summaryrefslogtreecommitdiffstats
path: root/drivers/spi
AgeCommit message (Collapse)Author
2014-09-13spi: dw-mid: remove FSF address and update copyrightAndy Shevchenko
The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: remove redundant dmac memberAndy Shevchenko
Instead of using that member we prefer to use dma_dev which represents actual struct device of the DMA device. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: remove Moorestown supportAndy Shevchenko
The support of the Moorestown was removed [1] from kernel long time ago. This is just a follow up of that change. [1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw-mid: check that DMA was inited before exitAndy Shevchenko
If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13spi: dw: remove FSF addressAndy Shevchenko
There is no need to keep FSF address in the head of the file. While here, fix few typos in the header. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-09spi/pl022: Fix error messageRoland Stigge
This patch fixes an error message typo ("not" missing). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-04spi/rockchip: Don't warn if SPI is busy but disabledDoug Anderson
The reference manual from Rockchip claims this about the BSF (SPI Busy Flag): * 0 - SPI is idle or disabled * 1 - SPI is actively transferring data The above doesn't quite appear to be true. Specifically I found the busy bit set when SPI was disabled. Let's change the WARN_ON() so we only check the busy bit if the controller was enabled. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi/rockchip: Fix the wait_for_idle() timeoutDoug Anderson
The wait_for_idle() could get unlucky and timeout too quickly. Specifically, the old calculation was effectively: timeout = jiffies + 1; if (jiffies >= timeout) print warning; From the above it should be obvious that if jiffies ticks in just the wrong place then we'll have an effective timeout of 0. Fix this by effectively changing the above ">=" to a ">". That gives us an extra jiffy to finish. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi: sirf: cleanup the indentation of marcosQipan Li
let "#define" statement keep same indentation. the old code layout is pretty ugly. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi: sirf: add fifo reset/start for cmd transferQipan Li
for command mode spi transfer, HW spec requires to do fifo reset work to clear FIFO status. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi: sirf: fix 'cmd_transfer' function typosQipan Li
unify 'cmd_transfer' like 'pio_transfer' and 'dma_transfer' as void function, and also change left_rx_word according to transfer result. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi: sirf: enable RX_IO_DMA_INT interruptQipan Li
in spi interrupt handler, we need check RX_IO_DMA status to ensure rx fifo have received the specify count data. if not set, the while statement in spi isr function will keep loop, at last, make the kernel hang. [The code is actually there in the interrupt handler but apparently it needs the interrupt unmasking so the handler sees the status -- broonie] Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-04spi: sirf: correct spi gpio and hardware chipselect behaviourQipan Li
the old codes check the cs-gpios, if the gpio number is 0 like: <&gpio, 0, 0>, the driver will use the only hardware chipselect. this is wrong because of_spi_register_master() can read property cs-gpios from device node and set the spi master's cs number and gpio cs automatically based on whether the cs-gpios is valid. this patch fixes the beviour of CSR spi driver and move to a core level supported way. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: txx9: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. Missing a blank line after declarations. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: tegra20-sflash: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: macros should not use a trailing semicolon WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: tegra114: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: orion: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: else is not generally useful after a break or return WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: dw: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required WARNING: min() should probably be min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR)) WARNING: else is not generally useful after a break or return WARNING: Missing a blank line after declarations WARNING: void function return statements are not generally useful Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03spi: davinci: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-02spi: spi-mxs: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations WARNING: Prefer kcalloc over kzalloc with multiply Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-02spi: xtensa-xtfpga: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-02spi: ep93xx: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Missing a blank line after declarations Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw: Don't use devm_kzalloc in master->setup callbackAxel Lin
device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: WARNING: CPU: 1 PID: 1 at drivers/base/dd.c:286 driver_probe_device+0x2b4/0x2f4() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-10474-g835c90b-dirty #160 [<c0016364>] (unwind_backtrace) from [<c001251c>] (show_stack+0x20/0x24) [<c001251c>] (show_stack) from [<c04eaefc>] (dump_stack+0x7c/0x98) [<c04eaefc>] (dump_stack) from [<c0023d4c>] (warn_slowpath_common+0x78/0x9c) [<c0023d4c>] (warn_slowpath_common) from [<c0023d9c>] (warn_slowpath_null+0x2c/0x34) [<c0023d9c>] (warn_slowpath_null) from [<c0302c60>] (driver_probe_device+0x2b4/0x2f4) [<c0302c60>] (driver_probe_device) from [<c0302d90>] (__device_attach+0x50/0x54) [<c0302d90>] (__device_attach) from [<c0300e60>] (bus_for_each_drv+0x54/0x9c) [<c0300e60>] (bus_for_each_drv) from [<c0302958>] (device_attach+0x84/0x90) [<c0302958>] (device_attach) from [<c0301f10>] (bus_probe_device+0x94/0xb8) [<c0301f10>] (bus_probe_device) from [<c03000c0>] (device_add+0x434/0x4fc) [<c03000c0>] (device_add) from [<c0342dd4>] (spi_add_device+0x98/0x164) [<c0342dd4>] (spi_add_device) from [<c03444a4>] (spi_register_master+0x598/0x768) [<c03444a4>] (spi_register_master) from [<c03446b4>] (devm_spi_register_master+0x40/0x80) [<c03446b4>] (devm_spi_register_master) from [<c0346214>] (dw_spi_add_host+0x1a8/0x258) [<c0346214>] (dw_spi_add_host) from [<c0346920>] (dw_spi_mmio_probe+0x1d4/0x294) [<c0346920>] (dw_spi_mmio_probe) from [<c0304560>] (platform_drv_probe+0x3c/0x6c) [<c0304560>] (platform_drv_probe) from [<c0302a98>] (driver_probe_device+0xec/0x2f4) [<c0302a98>] (driver_probe_device) from [<c0302d3c>] (__driver_attach+0x9c/0xa0) [<c0302d3c>] (__driver_attach) from [<c0300f0c>] (bus_for_each_dev+0x64/0x98) [<c0300f0c>] (bus_for_each_dev) from [<c0302518>] (driver_attach+0x2c/0x30) [<c0302518>] (driver_attach) from [<c0302134>] (bus_add_driver+0xdc/0x1f4) [<c0302134>] (bus_add_driver) from [<c03035c8>] (driver_register+0x88/0x104) [<c03035c8>] (driver_register) from [<c030445c>] (__platform_driver_register+0x58/0x6c) [<c030445c>] (__platform_driver_register) from [<c0700f00>] (dw_spi_mmio_driver_init+0x18/0x20) [<c0700f00>] (dw_spi_mmio_driver_init) from [<c0008914>] (do_one_initcall+0x90/0x1d4) [<c0008914>] (do_one_initcall) from [<c06d7d90>] (kernel_init_freeable+0x178/0x248) [<c06d7d90>] (kernel_init_freeable) from [<c04e687c>] (kernel_init+0x18/0xfc) [<c04e687c>] (kernel_init) from [<c000ecd8>] (ret_from_fork+0x14/0x20) Reported-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-01spi: dw-pci: remove FSF address and update copyrightAndy Shevchenko
The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: provide platform specific data via driver_dataAndy Shevchenko
Instead of checking for device and vendor IDs inside probe function let's provide a helper function via driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: convert to use dev_pm_opsAndy Shevchenko
Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls related to a power state since the bus code cares about this already. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: apply pci_bar and re-use pci_nameAndy Shevchenko
Nevertheless pci_bar is 0 let's explicitly use it when map IO regions. While here, use pci_name instead of dev_name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: move info message at the end of probeAndy Shevchenko
Let's print info message when controller is found and properly initialized. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: fsl: Don't use devm_kzalloc in master->setup callbackAxel Lin
device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31spi/drivers: Restrict COMPILE_TEST by HAS_DMA where neededGeert Uytterhoeven
commit dd1053a93fdc11d4 ("spi/drivers: Enable build of drivers with COMPILE_TEST") allows compile-testing drivers on platforms they're not meant for. However, adding "|| COMPILE_TEST" bypasses all other implicit dependencies assumed by the platform dependencies before, like HAS_DMA. If NO_DMA=y: drivers/built-in.o: In function `atmel_spi_dma_unmap_xfer': drivers/spi/spi-atmel.c:915: undefined reference to `dma_unmap_single' drivers/spi/spi-atmel.c:918: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_spi_next_xfer_data': drivers/spi/spi-atmel.c:690: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_spi_dma_map_xfer': drivers/spi/spi-atmel.c:890: undefined reference to `dma_map_single' drivers/spi/spi-atmel.c:893: undefined reference to `dma_mapping_error' drivers/spi/spi-atmel.c:897: undefined reference to `dma_map_single' drivers/spi/spi-atmel.c:900: undefined reference to `dma_mapping_error' drivers/spi/spi-atmel.c:902: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_spi_probe': drivers/spi/spi-atmel.c:1540: undefined reference to `dma_alloc_coherent' drivers/spi/spi-atmel.c:1623: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `atmel_spi_remove': drivers/spi/spi-atmel.c:1665: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ep93xx_spi_dma_finish': drivers/spi/spi-ep93xx.c:550: undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `ep93xx_spi_dma_prepare': drivers/spi/spi-ep93xx.c:516: undefined reference to `dma_map_sg' drivers/spi/spi-ep93xx.c:522: undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `omap2_mcspi_rx_dma': drivers/spi/spi-omap2-mcspi.c:475: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `omap2_mcspi_txrx_dma': drivers/spi/spi-omap2-mcspi.c:589: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `omap2_mcspi_transfer_one_message': drivers/spi/spi-omap2-mcspi.c:1202: undefined reference to `dma_map_single' drivers/spi/spi-omap2-mcspi.c:1204: undefined reference to `dma_mapping_error' drivers/spi/spi-omap2-mcspi.c:1211: undefined reference to `dma_map_single' drivers/spi/spi-omap2-mcspi.c:1213: undefined reference to `dma_mapping_error' drivers/spi/spi-omap2-mcspi.c:1217: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `tegra_spi_deinit_dma_param': drivers/spi/spi-tegra114.c:675: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `tegra_spi_copy_spi_rxbuf_to_client_rxbuf': drivers/spi/spi-tegra114.c:415: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra114.c:440: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_spi_copy_client_txbuf_to_spi_txbuf': drivers/spi/spi-tegra114.c:381: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra114.c:405: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_spi_start_dma_based_transfer': drivers/spi/spi-tegra114.c:543: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_deinit_dma_param': drivers/spi/spi-tegra20-slink.c:705: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `tegra_slink_copy_spi_rxbuf_to_client_rxbuf': drivers/spi/spi-tegra20-slink.c:427: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra20-slink.c:452: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_copy_client_txbuf_to_spi_txbuf': drivers/spi/spi-tegra20-slink.c:393: undefined reference to `dma_sync_single_for_cpu' drivers/spi/spi-tegra20-slink.c:417: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `tegra_slink_start_dma_based_transfer': drivers/spi/spi-tegra20-slink.c:561: undefined reference to `dma_sync_single_for_cpu' Add dependencies on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-31Merge remote-tracking branch 'spi/fix/sh-msiof' into spi-linusMark Brown
2014-08-31spi: sh-msiof: Fix transmit-only DMA transfersGeert Uytterhoeven
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-30Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', ↵Mark Brown
'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
2014-08-29spi: bcm53xx: make local symbol staticJingoo Han
Make local symbol static, because this is used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-29spi/rockchip: Avoid accidentally turning off the clockDoug Anderson
If our client is requesting a clock that is above the maximum clock then the following division will result in 0: rs->max_freq / rs->speed We'll then program 0 into the SPI_BAUDR register. The Rockchip TRM says: "If the value is 0, the serial output clock (sclk_out) is disabled." It's much better to end up with the fastest possible clock rather than a clock that is off, so enforce a minimum value. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-28spi: sh-msiof: Add support for new R-Car Gen2 SoCsGeert Uytterhoeven
Add support for MSIOF in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-28spi: rspi: Add support for new R-Car Gen2 SoCsGeert Uytterhoeven
Add support for QSPI in: - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-27spi: dw: fix kernel crash due to NULL pointer dereferenceAndy Shevchenko
The obvious fix after the commit d9c73bb8a3a5 "spi: dw: add support for gpio controlled chip select". This patch fixes the issue by using locally defined temporary variable. Fixes: d9c73bb8a3a5 (spi: dw: add support for gpio controlled chip select) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org>
2014-08-27spi: dw-pci: fix bug when regs left uninitializedAndy Shevchenko
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-21spi: davinci: fix SPI_NO_CS functionalityGrygorii Strashko
The driver should not touch CS lines if SPI_NO_CS flag is set. This patch fixes it as this functionality was broken accidentally by commit a88e34ea213e1b ("spi: davinci: add support to configure gpio cs through dt"). Fixes: a88e34ea213e1b ("spi: davinci: add support to configure gpio cs through dt") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-20spi/rockchip: fixup incorrect dma direction settingAddy Ke
Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-20spi/pxa2xx: Add ACPI ID for Intel BraswellAlan Cox
The SPI host controller is the same as used in Baytrail, only the ACPI ID is different so add this new ID to the list. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-19spi: spi-au1550: fix build failureManuel Lauss
Fix a build failure introduced with commit 30670539b86 (spi: au1550: Fix bug in deallocation of memory) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19spi/pxa2xx-pci: remove unnecessary assignmentAndy Shevchenko
There is no need to unset driver data pointer at removal stage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19spi: Only call transfer_one() if we have buffers to transferMark Brown
Client drivers such as the ChomeOS EC driver sometimes use transfers with no buffers and only a delay specified in order to allow a delay after the assertion of /CS. Rather than require controller drivers handle this noop case gracefully put checks in the core to ensure that we don't call into the controller for such transfers. Reported-by: Addy Ke <addy.ke@rock-chips.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19spi: bcm53xx: driver for SPI controller on Broadcom bcma SoCRafał Miłecki
Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA devices). If board has a serial flash, it's connected over SPI and the bcma bus includes a SPI controller. Example log from such a board: bus0: Found chip with id 53010, rev 0x00 and package 0x02 (...) bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) This patch adds a bcma driver for SPI core, it registers SPI master controller and "bcm53xxspiflash" SPI device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-18spi: fsl-dspi: Convert to use regmap framework's endianness method.Xiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Acked-by: Chao Fu <b44548@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16spi/pxa2xx-pci: Add common clock framework support in PCI glue layerChew, Chiau Ee
SPI PXA2XX core layer has dependency on common clock framework to obtain information on host supported clock rate. Thus, we setup the clock device in the PCI glue layer to enable PCI mode host pass in the clock rate information. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Acked-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16spi: xilinx: Remove .owner field for driverMichal Simek
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16spi: sh-msiof: Fix transmit-only DMA transfersGeert Uytterhoeven
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 02:00:01 +0000