summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-11USB: fix serial gadget ACM breakageDavid Brownell
Two of the CDC ACM control requests in the serial gadget have never been correct, and have been reported to cause serious troubles ... as in, soft lockup and maybe watchdog reset (depending on hardware). This patch makes those request fail cleanly, rather than misbehaving. Someone using CDC ACM should fix them according to the FIXME comments which now replace the previous bugs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: fsl_usb2_udc: fix bug in processing setup requestsLi Yang
Kim Liu found that in the original code certain class setup requests are wrongly recognized and processed as standard setup requests. For that reason gadget ether can't work in RNDIS mode with Windows host. The patch fixes the setup request processing code, and makes class requests correctly passed to gadget layer. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Liu <KLiu@vixs.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: g_file_storage: fix bug in DMA buffer handlingAlan Stern
This patch (as963) fixes a recently-introduced bug. The gadget conversion removing DMA-mapped buffer allocation did not remove quite enough code from the g_file_storage driver; DMA pointers were being set to 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: remove DEBUG definition from dummy_hcdAlan Stern
This patch (as958) removes an unneeded and unwanted #define line from dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Stall control endpoint when file storage class request wValue != 0Luis Lloret
This patch makes the File Storage Gadget stall the control endpoint when a MSC class request is made with wValue != 0. This change makes some MSC compliance test warnings disappear. Signed-off-by: Luis Lloret <luislloret@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: px2xx_udc bugfix, missing check for gpio_pullupDavid Brownell
git commit b2bbb20b37d734443d1c279d0033a64f6095db54 added direct support for PXA GPIO D+ pullup as alternative to the older udc_command ops method. This was done by introduction of the pxa2xx_udc_mach_info member "gpio_pullup" which, if initialized, is now used in (almost) all places where udc_command used to be called. This patch fixes two places where checks for availability of D+ pullup control still only honor udc_command. Signed-off-by: Uli Luckas <u.luckas@road.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: "sparse" cleanups for usb gadgetsDavid Brownell
This removes complaints about the gadget stack which are generated by the currrent "sparse": it doesn't like the fact that zero is the null pointer. (Last I checked, C guarantees that's correct ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: more pxa2xx_udc dead code removalDavid Brownell
Remove some more dead code from the pxa2xx_udc driver: support for a no-longer-undocumented hardware "test mode". Newer chips made this the default, evidently as the best workaround for deep silicon bugs. The interest was that this seemed to be the only way to kick in the (documented!) double buffering capability. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: m66592-udc: fixes some problemsYoshihiro Shimoda
This patch incorporates some updates from the review of the Renesas m66592-udc driver. Updates include: - Fix some locking bugs; and add a few sparse annotations - Don't #define __iomem ! - Lots of whitespace fixes (most of the patch by volume) - Some #include file trimmage - Other checkpatch.pl and sparse updates - Alphabetized and slightly-more-informative Kconfig - Don't use the ID which was assigned to the amd5536udc driver. - Remove pointless suspend/resume methods updating obsolete field. - Some section fixups - Fix some leak bugs - Fix byteswapping Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: amd5536 UDC driver (in GEODE southbridge)Thomas Dahlmann
Driver for the AMD5536 UDC, as found in the AMD Geode CS5536 (southbridge). This is a high speed DMA-capable controller, which can also be used in OTG configurations (which are not supported by this patch). Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: use mutex instead of semaphore in the USB gadget serial driverMatthias Kaehlcke
The USB gadget serial driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15minimal fixes for drivers/usb/gadget/m66592-udc.cAl Viro
still looks racy (and definitely leaks) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12USB: goku_udc trivial cleanupsDavid Brownell
Minor fixes to goku_udc ... whitespace, let -DDEBUG do its thing, check the return value of device_register(), sparse tweaks. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: usb gadget stack can now -DDEBUG with KconfigDavid Brownell
Although the other USB driver directories got taught how use Kconfig and the Makefile to enable the debugging messages enabled by -DDEBUG, the gadget stack was overlooked. This patch remedies that omission, but doesn't update any drivers to remove previous idiosyncracies in this area ... other than the RNDIS code, which defined its own DEBUG() macro in a broken way. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12usb gadget stack: remove usb_ep_*_buffer(), part 2David Brownell
This patch removes controller driver infrastructure which supported the now-removed usb_ep_{alloc,free}_buffer() calls. As can be seen, many of the implementations of this were broken to various degrees. Many didn't properly return dma-coherent mappings; those which did so were necessarily ugly because of bogosity in the underlying dma_free_coherent() calls ... which on many platforms can't be called from the same contexts (notably in_irq) from which their dma_alloc_coherent() sibling can be called. The main potential downside of removing this is that gadget drivers wouldn't have specific knowledge that the controller drivers have: endpoints that aren't dma-capable don't need any dma mappings at all. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12usb gadget stack: remove usb_ep_*_buffer(), part 1David Brownell
Remove usb_ep_{alloc,free}_buffer() calls, for small dma-coherent buffers. This patch just removes the interface and its users; later patches will remove controller driver support. - This interface is invariably not implemented correctly in the controller drivers (e.g. using dma pools, a mechanism which post-dates the interface by several years). - At this point no gadget driver really *needs* to use it. In current kernels, any driver that needs such a mechanism could allocate a dma pool themselves. Removing this interface is thus a simplification and improvement. Note that the gmidi.c driver had a bug in this area; fixed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: pxa2xx_udc -- cleanups, mostly removing dma hooksDavid Brownell
Cleanups to the pxa2xx_udc code: - Primarily removing unused DMA hooks. - One "sparse" warning removed - Remove some Lubbock-only LED hooks (for debugging) That DMA code was never really completed. It worked, mostly, for IN transfers (to the host) if they were fortuitously aligned, but that code was never fully tested. And it was never coded for OUT transfers (which is where DMA would really help) ... because of chip errata on essentially every chip other than the pxa255, and because of design botches (nothing automated data toggle). So it's effectively been dead code for several years now ... no point in keeping it around. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: pxa2xx_udc: use generic gpio layerMilan Svoboda
This patch lets the pxa2xx_udc use the generic gpio layer, on the relevant PXA and IXP systems. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Don't resume root hub if the controller is suspendedAlan Stern
Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: fsl_usb2_udc: fix bug for portsc bit maskingLi Yang
Fix a bug that PORT_TYPE and PORT_WIDTH aren't masked correctly in portsc. Signed-off-by: Christopher Cason <chris.cason@nec.com.au> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12usb gadget: Rename husb2dev -> usbaHaavard Skinnemoen
husb2dev was the internal name of the USB Device Controller on AT32AP7000. Rename it to "atmel_usba", which is closer to the official name used in documentation and marketing material. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB Gadget driver for Samsung s3c2410 ARM SoCArnaud Patard
This patch adds the support for the Usb Device Controller on Samsung S3C24xx SoCs. This driver passes all tests from testusb (including #13) and has been tested on S3C2410, S3C24212, and S3C2440 SoCs. Whitespace updates, minor cleanups by David Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Herbert Pƶtzl <herbert@13thfloor.at> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: fsl_usb2_udc: Get max ep number from DCCPARAMS registerLi Yang
Currently the driver is expecting max ep number in platform data which isn't passing this information. This patch fix the problem by reading it from DCCPARAMS(Device Controller Capability Parameters) register. The change also need some reordering of the probe code. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: fsl_usb2_udc: replace deprecated irq flagLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Disable file_storage USB_CONFIG_ATT_WAKEUPTony Lindgren
Disable file_storage USB_CONFIG_ATT_WAKEUP as it requires user interaction during Chapter 9 tests. Signed-off-by: Tony Lindgren <tony@atomide.com Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: usb serial gadget, sparse fixesDavid Brownell
Fix a few serial gadget issues reported by the latest "sparse": some functions should have been defined as static, not just declared that way. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: export <linux/usb_gadgetfs> as <linux/usb/gadgetfs.h>David Brownell
Make sure gadgetfs userspace interface is properly exported: - Move <linux/usb_gadgetfs.h> to <linux/usb/gadgetfs.h>; - Export it using Kbuild; - Add an #include guard; - Correct some internal documentation; - Update struct layout so it's the same on 32/64 bit kernels. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: use function attribute __maybe_unusedDavid Rientjes
Substitute USB instances of __attribute__ ((unused)) functions with the newly introduced __maybe_unused. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: usb gadget, dead config cleanupDavid Brownell
Remove some dead CONFIG_ symbols, and document the status of a few others. The "gadget_chips.h" references are by and large to drivers which exist but haven't yet been submitted for merging to the main 2.6 tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: m66592-udc: fix use old interrupt flagsYoshihiro Shimoda
This patch fixes the problem that used SA_* flags. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: m66592-udc: peripheral controller driver for M66592Yoshihiro Shimoda
I would like to submit Renesas M66592 udc driver. The M66592 is Renesas USB 2.0 peripheral controller. This controller supports USB high-speed. The driver has been tested Gadget Zero, Ethernet Gadget, File-backed Storage Gadget, and passed usbtest script. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: add pci_try_set_mwiRandy Dunlap
As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: g_file_storage: call allow_signal()Oleg Nesterov
New changes in the signal-handling code require compensating changes in g_file_storage. This patch (as913) by Oleg Nesterov makes the code use allow_signal() instead of sigprocmask(). From: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: usb gadgets avoid le{16,32}_to_cpup()David Brownell
It turns out that le16_to_cpup() and le32_to_cpup() aren't always safe to call with pointers into packed structures, since those are inlined functions and GCC may lose the "packed" attribute. So those references can become unaligned kernel accesses, which are evil on some hardware. This patch updates uses of those routines in the gadget stack. The references into packed structures can just use leXX_to_cpu(*x), which in most cases is more natural. Some other uses in RNDIS, mostly in debug code, were wrong in the first place; those use get_unaligned(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warningLi Yang
Change PORT_WIDTH bit for UMTI_WIDE mode and fix a compile warning introduced in last revision. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-11[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.Andrew Victor
Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits) [ARM] Add comments marking in-use ptrace numbers [ARM] Move syscall saving out of the way of utrace [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header [ARM] mm 10: allow memory type to be specified with ioremap [ARM] mm 9: add additional device memory types [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6 [ARM] iop: add missing parens in macro [ARM] mm 7: remove duplicated __ioremap() prototypes ARM: OMAP: fix OMAP1 mpuio suspend/resume oops ARM: OMAP: MPUIO wake updates ARM: OMAP: speed up gpio irq handling ARM: OMAP: plat-omap changes for 2430 SDP ARM: OMAP: gpio object shrinkage, cleanup ARM: OMAP: /sys/kernel/debug/omap_gpio ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon ARM: OMAP: Enable 24xx GPIO autoidling [ARM] 4318/2: DSM-G600 Board Support [ARM] 4227/1: minor head.S fixups [ARM] 4328/1: Move i.MX UART regs to driver ...
2007-04-27USB: update gadget files for fsl_usb2_udc driverLi Yang
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB device driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add Freescale high-speed USB SOC device controller driverLi Yang
Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usb ethernet gadget, workaround network stack API glitchErik Hovland
Another workaround for the glitch in the network layer, whereby one call ignores the (otherwise kernel-wide) convention that free() calls should not oops when passed nulls. This code already handles that API glitch in most other paths. From: Erik Hovland <erik@hovland.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB gadget rndis: fix struct rndis_packet_msg_type unaligned bugWu, Bryan
skb_push function may return a pointer which is not aligned as required by struct rndis_packet_msg_type. Using attribute trick to fix this bug. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: gadget-storage needs BLOCKRandy Dunlap
With CONFIG_BLOCK=n, this build error happens: WARNING: "bdev_read_only" [drivers/usb/gadget/g_file_storage.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda
This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27pxa2xx_udc: cleanups, use platform_get_irqDavid Brownell
Make the pxa2xx_udc driver fetch its IRQ from platform resources rather than using compile-time constants, so that it works properly on IXP4xx systems not just PXA21x/25x/26x. Other updates: - Do that using platform_get_irq() - Switch to platform_driver_probe() - Handle device_add() errors - Remove "function" sysfs attribute and its potential errors - Whitespace cleanups Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>