summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi.c
AgeCommit message (Collapse)Author
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree changes from Grant Likely: "All around device tree changes destined for v3.8. Aside from the documentation updates the highlights in this branch include: - Kbuild changes for using CPP with .dts files - locking fix from preempt_rt patchset - include DT alias names in device uevent - Selftest bugfixes and improvements - New function for counting phandles stanzas in a property - constify argument to of_node_full_name() - Various bug fixes This tree did also contain a commit to use platform_device_add instead of open-coding the device add code, but it caused problems with amba devices and needed to be reverted." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits) Revert "of: use platform_device_add" kbuild: limit dtc+cpp include path gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() of: Create function for counting number of phandles in a property of/base: Clean up exit paths for of_parse_phandle_with_args() of/selftest: Use selftest() macro throughout of/selftest: Fix GPIOs selftest to cover the 7th case of: fix recursive locking in of_get_next_available_child() documentation/devicetree: Fix a typo in exynos-dw-mshc.txt OF: convert devtree lock from rw_lock to raw spinlock of/exynos_g2d: Add Bindings for exynos G2D driver kbuild: create a rule to run the pre-processor on *.dts files input: Extend matrix-keypad device tree binding devicetree: Move NS2 LEDs binding into LEDs directory of: use platform_device_add powerpc/5200: Fix size to request_mem_region() call documentation/devicetree: Fix typos of: add 'const' to of_node_full_name parameter of: Output devicetree alias names in uevent DT: add vendor prefixes for Renesas and Toshiba ...
2013-02-20Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull SPI changes from Grant Likely: "Changes to both core spi code and spi device drivers. The driver changes are the usual set of bug fixes and platform enablement. Core code changes include: - More intelligent assignment of SPI bus numbers when using DT - Common mechanism for using gpios as CS lines - Pull checks for bits_per_word and transfer speed out of drivers and into core code - Ensure temporary DMA buffers are DMA safe" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits) spi: Document cs_gpios and cs_gpio in kernel-doc spi/of: Fix initialization of cs_gpios array spi/pxa2xx: add support for Lynxpoint SPI controllers spi/pxa2xx: add support for Intel Low Power Subsystem SPI spi/pxa2xx: add support for SPI_LOOP spi/pxa2xx: add support for runtime PM spi/pxa2xx: add support for DMA engine spi/pxa2xx: break out the private DMA API usage into a separate file spi/ath79: add shutdown handler spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag spi/mips-lantiq: make use of spi_finalize_current_message spi/bcm63xx: work around inability to keep CS up spi/davinci: use request_threaded_irq() to fix deadlock spi/orion: Use module_platform_driver() spi/bcm63xx: reject transfers unable to transfer spi: Ensure memory used for spi_write_then_read() is DMA safe spi/spi-mpc512x-psc: init mode bits supported by the driver spi/mpc512x-psc: don't use obsolet cell-index property spi: Remove erroneous __init, __exit and __exit_p() references in drivers spi/s3c64xx: fix checkpatch warnings and error ...
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2013-02-10spi/of: Fix initialization of cs_gpios arrayAndreas Larsson
Using memset does not set an array of integers properly. Replace with a loop to set each element properly. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-07sched/rt: Move rt specific bits into new header fileClark Williams
Move rt scheduler definitions out of include/linux/sched.h into new file include/linux/sched/rt.h Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-05spi: Ensure memory used for spi_write_then_read() is DMA safeMark Brown
Use GFP_DMA in order to ensure that the memory we allocate for transfers in spi_write_then_read() can be DMAed. On most platforms this will have no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi: make sure all transfer has proper speed setLaxman Dewangan
When spi client does the spi transfer and if it does not set the speed for each transfer then set it as default of spi device in spi core before calling low level transfer. This will remove the extra check in low level driver for setting speed. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/of: Use DT aliases for assigning bus numberGrant Likely
Linux assigns a number to each spi_master in the system, but when the platform used the device tree, the numbers are dynamically assigned and are not predictable. In general this shouldn't matter since the kernel doesn't use the bus number for anything other than matching a bus to spi_boardinfo (not used for DT). However, sometimes userspace needs to figure out which bus is which, so it makes sense to use the global /aliases namespace to choose a specific bus number. It is safe to derive the bus number from an alias because aliases will never cause two buses to try and use the same bus number. (At one time the cell-index property was used for this purpose, but cell-index has the risk of an id collision). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-15of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.David Daney
To get modprobe to automatically load the proper modules, we need to prefix things with "spi:". Partially based on Grant Likely's suggestions. Signed-off-by: David Daney <david.daney@cavium.com> [grant.likely: reworked because drivers/of/of_spi.c has been removed] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-13Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI updates from Grant Likely: "Primarily SPI device driver bug fixes, one removal of an old driver, and some new tegra support. There is some core code change too, but all in all pretty small stuff. The new features to note are: - Common code for describing GPIO CS lines in the device tree - Remove the SPI_BUFSIZ limitation on spi_write_the_read() - core spi ensures bits_per_word is set correctly - SPARC can now use SPI" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (36 commits) spi/sparc: Allow of_register_spi_devices for sparc spi: Remove HOTPLUG section attributes spi: Add support for specifying 3-wire mode via device tree spi: Fix comparison of different integer types spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver. spi/sh: Add SH Mobile series as dependency to MSIOF controller spi/sh-msiof: Remove unneeded clock name spi: Remove SPI_BUFSIZ restriction on spi_write_then_read() spi/stmp: remove obsolete driver spi/clps711x: New SPI master driver spi: omap2-mcspi: remove duplicate inclusion of linux/err.h spi: omap2-mcspi: Fix the redifine warning spi/sh-hspi: add CS manual control support of_spi: add generic binding support to specify cs gpio spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.c spi/bitbang: (cosmetic) simplify list manipulation spi/bitbang: avoid needless loop flow manipulations spi/omap: fix D0/D1 direction confusion spi: tegra: add spi driver for sflash controller spi: Dont call master->setup if not populated ...
2012-12-11Merge tag 'pm+acpi-for-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Introduction of device PM QoS flags. - ACPI device power management update allowing subsystems other than PCI to use it more easily. - ACPI device enumeration rework allowing additional kinds of devices to be enumerated via ACPI. From Mika Westerberg, Adrian Hunter, Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki. - ACPICA update to version 20121018 from Bob Moore and Lv Zheng. - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu. - Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU hot-remove support from Toshi Kani. - ACPI EC updates from Feng Tang. - cpufreq updates from Viresh Kumar, Fabio Baltieri and others. - cpuidle changes to quickly notice governor prediction failure from Youquan Song. - Support for using multiple cpuidle drivers at the same time and cpuidle cleanups from Daniel Lezcano. - devfreq updates from Nishanth Menon and others. - cpupower update from Thomas Renninger. - Fixes and small cleanups all over the place. * tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits) mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6 ACPI: add Haswell LPSS devices to acpi_platform_device_ids list ACPI: add documentation about ACPI 5 enumeration pnpacpi: fix incorrect TEST_ALPHA() test ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 ACPI : do not use Lid and Sleep button for S5 wakeup ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set spi / ACPI: add ACPI enumeration support gpio / ACPI: add ACPI support PM / devfreq: remove compiler error with module governors (2) cpupower: IvyBridge (0x3a and 0x3e models) support cpupower: Provide -c param for cpupower monitor to schedule process on all cores cpupower tools: Fix warning and a bug with the cpu package count cpupower tools: Fix malloc of cpu_info structure cpupower tools: Fix issues with sysfs_topology_read_file cpupower tools: Fix minor warnings cpupower tools: Update .gitignore for files created in the debug directories ...
2012-12-10spi/sparc: Allow of_register_spi_devices for sparcAndreas Larsson
The spi support code works on SPARC too. No reason to exclude it from the party. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Add support for specifying 3-wire mode via device treeLars-Peter Clausen
This patch allows to specify that a SPI device is connected in 3-wire mode via device tree. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Fix comparison of different integer typesGrant Likely
Fix problem discovered with sparse: + drivers/spi/spi.c:1554:37: sparse: incompatible types in comparison expression (different signedness) drivers/spi/spi.c: In function 'spi_write_then_read': drivers/spi/spi.c:1554:23: warning: comparison of distinct pointer types lacks a cast [enabled by default] The change to SPI_BUFSIZ was introduced in commit b3a223ee2, "spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()" Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()Mark Brown
In order to avoid constantly allocating and deallocating there is a fixed buffer which spi_write_then_read() uses for transfers, with an early error check to ensure that the transfer fits within the buffer. This limits the size of transfers to this size, currently max(32, SMP_CACHE_BYTES). Since we can dynamically allocate and in fact already have a fallback to do so when there is contention for the fixed buffer remove this restriction and instead dynamically allocate a suitably sized buffer if the transfer won't fit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06Merge branch 'spi-next' from ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git Pull in the changes Mark has queued up for SPI
2012-11-30spi / ACPI: add ACPI enumeration supportMika Westerberg
ACPI 5 introduced SPISerialBus resource that allows us to enumerate and configure the SPI slave devices behind the SPI controller. This patch adds support for this to the SPI core. In addition we bind ACPI nodes to SPI devices. This makes it possible for the slave drivers to get the ACPI handle for further configuration. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-29of/spi: Honour "status=disabled" property of deviceAlexander Sverdlin
Currently of_register_spi_devices() function registers all SPI devices, independetly from their status property in device tree. According to "ePAPR 1.1" spec, device should only be registered if there is no "status" property, or it has "ok" (or "okay") value (see of_device_is_available()). In case of "platform devices", of_platform_device_create_pdata() checks for "status" and ensures that disabled devices are not pupulated. But such check for SPI buses was missing until now. Fix it. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-21of_spi: add generic binding support to specify cs gpioJean-Christophe PLAGNIOL-VILLARD
This will allow to use gpio for chip select with no modification in the driver binding When use the cs-gpios, the gpio number will be passed via the cs_gpio field and the number of chip select will automatically increased with max(hw cs, gpio cs). So if for example the controller has 2 CS lines, and the cs-gpios property looks like this: cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>; Then it should be configured so that num_chipselect = 4 with the following mapping: cs0 : &gpio1 0 0 cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [grant.likely: fixed up type of cs count so min() can do type checking] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-09Merge branches 'spi-core' and 'spi-tegra' into spi-nextMark Brown
2012-11-09spi: Dont call master->setup if not populatedLaxman Dewangan
Currently the master->setup() is called unconditionally. The assumption is that every driver need to implement this callback. This encourages drivers to populate empty functions to prevent crashing. This patch prevents the call of master->setup() if it is not populated. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09spi: make sure all transfer has bits_per_word setLaxman Dewangan
When spi client does the spi transfer and does not sets the bits_per_word for each transfer then set it as default of spi device in spi core before calling low level transfer. Removing the similar code from spi-tegra20-slink driver as it is not required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20spi: Add "spi:" prefix to modalias attribute of spi devicesGrant Likely
The modalias attribute of spi devices doesn't have the "spi:" prefix that is used in the UEVENT and in spi device drivers. This patch adds the prefix so the modprobe can correctly match modules to devices. Reported-by: David Daney <david.daney@cavium.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi: By default setup spi_masters with 1 chipselect and dynamics bus numberGrant Likely
Trivial simplification. Instead of requiring spi master drivers to always set the bus number (even when a dynamic number is desired), this patch modifies spi_alloc_master() to initialize num_chipselect to 1 (because there will always be at least one CS) and bus_num to -1 for dynamic allocation. This simplifies the code needed to be written for drivers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-10spi: Dont call prepare/unprepare transfer if not populatedShubhrajyoti D
Currently the prepare/unprepare transfer are called unconditionally. The assumption is that every driver using the spi core queue infrastructure has to populate the prepare and unprepare functions. This encourages drivers to populate empty functions to prevent crashing. This patch prevents the call to prepare/unprepare if not populated. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: fix whitespace defect] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-13spi/devicetree: Move devicetree support code into spi directoryGrant Likely
The SPI device tree support code isn't shared by any other subsystem. It can be moved into the core drivers/spi directory and the exported symbol can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com>
2012-03-15spi: remove redundant variable assignmentGuennadi Liakhovetski
The status variable is guaranteed to be 0 at that location anyway. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-10spi: release lock on error path in spi_pump_messages()Dan Carpenter
We should release the lock here and enable IRQs before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [grant.likely: move unlock above dev_err() call] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi: Mark spi_register_board_info() __devinitMark Brown
Some systems have SPI devices located on plugin modules which are enumerated at runtime as devices. The drivers for these plugin modules need to register their SPI devices at probe() time so want to be able to call spi_register_board_info() but that function is currently marked as __init rather than __devinit so this usage isn't legal. Change the annotation to __devinit to handle this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi/doc: spi_master_put must be followed up by kfreeUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-07spi: create a message queueing infrastructureLinus Walleij
This rips the message queue in the PL022 driver out and pushes it into (optional) common infrastructure. Drivers that want to use the message pumping thread will need to define the new per-messags transfer methods and leave the deprecated transfer() method as NULL. Most of the design is described in the documentation changes that are included in this patch. Since there is a queue that need to be stopped when the system is suspending/resuming, two new calls are implemented for the device drivers to call in their suspend()/resume() functions: spi_master_suspend() and spi_master_resume(). ChangeLog v1->v2: - Remove Kconfig entry and do not make the queue support optional at all, instead be more agressive and have it as part of the compulsory infrastructure. - If the .transfer() method is implemented, delete print a small deprecation notice and do not start the transfer pump. - Fix a bitrotted comment. ChangeLog v2->v3: - Fix up a problematic sequence courtesy of Chris Blair. - Stop rather than destroy the queue on suspend() courtesy of Chris Blair. Signed-off-by: Chris Blair <chris.blair@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13spi: Fix device unregistration when unregistering the bus masterLaurent Pinchart
Device are added as children of the bus master's parent device, but spi_unregister_master() looks for devices to unregister in the bus master's children. This results in the child devices not being unregistered. Fix this by registering devices as direct children of the bus master. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add export.h for THIS_MODULE/EXPORT_SYMBOL to spi.cPaul Gortmaker
This uses both EXPORT_SYMBOL and THIS_MODULE, both which come from the export.h file now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-20spi: Use void pointers for data in simple SPI I/O operationsMark Brown
Currently the simple SPI I/O operations all take pointers to u8 * buffers to operate on. This creates needless type compatibility issues and the underlying spi_transfer structure uses void pointers anyway so convert the API over to take void pointers too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-25spi / PM: Support dev_pm_opsMark Brown
Allow SPI drivers to use runtime PM and other dev_pm_ops features by implementing dev_pm_ops for the bus. The existing bus specific suspend and resume functions will be called if a driver does not provide dev_pm_ops allowing for transition to the new model. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-22drivers/spi/spi.c: don't release the spi device twiceSebastian Andrzej Siewior
This was fixed by David Lamparter in v2.6.36-rc5 3486008 ("spi: free children in spi_unregister_master, not siblings") and broken again in v2.6.37-rc1~2^2~4 during the merge of 2b9603a0 ("spi: enable spi_board_info to be registered after spi_master"). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-22spi: fixed odd static string conventions in core codeLinus Walleij
This patch removes convention of passing a static string as a parameter to another static string. The convention is intended to reduce text usage by sharing the common bits of the string, but the implementation is inherently fragile (a change to one format string but not the other will nullify any possible advantage), it isn't necessarily a net win depending on what this compiler does, and it it reduces code readability. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [grant.likely@secretlab.ca: removed dev_dbg->dev_err hunk] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-21spi: enable spi_board_info to be registered after spi_masterFeng Tang
Currently spi_register_board_info() has to be called before its related spi_master be registered, otherwise these board info will be just ignored. This patch will remove this order limit, it adds a global spi master list like the existing global board info listr. Whenever a board info or a spi_master is registered, the spi master list or board info list will be scanned, and a new spi device will be created if there is a master-board info match. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-02of/spi: Fix OF-style driver binding of spi devicesSinan Akman
This patch adds the OF hook to the spi core so that devices can automatically be registered based on device tree data. This fixes a problem with spi devices not binding to drivers after the cleanup of the spi & i2c binding code. Signed-off-by: Sinan Akman <sinan@writeme.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-01spi: free children in spi_unregister_master, not siblingsDavid Lamparter
introduced by 49dce689 ("spi doesn't need class_device") and bad-fixed by 350d0076 ("spi: fix double-free on spi_unregister_master"), spi_unregister_master would previously device_unregister all of the spi master's siblings (instead of its children). hilarity ensues. fix it to unregister children. Signed-off-by: David Lamparter <equinox@diac24.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/amba_pl022: Fix probe and remove hook section annotations. spi/mpc5121: change annotations for probe and remove functions spi/bitbang: reinitialize transfer parameters for every message spi/spi-gpio: add support for controllers without MISO or MOSI pin spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes SPI100k: Fix 8-bit and RX-only transfers spi/mmc_spi: mmc_spi adaptations for SPI bus locking API spi/mmc_spi: SPI bus locking API, using mutex Fix trivial conflict in drivers/spi/mpc512x_psc_spi.c due to 'struct of_device' => 'struct platform_device' rename and __init/__exit to __devinit/__devexit fix.
2010-07-30of/spi: call of_register_spi_devices() from spi core codeAnatolij Gustschin
Move of_register_spi_devices() call from drivers to spi_register_master(). Also change the function to use the struct device_node pointer from master spi device instead of passing it as function argument. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-28spi/mmc_spi: SPI bus locking API, using mutexErnst Schwab
SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-04-28spi: spi_device memory should be released instead of device.Roman Tereshonkov
The memory for dev variable is allocated as a part of spi_device structure memory which the dev belongs to. Thus when the memory is released the right pointer is used. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28spi: release device claimed by bus_find_device_by_nameRoman Tereshonkov
In success case the function bus_find_device_by_name calls get_device. In our context put_device should be called to decrease the device count usage. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>