summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2008-12-12Commands needing to be retried require a complete re-initialization.Alan D. Brunelle
The test-unit-ready portion of this patch was causing boots to fail on my test machine (as in http://lkml.org/lkml/2008/12/5/161). With this patch in place, the system is booting reliably. Mike Anderson found the same problem in the hp_hw_start_stop code, and I applied the same solution in cdrom_read_cdda_bpc. Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-04[PATCH 1/2] kill FMODE_NDELAY_NOWChristoph Hellwig
Update FMODE_NDELAY before each ioctl call so that we can kill the magic FMODE_NDELAY_NOW. It would be even better to do this directly in setfl(), but for that we'd need to have FMODE_NDELAY for all files, not just block special files. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] stex: switch to block timeout [SCSI] make scsi_eh_try_stu use block timeout [SCSI] megaraid_sas: switch to block timeout [SCSI] ibmvscsi: switch to block timeout [SCSI] aacraid: switch to block timeout [SCSI] zfcp: prevent double decrement on host_busy while being busy [SCSI] zfcp: fix deadlock between wq triggered port scan and ERP [SCSI] zfcp: eliminate race between validation and locking [SCSI] zfcp: verify for correct rport state before scanning for SCSI devs [SCSI] zfcp: returning an ERR_PTR where a NULL value is expected [SCSI] zfcp: Fix opening of wka ports [SCSI] zfcp: fix remote port status check [SCSI] fc_transport: fix old bug on bitflag definitions [SCSI] Fix hang in starved list processing
2008-12-01[SCSI] stex: switch to block timeoutJames Bottomley
stex sets the timeout in its slave configure routine for all devices. This now needs to update the request queue timeout in block. Cc: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01[SCSI] make scsi_eh_try_stu use block timeoutJames Bottomley
scsi_eh_try_stu() was still using the timeout parameter in the device which is now not set (i.e. zero filled) meaning that it waited no time at all for the start unit command to complete (leading the routine to conclude failure every time). This lead to a 2.6.27 regression: http://bugzilla.kernel.org/show_bug.cgi?id=12120 Where firewire devices that were non spec compliant wouldn't spin up. Fix this by using the block queue timeout value instead. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01[SCSI] megaraid_sas: switch to block timeoutJames Bottomley
megaraid_sas sets the timeout in its slave configure routine for devices on special channels. This now needs to update the request queue timeout in block. Cc: "Yang, Bo" <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01[SCSI] ibmvscsi: switch to block timeoutJames Bottomley
ibmvscsi sets the timeout in its slave configure routine for disk devices. This now needs to update the request queue timeout in block. Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01[SCSI] aacraid: switch to block timeoutJames Bottomley
aacraid updates the timeout in its slave configure routine if it is too small. This now needs to update the request queue timeout in block. Cc: AACRAID list <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-30gdth section fixesAl Viro
PCI side of driver should be devinit, not init Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30advansys fix on ISA-less configsAl Viro
The code if (shost->dma_channel != NO_ISA_DMA) free_dma(shost->dma_channel); in there is triggerable only if we have CONFIG_ISA (we only set ->dma_channel to something other than NO_ISA_DMA under #ifdef CONFIG_ISA). OTOH, free_dma() is not guaranteed to be there in absense of CONFIG_ISA. IOW, driver runs into undefined symbols on PCI-but-not-ISA configs (e.g. on frv) and it's a false positive. Fix: put the entire if () under #ifdef CONFIG_ISA; behaviour doesn't change and dependency on free_dma() disappears for !CONFIG_ISA. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16[SCSI] Fix hang in starved list processingMike Christie
Close possible infinite loop with interrupts off when devices are added back to the starved list. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11898 Reported-by: <alex.shi@intel.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-15[SCSI] dpt_i2o: fix transferred data length for scsi_set_resid()Miquel van Smoorenburg
dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which should contain the length in bytes of the transferred data. This would be correct if reply was a u32 *. However it is a void * here, so we need to read the value at (reply+20) instead. The value at (reply+5) is usually 0xff0000, which is apparently 'large enough' and didn't cause any trouble until 2.6.27 where commit 427e59f09fdba387547106de7bab980b7fff77be Author: James Bottomley <James.Bottomley@HansenPartnership.com> Date: Sat Mar 8 18:24:17 2008 -0600 [SCSI] make use of the residue value caused this to become visible through e.g. iostat -x . Signed-off-by: Miquel van Smoorenburg <mikevs@xs4all.net> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] scsi_error regression: Fix idempotent command handlingMike Christie
Drivers want to be able to return DID_TRANSPORT_DISRUPTED and have it do the right thing for commands like tape and passthrouh as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED was skipping that check so it could have caused a problem with tape commands. This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] qla2xxx: Update version number to 8.02.01-k9.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails.Michael Reed
Mike Reed noted (https://bugzilla.novell.com/show_bug.cgi?id=421330) that the driver was incorrectly returning a SUCCESS status if the driver's request to the firmware to abort a command failed. By doing so, the mid-layer believed, incorrectly, that the command has completed and has been returned (ultimately clearing scsi_cmnd.request_buffer) yet the driver still has the command. What should correctly happen is a mid-layer escalation (device-reset, etc.) of recovery during which the driver will eventually return the outstanding commands to the mid-layer. Cc: Stable Tree <stable@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.Shyam Sundar
For 23XX ISPs, max_vports may return an invalid value. Do not honour it. Cc: Stable Tree <stable@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.Andrew Vasquez
http://bugzilla.kernel.org/show_bug.cgi?id=9422 Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] qla2xxx: Correct Atmel flash-part handling.Lalit Chandivade
Use correct block size (4K) for erase command 0x20 for Atmel Flash. Use dword addresses for determining sector boundary. Cc: Stable Tree <stable@kernel.org> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05[SCSI] megaraid: fix mega_internal_command oopsFUJITA Tomonori
scsi_cmnd->cmnd was changed from a static array to a pointer post 2.6.25. It breaks mega_internal_command(): static int mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) { ... scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); scmd = &adapter->int_scmd; memset(scmd, 0, sizeof(Scsi_Cmnd)); sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; mega_internal_command() uses scsi_cmnd allocated internally so scmd->cmnd is NULL here. This patch adds a static array for cdb to adapter_t and uses it here. This also uses scsi_allocate_command/scsi_free_command, the recommended way to allocate struct scsi_cmnd since the driver might use sense_buffer in struct scsi_cmnd. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Boaz Harrosh <bharrosh@panasas.com> Tested-by: Pascal Terjan <pterjan@gmail.com> Reported-by: Pascal Terjan <pterjan@gmail.com> Acked-by: "Yang, Bo" <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-01saner FASYNC handling on file closeAl Viro
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: fdomain_cs: Sort out modules with duplicate description pcmcia: Whine harder about use of EXCLUSIVE pcmcia: IRQ_TYPE_EXCLUSIVE is long obsoleted
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] sd: fix computation of the full size of the device [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact [SCSI] sun3x_esp: Convert && to || [SCSI] sd: remove command-size switching code [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] fix netlink kernel-doc [SCSI] sd: Fix handling of NO_SENSE check condition [SCSI] export busy state via q->lld_busy_fn() [SCSI] refactor sdev/starget/shost busy checking [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) [SCSI] ipr: use memory_read_from_buffer() [SCSI] aic79xx: fix shadowed variables [SCSI] aic79xx: fix shadowed variables, add statics [SCSI] aic7xxx: update *_shipped files [SCSI] aic7xxx: update .reg files [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser [SCSI] scsi_dh: Initialize path state to be passive when path is not owned ...
2008-10-23[SCSI] sd: fix computation of the full size of the deviceH. Peter Anvin
When computing the full size of the device, we need to cast sdkp->capacity before shifting, since in some configurations sector_t can be a 32-bit number. Also, change ffz(~x) to the more idiomatic ilog2(x). Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] sun3x_esp: Convert && to ||Julia Lawall
The pattern !E && !E->fld is nonsensical. The patch below updates this according to the assumption that && should be ||. But perhaps another solution was intended. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @disable and_comm@ expression E; identifier fld; @@ - !E && !E->fld + !E || !E->fld // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-By: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] sd: remove command-size switching codeAlan Stern
This patch (as1138) removes from sd.c some old code for switching from 10-byte commands to 6-byte commands. This code is redundant -- the switching for READ and WRITE is already handled in scsi_io_completion() and the switching for MODE SENSE is already handled in scsi_mode_sense(). (There is no comparable switch for MODE SELECT, but I doubt one is needed.) Furthermore the other handlers do a better job; they check for appropriate ASC and ASCQ values before blindly switching the size. The code in sd.c is known to cause problems with some devices by switching when it shouldn't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy APIFUJITA Tomonori
Since the commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 (sg: disable interrupts inside sg_copy_buffer), no need to disable interrupts before calling scsi_sg_copy_from_buffer. So we can simplify twa_scsiop_execute_scsi_complete() a bit, which disables interrupts just for scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy APIFUJITA Tomonori
Since the commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 (sg: disable interrupts inside sg_copy_buffer), no need to disable interrupts before calling scsi_sg_copy_from_buffer. So we can simplify tw_transfer_internal, which disables interrupts just for scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>\ Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] fix netlink kernel-docRandy Dunlap
Fix kernel-doc warning: the function short description must be on one line and the previous comment is not kernel-doc but it was confusing scripts/kernel-doc. Warning(lin2627-g3-kdocfixes//drivers/scsi/scsi_netlink.c:221): No description found for parameter 'skb' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] sd: Fix handling of NO_SENSE check conditionJamie Wellnitz
The current handling of NO_SENSE check condition is the same as RECOVERED_ERROR, and assumes that in both cases, the I/O was fully transferred. We have seen cases of arrays returning with NO_SENSE (no error), but the I/O was not completely transferred, thus residual set. Thus, rather than return good_bytes as the entire transfer, set good_bytes to 0, so that the midlayer then applies the residual in calculating the transfer, and for sd, will fail the I/O and fall into a retry path. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] export busy state via q->lld_busy_fn()Kiyoshi Ueda
This patch implements q->lld_busy_fn() for scsi mid layer to export its busy state for request stacking drivers. For efficiency, no lock is taken to check the busy state of shost/starget/sdev, since the returned value is not guaranteed and may be changed after request stacking drivers call the function, regardless of taking lock or not. When scsi can't dispatch I/Os anymore and needs to kill I/Os (e.g. !sdev), scsi needs to return 'not busy'. Otherwise, request stacking drivers may hold requests forever. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] refactor sdev/starget/shost busy checkingKiyoshi Ueda
This patch refactors the busy checking codes of scsi_device, Scsi_Host and scsi_target. There should be no functional change. This is a preparation for another patch which exports scsi's busy state to the block layer for request stacking drivers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resumethomas schorpp
Take the Diag/Activity-LED of the HBA out of diagnostic mode on PM resume after successful PM resume from standby and HBA restart, it remained always on before. If something fails before complete recovery, it should remain on, since it is a diagnostics LED, reason for the used higher layer for the clear. Signed-off-by: thomas.schorpp@gmail.com Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: user visible misuse wrong SI units (not disk size!)Alan Cox
MHZ not Mhz for SI unit pedants Closes bug #6422 Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] ipr: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: fix shadowed variablesHarvey Harrison
OK to just reuse the outer declaration as it is never used again. drivers/scsi/aic7xxx/aic79xx_pci.c:340:12: warning: symbol 'devconfig' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:299:12: originally declared here targpcistat is always assigned just before use, remove the inner declaration. drivers/scsi/aic7xxx/aic79xx_pci.c:486:9: warning: symbol 'targpcistat' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:429:9: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic79xx: fix shadowed variables, add staticsHarvey Harrison
Redeclared within different if/else blocks, safe to reuse the original from beginning of function. drivers/scsi/aic7xxx/aic79xx_core.c:2475:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2586:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2587:15: warning: symbol 'scb' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2393:13: originally declared here Use caminfo for the outer declaration, the redeclared version is iterating over all initiator/target pairs (devices) which. drivers/scsi/aic7xxx/aic79xx_core.c:8857:23: warning: symbol 'devinfo' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:8711:21: originally declared here Forward declaration was already marked static, make the definition match. drivers/scsi/aic7xxx/aic79xx_core.c:3693:1: warning: symbol 'ahd_devlimited_syncrate' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: update *_shipped filesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: update .reg filesDenys Vlasenko
Update .reg files, marking unused registers with dont_generate_debug_code. Comment explains how to use it. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parserDenys Vlasenko
aic7xxx still contains ~30kb of dead code if pretty printing of registers is requested. These patches deal with it. Size differences: text data bss dec hex filename DEBUG_ENABLE+PRETTY_PRINT: 234697 2362 1188 238247 3a2a7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 205092 2362 1188 208642 32f02 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+PRETTY_PRINT: 227272 2362 1172 230806 38596 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 197671 2362 1172 201205 311f5 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o DEBUG_ENABLE+NO_PRETTY_PRINT: 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+NO_PRETTY_PRINT: 185040 2362 1172 188574 2e09e linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 185040 2362 1172 188574 2e09e linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o This patch: Introduce "dont_generate_debug_code" keyword in aicasm parser. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] scsi_dh: Initialize path state to be passive when path is not ownedChandra Seetharaman
Set the path state to be passive when we learn that the controller does not own the path to the LUN. This will avoid sending even a single i/o thru the passive path at the probe time. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-23[SCSI] fix removable device inability to detect disk changesJames Bottomley
On Tue, 12 Aug 2008 15:08:14 +0200 Giuliano Pochini <pochini@shiny.it> wrote: > Fujitsu magneto-optical drive, Adaptec 29160 and > Linux Jay 2.6.26 #7 SMP Sun Aug 10 18:34:22 CEST 2008 ppc 7455, altivec supported PowerMac3,6 GNU/Linux > > When I insert a disk and I mount it, scsi_test_unit_ready() is called and > the do-while loop gets sshdr->sense_key == UNIT_ATTENTION in the first > cycle and 0 in the second one. So the if below misses the UNIT_ATTENTION > and sdev->changed = 1 is not executed. At this point bad things can > happen... I'm not sure how to fix this. Any clue ? The problem is essentially caused by us eating UNIT_ATTENTION conditions in scsi_test_unit_ready(). Fix by updating the ->changed flag when this happens if the media is removable. [pochini@shiny.it: updates to tidy up patch] Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-21[PATCH] switch srAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch sdAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch ide-scsiAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] don't mess with file in scsi_nonblockable_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch cdrom_{open,release,ioctl} to sane APIsAl Viro
... convert to it in callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] lose the unused file argument in generic_ide_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch scsi_cmd_ioctl() to passing fmode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch sg_scsi_ioctl() to passing fmode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>