summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/Kconfig
AgeCommit message (Collapse)Author
2010-05-20USB: fix functionfs for CONFIG_NET disabledRandy Dunlap
Fix functionfs build to handle CONFIG_NET not enabled, to prevent these build errors: ERROR: "netif_carrier_on" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "netif_carrier_off" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_realloc_headroom" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_trim" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "netif_rx" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "alloc_etherdev_mq" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "ethtool_op_get_link" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "free_netdev" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "register_netdev" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_push" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_pull" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_queue_tail" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "__alloc_skb" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "eth_type_trans" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "eth_validate_addr" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_dequeue" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "unregister_netdev" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "__netif_schedule" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "skb_put" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "eth_mac_addr" [drivers/usb/gadget/g_ffs.ko] undefined! ERROR: "dev_get_stats" [drivers/usb/gadget/g_ffs.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: g_ffs: the FunctionFS gadget driverMichal Nazarewicz
The Function Filesystem (FunctioFS) lets one create USB composite functions in user space in the same way as GadgetFS lets one create USB gadgets in user space. This allows creation of composite gadgets such that some of the functions are implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: gadget webcam: depends on VIDEO_DEVRandy Dunlap
g_webcam uses v4l[2] interfaces, so it should depend on VIDEO_DEV. ERROR: "v4l2_event_unsubscribe" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_event_queue" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_device_release" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_usercopy" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_event_dequeue" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_register_device" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_device_alloc" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_event_subscribe" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_unregister_device" [drivers/usb/gadget/g_webcam.ko] ndefined! ERROR: "v4l2_event_pending" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_fh_init" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_event_init" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "video_devdata" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_event_alloc" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_fh_add" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_fh_del" [drivers/usb/gadget/g_webcam.ko] undefined! ERROR: "v4l2_fh_exit" [drivers/usb/gadget/g_webcam.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB gadget: Webcam deviceLaurent Pinchart
This webcam gadget instantiates a UVC camera (360p and 720p resolutions in YUYV and MJPEG). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: gadget: add HID gadget driverFabien Chouteau
g_hid is a USB gadget driver implementing the Human Interface Device class specification. The driver handles basic HID protocol handling in the kernel, and allows userspace to read/write HID reports trough /dev/hidgX character devices. Signed-off-by: Fabien Chouteau <fabien.chouteau@barco.com> Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: g_mass_storage: fixed module name in KconfigMichal Nazarewicz
The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: gadget: introduce g_nokia gadget driverFelipe Balbi
g_nokia is the gadget driver implementing WMCDC Wireless Handset Control Model for the N900 device. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: g_multi kconfig: fix depends and help textRandy Dunlap
USB_G_MULTI uses block and net interface functions, so make it depend on both of those. Otherwise there are lots of build errors. Fix USB_G_MULTI config help text typos and copy/paste error. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: g_multi: Multifunction Composite Gadget addedMichal Nazarewicz
The Multifunction Composite Gadget has two configurations consisting of Ethernet (RNDIS in first and CDC Ethernet in second configuration), CDC Serial and File-backed Storage functions. When connected to a Windows host, the first configuration is chosen thus gadget provides RNDIS Ethernet, serial and mass storage whereas when connected to Linux host, second configuration is chosen thus providing CDC Ethernet, serial and mass storage. Which configurations are built can be configured via KConfig options. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: g_mass_storage: Mass Storage Function createdMichal Nazarewicz
The f_mass_storage.c has been changed into a composite function. mass_storage.c file has been introduced which defines a g_mass_storage gadget based on composite framework. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-21ARM: Fix lubbock defconfig buildRussell King
drivers/built-in.o: In function `pxa25x_udc_probe': drivers/usb/gadget/pxa25x_udc.c:2195: undefined reference to `otg_get_transceiver' drivers/usb/gadget/pxa25x_udc.c:2300: undefined reference to `otg_put_transceiver' pxa25x_udc.c unconditionally uses these two functions, so we need to ensure that the object providing them is also built. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-23USB: gadget: ether needs to select CRC32Randy Dunlap
Fix build error, ether uses/needs to select CRC32 config symbol: ether.c:(.text+0x271480): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: gadget: Add EEM gadget driverBrian Niebuhr
This patch adds a CDC EEM ethernet gadget driver. CDC EEM is a newer USB ethernet specification that uses a simpler interface than the older CDC ECM. This makes CDC EEM usable by a wider set of USB hardware. By default the ethernet gadget will still use CDC ECM/Subset, but kernel configuration and/or a module parameter will allow alternative use of the CDC EEM protocol. Changes since last version: - Brought in missing RNDIS changes that caused compile error - Modified 'sentinel CRC' checking to match EEM host driver Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: at91: Add USB gadget driver selection for at91sam9g45 seriesNicolas Ferre
Add gadget USB drivers for at91sam9g45 series. Those SOC include high speed USB interfaces. The gadget driver is the already available atmel_usba_udc. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-20usb: gadget: R8A66597 peripheral controller support.Yoshihiro Shimoda
While in-tree support for the R8A66597 host side has been supported for some time, the peripheral side has so far been unsupported. This adds a new USB gadget driver which bridges the gap and finally wires up the peripheral side as well. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23usb: m66592-udc platform data on_chip supportMagnus Damm
Convert the m66592-udc driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness. This makes the code cleaner and also allows us to support both external and internal m66592 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip m66592 without modifying the Kconfig. The patch adds a m66592 header file for platform data and ties in platform data to the existing m66592 devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12USB: gadget audio: select SND_PCMRandy Dunlap
Fix USB gadget audio: select SND_PCM, like many other sound drivers do, to fix build errors: drivers/built-in.o: In function `f_audio_playback_work': audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl' audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write' drivers/built-in.o: In function `_snd_pcm_hw_param_set': audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: gadget: fix imx_udc entry in KconfigPaulius Zaleckas
Move USB_GADGET_IMX to the right section of Kconfig as this controller is available only as integrated on i.MX CPU. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add Intel Langwell USB Device Controller driverXiaochen Shen
Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: gadget: add USB Audio Gadget driverBryan Wu
Funtions added: - setup all the USB audio class device descriptors - handle class specific setup request - receive data from USB host by ISO transfer - play audio data by ALSA sound card - open and setup playback PCM interface - set default playback PCM parameters - provide playback functions for USB audio driver - provide PCM parameters set/get functions Test on: - Host: Ubuntu 8.10, kernel 2.6.27 - Gadget: EZKIT-BF548 with ASoC AD1980 codec Todo: - add real Mute control code - add real Volume control code - maybe find another way to replace dynamic buffer handling with static buffer allocation - test on Windows system - provide control interface to handle mute/volume control - provide capture interface in the future - test on BF527, other USB device controler and other audio codec Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Gadget driver for Samsung HS/OtG blockBen Dooks
Driver support for the new high-speed/OtG block that is in the newer line of Samsung SoC devices such as the S3C64XX series. This driver does not currntly have DMA support enabled due to issues with buffer alignment which need to be sorted out. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: gadget: Add i.MX3x support to the fsl_usb2_udc driverGuennadi Liakhovetski
This patch adds support for i.MX3x (only tested with i.MX31 so far) ARM SoCs to the fsl_usb2_udc driver. It also moves PHY configuration before controller reset, because otherwise an ULPI PHY doesn't get a reset and doesn't function after a reboot. The problem with longer control transfers is still not fixed. The patch renames the fsl_usb2_udc.c file to fsl_udc_core.c to preserve the same module name for user-space backwards compatibility. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: pxa27x_udc: compatibility with pxa320 SoCRobert Jarzmik
Got pxa27x_udc working on the pxa320 Nomad platform. The problem was that the pxa3xx UDC is not quite compatible with the pxa27x UDC in how it handles back-to-back control packets. The pxa27x probably drops them by default, but the pxa320 does not, and you have to detect it and set the OPC bit to clear the zero-length packet. Signed-off-by: Aric Blumer <aric@sdgsystems.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-24USB: pxa27x_udc: add otg transceiver supportRobert Jarzmik
When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27USB: gadget: fix build error in omap_apollon_2420_defconfigDavid Brownell
In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: add imx udc gadget driverDarius Augulis
Implementation of USB device driver integrated in Freescale's i.MXL processor. Adds USB device driver for i.MXL. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: musb: add Blackfin Kconfig options and MakefileBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: gadget: MIPS ci13xxx_udcDavid Lopo
MIPS USB IP core family device controller Currently it only supports IP part number CI13412. [dbrownell@users.sourceforge.net: minor comment tweaks] Signed-off-by: David Lopo <dlopo@chipidea.mips.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: omap_udc: sync with OMAP treeTony Lindgren
Sync up USB parts of the omap_udc support in mainline with the OMAP tree. This patch addresses some OMAP2 differences ... there's another, with respect to the double-buffering issue with PIO-IN in omap_ep_setup() (which is now out of sync with the comments), but it's not clear right now how to address that. From: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb gadget: USB_GADGET_VBUS_DRAW Kconfig optionDavid Brownell
Offer a "how much VBUS power to request" configuration option for USB gadgets that aren't using board-specific customization of their gadget or (composite) configuration drivers. Also remove a couple pointless "depends on USB_GADGET" bits from the Kconfig text; booleans inside an "if USB_GADGET" will already have that dependency. Based on a patch from Justin Clacherty. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Justin Clacherty <justin@redfish-group.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb: add Freescale QE/CPM USB peripheral controller driverLi Yang
Some of Freescale SoC chips have a QE or CPM co-processor which supports full speed USB. The driver adds device mode support of both QE and CPM USB controller to Linux USB gadget. The driver is tested with MPC8360 and MPC8272, and should work with other models having QE/CPM given minor tweaks. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb gadget: cdc obex glueFelipe Balbi
The following patch introduces a new f_obex.c function driver. It allows userspace obex servers to use usb as transport layer for their messages. [ dbrownell@users.sourceforge.net: various fixes and cleanups ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb: gadget Kconfig cleanupDavid Brownell
This reorders the list of USB peripheral controller drivers so it's more common for the initial (default) value to be relevant: put the SOC integrated silicon up front, discrete stuff last. Alphabetize. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: Add MUSB and TUSB supportFelipe Balbi
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21usb gadget: g_cdc dependso on NETRandy Dunlap
g_cdc needs to depend on NET, otherwise net-related build errors happen: ERROR: "netif_carrier_on" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_carrier_off" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_rx" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "alloc_etherdev_mq" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "free_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "register_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "print_mac" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__alloc_skb" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "eth_type_trans" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "unregister_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__netif_schedule" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "skb_put" [drivers/usb/gadget/g_cdc.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21usb gadget: new "CDC Composite" gadget driverDavid Brownell
This is a simple example of a composite gadget, combining two Communications Class Device (CDC) functions: ECM and ACM. This provides a clear example of how the composite gadget framework is intended to work. It's surprising that MS-Windows (or at least, XP and previous) won't "just work" with something this simple... One /proc/bus/usb/devices listing looks like: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0525 ProdID=a4aa Rev= 3.01 S: Manufacturer=Linux 2.6.26-rc6-pnut with net2280 S: Product=CDC Composite Gadget C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Not all USB peripheral controller hardware can support this driver. All the highspeed-capable peripheral controllers with drivers now in the mainline kernel seem to support this, as does omap_udc. But many full speed controllers don't have enough endpoints, or (as with the PXA controllers) don't support altsettings. Lightly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-14[ARM] Merge most of the PXA work for initial mergeRussell King
This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-09[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel
drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 4940/1: AT91: UDPHS driver: SAM9RL board and cpu integration.Nicolas Ferre
Adds support for the USB High Speed Device Port on the AT91SAM9RL system on chip. The AT91SAM9RL uses the same UDPHS IP as the AVR32 and the AT91CAP9 (atmel_usba_udc driver). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-02usb: pxa27x_udc driverRobert Jarzmik
Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: Remove EXPERIMENTAL tags from some USB gadget Kconfig entries.Robert P. J. Day
Based on a recent discussion on the Linux USB mailing list, remove the designation of EXPERIMENTAL from some USB gadget entries, and tag some of them as DEVELOPMENT. just for fun, i added a bit of help for gadgetfs, explaining the race condition. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2008-04-06atmel_usba_udc: Add support for AT91CAP9 UDPHSStelian Pop
This patch is part of the series adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. The only differences between the AVR32 and the AT91 version of the device are in the enable/disable and suspend/wakeup sequences: the AT91 version needs to toggle the USB bias and pulldown explicitly. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-03-10USB: fsl_usb2_udc: fix broken KconfigLi Yang
The patch fixes broken Kconfig caused by the name change of MPC834x option. It also makes fsl_usb2_udc selectable on new platforms like MPC837x. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Use menuconfig objectsDenis Cheng
commit 04d06ad0f1fdb499af84ae3d7969e2136a462f38 have added menuconfig support for the whole USB Kconfig, but there are still menuconfig need for usb/serial, usb/atm, and usb/gadget, so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add Printer Gadget DriverCraig W. Nadler
G_PRINTER: Adds a USB printer gadget driver for use in printer firmware. This adds a USB printer gadget driver for use in printer firmware. The printer gadget channels data between the USB host and a userspace program driving the print engine. The user space program reads and writes the device file /dev/g_printer to receive or send printer data. It can use ioctl calls to the device file to get or set printer status. Signed-off-by: Craig W. Nadler <craig@nadler.us> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: m66592-udc: Add support for SH7722 USBFYoshihiro Shimoda
Add support for SuperH SH7722 USB Function. M66592 is similar to SH7722 USBF. It can support SH7722 USBF by changing several M66592 code. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26[ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12USB: add atmel_usba_udc driverHaavard Skinnemoen
This is a driver for the Atmel USBA UDC which can be found integrated on AT32AP700x AVR32 processors. For hardware documentation, please see the AT32AP7000 data sheet: http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf This is a dual speed controller (connects at high or full speed). The driver supports up to 7 control, bulk, interrupt and isochronous endpoints with some constraints. Bulk, interrupt and isochronous transfers are driven by DMA. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: m66592-udc: fixes some problemsYoshihiro Shimoda
This patch incorporates some updates from the review of the Renesas m66592-udc driver. Updates include: - Fix some locking bugs; and add a few sparse annotations - Don't #define __iomem ! - Lots of whitespace fixes (most of the patch by volume) - Some #include file trimmage - Other checkpatch.pl and sparse updates - Alphabetized and slightly-more-informative Kconfig - Don't use the ID which was assigned to the amd5536udc driver. - Remove pointless suspend/resume methods updating obsolete field. - Some section fixups - Fix some leak bugs - Fix byteswapping Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 13:56:53 +0000