summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
AgeCommit message (Collapse)Author
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc ↵James Smart
vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handlingJames Smart
Added new sysfs attribute lpfc_max_scsicmpl_time. Attribute, when enabled, will control target queue depth based on I/O completion time. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disruptedJames Smart
Revert the target busy response in favor of the transport disrupted response for node state transitions. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : update driver version to 8.2.8James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Add MSI-X supportJames Smart
Add support for MSI-X Multi-Message interrupts. We use different vectors for fast-path interrupts (i/o) and slow-patch interrupts (discovery, etc). Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code ↵James Smart
DID_TRANSPORT_DISRUPTED [jejb: drop rejecting hunk altered by target busy patches] Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Add support for PCI-EEH permanent disablingJames Smart
Add support for PCI-EEH permanent-disabling a device via lpfc_pci_remove_one() Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Add new FCOE hardware supportJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Miscellaneous Bug FixesJames Smart
Miscellaneous Fixes: - Fix the wrong variable name used for checking node active usage status - Fix numerous duplicate log message numbers - Fix change KERN_WARNING messages to KERN_INFO. - Stop sending erroneous LOGO to fabric after vport is already terminated - Fix HBQ allocates that were kalloc'ing w/ GFP_KERNEL while holding a lock. - Fix gcc 4.3.2 compiler warnings and a sparse warning - Fix bugs in handling unsolicited ct event queue - Reorder some of the initial link up checks, to remove odd VPI states. - Correct poor VPI handling - Add debug messages - Expand Update_CFG mailbox definition - Fix handling of VPD data offsets - Reorder loopback flags - convert to use offsetof() Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Update driver for new SLI-3 featuresJames Smart
Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Miscellaneous Discovery FixesJames Smart
Miscellaneous Discovery fixes: - Fix rejection followed by acceptance in handling RPL and RPS unsolicited events - Fix for vport delete crash - Fix PLOGI vs ADISC race condition Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Add kernel-doc function headersJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate ↵Mike Christie
callbacks The fc class now calls scsi_target_unblock after calling the terminate callback, so this patch removes the calls from the drivers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc: use SCSI_MLQUEUE_TARGET_BUSY when catching the rport transition ↵Mike Christie
race We do want to call right back into the queuecommand during the race, so we can just use SCSI_MLQUEUE_TARGET_BUSY. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27[SCSI] replace __FUNCTION__ with __func__Harvey Harrison
[jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Update version to 8.2.7James Smart
Update lpfc driver version to 8.2.7 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Miscellaneous FixesJames Smart
Miscellaneous Fixes: - Fix bug in mbox sysfs interface that locked in EAGAIN if discovery stalled. - Fix missing error message when npiv and loop are true when link up occurs. - Fix panic in lpfc_scsi_cmd_iocb_cmpl: scsi_buf was NULL, but created race conditions with other code paths. - Fix error in sysfs mailbox structure that didn't rezero on next use. - Add missing mempool_free() to attachment failure path - Fix missing put of ndlp structure during driver unload. - Fix applications unable to send mailbox commands during discovery. - Remove unused argument (type) from function lpfc_post_buffer() API - Fix vport name is not shown after hbacmd vportcreate. - Remove repeated code statements. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Rework the worker threadJames Smart
Rework of the worker thread to make it more efficient. Make a finer-grain notfication of pending work so less time is spent checking conditions. Also made other general cleanups. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Discovery FixesJames Smart
- Fix ADISC timeout on initiators causing devloss timeout on targets - Correct FAN processing : port state vs unreg rpi's wasn't consistent - Correct mismatches between ASICs and PLOGI that would skip PLOGI Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Change device reset behaviorJames Smart
Prior handler was only waiting for I/O on one lun to finish before returning completion. Now, wait for all LUNs on the target. Also performed some rudimentary cleanup while in this code. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-22[SCSI] qla2xxx, lfpc: Rename 'state' attribute to 'link_state'Hannes Reinecke
lpfc and qla2xxx overwrite the standard 'state' attribute with custom callbacks. So rename the custom attributes to 'link_state' and retain the original meaning of the 'state' attribute. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10[SCSI] lpfc 8.2.6 : Update lpfc driver version to 8.2.6James Smart
Update lpfc driver version to 8.2.6 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Miscellaneous FixesJames Smart
Miscellaneous Fixes - Allow WRITE_VPARAM command when the virtual port is in a stopped state - Fixed handling of our queue depth max that was unconditionally raising the depth on all vports, rather than just the vport affected. - Fix race in interrupt handler for mailbox processing that did not take out the host lock. - Removed unused functions: find_node, findnode_rpi, and fabric_abort_flogi - Correct misspelled word unsolicited in message 0146 - Correct HW-error 5 handling - it should not reset the adapter - Correct handling of IOCBs, which did not null out our pCmd field before invoking the midlayer io done function. - Changed our maximum supported target id to 4096 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : PCI Parity and EEH handling fixesJames Smart
PCI Parity and EEH handling Fixes: - Under a PCI Data Parity Error, remove a completion routine callback that was on a command that we had already failed and released. - Under PCI parity error, we were not reinstalling the interrupt handler in the slot_reset callback, so we never became functional again. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Multiple discovery fixesJames Smart
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] lpfc: Balance lockingMatthew Wilcox
Commit 3163f725a5d071eea1830bbbfab78cfe3fc9baaf introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] lpfc: make lpfc_disable_node() staticAdrian Bunk
This patch makes the needlessly global lpfc_disable_node() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Update lpfc driver version to 8.2.5James Smart
Update lpfc driver version to 8.2.5 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Fix buffer leaksJames Smart
Fix buffer leaks: - HBQ dma buffer leak at dma_pool_destroy when unloading driver - Fix missing buffer free in slow ring buffer handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous discovery FixesJames Smart
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Add MSI-X single message supportJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous FixesJames Smart
Miscellaneous fixes: - Fix ERRATT flag which was overlapping - Allow RESTART mbx commands through when stopped. - Accept incoming PLOGI when connected to an N_Port. - Fix NPort to NPort pt2pt problems: ADISC and reg_vpi issues - Fix vport unloading error that erroneously cleaned up RSCN buffers - Fix memory leak during repeated unloads - in mbox handling - Fix link bounce vs FLOGI race conditions Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Correct ndlp referencing issuesJames Smart
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits) Jesper Juhl is the new trivial patches maintainer Documentation: mention email-clients.txt in SubmittingPatches fs/binfmt_elf.c: spello fix do_invalidatepage() comment typo fix Documentation/filesystems/porting fixes typo fixes in net/core/net_namespace.c typo fix in net/rfkill/rfkill.c typo fixes in net/sctp/sm_statefuns.c lib/: Spelling fixes kernel/: Spelling fixes include/scsi/: Spelling fixes include/linux/: Spelling fixes include/asm-m68knommu/: Spelling fixes include/asm-frv/: Spelling fixes fs/: Spelling fixes drivers/watchdog/: Spelling fixes drivers/video/: Spelling fixes drivers/ssb/: Spelling fixes drivers/serial/: Spelling fixes drivers/scsi/: Spelling fixes ...
2008-02-03drivers/scsi/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: David Somayajulu <david.somayajulu@qlogic.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-02pci: pci_enable_device_bars() fix for lpfc driverGreg Kroah-Hartman
Based on a patch from Ingo Molnar <mingo@elte.hu> as he pointed out that I wrongly missed this. Cc: Ingo Molnar <mingo@elte.hu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Remove users of pci_enable_device_bars()Benjamin Herrenschmidt
This patch converts users of pci_enable_device_bars() to the new pci_enable_device_{io,mem} interface. The new API fits nicely, except maybe for the QLA case where a bit of code re-organization might be a good idea but I prefer sticking to the simple patch as I don't have hardware to test on. I'll also need some feedback on the cs5520 change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30[SCSI] remove use_sg_chainingJames Bottomley
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Update lpfc driver version to 8.2.4James Smart
Update lpfc driver version to 8.2.4 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Rework misplaced reference taking on node structureJames Smart
Rework misplaced reference taking on node structure Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Enhance debugfs useJames Smart
Enhance debugfs to dump HBA SLIM as well as Host SLIM Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Fix Unsolicited Data itemsJames Smart
Fix Drivers Unsolicited CT command handling - we did not handle multiframe sequences well. Fix error due to delay in replenishing buffers for unsolicited data. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Add additional sysfs and module parametersJames Smart
Made link speed and link topology modifiable via sysfs Make scatter gather Segment Count into a module parameter. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Make lpfc legacy I/O port freeTomohiro Kusumi
This is a patch written by Tomohiro Kusumi and submitted to linux-scsi: http://marc.info/?l=linux-scsi&m=118673720712152&w=2 The original patch comment: This patch makes Emulex lpfc driver legacy I/O port free. It has already been acked quite long time ago. So I resubmit the patch. http://lkml.org/lkml/2006/11/22/28 Current lpfc driver is already using pci_select_bars() and pci_enable_device_bars() when the PCI bus has been reset. So I think this patch should also be acked. Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous FixesJames Smart
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Add parameters to enable and disable heartbeat and hba ↵James Smart
resets Add parameters to enable and disable heartbeat and hba resets Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Correct abort handler logicJames Smart
Correct Abort handler logic. It was unconditionally waiting a minimum of 2 seconds rather than looking for abort completion. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous Discovery/ELS FixesJames Smart
Miscellaneous Discovery/ELS Fixes: - Delay free's of ELS requests if adapter reject conditions - Fix concurrent PLOGI vs ADISC state handling - Add retry mechanism for GFF_ID - Correct some illegal state transitions around RSCN timeouts - Fix missing return in FAN handling Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 06:55:40 +0000