| Age | Commit message (Collapse) | Author |
|---|
|
mmap() doesn't work as expected for UIO_MEM_LOGICAL or UIO_MEM_VIRTUAL
mappings. The offset into the memory needs to be added, otherwise
uio_vma_fault always returns the first page only. Note that for UIO
userspace calls mmap() with offset = N * getpagesize() to access
mapping N. This must be compensated when calculating the offset. A
comment was added to explain this since it is not obvious.
Signed-off-by: Andrew G. Harvey <agh@cisco.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Here is a new version of the patch to support the Automata Sercos III
PCI card driver. I now check that the IRQ is enabled before accepting
the interrupt.
I still use a logical OR to store the enabled interrupts and I've
added a second use of a logical OR when restoring the enabled
interrupts. I added an explanation of why I do this in comments at the
top of the source file.
Since I use a logical OR, I also removed the extra checks if the
Interrupt Enable Register and ier0_cache are 0.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The generic UIO platform device driver should be given a unique driver ID and
not just "uio". This is especially important since we now have a similar driver
named uio_pdrv_genirq. Currently, there's no user of this driver in the
mainline kernel.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch adds an "offset" attribute for UIO mappings. It shows the
difference between the actual start address of the memory and the start
address of the page.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Now that device_create() has been audited, rename things back to the
original call to be sane.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with
generic IRQ handling code. This driver is very similar to the regular
UIO platform driver, but is only suitable for devices that are
connected to the interrupt controller using unique interrupt lines.
The uio_pdrv_genirq driver includes generic interrupt handling code
which disables the serviced interrupt in the interrupt controller
and makes the user space driver responsible for acknowledging the
interrupt in the device and reenabling the interrupt in the interrupt
controller.
Shared interrupts are not supported since the in-kernel interrupt
handler will disable the interrupt line in the interrupt controller,
and in a shared interrupt configuration this will stop other devices
from delivering interrupts.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Thanks to Magnus Damm for pointing that out.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Thanks to Magnus Damm for pointing that out.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch adds a generic UIO platform driver. It eliminates the need for a
dedicated kernel module for simple platform devices. Users only need to
implement their irq handler in platform code and fill a struct uio_info
there. This helps avoiding code duplication as UIO platform drivers often
share a lot of common code.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Sometimes it is necessary to enable/disable the interrupt of a UIO device
from the userspace part of the driver. With this patch, the UIO kernel driver
can implement an "irqcontrol()" function that does this. Userspace can write
an s32 value to /dev/uioX (usually 0 or 1 to turn the irq off or on). The
UIO core will then call the driver's irqcontrol function.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
ae210f188614bb3d1ee3f19c64e28e3cdd44877c introduced a big "if UIO"/"endif"
where all uio drivers are defined. So know there is no need for them to
depend explicitly on UIO.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
|
|
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There is a race from when a device is created with device_create() and
then the drvdata is set with a call to dev_set_drvdata() in which a
sysfs file could be open, yet the drvdata will be NULL, causing all
sorts of bad things to happen.
This patch fixes the problem by using the new function,
device_create_drvdata().
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Otherwise the device might just disappear while /dev/uioX is being used
which results in an Oops.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch implements a UIO interface for the SMX Cryptengine.
The Cryptengine found on the Nias Digital SMX board is best suited
for a UIO interface. It is not wired in to the cryptographic API
as the engine handles it's own keys, algorithms, everything. All
that we know about is that if there's room in the buffer, you can
write data to it and when there's data ready, you read it out again.
There isn't necessarily even any direct correlation between data
going in and data coming out again, the engine may consume or
generate data all on its own.
This driver is for proprietary hardware but we're always told to
submit the drivers anyway; here you are. :-)
This is version 4 of this patch and addresses all issues raised by
Hans-Jürgen Koch and Paul Mundt in their reviews. Slightly altered
is Paul's suggestion to use DRV_NAME and DRV_VERSION as the UIO
version and name. While at the moment they are the same, there
is no reason for them to stay that way. Nevertheless we now at
least provide a MODULE_VERSION macro to keep modinfo happy.
Signed-off-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Meanwhile, PCI_DEVICE_ID_PLX_9030 is defined in pci_ids.h, no need to
define it again in the driver.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
CC: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Mapping of physical memory in UIO needs pgprot_noncached() to ensure
that IO memory is not cached. Without pgprot_noncached(), it (accidentally)
works on x86 and arm, but fails on PPC.
Signed-off-by: Jean-Samuel Chenard <jsamch@gmail.com>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This fixes two bugs with UIO that cropped up recently in -rc1
1) WARNING: at fs/sysfs/file.c:334 sysfs_open_file when trying to open
a map addr/size file - complaining about missing sysfs_ops for ktype
2) Permission denied when reading uio/uio0/maps/map0/{addr,size} when
files are mode S_IRUGO
Also fix a typo: attr_attribute -> addr_attribute
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Convert uio from nopage to fault.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Now that the old kobject_init() function is gone, rename
kobject_init_ng() to kobject_init() to clean up the namespace.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Now that the old kobject_add() function is gone, rename kobject_add_ng()
to kobject_add() to clean up the namespace.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The uio kobject code is "wierd". This patch should hopefully fix it up
to be sane and not leak memory anymore.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We don't need a "default" ktype for a kset. We should set this
explicitly every time for each kset. This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.
This patch is based on a lot of help from Kay Sievers.
Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
this is a patch that adds support for Hilscher CIF DeviceNet and
Profibus cards. I tested it on a Kontron CPX board, and Thomas reviewed
it.
You can find the user space part here:
http://www.osadl.org/projects/downloads/UIO/user/cif-0.1.0.tar.gz
Notes: cif_api.c is the main file you want to look at. It contains the
functions to open, close, mmap and so on. cif_dps.c adds functions
specific to Profibus cards, and cif_dn.c contains functions for
DeviceNet cards. cif.c is a universal playground, it's just a small
test program. The user space part of this UIO driver is still work in
progress, and not everything is tested yet. At the moment, the thread in
cif_api.c contains some code that artificially makes the card generate
interrupts, this was added for testing and will be removed later. But
the driver already contains all the functions needed for useful
operation, so it gives a good idea of how such a thing looks like.
For comparison, here's what you get from the manufacturer
(www.hilscher.com) when you ask for a Linux 2.6 driver:
http://www.tglx.de/private/hjk/cif-orig-2.6.tar.bz2
WARNING: Don't look at the code for too long, you might become sick :-)
Signed-off-by: Hans-Jürgen Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This interface allows the ability to write the majority of a driver in
userspace with only a very small shell of a driver in the kernel itself.
It uses a char device and sysfs to interact with a userspace process to
process interrupts and control memory accesses.
See the docbook documentation for more details on how to use this
interface.
From: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
