summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2010-12-23[SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command ↵Andrew Vasquez
fails on CNAs. The semantics we employ now in the driver, performing a BIG_HAMMER in the event of Get-ID (0x20) mailbox command failing, should only be done for FC. On FC configurations, it makes sense since advertising is only really performed once, so a BIG_HAMMER to reinitiate the process is needed to restart. Under FCoE, this is not needed, as there's a continous stream of advertisements/ACks at the protocol layer to initiate a relogin/reinitialization process. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Remove redundant module parameter permission bitsJoe Carnuccio
For driver module parameters that have permission bits set to (S_IRUGO|S_IRUSR), remove the second term since it is already included in the first term. S_IRUGO comes defined as (S_IRUSR|S_IRGRP|S_IROTH). Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Add sysfs node for displaying board temperature.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Fix for memory wedge on fw halt for ISP82XXMadhuranath Iyengar
Signed-off-by: Swapnil Nagle <swapnil.nagle@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Update FCP priority information to firmware before sending IOsMadhuranath Iyengar
The FCP priority info was not being updated properly in certain situations. Here are the changes that needs to be done to take care of this issue: 1. No need to check fcport->state for FCS_UNCONFIGURED in qla24xx_update_fcport_fcp_prio(), since an invalid loop id check is already performed which is sufficient. 2. Add the missing qla24xx_update_fcport_fcp_prio() function call within qla2x00_update_fcport() function, so that the priority info is updated on every port addition or change. 3. Perform proper adapter types checking. 4. Other changes, associated with DEBUG/printk's and parameter passing. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Fixed zero test on new_config in qla2x00_process_loopback().Joe Carnuccio
Fixed the incorrect zero test on array new_config[]. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Populate FCP_PRIO location for no *FLT* caseAndrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: list cursors are not nullDan Carpenter
This is just a cleanup. The unneeded NULL check annoys static checkers because we already derefenced it and the we check it and then (if it's not the _safe() version) we dereference it again without checking. And the static checker is all, "Wah? Is it null or not?" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-23[SCSI] qla2xxx: Added support for quiescence mode for ISP82xx.Saurav Kashyap
Support is added for quiescence mode. This feature is for P3P adapters. Any of the functions can put the firmware into quiescence state. All the others have to ack that request. During quiescence mode current commands are processed and all the new incoming I/Os are blocked. Loop resync is performed after firmware comes out of quiescence state. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09[SCSI] qla2xxx: Update version number to 8.03.05-k0.Madhuranath Iyengar
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09[SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function.Saurav Kashyap
A return value is not set for the successful case and it has a garbage value. This fix will set the default value to SUCCESS and in case of any failures it is changed. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09[SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated ↵Andrew Vasquez
for 82xx parts. This would cause a panic while reading the NPIV-config data. Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09[SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq ↵Mike Hernandez
parameter. IRQF_SHARED flag should not be set when calling request_irq for MSI since this interrupt mechanism cannot be shared like standard INTx. Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09[SCSI] qla2xxx: Populate Command Type 6 LUN field properly.Mike Hernandez
Use the host_to_fcp_swap call to correctly populate the LUN field in the Command Type 6 path. This field is used during LUN reset cleanup and must match the field used in the FCP command. Cc: stable@kernel.org Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25[SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Correct PRLI failure response code handling.Andrew Vasquez
This patch fixes an issue which causes the firmware to fail with a 'PRLI failed' status code (iop1 = 405). This status triggers the driver to fall into an incorrect code-path which does not attempt a login retry. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Drop srb reference before waiting for completion.Mike Christie
This patch fixes a regression introduced by commit 083a469db4ecf3b286a96b5b722c37fc1affe0be qla2xxx_eh_wait_on_command() is waiting for an srb to complete, which will never happen as the routine took a reference to the srb previously and will only drop it after this function. So every command abort will fail. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Addition of shutdown callback handler.Madhuranath Iyengar
This patch adds a shutdown handler to qla2xxx driver to make sure that all DMA and firmware activities are stopped, and any associated driver resources are released. The need for this handler arose when executing kexec in specific environments caused the data of the 2nd kernel to be corrupted, due to DMA activities. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Initialize the vport_slock spinlock.Andrew Vasquez
Commit feafb7b1714cf599a6d0fed45801ab3f66046cbd neglected to initialize the spinlock. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Remove scsi_cmnd->serial_number from debug tracesMadhuranath Iyengar
This patch cleans up any printk or debug tracing of the the serial_number field in the qla2xxx driver. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Add flash read/update support using BSG interfaceHarish Zunjarrao
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Group CS_RESET return status with other link level event ↵Chad Dupuis
statuses. Currently when we receive a CS_RESET as a response for a SCSI command the driver will return DID_TRANSPORT_DISRUPTED back to the SCSI mid-layer. There are certain circumstances where this could cause the mid-layer to exhaust all of its retries if the FC port goes away for a short time. This will result in commands being prematurly failed. Moving the CS_RESET return code to be grouped with other link level events will cause the FC transport layer to block that target's queue thus preventing the premature exhaustion of retries. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Change del_timer_sync() to del_timer() in qla2x00_ctx_sp_free().Chad Dupuis
Using del_timer_sync() in the qla2x00_ctx_sp_free() function may cause a kernel panic as it is not interrupt context safe and qla2x00_ctx_sp_free() may be called from a softirq context. Changing the call from del_timer_sync() to del_timer() will make the function interrupt context safe. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Add module parameter to enable/disable GFF_ID device type check.Chad Dupuis
Add the module parameter ql2xgffidenable to disable/enable the use of the GFF_ID name server command to prevent non FCP SCSI devices from being added to the driver's internal fc_port database. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Remove port down retry count.Chad Dupuis
This patch removes the use of the port down retry counter as a mechanism to update a fcport state. The internal driver counter is a residual carry-over from pre-FC-transport aware driver inteaction. The ql2xport_down_retry module parameter and NVRAM set ha->port_down_retry_count remain in order to seed the fc-host's default dev-loss-tmo. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: locking problem in qla2x00_init_rings()Dan Carpenter
IRQs are already disabled here so we don't need to disable them again. But more importantly, the spin_lock_irqsave() overwrites "flags" and that breaks things when we want to re-enable the IRQs when we call spin_unlock_irqrestore(&ha->hardware_lock, flags); Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-07[SCSI] qla2xxx: prep for fc host dev loss tmo supportMike Christie
This removes the driver's get_host_def_dev_loss_tmo callback and just has the driver set the dev loss using the fc class fc_host_dev_loss_tmo macro like is done for other fc params. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16[SCSI] qla2xxx: ROM lock recovery if fw hangs while holding the lock.Shyam Sundar
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: AER Support-Return recovered from mmio_enable function for 82XX.Saurav Kashyap
Return recovered from pci_mmio_enabled function if it is 82XX. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Increase SG table size to support large IO size per scsi ↵Giridhar Malavali
command. The sg table size is increased from 128 to 1024 to support multiple sg lists and number of sg elements per scsi command. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Clear local references of rport on device loss timeout ↵Giridhar Malavali
notification from FC transport. The clearing of local references to rport was blocked when abort is active. This code clears the local references unconditionaly upon device loss timeout callback from FC transport. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Handle MPI timeout indicated by AE8002Madhuranath Iyengar
In case the MPI times out, the FW issues an async event AE8002 to indicate this to every FCoE function. The FC/FCoE driver is required to handle this, by doing a soft reset and issuing a Write MPI register mailbox command to reset the MPI. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Update to AER support, do early abort commands.Lalit Chandivade
Currently the IOs are returned back in slot reset, this could be late and can cause error handler to invoke. If error handler invokes, eh_abort fails and escalate to device/bus/host resets causing issues. The commands need to be returned back to upper layer in io_error_detected. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Cleanup some dead-code and make some functions static.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Return proper fabric name based on device state.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Added AER support for ISP82xx.Lalit Chandivade
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Pass first 64 bytes of MBX information when vendor commands ↵Giridhar Malavali
fail. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Don't issue set or get port param MBC if port is not online.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Update version number to 8.03.04-k0.Madhuranath Iyengar
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Check for empty slot in request queue before posting Command ↵Giridhar Malavali
type 6 request. For ISP82xx, the check for empty slot in request queue before posting command type 6 request was missing. This could lead to request queue entry corruptions causing IO timeouts. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Cover UNDERRUN case where SCSI status is set.Lalit Chandivade
Currently, if target sets the SCSI Status (with Check condition) and there is no FCP residual bit set then driver does not check for dropped frame. This could lead to data corruption. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05[SCSI] qla2xxx: Correctly set fw hung and complete only waiting mbx.Giridhar Malavali
The fw_hung flag should be set ir-respective of if there is a mbx command pending or not. Also the complete should be called if there is a mbx waiting. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>