summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Expand)Author
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking imp...Tejun Heo
2010-02-19[SCSI] qla2xxx: Add firmware ETS burst support.Andrew Vasquez
2010-02-19[SCSI] qla2xxx: Correct loop-resync issues during SNS scans.Andrew Vasquez
2010-01-18[SCSI] qla2xxx: Add BSG support for FC ELS/CT passthrough and vendor commands.Giridhar Malavali
2010-01-17[SCSI] qla2xxx: Correct FCP2 recovery handling.Andrew Vasquez
2009-12-30[SCSI] qla2xxx: Extend base EEH support in qla2xxx.Andrew Vasquez
2009-12-30[SCSI] qla2xxx: Get the link data rate explicitly during device resync.Michael Hernandez
2009-12-10[SCSI] qla2xxx: fix for multiqueue in MISX disabled caseAnirban Chakraborty
2009-12-04[SCSI] qla2xxx: Properly re-register FC4/FDMI after physical and logical link...Andrew Vasquez
2009-12-04[SCSI] qla2xxx: Retrieve firmware's maximum number of supported FCFs.Andrew Vasquez
2009-12-04[SCSI] qla2xxx: Reread firmware versions information after an ISP abort.Lalit Chandivade
2009-09-12[SCSI] qla2xxx: Properly delete rports attached to a vport.Andrew Vasquez
2009-09-12[SCSI] qla2xxx: Correct various NPIV issues.Andrew Vasquez
2009-09-12[SCSI] qla2xxx: Further limit device-table (qla_devtbl) lookup to non-24xx.Andrew Vasquez
2009-09-12[SCSI] qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.Santosh Vernekar
2009-09-05[SCSI] qla2xxx: Add asynchronous-login support.Andrew Vasquez
2009-08-22[SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue...Anirban Chakraborty
2009-06-21qla2xxx: Correct iiDMA-update calling conventions.Harish Zunjarrao
2009-06-08[SCSI] qla2xxx: Synchronize MPI settings after a PE Reset.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Export additional firmware-states for application support.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Avoid redundant RISC reset during (re)-initialization.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Fallback enode-mac should not be a multicast address.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Add 10Gb iiDMA support.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Mark a port's state as needing-rediscovery during link disrup...Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Check status of qla2x00_get_fw_version() call.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Fallback to 'golden-firmware' operation on supported ISPs.Andrew Vasquez
2009-06-08[SCSI] qla2xxx: Correct logic-bug in set-model-info().Andrew Vasquez
2009-05-20[SCSI] qla2xxx: Use port number to compute nvram/vpd parameter offsets.Anirban Chakraborty
2009-05-20[SCSI] qla2xxx: Add an override option to specify ISP firmware load semantics.Andrew Vasquez
2009-05-20[SCSI] qla2xxx: Don't try to 'stop' firmware if already in ROM code.Andrew Vasquez
2009-05-20[SCSI] qla2xxx: Restrict model-name/description device-table usage.Andrew Vasquez
2009-05-20[SCSI] qla2xxx: Remove reference to request queue from scsi request block.Anirban Chakraborty
2009-05-20[SCSI] qla2xxx: Add QoS support.Anirban Chakraborty
2009-05-20[SCSI] qla2xxx: Correct compilation failures when DEBUG'n' options are enabled.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Explicitly set the execution-throttle with recent ISPs.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Reduce request queue-size overhead with recent ISPs.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Always use an FLT's NVRAM/VPD region information.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Cleanup unused flags and #defines.Shyam Sundar
2009-04-03[SCSI] qla2xxx: Correct ISP abort semantics for NVRAM, VPD, and flash update.Lalit Chandivade
2009-04-03[SCSI] qla2xxx: Add Flash-Access-Control support for recent ISPs.Joe Carnuccio
2009-04-03[SCSI] qla2xxx: Update MPI/PHY version retrieval codes.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Pass in optional extended-initialization control block.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Always (re)read firmware version/capabilities information.Andrew Vasquez
2009-04-03[SCSI] qla2xxx: Correct over-allocation of firmware-dump buffer.Giridhar Malavali
2009-03-10[SCSI] qla2xxx: Correct truncation in return-code status checking.Andrew Vasquez
2009-03-10[SCSI] qla2xxx: Correct vport delete bug.Anirban Chakraborty
2009-03-10[SCSI] qla2xxx: Use correct value for max vport in LOOP topology.Lalit Chandivade
2009-02-10[SCSI] qla2xxx: Remove interrupt request bit check in the response processing...Anirban Chakraborty
2009-01-25[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.Andrew Vasquez
2009-01-25[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TY...Andrew Vasquez