, it looks for items in sd[] which are not present in h->dev[], and adds those items into h->dev[]. All the while, it keeps track of what items were added and removed to/from h->dev[]. Finally, it updates the SCSI mid-layer by removing and adding the same devices it removed and added to/from h->dev[]. (modified devices count as a remove then add.) originally, when a "changed" device was discovered, it was removed then added to h->dev[]. The item was added to the *end* of h->dev[]. And, the item was removed from sd[] as well (nulled out). As it processed h->dev[], these newly added items at the end of the list were encountered, and sd[] was searched, but those items were nulled out. So they ended up getting removed immediately after they were added. The solution is to have a way to replace items in the h->dev[] array instead of doing a remove + add. Then the "changed" items. are not encountered a second time, and removed. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Fix hpsa_find_scsi_entry so that it doesn't try to dereference ↵Stephen M. Cameron
NULL pointers Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: clarify obscure comment in adjust_hpsa_scsi_tableStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: print all the bytes of the CDB, not just the first one.Mike Miller
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: when resetting devices, print out which deviceStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use scan_start and scan_finished entry points for scanningStephen M. Cameron
use scan_start and scan_finished entry points for scanning and route the CCISS_REGNEWD ioctl and sysfs triggering of same functionality through hpsa_scan_start. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Add an shost_to_hba helper function.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Don't return DID_NO_CONNECT when a device is merely not readyMatt Gates
Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Retry commands completing with a sense key of ABORTED_COMMANDMatt Gates
Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Return DID_RESET for commands which complete with status of ↵Matt Gates
UNSOLICITED ABORT The commands should be retried, and this will make that happen, instead of resulting in an i/o error. Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Fix p1210m LUN assignment.Stephen M. Cameron
The p1210m responsds to SCSI report LUNs, unlike traditional Smart Array controllers. This means that the bus, target, and lun assignments done by the driver cannot be arbitrary, but must match what SCSI REPORT LUNS returns. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: add pci ids for storageworks 1210m, remove p400, p800, p700mMike Miller
and update pci_ids.h to include new PCI ID for StorageWorks 1210m variant. Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Allow multiple command completions per interrupt.Don Brace
This is done by adding support for the so-called "performant mode" (that's really what they called it). Smart Array controllers have a mode which enables multiple command completions to be delivered with a single interrupt, "performant" mode. We want to use that mode, as some newer controllers will be requiring this mode. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: interrupt pending function should return bool not unsigned longStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: make tag macros into functionsStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: eliminate unnecessary memcpysStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: remove unwanted debug codeStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use kzalloc not kmalloc plus memsetStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use sizeof() not an inline constant in memset.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: return proper error codes not minus one.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: remove superfluous returns from void functions.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: make adjust_hpsa_scsi_table return void.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Use BUG_ON instead of an if statement.Stephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: avoid unwanted promotion from unsigned to signed for raid level ↵Stephen M. Cameron
index Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Use kernel integer types, not userland onesStephen M. Cameron
That is, use u64, u32, u16 and u8 rather than __u64, __u32, __u16 and __u8. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10[SCSI] hpsa: add driver for HP Smart Array controllers.Stephen M. Cameron
This driver supports a subset of HP Smart Array Controllers. It is a SCSI alternative to the cciss driver. [akpm@linux-foundation.org: avoid helpful cleanup patches] [achiang@hp.com: make device attrs static] [akpm@linux-foundation.org: msleep() does set_current_state() itself] Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>