summaryrefslogtreecommitdiffstats
path: root/drivers/serial
AgeCommit message (Collapse)Author
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix PCI ROM access powerpc/pseries: Really fix the oprofile CPU type on pseries serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. powerpc/cell: Make ptcal more reliable powerpc: Allow mem=x cmdline to work with 4G+ powerpc/mpic: Fix incorrect allocation of interrupt rev-map powerpc: Fix oprofile sampling of marked events on POWER7 powerpc/iseries: Fix pci breakage due to bad dma_data initialization powerpc: Fix mktree build error on Mac OS X host powerpc/virtex: Fix duplicate level irq events. powerpc/virtex: Add uImage to the default images list powerpc/boot: add simpleImage.* to clean-files list powerpc/8xx: Update defconfigs powerpc/embedded6xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
2009-05-15serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.Benjamin Krill
The receive interrupt routine checks the wrong register if the receive fifo is empty. Further an explicit interrupt acknowledge write is introduced. In some circumstances another interrupt was issued. Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) i.MX31: Disable CPU_32v6K in mx3_defconfig. mx3fb: Fix compilation with CONFIG_PM mx27ads: move PBC mapping out of vmalloc space MXC: remove BUG_ON in interrupt handler mx31: remove mx31moboard_defconfig ARM: ARCH_MXC should select HAVE_CLK mxc : BUG in imx_dma_request mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() [ARM] mv78xx0: update defconfig [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". [ARM] S3C2412: Add missing cache flush in suspend code [ARM] S3C: Add UDIVSLOT support for newer UARTS [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
2009-05-06jsm: removing unused spinlockBreno Leitao
This patch removes bd_lock spinlock (inside jsm_board structure). The lock is initialized in the probe function and not used anymore. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-03Merge branch 'v2630-rc3-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-05-02CRISv10: fix serial driver proc-usageJesper Nilsson
drivers/serial/crisv10.c:4428: error: unknown field 'read_proc' specified in initializer Commit 0f043a81ebe84be3576667f04fdda481609e3816 ("proc tty: remove struct tty_operations::read_proc") removes the read_proc entry from struct tty_operations. Rework the proc handling in the CRISv10 serial driver to use proc_fops instead. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-013c589_cs: add cis(firmware) of 3Com multifunction pcmcia cardKen Kawasaki
3c589_cs,3c574_cs,serial_cs: (1)add cis(firmware) of 3Com lan&modem mulitifunction pcmcia card. (2)load correct configuration register for 3Com card Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01[ARM] S3C: Add UDIVSLOT support for newer UARTSBen Dooks
Add support for the UDIVSLOT register on the newer UART blocks which gives the capability of 1/16ths adjustment to the baud rate. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-24serial: remove contact dataNiels de Vos
Remove my name and emailaddress from note in the source. Wincor Nixdorf only has some ITE-chips on their mainboards, other chips are not available for me for testing. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21bfin_5xx: misplaced parenthesesRoel Kluin
`!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-15[ARM] 5449/1: S3C: Use disable_irq_nosync() to fix boot lockupsMark Brown
With 2.6.30-rc1 on SMDK6410 I experience a soft lockup on bootup when the Samsung serial driver attempts to disable the transmit interrupt from within the transmit interrupt handler: it calls disable_irq() which locks up due to attempting to synchronise with the running handler. Fix this by using disable_irq_nosync(). Also make the same change in the recieve path. Backtrace: [<c002a914>] (__irq_svc+0x34/0x80) from [<c00696c0>] (synchr) [<c00696c0>] (synchronize_irq+0xc/0xcc) from [<c018d434>] (s) [<c018d434>] (s3c24xx_serial_stop_tx+0x1c/0x3c) from [<c018d) [<c018d54c>] (s3c24xx_serial_tx_chars+0xf8/0x104) from [<c00) [<c0068bcc>] (handle_IRQ_event+0x74/0x118) from [<c006ab04>]) [<c006ab04>] (handle_level_irq+0x100/0x118) from [<c00349c4>) [<c00349c4>] (s3c_irq_demux_uart+0x94/0xc4) from [<c002a050>) [<c002a050>] (_text+0x50/0x6c) from [<c002a914>] (__irq_svc+) Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-13Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (60 commits) microblaze_v8: Add MAINTAINERS fragment microblaze_v8: Uartlite for Microblaze microblaze_v8: Makefiles for Microblaze cpu microblaze_v8: Kconfig patches microblaze_v8: Interrupt handling and timer support microblaze_v8: syscalls.h microblaze_v8: pci headers microblaze_v8: Kbuild file microblaze_v8: string.h thread_info.h microblaze_v8: unistd.h microblaze_v8: fcntl.h sockios.h ucontext.h microblaze_v8: pool.h socket.h microblaze_v8: device.h param.h topology.h microblaze_v8: headers files entry.h current.h mman.h registers.h sembuf.h microblaze_v8: namei.h microblaze_v8: gpio.h, serial.h microblaze_v8: headers simple files - empty or redirect to asm-generic microblaze_v8: sigcontext.h siginfo.h microblaze_v8: termbits.h termios.h microblaze_v8: stats headers ...
2009-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Hook up sys_preadv and sys_pwritev sparc64: add_node_ranges() must be __init serial: sunsu: sunsu_kbd_ms_init needs to be __devinit sparc: Fix section mismatch warnings in cs4231 sound driver. sparc64: Fix section mismatch warnings in PCI controller drivers. sparc64: Fix section mismatch warnings in power driver. sparc64: get_cells() can't be marked __init
2009-04-08tty: MAX3100Alan Cox
Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-08serial: sunsu: sunsu_kbd_ms_init needs to be __devinitDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07tty: jsm cleanupsBreno Leitao
Here are some cleanups, mainly removing unused variables and silly declarations. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Adjust path to gpio headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07KGDB_SERIAL_CONSOLE check for moduleMike Frysinger
Depend on KGDB_SERIAL_CONSOLE being set to N rather than !Y, since it can be built as a module. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change KCONFIG nameMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change hardware flow control from poll to interrupt drivenSonic Zhang
Only the CTS bit is affected. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Add support for the MAX3100 SPI UART.Christian Pellegrin
(akpm: queued pending confirmation of the new major number) [randy.dunlap@oracle.com: select SERIAL_CORE] Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: Use the generic RS485 ioctl on CRISClaudio Scordino
Use the new general RS485 Linux data structure (introduced by Alan with commit number c26c56c0f40e200e61d1390629c806f6adaffbcc) in the Cris architecture too (currently, Cris still uses the old private data structure instead of the new one). Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Tested-by: Hinko Kocevar <hinko.kocevar@cetrtapot.si> Tested-by: Janez Cufer <janez.cufer@cetrtapot.si> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits) powerpc: Fix oops when loading modules powerpc: Wire up preadv and pwritev powerpc/ftrace: Fix printf format warning powerpc/ftrace: Fix #if that should be #ifdef powerpc: Fix ptrace compat wrapper for FPU register access powerpc: Print information about mapping hw irqs to virtual irqs powerpc: Correct dependency of KEXEC powerpc: Disable VSX or current process in giveup_fpu/altivec powerpc/pseries: Enable relay in pseries_defconfig powerpc/pseries: Fix ibm,client-architecture comment powerpc/pseries: Scan for all events in rtasd powerpc/pseries: Add dispatch dispersion statistics powerpc: Clean up some prom printouts powerpc: Print progress of ibm,client-architecture method powerpc: Remove duplicated #include's powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf fsl-diu-fb: Pass the proper device for dma mapping routines powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot. cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console. ...
2009-04-07powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBookBenjamin Herrenschmidt
The (relatively) new pmac_zilog driver doesn't use the pre-munged IRQ numbers from the macio_dev unlike other macio things, it directly maps it off the OF device-tree. It does that because it can be initialized much earlier than the registration of the macio devices, in order to get a serial console early. Unfortunately, that means that it "misses" some fixups done by the macio layer to work around missing interrupt descriptions in the device-tree of the Wallstreet machines. This patch brings the necessary workaround into the pmac_zilog driver itself to bring it back to working condition. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2009-04-068250: Fix warningAlan Cox
The 8430 patch was short a const so caused a warning. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06icom: remove unused variablesBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: Fix the return variable and removing the unused retval.Breno Leitao
As it was, the retval was never returned, so its assignments were silly. Just consolidate everything to rc, and remove the unused retval variable. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jsm: define init function as __devinitBreno Leitao
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06ucc: Fix leaky error pathAlan Cox
Found by Daniel Marjamäki using cppcheck Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Subtract ANOMALY_05000230 on quotGraf Yang
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Fix DMA rx ring buffer handlingSonic Zhang
Reported-by: Qian Zhang <zhangq@sansitech.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Fix tty compile error in PIO modeSonic Zhang
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Use unsigned long for flags with irq functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: BF538/9 serial uart supportMichael Hennerich
Enable third UART on BF538/9 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments legacy 8420 RS232 boardsWill Page
Signed-off-by: Will Page <will.page@ni.com> Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pci: add support for National Instruments 843x RS232 devicesShawn Bohrer
This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06serial: Update PNP IDsMatthew Garrett
Add new Wacom device IDs to the 8250_pnp serial driver, to support autoconfig on some newer tablet PCs. Also add a comment to clarify that the FUJ02E6 device is a custom protocol, not a Wacom tablet. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-068250_pnp.c: add another Wacom tabletDanny Kukawka
Add another serial Wacom tablet with pnp_id: WACF009. Signed-off-by: Danny Kukawka <dkukawka@suse.de> Signed-off-by: Alan Cox <alan@etchedpixels.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.Scott Wood
Previously, if udbg was using the CPM uart, and the normal CPM uart driver was enabled, but the console was directed elsewhere, udbg would not be stopped prior to initialization. This resulted in udbg hanging forever waiting for the CPM to process a descriptor. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-06cpm_uart: Initialize port.dev before it's used.Scott Wood
Previously, this caused NULL to sometimes be passed as a device to the DMA code. With recent DMA changes, that now causes a BUG(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-05Merge branch 'avr32-arch' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: add hardware handshake support to atmel_serial avr32: add RTS/CTS/CLK pin selection for the USARTs Add RTC support for Merisc boards avr32: at32ap700x: setup DMA for AC97C in the machine code avr32: at32ap700x: setup DMA for ABDAC in the machine code Add Merisc board support avr32: use gpio_is_valid() to check USBA vbus_pin I/O line atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line avr32: fix timing LCD parameters for EVKLCD10X boards avr32: use GPIO line PB15 on EVKLCD10x boards for backlight avr32: configure MCI detect and write protect pins for EVKLCD10x boards avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards avr32: add pin mask for 18-bit color on the LCD controller avr32: fix 15-bit LCDC pin mask to use MSB lines
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits) m68knommu: improve compile arch switch settings m68knommu: fix 5407 ColdFire UART vector setup m68knommu: fix 5307 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART setup m68knommu: fix end of uart table marker m68knommu: switch to using generic_handle_irq() m68k: merge the mmu and non-mmu versions of tlbflush.h m68knommu: introduce basic clk infrastructure m68k: merge the mmu and non-mmu versions of module.h m68knommu: add missing interrupt line definition for UART 2 m68k: merge the mmu and non-mmu versions of mmu_context.h m68k: merge the mmu and non-mmu versions of current.h m68k: merge the mmu and non-mmu versions of div64.h m68k: merge the mmu and non-mmu versions of bugs.h m68k: merge the mmu and non-mmu versions of bug.h m68k: use the mmu version of cache.h for m68knommu as well m68k: use the mmu version of bootinfo.h for m68knommu as well m68k: merge the mmu and non-mmu versions of fb.h m68k: merge the mmu and non-mmu versions of segment.h ...
2009-04-01serial: fixup /proc/tty/driver/serial after proc_fops conversionAlexey Dobriyan
"struct tty_driver *" lies in m->private not in v which is SEQ_TOKEN_START which is 1 which is enough to trigger NULL dereference next line: BUG: unable to handle kernel NULL pointer dereference at 000000ad IP: [<c040d689>] uart_proc_show+0xe/0x2b0 Noticed by Linus. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01proc tty: switch serial_core to ->proc_fopsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01avr32: add hardware handshake support to atmel_serialPeter Ma
Adds Hardware Handshake (aka RTS/CTS flow-control) support to atmel_serial driver, as a termios flag. For this to actually work, the platform code needs to configure the RTS and CTS pins for use by the USART. This has been done for AVR32 as a separate patch. Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>