| Age | Commit message (Collapse) | Author |
|---|
|
In the situation where a termination of an I/O times-out,
make sure that the linkage from the request to the task
is severed completely. Also make sure that the selection
of tasks to terminate occurs under scic_lock.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When resetting a sata device in the domain we have seen occasions where
libsas prematurely marks a device gone in the time it takes for the
device to re-establish the link. This plays badly with software raid
arrays. Other libsas drivers have non-uniform delays in their reset
handlers to try to cover this condition, but not sufficient to close the
hole. Given that a sata device can take many seconds to recover we
filter bcns and poll for the device reattach state before notifying
libsas that the port needs the domain to be rediscovered. Once this has
been proven out at the lldd level we can think about uplevelling this
feature to a common implementation in libsas.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
[ use kzalloc instead of kmem_cache ]
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[ use eventq and time macros ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Delay after bringing up the RNC to allow for resumption latency.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Newer gcc's are better at identifying "set, but not used" variables.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Delete code which is no longer used.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Replace the timeout_timer in the isci_tmf with a call to
wait_for_completion_timeout
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
* Consolidate tiny header files
* Move files out of core/ (drop core/scic_sds_ prefix)
* Merge core/scic_sds_request.[ch] into request.[ch]
* Cleanup request.c namespace (clean forward declarations and global
namespace pollution)
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that the data structures are unified unify the implementation in
host.[ch] and cleanup namespace pollution.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cross driver constants are spread out over multiple header files, consolidate
them into isci.h, and push some includes out to the source files that need
them.
TODO: remove SCI_MODE_SIZE infrastructure.
TODO: task.h is full of inlines that are too large
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Make scic_sds_request a proper member of isci_request. Also let's us
get rid of the dma pool object size tracking since we now know that all
requests are sizeof(isci_request). While cleaning up the construct
routine incidentally replaced SCI_FIELD_OFFSET with offsetof.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Final elimination of the anonymous data at the end of the request
structure.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Towards unifying request objects we need all members to be defined in the
object and not carved out of anonymous buffer space.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for unifying allocation of all request information make stp
data available in all requests. Incidentally collapse indentation.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Make it explicit that isci_host and scic_sds_controller are one in the same
object.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
[removed ->ihost back pointer]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This is a requirement for 2.6.39's new libata eh.
Still some questions about lldd_dev_gone racing against dev->lldd_dev
lookups, but we are at least no more broken than mvsas in this regard.
We also short-circuit I_T_nexus_reset invocations from the device
discovery path (IDEV_EH similar to MVS_DEV_EH) to filter out the
resulting domain rediscoveries triggered by the reset.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Converting to Linux native format. However the isci driver does a lot of
the calculation based on the max size of this data structure and the
Linux data structure only has a pointer to the response data. Thus the
sizeof(struct ssp_response_iu) will be incorrect and we need to define
the max size.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fixup of SSP command IU and SSP task IU to something that looks like Linux
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Converting of sata_fis_reg_d2h to dev_to_host_fis
Converting of sata_fis_reg_h2d to host_to_dev_fis
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The 'struct sci_base_object' was removed from the struct
scic_sds_request and was replaced by a pointer to
struct isci_request.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We are logging excessive output when hot unplug from expander. Moving
that to debug.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This is step 1 of removing the contortions to:
1/ unparse expander phy data into a smp discover frame
2/ open-code-parse the smp discover fram into a domain_device.dev_type equivalent
libsas has already spent cycles determining the dev_type, so now that
scic_sds_remote_device is unified with isci_remote_device we can
directly reference dev_type.
This might also change multi-level expander detection as we previously only
looked at dev_type == EDGE_DEV and we did not consider the FANOUT_DEV case.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that the core/lldd remote_device data structures are nominally unified
merge the corresponding sources into the top-level directory. Also move the
remote_node_context infrastructure which has no analog at the lldd level.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Make it explicit that isci_remote_device and scic_sds_remote_device are
one in the same object.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Removes unnecessary usage of BUG_ON macro, excluding core directory.
In some cases macro is unnecesary, check is done in caller function.
In other cases macro is replaced by if construction with
appropriate warning.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[changed some survivable bug conditions to WARN_ONCE]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Clean warnings and errors reported by sparse tool.
request.c:430:50: warning: mixing different enum types
remote_device.c:534:39: warning: symbol 'flags' shadows an earlier one
task.c:495:44: warning: mixing different enum types
scic_sds_controller.c:2155:24: warning: mixing different enum types
scic_sds_controller.c:2272:36: warning: mixing different enum types
scic_sds_controller.c:2911:38: warning: incorrect type in initializer (different address spaces)
scic_sds_controller.c:2913:25: warning: incorrect type in argument 2 (different address spaces)
scic_sds_request.c:875:34: warning: cast removes address space of expression
scic_sds_request.c:876:123: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:585:51: warning: incorrect type in assignment (different address spaces)
scic_sds_port.c:712:9: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:1770:25: warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Bartosz Barcinski <Bartosz.Barcinski@intel.com>
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[fixed up some false positives and misconversions]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Remove the state handler indirections for the scic_controller, and replace
them with procedural calls that check for the correct state first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A domain_device can always reference back to ->lldd_ha unlike local lldd
structures. Fix up cases where the driver uses local objects to look up the
isci_host. This also changes the calling conventions of some routines to
expect a valid isci_host parameter rather than re-lookup the pointer on entry.
Incidentally cleans up some macros that are longer to type than the open-coded
equivalent:
isci_host_from_sas_ha
isci_dev_from_domain_dev
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In the case of internal discovery related STP/SATA I/O started
through sas_execute_task the host lock is not taken by libsas before
calling lldd_execute_task, so the lock should not be managed before
calling back to libsas through task->task_done or sas_task_abort.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When a TMF times-out, the request is set back to "aborting".
Requests in the "aborting" state must be terminated when
LUN and device resets occur.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
* mark needlessly global routines static
* delete unused functions
* move kernel-doc blocks from header files to source
* reorder some functions to delete declarations
* more default handler cleanups phy
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A domain_device has the same lifetime as its related scsi_target. The
scsi_target is reference counted based on outstanding commands,
therefore it is safe to assume that if we have a valid sas_task that the
->dev pointer is also valid.
The asd_sas_port of a domain_device has the same lifetime as the driver
so it can also never be NULL as long as the sas_task is valid and the
driver is loaded.
This also cleans up isci_task_complete_for_upper_layer(), renames it to
isci_task_refuse() and notices that the isci_completion_selection
parameter was set to isci_perform_normal_io_completion by all callers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since libsas takes the domain device sata_dev.ap->lock before submitting
a task, error completions in the submit path for SATA devices must
unlock/relock when completing the sas_task back to libsas.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The request may be in the "aborted" or the "completed" state when
performing a task management operation on it.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In the case where a SAS or SATA LUN reset TMF is built a NULL pointer
dereference occurred because of the (unused) callback data pointer.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
|
|
Added a request "dead" state for use when a termination wait times-out.
isci_terminate_pending_requests now detaches the device's pending list
and terminates each entry on the detached list.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since the request structure contains a pointer to the completion to be
used if the request is being aborted or terminated, there is no reason
to pass the completion as a pointer to isci_terminate_request_core().
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Made sure the device ready check accounts for all states.
Moved the aborted task check into the loop of pulling task requests
off of the submitted list.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[remove host and device starting state checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The pointer to the core representation of a request is marked NULL at
completion, but we need to save the i/o tag for task management.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[revise changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Corrected use of the request state_lock in the completion callback.
In the case where an abort (or reset) thread is trying to terminate an
I/O request, it sets the request state to "aborting" (or "terminating")
if the state is still "starting". One of the bugs was to never set the
state to "completed". Another was to not correctly recognize the
situation where the I/O had completed but the sas_task was still pending
callback to task_done - this was typically a problem in the LUN and
device reset cases.
It is now possible that we leave isci_task_abort_task() with
request->io_request_completion pointing to localy allocated
aborted_io_completion struct. It may result in a system crash.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Maciej Trela <Maciej.Trela@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In the condition where outstanding I/Os are being cleaned from the device
requests in process list, the cleanup function needs to check that the
request is actually a sas-task and not a task management function.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The midlayer is already throttling i/o in the places where host_quiesce
was trying to prevent further i/o to the device. It's also problematic
in that it holds a lock over GFP_KERNEL allocations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
It belies the fact that isci_remote_device and scic_sds_remote_device
are one in same object with the same lifetime rules.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prepare the timer api for the arrival of dynamic creation and
destruction events from the core. It pretended to do this previously
but the core to date only used it in a static init-time only fashion.
This is an interim fix until a cleaner event queue can be developed.
1/ make all locking external to the api (add WARN_ONCE to verify)
2/ add a timer_destroy interface (to be used by the core)
3/ use del_timer_sync() prior to deallocating timer data
4/ delete the "timer_list" indirection, we only have timers allocated
for the isci_host
5/ fix detection of timer list allocation errors
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The lldd actively disallows requests in the "starting" state. Retrying
or holding off commands in this state is sub-optimal:
1/ it adds another state check to the fast path
2/ retrying can cause libsas to give up
However, isci's ->lldd_dev_found() routine already waits for controller
start to complete before allowing further progress. Checking the
"starting" state in isci_task_execute_task and the isr is redundant and
misleading. Clean this up and introduce a controller-wide event queue
to start reeling in "completion" proliferation in the driver.
The "stopping" state cleanups are in a similar vein, rely on the the isr
and other paths being precluded from occurring rather than implementing
state checking logic.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.
This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
