summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/host.c
AgeCommit message (Collapse)Author
2015-01-09Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start"Peter Chen
This reverts commit 14b4099c074f2ddf4d84b22d370170e61b527529 It moved platform_set_drvdata(pdev, ci) before hcd is created, and the hcd will assign itself as ci controller's drvdata during the hcd creation function (in usb_create_shared_hcd), so it overwrites the real ci's drvdata which we want to use. So, if the controller is at host mode, the system suspend API will get the wrong struct ci_hdrc pointer, and cause the oops. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26usb: chipidea: remove duplicate dev_set_drvdata for host_startPeter Chen
The core driver has already done it, besides, move set driver data operation just after ci has allocated successfully in case some code (like ci_role_start) want to access this driver data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25Merge tag 'usb-for-v3.19' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.19 merge window This time, a very pull request with 216 non-merge commits. Most of the commits contained here are sparse or coccinelle fixes ranging from missing 'static' to returning 0 in case of errors. More importantly, we have the removal the now unnecessary 'driver' argument to ->udc_stop(). DWC2 learned about Dual-Role builds. Users of this IP can now have a single driver built for host and device roles. DWC3 got support for two new HW platforms: Exynos7 and AMD. The Broadcom USB 3.0 Device Controller IP is now supported and so is PLX USB338x, which means DWC3 has lost is badge as the only USB 3.0 peripheral IP supported on Linux. Thanks for Tony Lindgren's work, we can now have a distro-like kernel where all MUSB glue layers can be built into the same kernel (statically or dynamically linked) and it'll work in PIO (DMA will come probably on v3.20). Other than these, the usual set of cleanups and non-critical fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: chipidea: host: add portpower overrideMichael Grzeschik
This patch adds an external portpower override callback, only single port regulator control is supported now. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03usb: chipidea: add support to the generic PHY frameworkAntoine Tenart
This patch adds support of the PHY framework for ChipIdea drivers. Changes are done in both the ChipIdea common code and in the drivers accessing the PHY. This is done by adding a new PHY member in ChipIdea's structures and by taking care of it in the code. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: allow to supply the PHY in the drivers when using HCDAntoine Tenart
This patch modify the generic code handling PHYs to allow them to be supplied from the drivers. This adds checks to ensure no PHY was already there when looking for one in the generic code. This also makes sure we do not modify its state in the generic HCD functions, it was provided by the driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-29usb: rename phy to usb_phy in HCDAntoine Tenart
The USB PHY member of the HCD structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. This is in preparation to adding the generic PHY support. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> [Sergei: added missing 'drivers/usb/misc/lvstest.c' file, resolved rejects, updated changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: chipidea: add TPL support for targeted hostsPeter Chen
For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List) for usb certification and other vender specific requirements, the platform can tell chipidea core driver if it supports tpl through DT or platform data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: host: init otg port numberLi Jun
Init otg_port number of otg capable host to be 1 at host start. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: host: vbus control change for OTG HNPLi Jun
Leave vbus on/off hanlded by OTG fsm if in OTG mode. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13usb: chipidea: add freescale imx28 special write register methodPeter Chen
According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB register error issue", All USB register write operations must use the ARM SWP instruction. So, we implement special hw_write and hw_test_and_clear for imx28. Discussion for it at below: http://marc.info/?l=linux-usb&m=137996395529294&w=2 This patch is needed for stable tree 3.11+. Cc: stable@vger.kernel.org Cc: robert.hodaszi@digi.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-03usb: chipidea: host: Only disable the vbus regulator if it is not NULLFabio Estevam
Commit 40ed51a4b (usb: chipidea: host: add vbus regulator control) introduced a smatch complaint because regulator_disable() is called without checking whether ci->platdata->reg_vbus is not NULL. Fix this by adding the check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: chipidea: host: more enhancement when ci->hcd is NULLPeter Chen
Like http://marc.info/?l=linux-usb&m=138200449428874&w=2 said: two more things are needed to be done: - If host_start fails, the host_stop should not be called, so we add check that ci->hcd is not NULL. - if the host_start fails at the beginning, we need to consider regulator mismatch issue. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16usb/chipidea: fix oops on memory allocation failureRussell King - ARM Linux
When CMA fails to initialize in v3.12-rc4, the chipidea driver oopses the kernel while trying to remove and put the HCD which doesn't exist: WARNING: CPU: 0 PID: 6 at /home/rmk/git/linux-rmk/arch/arm/mm/dma-mapping.c:511 __dma_alloc+0x200/0x240() coherent pool not initialised! Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func Backtrace: [<c001218c>] (dump_backtrace+0x0/0x10c) from [<c0012328>] (show_stack+0x18/0x1c) r6:c05fd9cc r5:000001ff r4:00000000 r3:df86ad00 [<c0012310>] (show_stack+0x0/0x1c) from [<c05f3a4c>] (dump_stack+0x70/0x8c) [<c05f39dc>] (dump_stack+0x0/0x8c) from [<c00230a8>] (warn_slowpath_common+0x6c/0x8c) r4:df883a60 r3:df86ad00 [<c002303c>] (warn_slowpath_common+0x0/0x8c) from [<c002316c>] (warn_slowpath_fmt+0x38/0x40) r8:ffffffff r7:00001000 r6:c083b808 r5:00000000 r4:df2efe80 [<c0023134>] (warn_slowpath_fmt+0x0/0x40) from [<c00196bc>] (__dma_alloc+0x200/0x240) r3:00000000 r2:c05fda00 [<c00194bc>] (__dma_alloc+0x0/0x240) from [<c001982c>] (arm_dma_alloc+0x88/0xa0) [<c00197a4>] (arm_dma_alloc+0x0/0xa0) from [<c03e2904>] (ehci_setup+0x1f4/0x438) [<c03e2710>] (ehci_setup+0x0/0x438) from [<c03cbd60>] (usb_add_hcd+0x18c/0x664) [<c03cbbd4>] (usb_add_hcd+0x0/0x664) from [<c03e89f4>] (host_start+0xf0/0x180) [<c03e8904>] (host_start+0x0/0x180) from [<c03e7c34>] (ci_hdrc_probe+0x360/0x670 ) r6:df2ef410 r5:00000000 r4:df2c3010 r3:c03e8904 [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) ... ---[ end trace c88ccaf3969e8422 ]--- Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = c0004000 [00000028] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func task: df86ad00 ti: df882000 task.ti: df882000 PC is at usb_remove_hcd+0x10/0x150 LR is at host_stop+0x1c/0x3c pc : [<c03cacec>] lr : [<c03e88e4>] psr: 60000013 sp : df883b50 ip : df883b78 fp : df883b74 r10: c11f4c54 r9 : c0836450 r8 : df30c400 r7 : fffffff4 r6 : df2ef410 r5 : 00000000 r4 : df2c3010 r3 : 00000000 r2 : 00000000 r1 : df86b0a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 2f29404a DAC: 00000015 Process kworker/u2:0 (pid: 6, stack limit = 0xdf882240) Stack: (0xdf883b50 to 0xdf884000) ... Backtrace: [<c03cacdc>] (usb_remove_hcd+0x0/0x150) from [<c03e88e4>] (host_stop+0x1c/0x3c) r6:df2ef410 r5:00000000 r4:df2c3010 [<c03e88c8>] (host_stop+0x0/0x3c) from [<c03e8aa0>] (ci_hdrc_host_destroy+0x1c/0x20) r5:00000000 r4:df2c3010 [<c03e8a84>] (ci_hdrc_host_destroy+0x0/0x20) from [<c03e7c80>] (ci_hdrc_probe+0x3ac/0x670) [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) [<c030fc10>] (driver_probe_device+0x0/0x234) from [<c030ff28>] (__device_attach+0x44/0x48) ... ---[ end trace c88ccaf3969e8423 ]--- Fix this so at least we can continue booting and get to a shell prompt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: add role init and destroy APIsPeter Chen
- The role's init will be called at probe procedure. - The role's destroy will be called at fail patch at probe and driver's removal. - The role's start/stop will be called when specific role has started. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: host: add vbus regulator controlPeter Chen
For boards which have board level vbus control (eg, through gpio), we need to vbus operation according to below rules: - For host, we need open vbus before start hcd, and close it after remove hcd. - For otg, the vbus needs to be on/off when usb role switches. When the host roles begins, it opens vbus; when the host role finishes, it closes vbus. We put vbus operation to host as host is the only vbus user, When we are at host mode, the vbus is on, when we are not at host mode, vbus should be off. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: host: add has_tdi_phy_lpm capability bitTuomas Tynkkynen
The has_hostpc capability bit indicates that the host controller has the HOSTPC register extensions, but at the same time enables clock disabling power saving features with the PHY Low Power Clock Disable (PHCD) bit. However, some host controllers have the HOSTPC extensions but don't support the low-power feature, so the PHCD bit must not be set on those controllers. Add a separate capability bit for the low-power feature instead, and change all existing users of has_hostpc to use this new capability bit. The idea for this commit is taken from an old 2012 commit that never got merged ("disociate chipidea PHY low power suspend control from hostpc") Inspired-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-24usb: chipidea: drop "13xxx" infixAlexander Shishkin
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: chipidea: Allow disabling streaming not only in udc modeFabio Estevam
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11USB: EHCI: miscellaneous cleanups for the library conversionAlan Stern
This patch (as1630) cleans up a few minor items resulting from the split-up of the ehci-hcd driver: Remove the product_desc string from the ehci_driver_overrides structure. All drivers will use the generic "EHCI Host Controller" string. (This was requested by Felipe Balbi.) Allow drivers to pass a NULL pointer to ehci_init_driver() if they don't have to override any settings. Remove a #define symbol that is no longer used from the ChipIdea host driver. Rename overrides to pci_overrides in ehci-pci.c, for consistency with ehci-platform.c. Mark the *_overrides structures as __initdata. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-03USB: EHCI: fix build error in ChipIdea host driverAlan Stern
This patch (as1629) fixes a build error in the ChipIdea host driver when compiled for the ARM architecture. The error was introduced by commit 99f91934a907df31ba878dfdd090002049dc476a (USB: EHCI: make ehci-platform a separate driver). The fix is simple; an additional header-file #include is needed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-02USB: EHCI: fix build error by making ChipIdea host a normal EHCI driverAlan Stern
This patch (as1627) splits the ehci-hcd core code, which has become a separate library module, out from the ChipIdea host driver. Instead of #include-ing ehci-hcd.c directly, the ChipIdea module will now use the ehci-hcd library in a normal fashion. This fixes a build error caused by commit 3e0232039967d7a1a06c013d097458b4d5892af1 (USB: EHCI: prepare to make ehci-hcd a library module); I had forgotten about the unorthodox way the ChipIdea driver uses the ehci-hcd code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: EHCI: remove ehci_port_power() routineAlan Stern
This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09usb: chipidea: permit driver bindings pass phy pointerRichard Zhao
Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-06USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_dataRichard Zhao
This patch rename struct ci13xxx_udc_driver and var with the type. ci13xxx_platform_data reflect it's passed from platfrom driver. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15USB: CI13xxx: Use usb_put_hcd() on failure to drop HCDMarek Vasut
Use usb_put_hcd() call instead of usb_remove_hcd() as that's the appropriate call to drop hcd which failed registration. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add power_budget limit for ehci to platform dataAlexander Shishkin
Some implementations need this limitation to work correctly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add host roleAlexander Shishkin
This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>