summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2009-09-12[SCSI] qla2xxx: Update version number to 8.03.01-k6.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Properly delete rports attached to a vport.Andrew Vasquez
Original code would inadvertently skip the deferred fc_remote_port_delete() call for rports hanging off any vport. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct various NPIV issues.Andrew Vasquez
* Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.Lalit Chandivade
Original code would break-out of loop after only one iteration. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Further limit device-table (qla_devtbl) lookup to non-24xx.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.Santosh Vernekar
In fabric-login based on iop BIT_8 firmware notifies presence of a FCP2 device and not necessarily a TAPE device. So instead of setting FCF_TAPE_PRESENT flag there we set it using scsi_device->type after mid-layer scan recognises "type" of the device. It also adds a new flag FCF_FCP2_DEVICE for any future use. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] qla2xxx: Add asynchronous-login support.Andrew Vasquez
ISPs which support this feature include 23xx and above. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] qla2xxx: Generalize srb structure usage.Andrew Vasquez
Lay groundwork for adding alternative asynchronous operations by generalize and extending the SRB structure. This allows for follow-on patches to add support for: - Asynchronous logins. - ELS/CT passthru requests. - Loopback requests. - Non-blocking mailbox commands (ABTS, Task Management, etc). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Update version number to 8.03.01-k5Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if ↵Anirban Chakraborty
multiqueue fails When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Correct display of vp_count in debug printk.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Fix a bug that clears the interrupt status register for the ↵Anirban Chakraborty
base queue The interrupt handler clears the interrupt status register for response updates in the base queue while working in the multique mode. This could lead to missing interrupt for async events, mail box completions etc. as these are also handled in the base queue. The fix ensures that the interrupt bit is not cleared for response updates in the ISR when the driver is working in multiqueue mode. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: ISP21xx/22xx do not support FDMI registrations.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Pad IOCB structure for size requirements.Shyam Sundar
One byte added to make the IOCB structure satisfy size requirements. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Handle RSCN's per master/slave vn-port basis.Santosh Vernekar
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Process DPC requests within valid Fabric topologies.Lalit Chandivade
If vports are created and topology is changed to Loop only, the driver continuously gets a LIP reset occurred and keeps trying to enable the vport. Only manage requests during F_Port. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Mark all devices lost on loss of fc port.Santosh Vernekar
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Skip RSCN processing on vha if event is global.Santosh Vernekar
The RSCN processing is skipped if the event received is global and vha is not recipient. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Correctly handle 'global port-unavailable' AEN.Andrew Vasquez
Treat a global port-unavailable PORT_UPDATE (8014h) AEN as a loop-down event. For this case, within the FCoE domain, the 'logical' interface has been terminated, but the driver will not receive the classic LOOP_DOWN AEN. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Pass the command's data residual to upper-layer callers.Ravi Anand
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Fix __LITTLE_ENDIAN definition warningsDave Jones
On ppc64, gcc 4.4 spews lots of.. drivers/scsi/qla2xxx/qla_def.h:1485:7: warning: "__LITTLE_ENDIAN" is not defined Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21qla2xxx: Update version number to 8.03.01-k4.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct (again) overflow during dump-processing on large-memory ↵Andrew Vasquez
ISP23xx parts. Commit 7b867cf76fbcc8d77867cbec6f509f71dce8a98f ([SCSI] qla2xxx: Refactor qla data structures) inadvertently reverted e792121ec85672c1fa48f79d13986a3f4f56c590 ([SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ISP23xx parts.). Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Limit querying to supported mailbox-registers while reading FW state.Andrew Vasquez
Pre-ISP24xx chips have dedicated uses for mailbox 4 and 5 which software should typically not query nor update. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct iiDMA-update calling conventions.Harish Zunjarrao
* To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for other older ISPs bits 2-0 are used. * Pass proper VP index Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Fixed a bug in number of response queue creation logic.Anirban Chakraborty
Cc: stable@kernel.org Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-15[SCSI] qla2xxx: Resolve a performance issue in interruptAnirban Chakraborty
Reverted back a change in qla*_intr_handler code that caused an increase in cpu cycles by allowing interrupts to occur while the instance hardware lock was being held. Fix by taking the lock in irqsave mode. Reported-and-tested-by: Douglas W. Styner <douglas.w.styner@intel.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-15[SCSI] qla2xxx: fix printk format warningsRandy Dunlap
Fix qla2xxx printk format warnings: drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 6) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 6) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Update version number to 8.03.01-k3.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Synchronize MPI settings after a PE Reset.Andrew Vasquez
Ensure MPS remains in synchronization across all NIC/FCoE functions after a reset. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Export additional firmware-states for application support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Reduce lock-contention during do-work processing.Andrew Vasquez
Queued work processing will now be serialized with its own lower-priority spinlock. This also simplifies the work-queue interface for future work-queue consumers. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Avoid explicit LOGO during driver host tear-down.Andrew Vasquez
As firmware will ultimately terminate (stop) and port states-cleared. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Query supported RISC registers bits in determining a ↵Andrew Vasquez
paused-state. ISP24xx and above must query the host-status register, not HCCR. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Avoid redundant RISC reset during (re)-initialization.Andrew Vasquez
ISP24xx and above ISPs perform a RISC reset in qla24xx_reset_chip(), which is called prior to qla24xx_chip_diag(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Fallback enode-mac should not be a multicast address.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Add notification message when an NPIV fails to acquire a ↵Andrew Vasquez
port-id. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Add 10Gb iiDMA support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Mark a port's state as needing-rediscovery during link ↵Andrew Vasquez
disruptions. With RSCN states not being kept across qla2x00_configure_loop() invocations, loop-resync distruptions during fabric-discovery may cause ports to remain in a lost state. Force state renegotiation during a follow-on configure-loop iteration. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Check status of qla2x00_get_fw_version() call.Andrew Vasquez
Unlike earlier ISPs, recent ISPs (ISP81xx) can in fact fail this mailbox command. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Correct NULL pointer bug in cpu affinity mode.Anirban Chakraborty
This patch fixes a NULL pointer bug that occurs when IO is being carried out on a vport for which the cpu affinity mode is turned on. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Use 'proper' DID_* status code for dropped-frame scenarios.Andrew Vasquez
The SCSI-midlayer's fast-fail codes consider an DID_ERROR status as a driver-error and the failed I/O would then be retried in the midlayer without being fast-failed to dm-multipath. DID_BUS_BUSY status returns would induce unneeded path-failures events being propagated to the DM/MD. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Fallback to 'golden-firmware' operation on supported ISPs.Andrew Vasquez
In case the onboard firmware is unable to be read or loaded for operation, attempt to fallback to a limited-operational firmware image stored in a different flash region. This will allow a user to reflash and correct a board with proper operational firmware. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Correct queue-creation bug when driver loaded in QoS mode.Anirban Chakraborty
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Correct logic-bug in set-model-info().Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Export TLV data on supported ISPs.Andrew Vasquez
Firmware currently provides PB and PGF TLVs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Export XGMAC statistics on supported ISPs.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] qla2xxx: Export negotiated fabric-parameters for application support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20[SCSI] qla2xxx: Update version number to 8.03.01-k2.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 16:01:47 +0000