summaryrefslogtreecommitdiffstats
path: root/drivers/ssb
AgeCommit message (Collapse)Author
2011-05-11ssb: move ssb_commit_settings and export itRafał Miłecki
Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: update list of devices supporting multiple 80211 coresRafał Miłecki
Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02ssb: cc: prepare clockmode support for cores rev 10+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: early fix for SPROM core indexRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: update PCIe workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: separate workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26ssb: update reject bit for Target State LowRafał Miłecki
My 14e4:4315 is SSB_IDLOW_SSBREV_26: read32 0xfaafcff8 -> 0x600422d5 My 14e4:4328 is SSB_IDLOW_SSBREV_24: read32 0xfaafcff8 -> 0x400422c5 My 14e4:432b is SSB_IDLOW_SSBREV_26 again: read32 0xfaafcff8 -> 0x600422d5 For all of them wl driver is using 0x2 reject bit: write32(0xf98) <- 0x00010002 So it seems SSB 2.3 is the exception using another bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26ssb: mark bus as powered up earlierRafał Miłecki
ssb_chipco_set_clockmode may want to touch CC registers to control power of the bus. However touching registers without powered_up set causes warnings. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: cc: clear GPIOPULL registers on initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: cc: use correct min_msk for 0x4312Rafał Miłecki
Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow specs and wl (noticed in MMIO dumps). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ssb: pci: trivial: correct amount of maximum retriesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: implement serdes workaroundRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: implement mdio readingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: fix mdio writes on newer cores (rev 10+)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: pci: trivial: drop useless pointerRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ssb: trivial: use u8 for chip_rev (it's mask is 0xF)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18ssb: reset device only if it was enabledRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: when needed, reject IM input while disabling deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: trivial: fix SPROM extract warning formattingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: Make ssb_wait_bit multi-bit safeMichael Büsch
ssb_wait_bit was designed for only one-bit bitmasks. People start using it for multi-bit bitmasks. Make the "set" case is safe for this. The "unset" case is already safe. This does not change behavior of the current code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ssb: extract boardflags2 for SPROMs rev 4 and 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-07ssb-pcmcia: Fix parsing of invariants tuplesMichael Büsch
This fixes parsing of the device invariants (MAC address) for PCMCIA SSB devices. ssb_pcmcia_do_get_invariants expects an iv pointer as data argument. Tested-by: dylan cristiani <d.cristiani@idem-tech.it> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10ssb: Ignore dangling ethernet cores on wireless devicesMichael Büsch
Some Broadcom based wireless devices contain dangling ethernet cores. This triggers the ssb probing mechanism and tries to load the b44 driver on this core. Ignore the dangling core in the ssb core scanning code to avoid access to the core and failure of b44 probing. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ssb: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: Add sysfs attributes to ssb devicesHauke Mehrtens
Make it possible to read out the attributes, till now only show on dmesg, through sysfs. This patch was some time in OpenWrt. Signed-off-by: Bernhard Loos <bernhardloos@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: extract indexes for power tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-22ssb: b43-pci-bridge: Add new vendor for BCM4318Daniel Klaffenbach
Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18ssb: drop BCM4328 hack for SPROM revisionRafał Miłecki
This hacks leads to incorrect SPROM parsing for me and reading for example MAC as: 00:00:00:54:00:00. Michael G. who introduced this confirmed it is not needed anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Michael Gerdau <mgd@qata.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: return -ENOMEM on alloc fail (instead of CRC check's result)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: workarounds: be verbose about hacking SPROM revision, don't duplicate codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ssb: Clear RETRY_TIMEOUT in PCI Configuration for normal devicesLarry Finger
MMIO log traces obtained using the Broadcom wl hybrid driver show that the RETRY_TIMEOUT register (0x41) in PCI configuration space is cleared if non-zero. Similar code found in other drivers such as ipw2100 show this operation is needed to keep PCI Tx retries from interfering with C3 CPU state. There are no known cases where omission of this code has caused a problem, but this patch is offered just in case such a situation occurs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-29pcmcia: convert pcmcia_request_configuration to pcmcia_enable_deviceDominik Brodowski
pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq pcmcia: do not request windows if you don't need to pcmcia: insert PCMCIA device resources into resource tree pcmcia: export resource information to sysfs pcmcia: use struct resource for PCMCIA devices, part 2 pcmcia: remove memreq_t pcmcia: move local definitions out of include/pcmcia/cs.h pcmcia: do not use io_req_t when calling pcmcia_request_io() pcmcia: do not use io_req_t after call to pcmcia_request_io() pcmcia: use struct resource for PCMCIA devices pcmcia: clean up cs.h pcmcia: use pcmica_{read,write}_config_byte pcmcia: remove cs_types.h pcmcia: remove unused flag, simplify headers pcmcia: remove obsolete CS_EVENT_ definitions pcmcia: split up central event handler pcmcia: simplify event callback pcmcia: remove obsolete ioctl Conflicts in: - drivers/staging/comedi/drivers/* - drivers/staging/wlags49_h2/wl_cs.c due to dev_info_t and whitespace changes
2010-08-03pcmcia: use pcmica_{read,write}_config_byteDominik Brodowski
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30pcmcia: remove cs_types.hDominik Brodowski
Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-04ssb: remove the ssb DMA APIFUJITA Tomonori
Now they are unnecessary. We can use the generic DMA API with any bus. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Michael Buesch <mb@bu3sch.de> Cc: Gary Zambrano <zambrano@broadcom.com> Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ssb: add dma_dev to ssb_device structureFUJITA Tomonori
Add dma_dev, a pointer to struct device, to struct ssb_device. We pass it to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. ssb_devices_register() sets up it properly. This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*) with the generic DMA API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Michael Buesch <mb@bu3sch.de> Cc: Gary Zambrano <zambrano@broadcom.com> Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ssb: Handle alternate SSPROM locationLarry Finger
In kernel Bugzilla #15825 (2 users), in a wireless mailing list thread (http://lists.infradead.org/pipermail/b43-dev/2010-May/000124.html), and on a netbook owned by John Linville (http://marc.info/?l=linux-wireless&m=127230751408818&w=4), there are reports of ssb failing to detect an SPROM at the normal location. After studying the MMIO trace dump for the Broadcom wl driver, it was determined that the affected boxes had a relocated SPROM. This patch fixes all systems that have reported this problem. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ssb: fast powerup delay calculation for PMU capable devicesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ssb: update PMU init to match specsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28ssb: fix NULL ptr deref when pcihost_wrapper is usedChristoph Fritz
Ethernet driver b44 does register ssb by it's pcihost_wrapper and doesn't set ssb_chipcommon. A check on this value introduced with commit d53cdbb94a52a920d5420ed64d986c3523a56743 and ea2db495f92ad2cf3301623e60cb95b4062bc484 triggers: BUG: unable to handle kernel NULL pointer dereference at 00000010 IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30 Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
2010-04-26ssb: Make bus registration failure not be silentLarry Finger
In kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register() fails silently is reported. The cause for the failure is still being investigated; however, the diagnosis would be easier if the failure had been reported. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 16:03:35 +0000